Keyboard strokes

Similar Questions

• my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  Hi Kdooley,

  Are a. When you facing this problem?

  B. using a laptop or a desktop computer?

  C. is - what happens with specific applications?

  D. don't you plug a different keyboard to check?

  Method 1

  I suggest you to connect this keyboard on another computer and see if it even. If the problem persists, try Method 2

  Method 2

  Try to change the rate of repeat on the keyboard and check if it helps.

  1. Open keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.
  2. Under character repeat, move the repeat rate slider to the left to keyboard characters repeat more slowly, or to the right to make them repeat faster.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

  If the problem persists, then it might be a problem with the keyboard itself.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Failure of keyboard Strokes

  What would cause the keyboard suddenly stop working in the Middle an email typed in Outlook for one two accounts of users registered on the computer. The keyboard simply does not acknowledge the strikes on Outlook or MS WORD or elsewhere, that you must type something for the user. It is a DELL Latitude D620 with Vista business and Microsoft Office Outlook 2007.  Curiously, the function of the keyboard of the other user seems to be ok.

  1. in the Panel-> Accessibility-> make your computer easier to use-> make the keyboard easier to use, check your filter keys, if it is on, turn it off. You have pressed the right shift key for 8 seconds.

  2. If it is a laptop, turn off the power, remove the battery for a few seconds and replace it.

  3.< oddly,="" the="" other="" user's="" keyboard="" function="" seems="" to="" be="">
  Could be a corrupt user profile.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Keyboard not working no - XP

  The keyboard is a standard PS2 MS and works on my other PC.
  I think that might come after you uninstall Adaptec VideOh! DVD software as it is the only thing that happened close to the event.
  All readers of keyboard have the! on them so I think that it is not the drivers and all that they connect to.
  The other drivers are;
  . Keyboard 109 MCIR Microsoft eHome
  . Keyboard MCIR Microsoft eHome
  . Microsoft eHome Remote control keyboard keys

  Something has damaged my keyboard drivers.  When I delete the and reinstall the question of the Lady. (the!) on the drivers in Device Manager and in properties it says "Windows cannot load device... driver the driver may be corrupted (code 39).

  I uninstalled and reinstalled - same problem

  Thank you MD.

  The issue ended up being Spyware Doctor.  It installs an additional driver for the keyboard to intercept keyboard programs that are installed to capture your keyboard strokes.

  After uninstallation and reinstallation of Spyware Doctor, all is well again. Thanks Allan

• Unknown hardware error code C0000b6d

  I've been browsing the other hardware error codes and have not seen this exact one. My system is a Dell Dimension 8400. This happened directly after a notice flashed on the screen that Avast found a threat, but there wasn't anything I had to do.  Then poof the blue screen of death with the 'unknown hardware error code c0000b6d.

  After that hand, stopping and restarting I get only the Dell screen flash then a high cursor flashing screen left. Cannot get in Mode safe on reboot... just cursed cursor.
  Keyboard strokes are nothing. Help! Katydidtoo

  Hi Katydidtoo,

  1. do you have the Windows XP installation CD?

  Method 1

  It is possible that the hard disk has errors that need to be repaired by using the Windows XP CD.

  If you have the Windows XP CD then I suggest that you run chkdsk on the computer to analyze and repair corrupt errors on the hard drive.

  CHKDSK is available in the Windows Recovery Console and can be a very valuable tool in the treatment of a system that will not start correctly. The use of the Recovery Console is discussed elsewhere, but note that many systems have been rescued by the command chkdsk C: /R Recovery Console there are only two: / p: performs a comprehensive check of the drive and corrects any errors. Does not check if bad sectors / a: locates bad sectors and recovers readable information

  See the Microsoft article below to find out how to start into the recovery console and try the steps above.

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  Method 2

  If the previous step fails, then check out the Microsoft article and try the steps mentioned below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Startup menu appears intermittently and then turn off again several times. Cannot work all menu visible. What can I do to prevent it from happening?

  I'm not a computer Wizard so I hope to give you the correct details.

  The botton 'Start' on the left side is very used to activate the menu.  However, I am not pressing the windows key on my keyboard or by clicking the button on the screen with my mouse.  The problem is intermittent, but extremely frustrating, because when the menu pops up that I can not go on with my work.  By clicking the button on the left on the desk with my mouse can temporarily solve the problem, BUT the menu appears again a few seconds later.

  Sometimes when using any program or watching a dvd. Sometimes it stops for a while, but just at the point where I think that it has sorted itself, he returned.

  I ran Windows Defender and a registry cleaner - I'm about to try AVG anti virus.  If this does not work, I'll go out of my mind.

  I hope there is a simple solution to this... Help, please!

  I spoke with Neelabh Sinha Microsoft based in New Delhi.  Several minutes of trashing the problem, we discussed the possibility of RF interference with my Microsoft wireless keyboard or mouse as a signal low resistance warning came a few times.  I discovered that, even if I did not use the keyboard wireless at the time, he was placed in storage always batteries.  Unknown to me, a book had fallen against the keyboard.  Despite my my laptop in a downstairs room far away from the location of the keyboard, the receiver picked up stray signals from it.  I was using a mouse without a wire with the receiver close to your computer and laptop was tested almost all the signal received from the keyboard.  However, some of the signal got through and are in conflict with the orders that I was typing on the laptop.  Standard keyboard strokes became orders of service and it is these conflicts which were manifested on the screen.

  Thus, in the future, when you use don't not my wireless keyboard, I'll make sure that the batteries are taken to avoid a recurrence of my problem!

  I appreciate the time taken by the Member of the community who responded to my question.  I'm embarrassed that the cause was so stupid and banal, and yet he had such a profound effect.

  Just to say that the keyboard and mouse Set wireless Microsoft performed more than adequately. Perhaps too well...!  Top marks to Microsoft to make such a competent piece of kit that works even when separated by walls, a spread of two-story between transmitter and receiver.

  All points must go to miss who thought that "outside the box" to identify the likely cause of my problem.  Respect!

• Want to start MESSAGE 23 failure - d010ea

  Greetings,

  I'm trying to untangle a machine for a friend.

  It's a pc touchscreen feel like 23-d010ea.

  The initial symptoms were - made power cord in and immediately the main fan has started running, this continued until the power cable has been removed.

  So, I removed the RAM, hard disk and DVD, powered up and down and reconnected everything - no difference.

  Then I removed and reinstall the CMOS battery - this changed the symptoms to the machine sat quietly, as would be expected, when the power cord is connected. The white light by the power connector is on. By pressing the power button on the top of the machine starts the fan, which breeds. It continues for a few seconds, then the powers of the machine down.

  The two white LED side (HD?) don't light up at all. One of them blinks briefly just before the machine goes off as the main HD is accessible (or told to close maybe, not sure).

  All the tests of disconnection and reconnection repeat after behaviour change - no difference.

  Is it a motherboard failure?

  There is no activity of the screen - it remains off all the time. There is no beeps to be heard (I?) assumed that the machine uses the speakers under the screen - I haven't seen or had to attempt a repair on a such system before. I'm used to the areas and the separate screens (though I have some experience with the maintenance of the laptop and component swaps).

  Linux user since 2002

  Try to recover the BIOS as described in troubleshooting procedures. There are two methods.  As I said... It may be too late.

  "but the machine seems not record not not keyboard strokes. It is indicative of a problem of failure or BIOS corruption.

• Windows 7 Task Scheduler is not wake the portable computer at the scheduled time

  Instead of stopping my laptop, I put it to sleep at night. Later, the laptop is expected to execute the sequence of tasks scheduled in my windows-7:

  1. 04:00, run a task "A". To perform this task, the laptop awakens from his sleep because "task" was to "wake the computer to run this task" activated.
  2. 05:06, Hibernate (not to be confused with sleep) the laptop by running the command "rundll32.exe powrprof.dll, SetSuspendState 0,0,0.
  3. 05:30, running a "task B". To perform this task, the laptop is supposed to wake up from hibernation, because this "task B" has also the "wake the computer to run this task" activated.

  The problem:

  Faithfully, the laptop awakens from his sleep at 04:00 to run "task A". However, it is not always faithful to wake up from hibernation at 05:30. 3 days (April 13), he stood at 05:46 instead of 05:30. Today, he was not awake to the top even by 06:05!

  Then, there are following around this interesting phenomenon :

  1. Today at 06:05, when I found that the cell had not awakened, I checked if the food was THERE... it wasn't. As soon as I turned on the power, he automatically stood. When he awoke, he showed that the battery is charged to 64%! Which implies, my manual operation of switches WE supply should not have been necessary in the first place!

     Earlier, on 13 April, however, no manual intervention of any kind has happened and the computer had its power supply IT throughout the night. Yet he stood AFTER the scheduled time.

  2. Then, this Act of waking from hibernation after the scheduled time is fascinating to me. From my point of view, the computer must either wake up on time, or it does not wake up at all because I chose NEITHER option "Run task as soon as possible after a regular check is not respected" , OR the ' if the task fails, restart every ' option.

  Here, I would like to bring a few details & confirmations:

  1. There is no defect in the backup provided by the battery of my laptop because it provides a safe backup for about 2 to 3 hours. Even if I'm typing this message, actually on battery, not on a current area of my laptop power supply.
  2. I usually leave the computer power mobile power during the night as a precaution against the batteries running out of power. Even on 13 April, it was YOU. Last night was the first exception to this regime, which began 21 days ago.
  3. I don't have either the "start the task only if the computer is powered" or the "Stop if the computer switches to battery power" options enabled for a task planned in question.
  4. I also have the advanced power settings "allow wake timers" is set to enable for "on battery" and "Plugged In".

  So, I have the following questions:

  1. Why computer faithfully to wake up from its sleep, but not as faithfully to wake up from hibernation?
  2. The State of food plays a role any in this Act of waking from hibernation? Does it matter if the computer is on battery or plugged when waking up when "start it the task if the computer is powered" or the option "stop if the computer switches to battery power" enabled?
  3. Finally, what can I do to correct this erratic behavior?

  Right - a scheduled task cannot be configured to wake the system from hibernation.

  In the properties of the task, the Condition is "wake the computer to run this task":

  

  The key words here are "Wake" and "Sleep".

  When your system is in sleep, he is still able to get a stimulus like a click of the mouse or keyboard stroke to wake up or a scheduled task to wake him up.

  The only way you can be awakened, it's if you sleep - you cannot be reactivated if you are hibernating (aka powered off completely = death).

  You cannot use a ST to wake the computer after Hibernation.

  You might be able to set an option in the BIOS to power the system at some point and have then an era channel a few minutes after this date.

  You may be able to configure your router to send a WOL packet (wake on LAN) to the system to a point and then have an era handle a few minutes after that date.

  Useless answers?

  Some often banned users has some good tips:

  Ignore responses that begin with the words "Hi" or "Hello" contain methods and steps, ignore phrases that start with the word 'try' and responses that end with the words "check if it helps" you can save yourself a lot of time and frustration.

• How to make my confidence one ways c# windows application that should not blocked by antivirus Applications and how to get the third-party certificate for that?

  Hello

  I built a windows c# application that accesses OS, printer information using WMI query, monitor keyboard strokes overall Win32 API and calls others our executables too.

  Whenever I try to deploy it to computers to our customers, it is getting blocked by antivirus applications.

  If I want to make my request as being approved, we mean that it shouldn't be blocked by antivirus applications.

  How to get the certificate of trustee for my application? Even I am ready to make my request as registered product.

  Kindly let me know the procedures, solutions.

  Thank you

  Senthilkumar AK

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Site to Site VPN ASA 5510

  OK my forehead is painful to all keyboard strokes that I know that it must be something simple, but I am brand new to the SAA.  I had a site to site VPN configuration via routers 1751 that worked very well, but we're looking to add some more remote field offices, and I felt that it would be easier to maintain several sites is on the ASA 5510.  I have the VPN configured on the SAA and he said that the tunnel is up.  I can telnet to the ASA and ping the remote gateway on the even side of VPN and it pings fine.  If I try to ping on a local computer, I get a "Request timed out".  If I makes no changes apart from go to the computer room and replace the network cable the 1751 and then through the 1751 I can now ping the remote door way to my computer.  The remote router works obviously very well, my statement of route on my router for vpn push through the ASA (same ip address) IP traffic that has been used by the 1751 works obviously. It seems so just like ASA is not being pushed in the ethernet0/0 VPN traffic or at least it is not encrypted.  I also noticed that the ACL for NAT seems to increase in number of access either it seems, there is really just one small thing missing to make the ASA except and encrypt incoming traffic on ethernet0/0:

  My network is not configured with a DMZ is something like that, the ASA ethernet0/0 and my local network on the same subnet:

  Router (Cisco 2811)

  |

  Layer switch 2 (ProCurve)

  |                                      |

  ASA5510 LAN computers

  I'm trying to except both sides of the VPN in and out on Ethernet0/0 traffic I saw there was a framework for this "permit communication between VPN peers connected to the same interface' and I've activated this option.

  In short, I need to understand why the VPN tunnel shows that upward and I can ping the remote of the SAA, but peripheral gateway on my network can not ping to the remote gateway through the int Ethernet0/0 on the SAA.

  From the console of the ASA, I get this:

  ASA5510 # ping 192.52.128.1
  Send 5, echoes ICMP 100 bytes to 192.52.128.1, wait time is 2 seconds:
  !!!!!
  Success rate is 100 per cent (5/5), round-trip min/avg/max = 100/108/120 ms

  ASA5510 # show crypto ipsec his
  Interface: *.
  Tag crypto map: * _map, local addr: 10.52.120.23

  local ident (addr, mask, prot, port): (10.52.120.0/255.255.255.0/0/0)
  Remote ident (addr, mask, prot, port): (192.52.128.0/255.255.255.0/0/0)
  current_peer: x.x.x.204

  program #pkts: 9, #pkts encrypt: 9, #pkts digest: 9
  decaps #pkts: 9, #pkts decrypt: 9, #pkts check: 9
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 9, #pkts comp failed: 0, #pkts Dang failed: 0
  #send errors: 0, #recv errors: 0

  local crypto endpt. : 10.52.120.23, remote Start crypto. : x.x.x.204

  Path mtu 1500, fresh ipsec generals 60, media, mtu 1500
  current outbound SPI: C49EF75F

  SAS of the esp on arrival:
  SPI: 0x21FDBB9D (570276765)
  transform: esp-3des esp-md5-hmac
  running parameters = {L2L, Tunnel}
  slot: 0, id_conn: 1, crypto-map: * _map
  calendar of his: service life remaining (KB/s) key: (3824999/3529)
  Size IV: 8 bytes
  support for replay detection: Y
  outgoing esp sas:
  SPI: 0xC49EF75F (3298752351)
  transform: esp-3des esp-md5-hmac
  running parameters = {L2L, Tunnel}
  slot: 0, id_conn: 1, crypto-map: * _map
  calendar of his: service life remaining (KB/s) key: (3824999/3527)
  Size IV: 8 bytes
  support for replay detection: Y

  From my office on the 10.52.120.0 even the etherenet0/0 interface on the ASA network I get this:

  C:\Users\***>ping 192.52.128.1

  Ping 192.52.128.1 with 32 bytes of data:
  Request timed out.
  Request timed out.
  Request timed out.
  Request timed out.

  Ping statistics for 192.52.128.1:
  Packets: Sent = 4, received = 0, lost = 4 (100% loss)

  C:\Users\***>ping 10.52.120.23

  Ping 10.52.120.23 with 32 bytes of data:
  Reply from 10.52.120.23: bytes = 32 time = 5ms TTL = 255
  Reply from 10.52.120.23: bytes = 32 time = 3ms TTL = 255
  Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255
  Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255

  Ping statistics for 10.52.120.23:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 1ms, Maximum = 5ms, average = 2ms

  Count on VPN Tunnel ACL does not increase when I try to ping the address of the remote gateway.

  Here is the running of the ASA configuration:

  ASA Version 7.0 (2)
  names of
  !
  interface Ethernet0/0
  nameif InsideNetwork
  security-level 100
  IP 10.52.120.23 255.255.255.0
  !
  interface Ethernet0/1
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  nameif management
  security-level 100
  IP 192.168.1.1 255.255.255.0
  management only
  !
  activate the encrypted password of XXXXXXXXXXXXXXXX
  passwd encrypted XXXXXXXXXXXXXXXXXXX
  ciscoasa hostname
  domain default.domain.invalid
  passive FTP mode
  permit same-security-traffic intra-interface
  Access extensive list ip 10.52.120.0 InsideNetwork_nat0_outbound allow 255.255.25
  5.0 192.52.128.0 255.255.255.0
  Access extensive list ip 10.52.120.0 InsideNetwork_cryptomap_20 allow 255.255.255
  .0 192.52.128.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  management of MTU 1500
  MTU 1500 InsideNetwork
  management of the interface of the monitor
  the interface of the monitor InsideNetwork
  ASDM image disk0: / asdm - 502.bin
  don't allow no asdm history
  ARP timeout 14400
  NAT (InsideNetwork) 0-list of access InsideNetwork_nat0_outbound
  Route InsideNetwork 0.0.0.0 0.0.0.0 10.52.120.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
  Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 10.52.120.0 255.255.255.0 InsideNetwork
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  card crypto InsideNetwork_map 20 corresponds to the address InsideNetwork_cryptomap_20
  card crypto InsideNetwork_map 20 set peer x.x.x.204
  InsideNetwork_map 20 transform-set ESP-3DES-MD5 crypto card game
  InsideNetwork_map InsideNetwork crypto map interface
  ISAKMP enable InsideNetwork
  part of pre authentication ISAKMP policy 10
  ISAKMP policy 10 3des encryption
  ISAKMP policy 10 md5 hash
  10 2 ISAKMP policy group
  ISAKMP life duration strategy 10 86400
  Telnet 10.52.120.0 255.255.255.0 InsideNetwork
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  management of 192.168.1.2 - dhcpd address 192.168.1.254
  dhcpd lease 3600
  dhcpd ping_timeout 50
  enable dhcpd management
  tunnel-group x.x.x.204 type ipsec-l2l
  x.x.x.204 group of tunnel ipsec-attributes
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  Policy-map global_policy
  class inspection_default
  inspect the dns-length maximum 512
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  Cryptochecksum:7e478b60b3e406091de466675c52eaaa
  : end

  I haven't added anything to the config except what seemed necessary to get the job of VPN tunnel.  It should be fairly clean.

  Thanks in advance for any help... I really hope that it is something really simple as a recruit ASA just forgot

  Strange, but good news. Thanks for the update. I'm glad everything is working.

  THX

  MS

• From the drop down menu to mask scrolls by itself

  All of a sudden the mask drop-down menu scrolls by itself. I use the hotkey to select what I want. Not sure why this is happening. The way upward into the upper part of my toolbar did this with the mode in the layers panel. Help, please!

  OK they may not scroll on their own, but they should scroll if you use your arrow keys on the keyboard. A key would be stuck or something production arrow keyboard strokes.

• Clicks of the mouse do not work in all the dialog boxes.

  However, they meet keyboard strokes. I can't find anyone with a similar problem here or anywhere. Would be very grateful for advice.

  Thank you. The problem was solved by a software update.

• Photoshop slow/unresponsive - Yosemite / PS CC2014. Help?

  @Yosemite / PS CC 2014 on Mac pro with Wacom. I find Photoshop do not respond quite quickly and sometimes don't notice of keyboard strokes. I had all the problems related to the plugin window white actually cure. I tried this but it didn't work. Apple support I tried also and Adobe chat. Still pending. All the latest updates software and drivers. Thx for the advice

  Make sure that the leaders are off. If this does not help, take a look at this page from Adobe: http://helpx.adobe.com/photoshop/kb/photoshop-menus-turn-white-mac.html

  Benjamin

• SQL-Developer: shortcuts and flaws in internationalization

  I am a frequent user of SQLdeveloper, Jdeveloper and another IDE that I use every day for programming. Comment/Uncommenting blocks of save is a very frequent usaged feature in an IDE.
  I use SQLdeveloper in Switzerland with swiss keyboard.
  The function "Comment/Uncommenting" shows do forge shortcut STRG-Schragstrich work. It should be CTRL-slash == CTRL-/ (or CTRL-backslash == CTRL-\? in German Schragstrich is not so explicit which is intended).
  
  Problem
  None of these shortcuts still work.
  I tried to any combination of keyboard strokes in the last few years, but I have not find. Occasionally a then this question is coming, and it bothers me a little.
  
  This question is about these functions:
  See: Bearbeiten > how > Zeilenkommentare ein-/ Ausschalten STRG-Schragstrich
  See United States (guessed): edit > Source > turn on/off save
  
  
  These shortcuts are customizable?
  What are the keystrokes on the US keyboard '?
  Is it possible to do it on my keyboard Switzerland?
  
  Thank you
  
  Othmar

  Shortcuts are customizable from

  Tools-> preferences-> shortcut keys

  Here, you can also see the shortcuts currently configured.

  Also if you want to use SQLDeveloper in English, regardless of the settings of your computer, you can add the following line:

  AddVMOption - Duser.language = IN

  to your sqldeveloper.conf file usually located in [SQLDEVELOPER INSTALL DIR] / sqldeveloper/bin.

• Wireless keyboard not working not properly

  New wireless on El Capitan iMac keyboard. Shift strokes do not correspond to the characters on the keys.

  Bluetooth can not find keyboard, but it it connected. Using the Spanish and British keyboard. Same problem on both.

  for example type Shift? and get_. Seems to be a problem with the game to the top of the keyboard.

  Follow this link If your Apple wireless mouse, keyboard or trackpad is not working as expected - Apple Support