BSOD - Kernel_data_inpage_error 0x0000007a
The error is (0xc0203764, 0xc000000E, 0x22605BEO, 0x80DD9000). Quickbooks 2009 and Windows 7 install updates automatically. No other hardware or software changes have been made recently. Had nothing on the monitor, restarted (power off and then on) then computer windows normally and ran chkdsk. Then blue screen, as described case again, crashed. Started in safe mode, try to scan virus (Norton 360), but did not want to start scan. Help!
Control bug 0x7A: KERNEL_DATA_INPAGE_ERROR with errorSTATUS_NO_SUCH_DEVICE (0xc000000E). Check the cables of your HARD drive. Also check the HARD drive with a diagnostic tool for manufacturing.
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
Tags: Windows
Similar Questions
-
BSOD Stop: 0x0000007A (0xC000000E, 0xF758c825, 0XC03DD630, 0X337F8860)
For the last two weeks, I received a stop erro: on the BSOD kernel_data_inpage_error. I tried to fix according to the instructions, but it happens more frequently now. The technical info is as follows:
STOP: 0X0000007A (0XC000000E, 0XF758C825, 0XC03DD630, 0X337F8860)
NTFS.sys - address F758C825 base at F7539000, DateStamp 48025be5
Thank you
Hello
Error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.
Use the check disk command for all errors on the hard drive.
Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.
Use the drive control as follows:
1. click on start.
2. in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
3. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
4. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors if there is.NOTE: The root of the drive should be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
Warning of Chkdsk.
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
When chkdsk is finished, boot up to the desktop, and then check.You can check the link below for more details - mentioned
http://msdn.Microsoft.com/en-us/library/ms793989.aspxSee also:
http://support.Microsoft.com/KB/174630
I hope this helps. Let us know the results.
-
My windows 8 crashes with the error KERNEL_DATA_IN PAGE_ERROR. Any help with the mini dump file analysis?
Dump files and the information system are compressed here... https://www.dropbox.com/s/dh9tqmzmh5ofo7y/files.rar?DL=0
Hello
Error checking 7A, {4, 0, fffffa800476dd60, 64c43a2e30}
Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 246f4)
Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.
1. if you're overclocking anything STOP!
2. check with HP Support, their drivers and documentation online and ask questions in the forums about known problems. Update the BIOS, chipset drivers and major
device drivers embedded and separate (see methods of updating driver below).BiosVersion = F.26
BiosReleaseDate = 03/06/2014
SystemManufacturer = Hewlett-Packard
SystemProductName = HP Pavilion Notebook PC g6
Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
SystemVersion = 087C 110014385910000620120
SystemSKU = C7N61UAR #ABA
BaseBoardManufacturer = Hewlett-Packard
BaseBoardProduct = 183F
BaseBoardVersion = 56.32HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/3 carefully check for malware (see next answer).
4 use all other methods in the troubleshooters below if necessary.
5 if necessary run the Driver Verifier to see if it can indicate a CAUSE (see Driver Verifier
methods below).====================================================
In 'some' case will help this article.
Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
online systems), their resources and the drivers and ask in their forums (if any)
on known problems. Don't forget to update BIOS, drivers of low level chipset,
and the other pilots of major on-board and separate devices. Those who alone can
set all or part of these issues.========================================================
Do you use a SSD? Or RAID? Check "EVERYTHING" on the hard drive, controller and wiring (from the discontinuation of ALL power first).
-----------------------------------------------------------------------------------------------Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Translate Windows 7 methods and use them on Windows 8/8.1
Resolution of the blue screen in Windows 8/8.1 errors
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
steps of shooting.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7========================================================
BCCode: 7A 0x0000007AThe main causes of this error are virus/malware, drivers, memory, and disk damage. And it may even be combinations of those so meticulous control of all is necessary. Added the possible causes are clerical errors such as the motherboard damaged or other materials.
BCCode: 7A 0x0000007A
BCCode: 7A 0x0000007A<-- read="" this="" link="" read="" this="">
* 1137.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR<-- read="" this="">
http://msdn.Microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspxSee also - control bug 0x77 (KERNEL_STACK_INPAGE_ERROR)
------------------------------------------------------------------------------------------------
It's my generic how updates of appropriate driver: (updated all the drivers and BIOS)
This utility, it is easy see which versions are loaded: run DriverView - VIEW driver Microsoft set hide - update those without drain in their names (and the BIOS and chipset drivers).
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.
Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.
Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmWindows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWindows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly----------------------------------------------------------------------------------------
Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.
To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.orgFor the Windows Memory Diagnostic tool.
WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.How do I Run the diagnosis of memory Windows 7 (and 8) - in Windows 8 the
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html======================================================
After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpYou can disable the driver verifier
http://support.Microsoft.com/kb/244617WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with MyEventViewer when the blue screen.
If DriverVerifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it=""> -
Windows 8: get randomly BSOD kernel_data_inpage_error
Hi Microsoft community. The laptop that I use an Asus F501A with Windows 8 (not 8.1 as the download of the update always gives an error), randomly gives a BSOD with a "kernel_data_inpage_error". When people ask me to use chkdsk I do, but the problem is still there.
Where should I start to solve this problem?
Thank you!
All attached files of the DMP are (7A) KERNEL_DATA_INPAGE_ERROR bug check.
This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.
7 has error checking, {4, 0, fffffa8006e836c0, fffff8a009891980}
-ERROR_CODE: (NTSTATUS) 0 - STATUS_WAIT_0
---------------
You have two suites antivirus installed, is to create conflicts and causing memory corruption.
Remove and replace Avira and Windows Defender in Windows 8 integrated McAfee for temporary troubleshooting purposes:
Avira - removal http://www.Avira.com/en/support-for-home-Knowledgebase-detail/kbid/88
Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331
Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html
Kind regards
Patrick
-
Windows BSOD KERNEL_DATA_INPAGE_ERROR 8; Ntoskrnl.exe + 7 has 040
Hello world
I had reinstall Windows 8 last month cause too many errors with the Windows 8 and I had still BOSD arrives with a new installation of Windows 8.
The last that I have no will is this one:
KERNEL_DATA_INPAGE_ERROR
Ntoskrnl.exe + 7 has 040
We arrive in surfing on the web and burning with IMGBURN. Many Disconnections occur when you use the dvd burner.
The other at the moment that I solved is "atikmpag.sys" I read on the net that I need to update the file from a download of catalyst frensh.
Here all DUMP files and the news of the computer:
All files: https://skydrive.live.com/redir?resid=10F449F32E80D9B2! 390
Thank you!
8ternity
They were related to the following
KERNEL_DATA_INPAGE_ERROR (7A)
The requested page of kernel data could not be read in. Is usually caused by
a bad block in the disk controller or paging file error.My gut feeling is that it is one of these drivers or your moy. I would like to update the drivers and replace AVG with the built-in Defender
000 fcl 26/09/2008 09:11:22
ksaud.sys 2010-07-14 06:12:54
ntk_PowerDVD_64.sys 03/08/2010 05:04:12
PxHlpa64.sys 2011-10-17 10:29:34
amdsbs.sys 21/02/2012 14:15:43AVG can be a cause of BSOD.http://www.Avg.com/us-en/utilitiesHow to find drivers:
-Google search for the name of the driver
-compare Google results with what is installed on your system to determine on what device/program, it belongs to
-Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right programThe most common drivers are listed on this page: driver reference
http://www.carrona.org/dvrref.php
-Driver manufacturer links are on this page: http://www.carrona.org
-
Spaceport.sys BSOD KERNEL_DATA_INPAGE_ERROR
Hello.
I got the BSOD twice in the last two days at seemingly random times. I did research online and discovered that it could be due to problems with the hard drive. I'll do a chkdsk soon but here is my question: spaceport.sys shows here? Can this be any problem other than the HARD drive? What causes these problems with the HARD drive?
Hello
To help you, we will need for the. DMP files to analyze what exactly happened at the time of the accident, etc.
If you do not know where. The DMP files, here's how to get to them are:
1. go to the folder % systemroot%\Minidump.
2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.
3. download the zip containing the. Files DMP Onedrive or a Web hosting of your choice and paste it in your answer. Favorite sites: Onedrive, Mediafire, Dropbox, etc.. Anything with waiting-timers.
4 (optional): The type of. DMP files in the Minidump folder are known as small images of memory. In any % there will be what we call a kernel image (if your system is configured to generate). It is labeled MEMORY. DMP. The difference between the small images of memory and core-dumps in the simplest definition is that a kernel image contains much more information at the time of the accident, which allows more debugging of your question. If your upload speed and you're not going against any strict caps bandwidth and/or use, etc., the kernel image is the best choice. Note that the core-dumps are much larger in size due to containing much more information, that's why I mentioned the download speed, etc..
If you plan to use Onedrive but don't know how to download it, please see the following:
Download pictures and files to Onedrive.
Please note that all programs "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove. DMP files after use.
If your computer does. DMP files, follow these steps:
1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.
2 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."
3 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.
Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.
4. ensure that viewers is ENABLED:
Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.
If you can not get into normal mode to do this, please do so via Safe Mode.
Kind regards
Patrick
-
Original title: Kernel_Data_Inpage_Error on Windows 8.
Hello
A few days ago my laptop continued to restart on its own, turning to a blue screen with a message saying: "Kernel_Data_Inpage_Error". Given that this happened that the sound no longer works on my laptop, I tried to update my laptop to Windows 8.1 to see if that could help solve the problem, but when he started to install my laptop itself restarted each time.
Do you know what I can do to fix this?Please get back to me on that.
Thank you.Mitch
It works
First thing. I would update to win 8.1 when you have solved the problem
These accidents were related to the corruption of memory (probably caused by a driver).Please run these tests to check your memory and find which driver is causing the problem.
If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
Since then, it is more likely to be a pilot run everything first.1-Driver Verifier (for full instructions, see our wiki here)
If the auditor does not have the issue we move to it.2-Memtest. (You can learn more about running memtest here)
If you cannot start after you have enabled the auditor reboot in safe modeIn Vista & victory (F8)
Co-written by JMH3143.
-
Win 8 BSOD kernel_data_inpage_error
Hi there I get often around 3-8 instances of the error above, every day, my laptop starts up and seems to work correctly, the error often takes place when my laptop is not in use. I often leave for 30mins back and found she had to restart.
I attatched my together minidump files & MSinfo, if someone is able to take a look and point me in the right direction.
Thank you very muchhttps://SkyDrive.live.com/redir?RESID=F39BAC36C9712EDF! 115 & authkey =! AFx9SjkmTp_WjvI - minidump
https://SkyDrive.live.com/redir?RESID=F39BAC36C9712EDF! 116 & authkey =! AKwV8Gk4Y7QWcVg - msinfoHello
We have two major bugs of depressed attached:
KERNEL_DATA_INPAGE_ERROR (7A)
The data page of the kernel of the required paging file could not be read into memory.
Windows could not read a file from disk which is supposed to be there. It may indicate that the hard disk has bad sectors, problems of material (disk, controller, memory), an infection by the virus or a bug in a device driver.
and
CACHE_MANAGER (34)
This indicates that a problem has occurred in the file system cache manager.
A possible cause of this bug check is the depletion of memory pool non paged. If the nonpaged memory is exhausted, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, another driver in nonpaged kernel memory in pool mode may also cause this error.
FUJ02B1.sys - Wed Nov 01 05:50:43 2006
^^ The driver Fujitsu FUJ02B1 2006. Too old for Windows 8. Should be updated as soon as possible if possible from here - http://ts.fujitsu.com/support/downloads.html
or remove the device using this driver for troubleshooting purposes.
Run a chkdsk command to make sure that none of the defective areas with your hard drive, etc.:
Start > Search bar > type cmd right click and select run as administrator
High CMD should now be open, type the following:
CHKDSK x: /r
x involves the reader of your letter, so if your hard drive in question is the letter c, it would be:
CHKDSK c: /r
Restart the system and allow to run chkdsk.
Well, if chkdsk run Seatools - http://www.seagate.com/support/downloads/seatools/
Run everything EXCEPT: difficulty all Long credits, and whatever it is advanced.
Kind regards
Patrick
-
[SOLVED] Windows 8 BSOD - KERNEL_DATA_INPAGE_ERROR
Hey everybody, this is my first time on the forum and I have very frequent (about once to three times a week) blue with an associate of screening diagnostic KERNAL_DATA_INPAGE_ERROR and all diskchecks and memory, I have come to nothing. I downloaded a zip file of Minidump on my onedrive containing all my recent minidumps for viewing and I was wondering if someone could please check and see what is the problem? It drives me crazy right now and I can't stand it.
https://onedrive.live.com/redir?RESID=C75CC3F3D7432620! 2644 & authkey =! ADmyIjDBiCgDm4A & ithint = % 2czip
Thank you!
SOLUTION
Hey guys,.
So, it's a few months since the last response and a little more than 4 months since I created the thread, but I am happy to say that I could solve the problem on my own. As I suspected, it was related to the hard drive, but not because the hard drive was defective. I opened my laptop and realized that the SATA connector was only at half way pushed. It seems that one of the pins to keep the SATA cable was loose and would not stay, so I just put a little bit of Chatterton to prevent it from slipping again. Now, it has been 3 weeks and I have been without incident. I can't believe it took me so long to figure it out, but better late than never.
I hope that someone else with the same problem falls on this thread and is able to take advantage of my solution. It is unlikely that this a problem with all models of this laptop, but only in this case, it is for an Acer Aspire V7 582PG. Image of the source of the problem is below.
-
KERNEL_DATA_INPAGE_ERROR message
Recently I was away for two weeks and my system was closed all the time. My system was working fine when I left. No software or hardware has been added. Nothing has changed. When I came back, I started getting the following message with a BSOD: KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A (0xC0000185, 0 x 80572092, 0xC0402B90, 0x18F08860). I have unplugged everything except the monitor, keyboard and mouse, but the problem remains. No idea how to solve this problem?
Not without more information. Well... no good ideas.
Your system is a Compaq Presario V4440 or is it a gateway FX6803?
Are you running XP Professional SP2?
is your antivirus/antimalware currently Norton or McAfee?
Here are some ideas of an engineer of Microsoft Support previously marked as 'response' - see how these things work for you:
Step A.
Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.See the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222Step B.
You need to perform a clean boot to find the program that is causing and then disable or remove.How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-usStep C: make SFC scan on the computer.
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, the following line, and then press ENTER:
sfc/scannowNote: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
Please note that if the idea of the engineer of Microsoft Support for try sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.
Until 14, I'm zero dollar.
-
HP Compaq 8100 blue screen - server operating system
We had a Hewlett-Packard / 8100 Elite SFF PC, installed Windows Server 2008 R2 Enterprise 64-bit edition and we are using as Team Foundation server (installed Team Foundation Server 2010) and containing approximately 25 team projects with 50 users who access this server, the server with 4 GB ram and Intel Core i5 750 2.67 GHz CPU processor. The problem is its fair in blue screen and restart. The system is in place to this day because we lack of WSUS and it automatically updates all the servers.here I'm asking an error log created using this software bluescreenview , due to this blue screen, we are facing a lot of problem .the below list of crash is created using above software and generated as HTML page but I can not post sound also exaced so I stuck text help, please
List of crash
Dump File Crash Time Bug Check String Bug Check Code parameter 1 parameter 2 parameter 3 parameter 4 caused by the pilot caused by address Description of the file product name company File Version processor Crash address stack address 1 stack address 2 stack address 3 name of the computer full path County of processors Major Version minor Version size of the dump file Dump of the file
82462 052113 - 01.dmp 21/05/2013 07:56:28 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000001 00000000' fffff800'01ed6ac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT Kernel & system of operating system Microsoft® Windows® Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\052113-82462-01.dmp 4 15 7600 288 016 21/05/2013-08:04:43
050313-73148 - 01.dmp 03/05/2013 15:20:40 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000001 00000000' fffff800'01e9cac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT Kernel & system of operating system Microsoft® Windows® Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\050313-73148-01.dmp 4 15 7600 288 016 03/05/2013 15:27:46
032513-47751 - 01.dmp 25/03/2013 19:30:20 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000001 00000000' fffff800'01e8aac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT Kernel & system of operating system Microsoft® Windows® Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\032513-47751-01.dmp 4 15 7600 288 016 25/03/2013 19:46:17
031713-41948 - 01.dmp 17/03/2013-17:17:49 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000001 00000000' fffff800'01ea2ac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT Kernel & system of operating system Microsoft® Windows® Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\031713-41948-01.dmp 4 15 7600 288 016 17/03/2013-17:26:13
031613-47408 - 01.dmp 2013/03/16 04:24:16 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000001 00000000' fffff800'01edcac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT Kernel & system of operating system Microsoft® Windows® Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\031613-47408-01.dmp 4 15 7600 288 016 16/03/2013-04:33:45
021713-80746 - 01.dmp 17/02/2013 20:39:37 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000001 00000000' fffff800'01cd0ac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT Kernel & system of operating system Microsoft® Windows® Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\021713-80746-01.dmp 4 15 7600 292 144 17/02/2013 20:47:11
012213-80590 - 01.dmp 22/01/2013 04:09:11 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000001 00000000' fffff800'01ce2ac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT Kernel & system of operating system Microsoft® Windows® Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\012213-80590-01.dmp 4 15 7600 288 016 22/01/2013 04:17:35
010913-49530 - 01.dmp 09/01/2013-08:59:41 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000000 00000001' fffff800'01cd6ac1 ntoskrnl.exe ntoskrnl.exe 71f00 NT Kernel & system operating system Microsoft® Windows® Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\010913-49530-01.dmp 4 15 7600 288 016 09/01/2013 09:09:19
123112-24804 - 01.dmp 31/12/2012-03:30:02 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000000'00000001 fffff800'01c9aac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT kernel & system Microsoft® Windows® operating system Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\123112-24804-01.dmp 4 15 7600 288 016 12/31/2012 03:40:34
120312-43976 - 01.dmp 03/12/2012 01:14:13 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000000'00000001 fffff800'01aeaac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT kernel & system Microsoft® Windows® operating system Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\120312-43976-01.dmp 4 15 7600 292 144 12/3/2012 01:29:08
111812-53243 - 01.DMP 18/11/2012-02:07:10 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000004 00000000'00000002 00000000'00000001 fffff800'0189aac1 ntoskrnl.exe ntoskrnl.exe + 71f00 NT kernel & system Microsoft® Windows® operating system Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\111812-53243-01.dmp 4 15 7600 312 816 11/18/2012 02:24:51
"022912-108171 - 01.dmp 29/02/2012 01:02:50 KERNEL_DATA_INPAGE_ERROR 0x0000007a fffff6fc ' 80613920 ffffffff ' c000009c 00000000' 9853e880 fffff900'c27249f0 ntoskrnl.exe ntoskrnl.exe + 71f00 NT kernel & system Microsoft® Windows® operating system Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713 - 1255) x 64 ntoskrnl.exe + 71f00 C:\Windows\Minidump\022912-108171-01.dmp 4 15 7600 279 248 2/29/2012 01:21:05My money is on the patch Microsoft held for the same problem on Windows Server 2008 R2 SP1 or the disk hard diagnosis showing an imminent failure. There is a thread on the issue in the Microsoft Windows Server forums. I have gottten this information for you earlier, but I had to download and reload symbols for my degugger of Windows file run the dump file. You have certainly provided enough dump files.
Te followning image is one of the minidumps showed me. Alternatively, you can consider running on your hard drive.
View your results.
Best regards
ERICO -
The code of error BSOD 0x0000007a: KERNEL_DATA_INPAGE_ERROR.
Original title: 30 + hours of chkdsk on a hard disk of 1 TB and no indication of progress
Have an ASUS PC (care not available at this time). Home work to discover has recovered from a blue screen crash. The code indicates anything a Windows software for a chip failure problem RAM or motherboard.
Decided to check the disc with recovery of bad sectors option. It has been approximately 30hrs and all I have is a blinking on-screen cursor: no indication of text on what is happening or what stage it is during the process. It's an old PC with a 1 TB hard drive. Don't know mghz speed but the processor is powerful enough to play in the COD, Skyrim and other games.
Any recommendations would be greatly appreciated. Thank you in advance.
Hello
Sorry for the late reply.
According to the newspapers of file dump, error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.
If the problem persists, try the methods provided in the link below:
Resolution in Windows 7 stop errors (blue screen) .
http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Please let us know the status of the issue so that we can help you further.
-
I had this problem with my computer, running Windows Vista Home Premium 32 bit, for several months now, where it will show the blue screen of death shows the error message above. It will be at random times, it seems to just freeze and sit there for a few minutes and then display the error message. I tried chkdsk, System Restore, defragment the HARD disk, running analysis antivirus/antispyware, security scans, check the registry errors, have all the updates and everything I can think of nothing. I saved some of the previous error messages that he brang upward in the same way if they can help with what either.
* [date - 16/06/09; 8:00p.m.] KERNAL_DATA_INPAGE_ERROR
Stop: 0x0000007A (0xC0415BBO, 0x000000E, 0x35AED860, 0x82B76000)
Storport.sys - address 82B 76000 based B 82, 41000, Datestamp 49e01ef7.* [day - 17/06/09] Stop: 0x0000007A (0xC000000E, 0x259268C0, 0xC0438A40, 0x87148EC4)
* DRIVER_STATE_POWER_FAILURE
Stop: 0 x 00000095 (0 x 00000003, 0x83AD8B70, 0x8560D2B0, 0 x 84417808)* [day - 27/08/09] DRIVER_STATE_POWER_FAILURE
Stop: 0x0000009F (0 x 00000003, 0x8611E030, 0x8611E030, 0xAS09E5B8)Pura9910
Hello
If a PC you can try reseating all the memory cards and cables (both ends) - are not just tight - actually remove
and replace. Remove ALL power before opening the case.95 is a Plug n not specified ' error to play and no help.
9F is usually power associated - powersupply thouugh, there might be question of device or driver and antivirus related.
7A
Cause
Frequently, you can determine the cause of the error status (parameter 2) KERNEL_DATA_INPAGE_ERROR bug check. Some common status codes are:
- 0xC000009A or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of non-paged pool resources.
- 0xC000009C or STATUS_DEVICE_DATA_ERROR, generally indicates bad blocks (sectors) on the hard disk.
- 0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose wiring, termination or that the controller does not see the hard drive.
- 0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.
- 0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.
These status codes are common ones that have specific causes. For more information about other possible status codes that can be returned, see the Ntstatus.h file in the operating system Microsoft Windows Driver Kit (WDK).
Another common cause of this error message is the defective material or failing RAM.
A virus infection can also cause this bug check.
Solve the problem
Solve a problem of bad block: Generally, a status I/O of 0xC000009C or 0xC000016A code indicates that the data can not be read from the disk due to a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and tries to map the bad sector so that it is more used.
If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.
Warning If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.
Solve a defective hardware problem: If the State of e / is C0000185 and the paging file is on a SCSI disk, check the cabling and SCSI termination for problems.
Solve a problem RAM failure: Run the hardware diagnostics feeding by the system manufacturer, especially the memory scanner. For more information about these procedures, see the manual of your computer.
Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.
Check the system log in Event Viewer for additional error messages that might help identify the device that is causing the error. You can also disable caching memory BIOS to try to resolve this error.
Make sure that the latest Windows Service Pack is installed.
If the previous steps do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can cause this error.
Solve an infection by the virus: Search your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.
--------------------------------------------------------------------------
It's my generic bluescreen convenience store which may help.
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
There are a couple of weeks, I started to meet the BSOD with KERNEL_DATA_INPAGE_ERROR.
Original title: KERNEL_DATA_INPAGE_ERROR
Well a few weeks earlier, soon as I bought this new computer, I started to meet the BSOD with KERNEL_DATA_INPAGE_ERROR. I am running Windows 7 on a laptop Asus G60JX. Not long after the first time it happened, I looked at the problem and ran a disk check to find only my computer would start is more upward. I decided to reformat my computer and everything worked well again for about 2 weeks and now it is happening again. My computer starts well but every once in a while the mouse will stop working and it will go to the BSOD and say something on the dumping of physical memory. When I start my computer upward, it says this area solution, or whatever.
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033More information about the problem:
BCCode: 7A
BCP1: 0000000000000020
BCP2: FFFFFFFFC000009D
BCP3: FFFFFA800719E7C8
BCP4: 0000000000000000
OS version: 6_1_7600
Service Pack: 0_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\070610-16957-01.dmp
C:\Users\Spencer\AppData\Local\Temp\WER-58999-0.SysData.XMLRead our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtAny help would be appreciated. Thank you.
You said Details of the bugcheck 0x7a - KERNEL_DATA_INPAGE_ERROR - "this bug check indicates that the data page of the kernel of the required paging file cannot be read in memory." It is usually an indication of a failing drive. Error code was met was "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or loose, termination or that the controller does not see the hard drive."
However, you can check "you receive various Stop in Windows 7 or in Windows Server 2008 R2 error messages when you try to resume a computer that has a large hard drive SATA" and see if the fix applies to you.
-
STOP: 0x0000007A - new large hybrid drive; no model BSOD
I put a 1 to Seagate hybrid drive in a Samsung R580 laptop and reinstalled Windows 8 House (64-bit).
I now get to chance the Kernel_Data_Inpage_Error with the following code:
STOP: 0X0000007A (0XFFFFFFFFC000000E, 0X000000000DFE1860, 0XFFFFF6FC40006E00, 0XFFFFF88000DC0630)
Partmgr.sys address FFFFF88000DC0630 base at FFFFF88000DB2000, DateStamp 4f641bc1
Clearly, this means something, but how can I know what it means? Googling, it does not reveal anything!
I thank very you much in anticipation.
HelloDo you use a SSD? Or RAID? Double control "EVERYTHING" on the hard drive.
controller and wiring (from the discontinuation of ALL power first).
--------------------------------------------------------------------------------------------------------------Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available the onedrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialA disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
BCCode: 7A 0x0000007A
The main causes of this error are virus/malware, drivers, memory, and disk damage. And
It may even be combinations of those so meticulous control of all is needed. Possible addition
the causes are such as the motherboard damaged material errors or other materials.BCCode: 7A 0x0000007A
Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR
The KERNEL_DATA_INPAGE_ERROR bug control has a value of 0x0000007A. This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.Important info if you received a STOP Code
If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
These actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
KERNEL_DATA_INPAGE_ERROR parameters
The four parameters that are listed in the message can have three possible meanings. If the first parameter is 1, 2 or 3 and the third parameter is 0, the parameters have the following definitions.
Parameter Description 1
The type of lock which took place (1, 2 or 3)
2
The error status (usually a State of I/O code)
3
If lock Type is 1: the current process
If lock Type is 2 or 3: 0
4
The virtual address that could not be paged into memory
If the first parameter is 3 (and the third parameter is nonzero) or 4, the parameters have the following definitions.
Parameter Description 1
The lock type that was held (3 or 4)
2
The error status (typically an I/O status code)
3
The address of the InPageSupport structure
4
Failing address
Otherwise, the parameters have the following definitions.
Parameter Description 1
The address of the page table entry (PTE)
2
The error status (usually a State of I/O code)
3
The PTE contents
4
Failing address
Cause
Frequently, you can determine the cause of the error status (parameter 2) KERNEL_DATA_INPAGE_ERROR bug check. Some common status codes are:
0xC000009A or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of non-paged pool resources.
0xC000009C or STATUS_DEVICE_DATA_ERROR, generally indicates bad blocks (sectors) on the hard disk.
0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose wiring, termination or that the controller does not see the hard drive.
0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.
0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.
0xC000000E or STATUS_NO_SUCH_DEVICE, indicates a hardware failure or an incorrect drive configuration. Check your cables and check the disk with the available from the manufacturer of your drive diagnostic utility. If you use old PATA (IDE) disks, this status code may indicate a bad master/subordinate drive configuration.
These status codes are common ones that have specific causes. For more information about other possible status codes that can be returned, see the Ntstatus.h file in the operating system Microsoft Windows Driver Kit (WDK).
Another common cause of this error message is the defective material or failing RAM.
A virus infection can also cause this bug check.
Resolution
Solve a problem of bad block: Generally, a status I/O of 0xC000009C or 0xC000016A code indicates that the data can not be read from the disk due to a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and tries to map the bad sector so that it is more used.
If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.
WARNING if your system partition is formatted with the FAT file system, the long line that names the windows operating system uses could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.
Fix a defective hardware problem: If the State of e / is C0000185 and the paging file is on a SCSI disk, check the cabling and SCSI termination for problems.
Resolve a problem RAM failure: run the diagnostics of material feeding by the system manufacturer, especially the memory scanner. For more information about these procedures, see the manual of your computer.Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.
Check the system log in Event Viewer for additional error messages that might help identify the device that is causing the error. You can also disable caching memory BIOS to try to resolve this error.
Make sure that the latest Windows Service Pack is installed.
If the previous steps do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can cause this error.
Solve an infection by the virus: check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.See also - control bug 0x77 (KERNEL_STACK_INPAGE_ERROR)
BCCode: 7A 0x0000007A<-- read="" this="">
* 1137.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-=============================
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and use scanners online and other methods.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGEAdwCleaner
http://www.bleepingcomputer.com/download/adwcleaner/
Run the malware removal tool from MicrosoftStart - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxScan online ESET
http://www.eset.com/onlinescan/Scan Kaspersky online
http://www.Kaspersky.com/virusscannerOther tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
=======================================
=======================================Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind more slowly
memory. So it is best to also exchange the rods in and out to check these even if all memory
tests fail show a problem.To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.orgFor Vista/Windows 7 memory diagnostics tool
Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructionsWindows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html----------------------------------------------------------------------------------------
Could be a driver related issue however less inclined than memory. Update your drivers
manually looking at system and sites of the manufacturer of the device manufacturer.References to Vista also apply to Windows 7.
It's my generic how updates of appropriate driver: (look for updates to the BIOS and the driver).
This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
for the drivers Microsoft hide - updated those without drain in their names. (Also updated
the BIOS and chipset drivers.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
Maybe you are looking for
-
Change the colors of highlight preview
Is it possible to set different colors for the function of highlight in the preview instead of system colors? Yellow is ugly and unnecessary, because it's too pale.
-
Why did the game of hearts programmed to cheat?
For example: when a cat is directed, one of hands sometimes will not reject a cat but reject another sequel. Then in one hand later reject the Queen of spades.
-
Why there is no bass boost option with realtek audio?
OK, so I've had this issue for months, but I couldn't find an answer. On my laptop, there is a variable bass boost option when I click with the right button on my headset in sound and go options for improvements. While on my desktop, which uses integ
-
where can I find the drivers for a fingerprint reader?
is
-
11g ODI identifier is too long on source ORACLE
HelloI just migrated to ODI 10 ODI 11 g g but it seems that one of my script doesn't work. Whenever I run, I have the following error message:ODI-1227: SS_0 (load) task fails on the source of connection ORACLE POMCaused by: java.sql.SQLSyntaxErrorExc