Keyboard touchpad connection does not

When I use my keyboard, my touchpad does not work. Ive tried to turn down the sensitivity of the touchpad. This was not effective. Any other suggestions out there? Thank you very much. Mason

Check out this article , it can help you to solve the problem.

Tags: Dell Products

Similar Questions

  • Satellite C70-B-306 - local network connection does not work

    Hello

    I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
    I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

    It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
    What can I do? I have the laptop 1 week.

    René

    Hello

    What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

    Open Device Manager and check if the LAN CSA is listed and enabled correctly.

  • Excite PRO 3G connection does not work after last update Android v4.3

    Hello

    I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

    After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

    My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

    Please help me.
    Thank you

    > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

    Go to mobile network settings and search again for the 3G network.
    I had a similar problem with my Android Smartphone and my o2 provider
    I started to search for new, so I chose the O2 again and then I could solve the problem.

    In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

  • P850 satellite and a WiFi - internet connection does not work well

    Hello

    My internet connection does not work with a Wi - Fi connection.
    I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

    I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

    All solutions?

    > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

    If such a problem would appear again start the console (window BACK in typing CMS in search)
    Here, use the command * ipconfig / renew *.

  • Satellite A200-1js: local network connection does not appear

    Hey people

    I have windows xp sp3 in my Satellite A200-1js but my Ethernet connection does not shut... and I saw this in my network connections:

    And in my etiquette system shows this:

    I installed the correct drivers

    Everyone knows what is happening?

    Thnkx

    Satellite A200-1js belongs to the PSAE6E series.
    Just a few questions:

    You would update you BIOS to the version of Win XP?
    If it isn't-> do this!

    Have you tried reinstalling the driver Realtek LAN 5.664.205.2007 from the Toshiba page?
    If it isn't-> do this!

  • Network connection does not work after reinstalling Windows XP.

    Original title: problems with reinstalling XP.

    I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

    Hi John Fisher_888,.

    You can download & install the drivers for the adapter from this link & check if it helps

    http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

    Hope the helps of information.
    Please post back and we do know.

  • Unable to connect to a dial-up connection does not require a user id and password.

    It's kind of a weird question.  I have a new vista machine, and a user must always connect to a Government to start the connection via modem.  In XP, we used hyperterminal and everything worked well.  As hyperterminal is not available under Vista, we spent some time trying to get the vista switched from work.  He composed, negotiates, but when it comes to 'verification of the user name and password' connection failed after that right.  He has not set password to connect, the password entered only after you connect and you select the option to connect.

    Now, I copied Hyperterminal from a XP machine and was able to connect.  But using hyperterminal, none of the shortcuts that I do can be used.  They all come with "could not read session file: c:\. "c:\session.ht".ht."  I changed the location of the shortcut, the location of the hypertrm.exe, departure to the target location, etc...  The only way to get a recorded session to run is to open hyperterminal, and then click file, open and point to the location of the session.ht file.  It works, I suppose, but its not just a lot more, especially since this is not until the last the default location that you opened a file from.

    Ideally, I would like to use the connection to start menu.  Is it possible to force the connection does not send a user name and password?  He always says "verifying username and password" even though I left the empty boxes.  Or is this another problem with Vista and dial upward?  Any help would be greatly appreciated.

    Thank you.

    I thought about it... a bit, I've found a workaround.

    You can call hyperterminal for the prompt, using:
    Hypertrm c:\myfile.ht

    You open hyperterminal as we are used to having open when you click the .ht file in XP.

    Knowing this, you can create a shortcut to hyperterminal which calls the hypertrm.exe AND the .ht file

    Mine is:
    C:\Windows\System32\hypertrm.exe c:\Windows\System32\ohip.ht

    Bloody Government and their former systems eh?

    I hope this helps!

    Dave

  • my remote desktop connection does not show the three options under DESK remotely

    my remote desktop connection does not show the three options under DESK remotely

    like that: -.

    Allow the connection of computers running any version of remote desktop
    or
    That allow the connection of computers running Office remotely with authentication NLA

    Are you sure your market Win 7 Ultimate or Pro? If your running Win 7 Home Premium, you cannot use Remote Desktop host/server mode and you will not have these options.

    Go in Start > run and type winver at the prompt to find out what version of your race.

    If you are running Win 7 Home Premium or Starter watch TeamViewer as an alternative.

    http://www.TeamViewer.com

  • Why my wifi connection does not work correctly?

    I had problems with my computer for a while. The first problem I had was that after I hibernated my computer it would be even not show me internet connections. I discovered that the hibernation of the computer can sometimes cause this problem. A little later that I realized that even when the computer had not been put into hibernation for weeks sometimes started upward with the same problem. He said networks is not available and there is a red cross on a box where my wifi bars should be. I had to reboot my computer up to 5 times to get the bars will appear. When he did not connect to all pilots and equipment I need to connect does not even appear in the control panel. The other times where it worked the drivers were all there. I don't know yet how this can happen. The other computers in my home connect very well and are able to interact with each other at high speed and get internet just fine.

    Recently, I lost any connection even when I rebooted my computer 10 times it doesn't.

    I came across a thread that told me to access prompt as administrator and type in this

    netish int ip reset

    I was able to connect to my network now, but he says no access to the network or Internet. I also tried typing in this...

    ipconfig/flushdns

    now I can access the internet and communicate with other computers. I tried to play Minecraft while my friend was the host through the router, but the connection was so slow that it was as if I was looking at the past in slow motion. I crossed several times and abandoned. The internet is too slow. It's like I'm on dial upward, but it should be high speed, I don't know what the problem is. What else I can watch on my computer to help me solve this problem? Should I restore it to factory settings? Or is something broken?

    Hi Veronica,.

    Thanks for the reply.

    Sorry to hear about the inconvenience caused.

    According to my understanding, you are having trouble with internet connectivity.

    You upgrade windows or what was the first operating system installed on the computer?

    This problem is mainly due to drivers get damaged.

    To rectify the problem, you will need to uninstall the current network using Device Manager drivers and install the latest drivers from the computer manufacturer site.

    Please refer to this sub article, which will guide you to uninstall the drivers using the Device Manager:

    https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

    To download the latest drivers from the computer manufacturer site, see the link below:

    http://www.ASUS.com/in/supportonly/U56E/HelpDesk_Download/

    Hope this information helps, for assistance please answer.

  • Socket connection does not work with SIM network

    Hi all

    I created a socket connection. It works fine when I use the WiFi and iam able to download the data and get a correct answer successfully.   But when I use the network GPRS/SIM I get "Unauthorized response" as an answer. I already check with the default blackberry, here internet browser works very well.

    Can someone tell me why socket connection does not work when I use the SIM card network.

    If anyone knows about internal or the following BlackBerry setting that also tell me

    "Option-> advanced-> TCP Option.

    Thank you

    Neeraj Chauhan

    Thanks Peter,.

    For your support... Now my application works very well in both cases (SIM and Wi - Fi network). So I close my ticket.

    Thank you & best regards

    Neeraj Chauhan

  • My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.

    My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.  Windows 7 32 bit.

    Hello

    If the amber light is on the TouchPad itself, try double tapping

    If that is not activate, try uninstalling the device driver course Synaptics pointing, then restart the computer and download and install the driver from the link below.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145435&prodNameId=4145436&swEnvOID=4052&swLang=13&mode=2&taskId=135&swItem=ob-86824-1

    Kind regards

    DP - K

  • Satellite U50T-to-10F - keyboard and touchpad MOMENTUM does not

    I have a Toshiba Satellite U50T-A-10F, who did the usual round off the coast and was updated last night won't however when I turned it on the wheel mouse and keyboard does not work I managed to get hold of because the touch screen still works, but nobody knows why it would update then?

    Tried phone support but only open from Monday to Friday, I took out of warranty extended thanks to God!

    According to the bulletin of Toshiba technical support document, the touchpad can be disabled only and using the function keys it should be possible to activate the touch pad once more.
    Touchpad doesn't work anymore after upgrading Windows

  • Keyboard does not. Able to use for the connection does not work after that.

    The keyboard works to connect. But does not work after that.

    Hello Sml15,

    The embedded screen keyboard should still work even if the physical keyboard isn't.

    Try this first...

    Press and hold the Windows key and the space bar.

    If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

    In the window of the ease of access to the keyboard, disable FilterKeys.

    If all goes well, which will fix the problem.

    Let me know how it turns out.

  • The internal keyboard BACKSPACE key does not work

    I have a laptop Toshiba Satellite and the BACKSPACE key does not work.

    He will start work the rare opportunity, but then it just stops working again.
    This happens on everything, including word and internet ect.

    It has been like that for a few weeks now and I turned the laptop and turn off many times.
    Is there a way to fix it myself or I send for repair?

    Please, * don't * tell me:
    Get an external keyboard
    Try it turn on and off
    Just highlight the words and use the delete key - it's annoying to have to do this all the time
    Type carefully and do not make so many mistakes

    Thank you!

    > Please, don't tell me not to:
    > Get an external keyboard

    And why shouldn't t someone recommends you to check the functionality using the external keyboard?

    It s recommended to connect an external keyboard to verify how the BACKSPACE key would work using 2nd external keyboard. In case the back might work properly using USB keyboard, the question is very clear; in such cases its main shortcomings. The key cannot be replaced or changed or fixed. In this case, need to replace the entire keyboard!

    In case the BACKSPACE key does not even using the external keyboard, then this would mean that the internal keyboard controller is faulty and in this case only the replacement motherboard would be useful.

    But to be honest, I think that its simple keyboard failure and a replacement would solve this.

  • Satellite A200 touchpad function does not properly

    Hello

    I spent a lot of time looking for the solution to my problem, but without effects.

    My touchpad does not work correctly. I mean, I can move the arrow and click on the screen, it's ok. But all other functions (volume, mailbox and other "virtual buttons" don't work)-the so-called "hybrid".
    I am connected to the USB port on the mouse.

    If I disconnect it, there is no change - the touchpad works only in basic mode.
    If I change the double mode in the settings of the touchpad to "always in Dual Mode when an external device is connected" - and all the virtual buttons work.
    But what do I do to make the mode of double the work even if the mouse is not connected (so that the power button works)?

    Thanks for any help,
    M.

    I m a bit confused now and I don t know what exactly you want
    You're talking about the touchpad, mouse USB, bi, etc..

    I put t know what you mean with dual mode and maybe you should give us more information about your operating system.
    And that you use the touch pad or mouse USB?

    Can you post a screenshot screen or something else?

    I put t know if this solves your problem, but have you tried to update the driver for the touchpad? You can find it on the Toshiba site.

Maybe you are looking for