Want to start MESSAGE 23 failure - d010ea
Greetings,
I'm trying to untangle a machine for a friend.
It's a pc touchscreen feel like 23-d010ea.
The initial symptoms were - made power cord in and immediately the main fan has started running, this continued until the power cable has been removed.
So, I removed the RAM, hard disk and DVD, powered up and down and reconnected everything - no difference.
Then I removed and reinstall the CMOS battery - this changed the symptoms to the machine sat quietly, as would be expected, when the power cord is connected. The white light by the power connector is on. By pressing the power button on the top of the machine starts the fan, which breeds. It continues for a few seconds, then the powers of the machine down.
The two white LED side (HD?) don't light up at all. One of them blinks briefly just before the machine goes off as the main HD is accessible (or told to close maybe, not sure).
All the tests of disconnection and reconnection repeat after behaviour change - no difference.
Is it a motherboard failure?
There is no activity of the screen - it remains off all the time. There is no beeps to be heard (I?) assumed that the machine uses the speakers under the screen - I haven't seen or had to attempt a repair on a such system before. I'm used to the areas and the separate screens (though I have some experience with the maintenance of the laptop and component swaps).
Try to recover the BIOS as described in troubleshooting procedures. There are two methods. As I said... It may be too late.
"but the machine seems not record not not keyboard strokes. It is indicative of a problem of failure or BIOS corruption.
Tags: HP Desktops
Similar Questions
-
message "SIM failure" of "no SIM". 1st time it happened I turned the phone off and turned it back on and it was OK. It happened again, and this time cut off and back on does not the phone is working correctly. Cannot make or receive calls. Nothing has ever changed with my carrier.
First get a replacement SIM from your operator. If this does not fix it you have a hardware problem.
-
I was forced to upgrade to the new 3.6.12 version. In the old version I had, if the program crashes or if I stopped deliberately Firefox in process with end task, stopping when I restarted Firefox a box would come asking me if I want to start a new session or go back to the old session. Well the default seems today with the new version, it will be back to where you were when it crashed or was interrupted through process and does not give you a choice. I searched tools several times and can not find something that will give me the option described above.
The thing is, I'm going to stop Firefox using end task in the process when I come across a site/page that opens a box asking me if I really want to leave the page, instead click on the pop-up box or a site that begins to appear windows in all directions.
Can someone direct me to where I can tell my browser to ask me if I want to start a new session when this happens? And please tell me why... whenever software is upgraded or new and improved, it always ends up take the choice?
Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about: config to get page the on: sessionrestore page immediately with the first reboot after a failure has occurred or the Task Manager was used for the closing of Firefox.
Which allows to deselect the tabs that you do not want to reopen, but will reopen the other tabs.
See:
-
I own a HP Pavilion P6000, model #p7610t. I'm using Windows 7 OS. When I want to start Disk Defragmenter, I get a window with the following message: Disk Defragmenter is currently using customized settings created by another program. There is a button with a blue and Gold Shield that says: 'delete settings '. How can I identify this other program? Should I forget about it and remove the settings?
Bob, I, personally, would eliminate the settings to see if that helps. When you do this it can give you a clue to the other program involved. The worst that can happen is that you need to reinstall the other program.
If your problem is solved, please click "accept as a Solution.
-
Whenever I start my computer, I get the following error;
"Parser Message: RCINT failure." STRINGTABLE ID not found. "42" to line 462. "
It does not even stop my machine gently. I have to putoff my power of the machine.
If anyone has a solution please let me know. Your friendly co-operation would be really appreciated.
Kind regards
Abdul Wahab.Something that you have running in the background is a failure. Autour Googling shows a person who installed XP Style and that was causing the problem. Other links show people with the problem but no solution. So if you have not installed the XP Style, you will need to do some systematic troubleshooting.
The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?
The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?
Make sure that the computer is clean:
http://www.elephantboycomputers.com/page2.html#Removing_MalwareIf the computer is completely virus/malware-free, manage your startup to find the culprit.
Start > run > msconfig [Enter]
This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".
How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
MS - MVP - Elephant Boy computers - don't panic! -
Parser Message: RCINT failure. STRINGTABLE ID not found. "42" on line 23
After that my pc has a virus, I implemented the Eset NOD32 Antivirus. I could scan all, but finally when I connect to my pc; He shows me the error message "Parser Message: RCINT failure." STRINGTABLE ID not found. "42" on line 23". I don't know how to solve. Pls help me... THX in advance u.
Hi TitanSRT,
- Exactly when you receive the error message?
- You are able to boot into Windows after the error message?
I suggest that you scan the computer for malware infections or viruses remaining and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
You can also use Microsoft Security databases to scan your computer
http://www.Microsoft.com/security/PC-security/MSE.aspx
If the computer does not start in Windows, and then start the computer in safe mode with network mode and perform the analysis.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Computer viruses: description, prevention, and recovery
-
How do you want to start typing on sticky notes
How do you want to start typing on sticky notes
Here is the procedure: http://www.vistax64.com/tutorials/93264-sticky-notes.html.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Using Mac OSX 10.10.4 - tried to install Acrobat Pro DC Free downloaded trial 55% then error message "Unexpected failure" came
Hello
It would be possible that the link you made reference to download Acrobat DC could be broken.
You can close this download from the activity monitor, and then try to download referring new the following link.
Download Acrobat DC (DC) | Company or VIP
Please be sure to turn off all third-party software before starting the installation.
Let us know how it goes.
Concerning
Sukrit diallo
-
Update will not finish, want to start in safe mode, please help. It's updated Aug.5 2016.
Start in Safe Mode. What do you expect to make? You must do this:
Reinstall El Capitan without erasing the drive
Please make sure that you back up.
- Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
- Select disk utility, then click on the continue button.
- Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
- Click first aid icon in the toolbar. Wait until the button is active, then click it.
- Quit disk utility and re-enter the Utility Menu.
- Select Reinstall OS X and click on the continue button.
Also, see this tip for user: basic steps for the OS X upgrade.
-
Satellite L40 - nothing happens if I want to start it
I have a Toshiba Satelite L40 - 12z. If I want to start the laptop, nothing happens just the hd activity led flashes very quickly.
What can be the problem?
Hello
You are able to access the BIOS?
You see the Toshiba start screen at the beginning of the boot order?If the Toshiba start screen does not appear then that would mean that the laptop didn't pass the POST (power on self test) and that would mean that a serious hardware problem has been detected.
A serious hardware problem could be a motherboard fault, RAM, etc. -
Satellite A300-243 - can I choose the USB key you want to start?
Hello
I need an update for my laptop.That is the problem. I want to boot from a flash drive and I want to save my data on another USB HDD.
All other laptops (even mini books) is an option that you can choose when you need 2 or more USB key when starting, that USB drive you want to start.When I put 2 key USB to PC and push button start options, see a single USB boot option. I want to see them all.
Please help me get rid of this.
Thank you.PC: A300-243
BIOS: 1.90-3/20/2009Hello
I think that's not possible.
As far as I know there is that only one option is supported by the BIOS (last option called USB memory)
You need to know that the different BIOS supports various functions and BIOS located on the A300 contains the option only to a USB key.So you can use just a USB key to start.
Welcome them
-
Outlook xpress popup wants compack my message I say no and it keeps popping up
Outlook xpress popup wants compack my message I say no and it keeps popping up. I do not know what compacking means and IFIs do it where can I find my messages
NLR
Compaction is a normal function, you must leave. It makes the post take up less space on your hard drive
You should see no visible change in your email
-
Original title: irremediable failure?
Whenever I try to back up the computer I get an error message: Catstrophic failure (0x8000FFFF). I don't know how to solve this problem.
Hello
1 have had any changes made to your computer before this problem?
Please, try the following methods and check if it helps:
Method 1:
Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".
http://support.Microsoft.com/kb/973558/Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Hope this information is useful.
-
This happens all the time. It does not matter what I try to start if no failure or normal startup mode. I tried to use the repair from the vista cd. It's 64-bit computer with AMD phenom processor and an Asus motherboard there is a HDD 500 GB and 4 GB of memory.
you have AVG Antivirus?
If so, these instructions will fix it: http://forums.avg.com/ww-en/avg-free-forum?sec=thread&act=show&id=94159
-
Try to load a "E A Sports PGA Tour 96 for Win 95" on a new OS Win 7 32/64 6 G memory. It wants to start but where and or what is a good method to try to get older programs to work with newer systems? Some I know, some I Can not - Smart Rocker
What system you have 32-bit or 64-bit?
32-bit and 64-bit Windows: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/41531554-d5ef-4f2c-8fb9-149bdc5c8a701033.mspxList of limitations in 64-bit Windows
http://support.Microsoft.com/default.aspx/KB/282423#appliesToHave you tried right clicking on the shortcut to the game program, or the .exe and select "Run As Administrator"? Perform, even if your user name is an administrator.
Make older programs in this version of Windows (Windows 7)
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsHelp with Windows 7 compatibility issues
http://Windows.Microsoft.com/en-us/Windows7/help/compatibilityWindows 7 Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspxWindows Virtual PC
Download Windows XP Mode
http://www.Microsoft.com/Windows/Virtual-PC/Download.aspxWindows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."
Virtual PC 2007
http://www.Microsoft.com/downloads/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en&TMVirtual PC 2007 running on Windows 7
http://blogs.msdn.com/virtual_pc_guy/archive/2009/08/19/running-Virtual-PC-2007-on-Windows-7.aspxThis warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look. Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).
VirtualBox is an impressive VM competitor
http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15
Maybe you are looking for
-
Satellite A110-142 - Volume Control/Sound Drivers are missing
After using my laptop for a period of time yesterday, I realized that the audio had failed, I checked the volume settings and found that the volume control icon missing from the taskbar. After further investigation, it seems that the audio hardware d
-
LaserJet 100 spots last half of page when printing labels
We used to have a big HP Color laser printer and it was fantastic. It recently broke down and all we could get was this all-in-one which was about 1/4 the price of our last printer but it drives me crazy every time I have print labels. The last half
-
Why not ' t the illumination of the keyboard upwards when I type?
the keyboard on my laptop always turn on when you press a button and just stopped, how to enable light sources?
-
Original title: Hotmail I have not received e-mails from last week. I just tried to send a test email and it says that my account is not available?
-
I get error 0 x 80070005 when you try to update my music or video Apps in Windows 8.
When I try to update my music or video Apps on the Store Windows in Windows 8, I get error 0 x 80070005.