Keyboard Microsoft Wireless 2000 does not
Original wireless keyboard title: microsoft shuts down
Microsoft wireless keyboard shuts
Double happy post-
Hello
1. when the keyboard stop working?
2. do you get an error as well? If so, what is the full message?
3. have you done any software or hardware changes on your computer before this problem?
Method 1:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
NOTE: the link also applies to the 2000 wireless keyboard.
See also:
2000 wireless keyboard
http://www.Microsoft.com/hardware/en-us/d/wireless-keyboard-2000
Hope the information is useful.
Tags: Windows
Similar Questions
-
Microsoft VX 2000 does not work with windows 7
I bought a webcam Microsoft VX 2000. It does not work with windows seven, when I use windows live messenger.
I configured my device tested and it works, but if I try to have a video conversation of the webcam does not light. Ive gone in the tools and video microphone works fine, but when it comes to have a convo with someone the video does not start and so the other person can't see me. It works with Skype etc but not windows live messenger
Hello smiffyinspain,
The question you have posted is related to Windows Live and would be better suited to the Windows Live Help community. Please visit the link below to find a community that will provide the best support.
http://windowslivehelp.com/community/
Kind regards
Savan - Microsoft technical support.
-
Spectrum HP convertible x 360 13: Microsoft Wireless Display does not connect
I just got my HP Convertible spectrum x 360 13 and may not have to connect to my Microsoft Wireless Display Adapter. Both are brand new. The spectrum sees the adapter, but it errors when it tries to connect.
Can you tell me the type of card that was working properly? (In other words, is specific to the a display adapter and another of the same type, at work, it worked very well - or the other was a different type?)
-
Desktop elite keyboard 1011 Microsoft Wireless model does not install the drivers please help
well, I have a model of elite microsoft 1011 wireless keyboard and a wireless microsoft 1012 receiver model (it's a combo with a mouse, but is he missing)
My problem is that I installed windows 7 x 86(32 bit) and I tried to plug right in my keyboard wireless via reciever.at first the 3 LEDS that have notified when keys locking are activated cycle first.
After that he was known as 3 times it stopped.i unplugged the receiver thenreplugged in.this timw there no same cycle.
I opened Device Manager to check the drivers.it been regestering unknown so I googled the names and found the microsoft drivers (don't know if it's maybe for a newer version on or not, he had the series in the installation) I installed them I clicked on one that says Microsoft elite wireless keyboard then install.after knowing it was installed I opened dev.manager and check to see if it helped it was always regestered as unknown so I restarted my computer and check again, but the same
any help would be useful
If I remember correctly he did for win98/xp
Oh, this is for her tech data sheets
Sorry if the question is already asked that I tried to be as straight as I could be
http://docs.google.com/viewer?a=v&q=cache:pXBz4ER-bMwJ:download.microsoft.com/download/3/b/e/3beedec5-0835-42b4-bfdf-0084f6d6d530/TDS_WirelessOpticalDesktopElite_0502A.pdf+microsft+desktop+wireless+keyboard+1011&hl=en&gl=us&pid=bl&srcid=ADGEESiy7Tv5ivEWg0Bq76vRRMyn28r2TtQFEk-z0Fzsw6R3zP8KsdqKh4mIxpYdE2tNp3EJ2QE4Fz1BwySrv_czKk_0fCB-ES0zHUaVjO1unTtsjoUdq56qWeT_iuGS0FP7neq_JHXh&sig=AHIEtbQUklfEshI_IP9Z_3X-A9uGsTXYsw
If you have yahoo messenger installed on your computer send me a message if you have anything I can try this * address email is removed from the privacy *.The 7.10.344.0 driver version is the one offered to the keyboard itself.
For office all the proposed version is ITPx86_1033_7.00.260.0.exe.
You have a line of brief and clear view between the dongle and the keyboard? The signal may be weak or the dongle damaged the transfer to the new system.
-
Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly.
Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly. The mouse does not allow me to use the wheel to scroll down to option and when I look at the drop down list, it does not keep list open. It opens and closes the list immediately. He continues to return the list to the top of the drop-down list. I checked the batteries in the keyboard and the mouse (replaced) resync'ed the two keyboard and mouse ports changed the receiver performed in and checked for update on both keyboard and mouse and have restarted my computer several times and it still does not work properly. I bought this Office Microsoft Wireless Keyboard and mouse 6000 V2 there are three 3 months and he can't take back to store because it has a warranty of 30 days of the store. Help.
Try it on another machine to ensure that it is not the lack of equipment.
And make sure you have the latest drivers/software installed for him.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
My 500 keyboard Microsoft Wireless Comfort has "extra" keys at the top. How does it work? I have to do something
Hello
The keys that you have mentioned are known as multimedia keys that will help you to achieve functions like playing the song, stop playback of a song, open the web browser etc. to one touch access.
You can refer to the manual for the keyboard for additional References.
Thank you, and in what concerns:
Naman R - Microsoft technical support engineer.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Even with the new keyboard, the keypad 10 does not work
Just installed another keyboard Microsoft curve 2000 and 10 pad still does not work. I have the number lock and have removed and reinstalled the drivers and still nothing. It's my second keyboard...
Hello
Try this: change on Windows 7 accessibility options
Control Panel > Ease Of Access Center > facilitate the use of the keyboard > uncheck "turn on mouse keys.
-OR-
See this thread
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/number-keypad-not-working-in-Windows-7/d73f5e52-ee79-480D-A111-957be58ad7d3 -
Mouse and keyboard Microsoft Wireless Comfort 5050
Mouse and keyboard Microsoft Wireless Comfort 5050 will work with my MAC
With due respect, look at the configuration required for the keyboard and the mouse and see if your iMac has the bare. You can find this information by clicking on https://www.microsoft.com/accessories/en-us/products/keyboards/wireless-comfort-Bureau-5050/pp4-00001 #specsColumns - testCarousel
My guess is Yes, but you were not specific about which iMac you have so I can't say for sure.
-
recenly put a password on my router wpa settings now my wireless printer does not work
Hi I recenly put a password on my router wpa settings now my wireless printer does not...
Hello
1. what operating system is installed on the computer?
2. don't you get error message when the wireless printer is malfunctioning?
3. who is the manufacturer of the router and the printer?
Check the links below as a reference.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Hope this information helps.
-
My advent AW10 WIRELESS printer does not print
MY ADVENT AW10 wireless printer does not print, I reloaders disk but it makes no difference. Help!
Hi brianshaer,
1. the printer works when it is wired?
2. what operating system do you use?
3. do you get an error message?Method 1
I suggest you try the steps from the following link and see if that helps.Printer in Windows problems
http://Windows.Microsoft.com/en-in/Windows/help/printer-problems-in-WindowsWhy can I not print?
http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-printSolve printer problems
http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problemsMethod 2
If the steps above fail, I suggest you try to print to the clean boot.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note:
follow step 7 of section of boot KB929135 to the computer in normal mode. -
I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a. I GOOGLED it but the only reference I find tells me to go to the download page on the Microsoft Web site for this product. I went to this site and the only thing it is limited warranty info and Product Guide. I downloaded the Product Guide, but it only covers the basic information like it do not immerse in water, do not take part and the various regulations of the FCC about the product. There is no info in this guide on how to configure or use the keyboard AT ALL. Guidance on how to use this product is probably somewhere?
The dongle is not plug it into the keyboard, it plugs into the USB port on the computer. Wireless keyboards is not related to them - think of that. :-)
If you are missing parts to the keyboard, I would just buy a new one. You can buy wired keyboards for as little as $4 these days, wireless are a little more expensive of course. Personally, I find the wireless keyboards to be a pain because the batteries always come out in one in-opportune times. YMMV
Good luck.
-
My niece has a laptop of HP under vista32 who cannot access the network wirelessly or wired. She is in College and needs the laptop on the network as soon as possible for his class work. I tried to reload the driver wireless driver (Atheros AR5007 b/g) and reset the tcp/ip stack using the command netsh addressed in the microsoft article, but nothing works.
I brought the laptop to work where we have an unsecured wireless lan (called comments) for visitors and the laptop can go out and find all points of access wireless including comments. When I select the comments and try to connect it times out and tells me to watch driver and tcp/ip connections.
Another clue may be that the wireless card does not appear when I type ' ipconfig/all', or the adapter wireless and wired adapters are not displayed:
C:\Users\Admin>ipconfig/all
Windows IP configuration
Name of the host...: Hannah-PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Bluetooth network connection Ethernet card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Device Bluetooth (personal area network)
Physical address.... : 00-21-86-39-EE-22
DHCP active...: Yes
Autoconfiguration enabled...: YesC:\Users\Admin >
I'd appreciate any help I can get.
Thank you!
In the case where somone has this same question, I wanted to post my final resolution of the problem. I backed up its data and restored the laptop to factory default using HP restore and now everything works fine. Better I would say loading Zone Alarm on Vista was a bad thing for my niece to do. Would have been nice to find a magical solution to avoid restoring but never found one. Even after the alarm zone using their instructions by removing completely, there was apparently a problem with the registry who wouldn't let networks are working properly. One thing I noticed after that the restoration was the HP Wireless Assistant poped up and told me about available networks, etc. Assistant wireless didn't pop-up at all whne the cell was dismantled so maybe assistant was broken? Well, I'm out...
-
(Wireless) service does not, access denied - Windows 7
I am running Windows 7 family and have just started to loss of internet connection. I had recently bought and ran the software PC Matic, perform a scan and an option "auto-fix". He seemed to have lost the WiFi connection as well, but I'm not sure. The only thing I know is that my Wireless Service does not and shows "stopped" in the Task Manager, and the service is "automatic".
When I try to 'start' Wireless Service, a dialog box appears informing me that "access denied." How can I fix it?
Help, please...
Hey, Kent.
Thanks for posting your concern. Let's see if there are programs or applications that blocks the internet connection by performing a clean boot. Please see the instructions under "Windows 7 and Windows Vista" in this link: How to perform a boot in Windows.
We can also check if there are some files corrupt or broken update installed that is blocking the connection by running the file system (CFS) auditor. Please follow the steps below:
1. press on the Windows key on your keyboard.
2 type cmd, then right click on the result, then choose Run as Administrator.
3. enter sfc/scannow.
4. hit enter.Keep us in the loop for updates.
Kind regards
Monica camIf you find this article useful, please mark as answer.
-
WIFI ON MY SONY VAIO E SERIES SAYS WINDOWS WIRELESS SERVICE DOES NOT
My Sony VAIO E Series windows wireless service does not
the computer says that
Hi Isabel,.
- Exactly when you receive this message? It's trying to access wireless internet?
- What is the exact model of your PC laptop Sony Vaio E series?
Make sure that the laptop wireless switch is turned on.
Method 1:
Please follow the steps to start the WLAN service.
- Press the Windows key and R together to open run prompt and type services.msc
- Select the autoconfiguration WLAN service in the list, right-click on properties
- Change the startup type to automatic
- Click the Start button
- Click on apply, Ok.
- Restart the computer and check if it works.
If the problem persists, proceed from the link below to fix this problem.
Wireless and wired network problems.
Reply to the post with an up-to-date report of the issue so that we can help you further.
-
Interruption due to the light wireless wireless connection does not illuminate
I have a 4330 s HP's Probook
I can't connect wireless in reason, wireless led light does not activate, I don't know if I need a driver, but I guess that all drivers are real.
hope someone can support me in this case.
Thanks in advance for your support
Original title: wireless connection
Hello Ruka,
Thanks for choosing the Microsoft forums.
I understand that you can not connect to the internet using the Wi - Fi connection on the computer.
I would like to know some information about the problem so that we can help you further.
You did it all change hardware or software before this problem?
Try the following and see if they work for you.
Make sure the wireless, as the function key switch for the wireless is turned on. Please refer to the user manual that came with the computer.
Method 1.
Try to use the network for Windows 7 troubleshooting:
http://Windows.Microsoft.com/en-AU/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2.
Please try to look in the Device Manager for any exclamation point in Device Manager.
Check the network card
1. click the Start button picture of the Start button, type "device manager" in the search box and then in the list of results, click on Device Manager. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2 expand adapter option and then check for any point of exclamation.
Is there an exclamation point on found network adapter, then we troubleshoot the missing or corrupt wireless drivers. And we must also update the latest driver wireless from the manufacturer's Web site.
To install the latest drivers for network adapter from the computer manufacturer Web site:
Method 3
Wireless and wired network problems
Method 4.
Why can't I find a wireless network?
http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7
Additional information:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-in/Windows/cant-connect-Internet#1TC=Windows-7
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows/wireless-networking-FAQ#1TC=Windows-7
Wireless light does not illuminate
Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.
Thank you.
Maybe you are looking for
-
I had to switch to Internet Explorer, because all of a sudden I can't sign to one of my banks of Firefox without substitution of this warning:"This connection is Untrusted.You asked Firefox to connect safely to www.capitalone.com, but we cannot confi
-
When the police of printing is huge, how adjust size? Thank you.
I printed a booking confirmation yesterday pmprint to PDF this morning the two us in very large print
-
HP laptop: HP G42 415DX hangs at post
The system has been and is still blocking position up-down left, said - ESC for the start menu. Battery is dead - AC - did it with and without the battery in the device. I put in the new drive hard windows 7 ENT / x 64. Runs great when it comes to w
-
The updates below will not install. When I restart my computer it doesn't stop. If I do a hard off that I have to get a point of restoration to go up the computer and run again. What should I do to get the updates installed? Update security for Wi
-
Hi all.. I found my PC always hang... I always need to restart the PC, and able to operate back then... blocking problem is interminted... I couldn't estimate when going to breed to hang... then I found that there my event log, have many error messag