kernel by page fault data

Similar Questions

• Error: 0xc000012f and the KERNEL DATA PAGE FAULT

  My son has a laptop of game.  Since last week, he experienced extreme problems.  A constant if the following errors: 0xc000012f and the KERNEL DATA PAGE FAULT.  Although I'm not technologically savvy, I tried the obvious in running virus scan and visiting different communities for troubleshooting tips.  When you run the antivirus (paid service) analysis, the system hangs and the system restarts.  I attended ASUS website in the hope of getting more advice than to have to provide access to the laptop of my son to a technician who gave me some insurance for the better part of 45 minutes that he help and troubleshooting problems.  He highlighted a very detailed chart of downtown action (reliable?), which looked pretty serious.  Suffice it to say, the conversation ended when he asked a one-time fixed fee of $200.  When I refused, he went to stop everything.  I would simply like to take any action that will further damage the laptop of my son. I paid $3K for this system.  Is someone can you please help me solve these problems?  I was going to buy a registry cleaner but was informed in an online community chat room not to do so that these products are not reliable.  Thank you all in advance for your review and taking the time to help me.

  Original title: need assistance immediately please.

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found here

  If you have any questions regarding the procedure, please ask

  
  

  I find the files DMP prayed and tried their zip.  I received the following: file not found or no read permission.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the 'hard drive' was "fried".  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB), this is the info on the box, to replace my 750Go son.  He said that, even if was less "room" it would "fly".  The original price was $ 200 and climbing!  Give me the question my faith in humanity at this time.  Is not relevant to the prey on someones lack of knowledge.  You and the other hand, all those who try to make a difference... who are trying to help is welcomed.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the "hard drive"was"French fries".»  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB - INFORMATION ON LISTED), to replace my 750Go son.  He said that even if it was less "room" it would "fly".  The original quoite was $ 200 and climbing! Give me the question my faith in humanity at this time.  Seems very inappropriate to prey on someones lcak of knowledge.  You on the other hand and those who try to make a difference... who are trying to help, should be commended.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

• I have a lot of activity of page file and page faults with 2.5 GB of RAM memory

  Hello

  I tried to find the reason for the slow performance on my pc and the limiting factor seems to be the activity of page file and errors of memory page. It is Win XP sp 3 with 2.5 GB of RAM and a processor 2.8 GHz (core). The task manager has never really shown a problem, memory use was rarely higher than 30%, around 10% page file use (I have the initial value, 3.5 GB 4 GB max) and CPU rarely hits 100%, but even when the task manager has revealed no particular problem the system shuts down sometimes for several seconds on starting the program or file to open. To follow the reason down I have installed a more detailed tracking software, which shows up to 1200 files page per second being transferred to or from the virtual memory and up to 8000 page errors per second during these breaks. This could be the cause, and if I can change all the settings to make more efficient memory management?

  Thank you

  My copy/paste standard when someone thinks PFs is / are part of their performance problem (but it's probably not...):

  I'm guessing that you see in the Task Manager and you have chosen to display the column of Page faults?

  If this is the case, given that the column of Page faults is not normally displayed if you activated, perhaps you are looking for some performance issue.

  A Page fault does not mean that there is a problem.

  A Page fault means generally that the application needs some data that are not in physical memory (RAM) at the time.  When the application needs some data that is not in the local memory and must recover from the paging file on the hard drive which is a way, you will see an error Page generated.

  Sounds kind of bad because it has the word 'Fault' in there, but it is really normal.  If you call your task manager after a reboot (do not use any browser), all applications are likely to have at least some page faults, even if you just restarted and "did not" do anything yet.

  Some applications may generate a few hundred or a few thousand Page Faults on a restart and then does not change.  The only thing in the task manager that will have zero Page faults is the system idle process, but this is a special case.

  Knowing what is a Page fault, you can understand that if your system does not have enough RAM for your operations, XP will need to move out to the pagefile often to get things he needs things there can be not in RAM when he needs.  Whenever she does this, you will have a Page fault.  The less RAM you have, more your applications will have hit the swap file to get their data, but you should be able to control some of this and you may even not notice "" the faults of Page at all--they happen all the time.

  So, one might think that if you turned off your pagefile and ran without a paging file, you would see zero Page faults in the Task Manager.  That sounds good, but this isn't the way things work.  XP works best when you have a system managed pagefile size (generally) the value if you probably won't work without a pagefile.

  You would always see Page errors in the Task Manager is because there are hard and soft Page faults Page faults, and you would see soft Page faults.

  A hard Page fault would be access to the disk paging file.  A soft Page fault would be just a shuffle or the reorganization of the things that are already in memory.  The Task Manager just them put everything in the column Page Fault and you can't make a difference.

  Given that the Task Manager offers two types of page faults in a single column you will need else with more granularity (such as performance monitor), tools that allow to separate Page faults in soft Page faults and performance monitoring of hard Page faults.    If you turn off your paging file and use Perfmon to split the Page faults on different types and follow them separately and have no pagefile, you see zero hard Page faults, but still see soft Page faults as a separate counter.

  I ran XP for a l-o-n-g time with only 256 MB of RAM and was quite satisfied with her for several years once I dialed things.

  Most your system and applications run, Page faults accumulate so that application until the application ends and restarted, then the Page counters error starts to the new and will keep goes upward, upward, toward the top and up - it does not mean necessarily you have a problem and PFs are not likely to be the cause of your performance problems.

  I do not think that you will see top-down but you can start them by restarting the application.

• Satellite C850-1NU - BSOD with Page fault in non paged area error

  So basically I was looking through the web on my laptop, and then suddenly I got a blue screen of death.
  It said Page fault in nonpaged area.

  Some people say it means that the RAM could be faulty.
  Is this true and if it is faulty should I take it back to PC world where I bought it?

  Thanks ;)

  Hello

  The BSOD could be caused by system problems or malfunction of the equipment.

  .. and Yes; the BSOD containing the paginated Page Fault in any area error could be related to memory problems, but it could also be a temporal problem that appeared one last time

  But if this BSOD will appear in the future for the umpteenth time, I recommend you contact the service partner to verify the material.

• Portege M400: update XP to Vista causes the page fault in nonpaged area

  I spent several hours working through the Vista upgrade only. After a restart the process, I get a BSOD now reporting a page fault. Microsofts advice was to regularize the upgrade and then try again. Useful (or not) This resulted in the same second time around. The office is now closed for the weekend, probably because no one gets questions Friday night / on weekends?

  There is a KB on support.microsoft.com (kb 939720) which refers to a similar problem and a fix, but you can not download it - you must call. All other users Portege had the same problem and how they have solved their?

  Concerning

  Chris

  Hello

  just a quick question: have you already installed the BIOS compatible Vista on your computer? It s one of the most important steps before installing the 'wonderful' on your drive Vista hard (I don't understand why you need but it s OK your machine... ;))

  If it isn't already, go to the website of Toshiba Driver download and download the latest BIOS for machine (Vista compatible) which is absolutely essential if you decided to put Windows Vista on your computer.

  Here´s the link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Would appreciate any comments about your situation.

  Greetings

• Page faults

  How can I reduce the number of PAGE faults as indicated in the Task Manager, some of my processes are completed 2Meg in size and it takes the computer up to 15 minutes before I have enough time cpu to use any application.

  Hi BevWest,

  The question you have posted is better suited in the TechNet forums. Please see the following link for more information.

  Windows XP IT Pro category

• PAGE FAULT IN NON PAGED AREA and IRQL not less or equal

  I left my computer on overnight to come on this morning to find the blue screen of death saying IRQL not less or equal - I tried access through safe mode, but I get PAGE FAULT IN NON PAGED AREA. I tried and it was crossed by the last setting but I just got IRQL not less or equal - it's the next day, I quit a game on last night though.

  Edit: I can't quite

  Have you recently updated the video driver or a service update update it? Try restarting with the VGA driver or last known good configuration.

  Tom

• Flex 4.5 allows multiple components of the page retrieve data in parallel?

  There are frameworks that allow several components of the page to go in parallel with multi threading. Framework of the new Flex 4.5 allows that several components of the page retrieve data in parallel? Because I think that there is no other framework that allows that several components of the page retrieve data in parallel.

  Needs of light on it. Thank you.

  If you mean, it allows you to perform several Web service calls at the same time (asynchronous), then the answer is Yes.  If you need complete a component that is located on another page before the user this page is displayed, you can use this:

  creationPolicy = "all" create the component before the user saw, so that you can use these components programmatically.

• Portege Z930 - BSOD kernel data by page fault

  Recently (3 days ago) my girlfriend bought Portege Z930, and she becomes BSOD kernel data in error page, randomly (battery or AC).

  Hardware config is: Core i3 Mobile i3-3217U, DDR3 4 GB, HD Graphics 4000, SSD 128 GB
  Software: it didn't install new programs, using the trial version of office, Google chrome and windows 7 64 bit which was pre-installed. Anyone have any idea, what could be the cause of bsod? Preinstalled software from Toshiba? Hardware malfunction?

  Also because off-topic information autonomy point is up to 5 hours (wifi on, light off, bright screen keyboard: 40%)

  On this virtual path, it is not easy to say what may be the problem. In my opinion, you should make data backup and install the OS by using HARD drive recovery option.

  After that do what you will have new own preinstalled OS. Test a few days without having to install anything just to see if the error appears again.

  Installation of HARD drive recovery operation, you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

• Data from the kernel page fault / Hanging CHKDSK / Missing Restore points

  I'm running a quad core 2.8 g with Vista 32 home premium.

  The last two days, my pc has been extremely slow start. Yesterday, I got 2 blue screens.

  first of all a kernel stack inpage error, second - kernel data Inpage Error

  0x0000007A (0xC0413DD8, 0c000000E, 0x63BOE860, 0x827BB58D)

  I also had a problem where McAfee maintained disabling direct scan. This problem has been fixed with a download from mcafee.

  I tried to do a system restore but found that all my restore points before the problem had disappeared.

  Virus analyses are turning to the high own.

  Attempted to run CHKDSK on the C drive, but it took 1.5 hours to reach stage 5-5 and hung up to 15%

  All my drivers and Windows is up to date. Recent change of system is only that I got a notification via update of windows that there is an update for my Gforce 9800 GX2 graphics card. I have tried to update the driver but had an error, because my current driver was more recent than what was pushing the windows.

  Looks like a disk, cable or controller error.  The easiest thing to check can be cable - make sure it is snug and replace it with a good known if possible.  0xc000000e STATUS_NO_SUCH_DEVICE - "a device which does not exist was specified."  Essentially, the data that are paged to disk could not be read because the device does not exist (or has ceased to be available).

• Data from the kernel page fault

  Hello

  I often have a blue screen on my windows machine 7: it shows a MISTAKE of PAGING of KERNEL DATA.

  I saw the other posts and apparently it can have several causes. I tried to check my drive for errors, but that has not solved the problem. Is someone can please help me troubleshoot?

  Thanks in advance!

  Noa

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Windows 8 kernel data page fault

  every time I log in I get a blue screen that the computer encountered a problem and needs to restart. She says it is a mistake to paging of kernel data. Here are the details: c:\windows\minidump\033113-30326-01.dmp

  c:\users\marleen\appdata\local\temp\wer-68702-0.SysData.XML

  c:\windows\MEMORY. DMP

  I had to have windows support staff to reinstall my windows 8 due to a virus?  I get this error reinstall it since.

  Thank you

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.
  
  http://www.Malwarebytes.org/products

• [WIN8] DATA FROM THE KERNEL PAGE FAULT

  Receive this error quite often, scoring several times a day. Recently, I have formatted which, if whatever it is done the problem pop up more often, but not sure.

  Here are a few DMP files, if the link works correctly [edit: zipped as the sow]

  http://1drv.Ms/1EGZVXn

  I have run chkdsk multilple times, still the error returns the same day.

  SN

  These accidents were related to the corruption of memory (probably caused by a McAfee).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You need not run memtest again unless you want to.
  

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)

  2-Memtest. (You can learn more about running memtest here)

  
  

  I would also update to win 8.1 as who can solve the problem by itself

• Windows 8 errors and Crash_ Page fault in non paged area + attempt to write a readonly database

  Hello

  I am running Windows 8 on my PC and have seen the Failure of Page in the nonpaged area error when starting and stopping down a few times.

  Recently, she was accompanied by an attempt to write a readonly database error starting up, which led to several auto-redémarre.

  Here is the link to download the Minidump files on my computer, if that would help.

  http://1drv.Ms/1nOJ8If

  Please guide me how to on this subject.

  Thanks in advance,

  Rohan

  Rohan

  These related to the 802.11 Wireless netr28x.sys adapt Driver Ralink Technology, Corp..  I would setup the possible latest driver even if it is the same date that drivers become corrupt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading file Dump [C:\Users\Ken\Desktop\New folder\061814-23656 - 01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff801 'f0c1b000 PsLoadedModuleList = 0xfffff801' f0ee7aa0
  The debugging session: Wed Jun 18 03:25:39.915 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:10.667
  Loading the kernel symbols
  ..

  Press (cdb, ntsd, kd) ctrl-c or ctrl-BREAK (windbg) to drop the charges of symbol that take too much time.
  Run! SYM noisy before .reload to track symbols loading issues.

  .............................................................
  ................................................................
  ...
  Loading user symbols
  Loading unloaded module list
  .....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88003a1e000, 1, fffff8800529b442, 0}

  WARNING: Unable to verify timestamp for netr28x.sys
  ERROR: Module load completed but symbols can be loaded for netr28x.sys

  Could not read the name of the problem driver
  Probably caused by: netr28x.sys (netr28x + 3e442)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88003a1e000, memory referenced.
  Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
  Arg3: fffff8800529b442, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  DUMP_FILE_ATTRIBUTES: 0X8
  Generated Triage of the kernel image

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff801f0f73168
  GetUlongFromAddress: cannot read fffff801f0f731f8
  fffff88003a1e000 non paged pool

  FAULTING_IP:
  netr28x + 3e442
  fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: AV

  Nom_processus: System

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff88000b89230-(.trap 0xfffff88000b89230)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff880039de000 rbx = 0000000000000000 rcx = 0000000000000282
  RDX = a 0000000 00000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff8800529b442 rsp = fffff88000b893c0 rbp = fffff88000b89540
  R8 = 0000000000000001 r9 = 0000000000000114 = 0000000000000000 r10
  R11 = fffff88000b89380 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  netr28x + 0x3e442:
  fffff880 ' 0529b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h ds:fffff880 ' 03a1e000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff801f0d363e5 to fffff801f0c75440

  STACK_TEXT:
  fffff880 '00b 89048 fffff801' f0d363e5: 00000000'00000050 fffff880 '03a1e000 00000000 00000001' fffff880' 00b 89230: nt! KeBugCheckEx
  fffff880 '00b 89050 fffff801' f0cafb2b: 00000000 00000001 "fffff880 '03a1e000 fffffa80' 0730eb00 fffff8a0'00000001: nt! : FNODOBFM: 'string' + 0x33c2b
  "fffff880 '00b890f0 fffff801' f0c72eee: 00000000 ' 00000001 fffffa80 ' b 0, 200000 fffff880 '00b 89400 fffff880' 00b 89230: nt! MmAccessFault + 0x55b
  fffff880 '00b 89230 fffff880' 0529b 442: fffffa80'0 b 200000 fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff: nt! KiPageFault + 0x16e
  fffff880 '00b893c0 fffffa80' b 0, 200000: fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff 00000000' 00000000: netr28x + 0x3e442
  fffff880 '00b893c8 fffffa80' b 0, 200000: fffff880'00 b 89540 ffffffff'ffffffff 00000000 00000000' fffff880'05291007: 0xfffffa80'0 b 200000
  fffff880 '00b893d0 fffff880' 00b 89540: ffffffff'ffffffff 00000000 00000000' fffff880'05291007 00000000 00000000': 0xfffffa80'0 b 200000
  fffff880 '00b893d8 ffffffff' ffffffff: 00000000 00000000' fffff880'05291007 00000000 '00000000 00000000' 00000000: 0xfffff880'00 b 89540
  "fffff880'00b893e0 00000000' 00000000: fffff880 ' 05291007 00000000 '00000000 00000000' 00000000 fffffa80 ' b 0, 200000: 0xffffffff'ffffffff

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  netr28x + 3e442
  fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: netr28x + 3e442

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: netr28x

  Nom_image: netr28x.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 531982e8

  FAILURE_BUCKET_ID: AV_netr28x + 3e442

  BUCKET_ID: AV_netr28x + 3e442

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_netr28x + 3e442

  FAILURE_ID_HASH: {5c6cc3bb-48d3-d6cb-422b-45f5619bcc52}

  Follow-up: MachineOwner
  ---------

• User cannot delete the computer accounts. I can only remove it from the login page. all data remains.

  It is Impossible to remove any user account. All that is possible is to remove access.

  All data remains as far as I can do.

  I had a tech from Microsoft to take control of my computer, added an account to address a problem.

  Very bad and useless idea. He was a novice at best. First tech level phone for 3.5 hours.

  Screwed up my computer even more. The problem was later supported by a level 2 technician.

  The problem was solved in 3 minutes! "Microsoft's answer is bad saddle' pay another $100"

  Stay on the phone for hours, by another of our complete Idiots again.

  So now I have more than one account sharing of data on a single account. Absolute mess.

  In the meantime a 3rd of my desktop icons to fed my table only.

  And if I open my documents or go to my pictures or anything in this access I have a triple

  amount of the choice of data to the left pane. No way to remove the Microsoft windows user account is the same as my main user account. Only removed from the log in page.

  I have no respect for windows, they are a rip off the t"If you have never herd of this situation I'm in it please help. I don't have a hundred other Dollars to give to windows without using online help.

  Hello

  Thanks for reaching out. We are here to help.

  Here are the steps that you can try to solve this problem:

  1. connect with the main administrator account: How can I connect administrator?

  2. Once you are connect to the main administrator account, click Start , then Control Panel.

  3. click on user accounts> adding / deleting account> choose the account to delete.

  4. click on remove account> choose delete files> click delete account.

  Let us know how it goes.