KEYCHAIN ISSUE: You have chosen not to trust "COMODO RSA organization Validation Secure Server CA"

Similar Questions

• 'do not load the tabs until you have chosen.

  Is there a solution to 'do not load the tabs until you have chosen? No tab should never load in the background (until this tab is selected). BarTab worked for previous versions, but not in 38 or 45 or 49. What is the solution?

  Meanwhile found heavy BarTab and BarTab Plus (and this last seems to work very well really do not load anything in tabs in the background until this tab is selected, even for the session manager charging many tabs). https://addons.Mozilla.org/en-us/Firefox/addon/BarTab-plus/ Saved your suggestion with gratitude (a nt he finds me, all thx) and will try as soon as necessary.

  Also found a replacement for old Download Statusbar: https://addons.mozilla.org/en-US/firefox/addon/s3download-statusbar/

  However, comparing performance with FF21, new versions are all a lot more nits, especially with many tabs open. Assuming that the web is now standardized and programming has optimized, he does not know why this is, but am not an expert and guess where miss me a lot. If I had something to say, I suggest you go back to FF21, to treat everything that has happened since then as learning experience, avoid Chrome & IE errors and build a better browser, but it's probably naive and a joke in your eyes, although there should be power users that guide the development, developers or average users ;)

• After download, box that says 'you have chosen to open' 'gray out' after selecting the button browse and full page is frozen / crashed. PC reboot needed.

  Hi Firefox
  After I finished downloading a file, see the Mozilla download page.
  I right click on the download to open it and the box "you have chosen to open" appears in the lower right of the screen with the "radio button", already selected for "open with...
  So far, all this is perfectly normal.
  However if I click on the "Browse" button to make a choice then the title at the top of the box, closing "Cross" and the "OK" button all gone gray and are unusable.
  In addition, all the page Firefox is frozen / crashed and cannot be closed.
  I have no other option but to reboot the PC.
  I tried various suggestions I found on your forums, including the removal of cookies, disable hardware acceleration, and I uninstalled and reinstalled Firefox 12.
  I looked at your "troubleshooting information" and it does not show a graphic driver problem. However, my driver is the latest driver nVidia for my GeForce FX5200 card and it worked fine with firefox 12.

  WebGL RendererBlocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  GPU accelerated Windows0. Blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.

  Here are the specs of my computer:

  MSI K8N Neo motherboard (N1996 MS-7030 VER: 1),
  an AMD Athlon (tm) 64 processor 3200 + (Socket 754)
  3 GB of RAM.
  At present, it has a NVIDIA GeForce FX 5200 graphics card.
  The system runs Windows XP Professional 32-bit with SP3 and all the drivers are up to date.

  I have used Firefox for many years and not that another browser would never use!
  I did have a problem until now. I hope you can help me.

  Kind regards
  Chris

  Follow the suggestions mentioned in the following articles:

  • What to do if you are unable to download or save files
  • Firefox crashes or does not - how to fix

  Check and tell if its working.

• "ERROR: the user name you have chosen already exists."

  When someone registers on my registration form (http://puremediccom.worldsecuresystems.com/puremedic-guru-register) with a user name that already exists, the form is sent, but in the notification of workwlow I see behing username "ERROR: the user name you have chosen already exists." When you try to connect to the site it does not indeed.

  Is the best way around this to request an address of email as a username? Or is it possible to run the validation on the existing user name?

  See you soon

  Jerun

  Hi Jerun,

  I think that the workaround in this case, so need email address to match the username is to use some JS.

  Please note the custom scripts is off of BC, but here is an example that may help.

  http://KB.worldsecuresystems.com/598/bc_598.html#main_Set_the_value_of_the_username_field _ equal_to_the_email_address_field

  Kind regards

  -Sidney

• "You have chosen to open -" research?

  While on Firefox and use Google as a search engine, it randomly opens a separate window asking «You have chosen to open -Search » I still press orders or a sort her out. It becomes very frustrating because every time I close and continue typing, it reappears. http://ImageShack.us/photo/my-images/412/firefoxerror.jpg/

  I tried to delete the specified file "mimeTypes.rdf", and even if it worked for a short period this behavior still appears on a random basis.

  By typing or by changing the element searched in google I sometimes a

  you have chosen to open save
  Search
  file type json

  dialog box that interrupts typing it at the prompt of the application. closing or trying to save the research resulting in the dialog box requires click to close the dialog and then apt reappear until I typed several characters more in my search request. Delete cache and cookies had a similar temporary effect

• WHAT YOUR COMPUTER CAN RUN IF YOU HAVE BASIC NOTE 3.0?

  I have a Windows Vista Ultimate 32-bit, and it has a base score of 3.0. What to do to run?

  Hello

  All that will take place on this system... the score is only an approximation of the ability to run programs.
  Most of the programs except for intense games will run. The manufacturer usually warn or indicate the minimum
  material and Windows are necessary for the performance of their programs.

  In Vista maximizing memory to 4 GB will help. Upgrading the video card and even the hard drive
  fastest disc can influence the score. Yet if can using a newer and faster set
  system also. Finally, the upgrade of components becomes unproductive.

  =============================================================

  Be careful that a lot of these programs and services really needs to run and often remove some
  contributes little to the speed of the machine while making the less friendly machine to use.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.

  Method 1 using Windows Defender will tell you more specific information about each program.

  ---------------------------------------------

  It's a little more complicated that you might have a few running services that you can do without
  However its really best to leave the default value of things only as strange services can get down
  the road.

  Also some programs add services that might not really need to start automatically.

  To view these compare those to start - type in the search box-> find Services just a click right dessu
  RUN AS ADMIN thereon to those of the default in Vista as listed here by BlackViper. Ignore and
  who are on the disabled (which do not run) or manual (which work only on request) - for all
  Automatic or automatic delayed start you can post them here if you need help to decide
  If you need to run. Some of these can be assigned to the judgment and manual so that the program calling
  can run them as needed.

  BlackViper made also some improvements to default windows services but I wouldn't
  These unless you really understand the full meaning of change a default service. So use
  It's like a tool to compare.

  Windows Services - list by default.
  http://www.blackviper.com/WinVista/servicecfg.htm

  -----------------------------------------------------------

  Here are some tools that will allow in the future that you gain experience even if the above
  Methods will do what you have to do for now.

  Window Watcher - free - do you know what is running on your computer? Maybe not. The
  Window Watcher says it all, reporting of any window created by running programs, if
  the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx
  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Windows Defender - tools - software explore - check here

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• The disc you have inserted not readable by this computer. What?

  I have been using an external hard drive (usb) for a few months. As I was falling images to save the disk I got an error that the disc is not readable. I have important files out there that has not been supported until a second source, how to make my computer to recognize the drive without formatting! I can also see it on my disk utility, but it won't allow me to repair the disc until I have format. What are my options?

  

  

  Try resetting the SMC and LANDAU with disconnected JEP, then re - connect and test. If you used another drive as your Time Machine backup, then the DHM has probably also been backup on it. If she has no HD doesn't have, so you can try the recovery of data such as DiskWarrior or DataRescue software and so those who fail, you may contact a data recovery service. Go on, ALWAYS make sure you have a redundant backup of all your data.

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• Message blackBerry Passport "Make sure you have sufficient network coverage" displayed even after deletion of security

  Hello

  Hope this message finds you well. I tried to download Skype from BBWorld, but after selecting the download option, the process was quickly interrupted by the following message is displayed: a network error has occurred during the processing of your request. Please verify that you have sufficient network coverage and try again."

  According to the workaround solution provided by KB33818, I conducted a security wipe. Unfortunately, even if Skype was the first application, I chose to download, the error message was re-elected.

  Can you please provide clear instructions on how to manually clear the cache of newspapers?

  Thank you so much for your help!

  Cezara

  Additional note: after this failure of Skype download, I managed to download, install and use WhatsApp successfully.

  Hello cezara888

  Do you mean how to clear the cache in the world of BB? If so, it is the workaround, How to clear the cache in the BB world.

  I'm curious for the Ko, you posted, because there is nothing of BB world. Can you please post the right pair?

  I can't find Skype in the world of BB, Amazon Appstore. I downloaded Skype using Snap, credit to the John_Clark.

  rudosx, I hope you don't mind, I joined this thread.

• Set up the RSA only for security server and not internally?

  Greetings,

  In the view Configuration > servers > Edit View connection servers > authentication, you can enable the RSA. However, I would like to use RSA for people who connect through the Security Server and not those who log internally.

  Does this mean that my only option is to add another view connection server and point the Security Server on this connection to the server on which I have activate the RSA?

  If so is not necessarily a problem, but it would mean, I have 3 servers of connection and server 1 safety for an environment of view rather small.

  Ideally, I was balancing these aswell which would mean 4 servers connection and 2 security servers. It is perhaps a little exaggerated, heh.

  Anyone know of an alternative solution?

  Thanks in advance!

  The way you describe it is the way to do it. The Security server is always associated with a connection to the server, so no way around it.

• Option 'do not load the tabs until you have chosen' missing

  I already have browser.sessionstore.restore_on_demand true (and browser.sessionstore.restore *) and game options 'show my windows since the last time' in general. When I reopen the firefox than only the active tab is reloaded, the others are there with their favicons, but empty. I have to click on each of them to activate then only recharge them. Previously, they were recharged automatically. PS: Please don't tell me how it "can delay firefox." I know. I still want to use this feature somehow in the previous versions of firefox and palemoon. Thank you.

  The box has been removed and reset because it was causing some performance issues with taking care of multiprocessu. You can always set it back. For instructions, see section Firefox can load multiple tabs in the background.

• Error message: ' the money is corrupt or not a Money data file. " Make sure that you open a file with a MNY extension. "If you have chosen the correct file and are not accessible, you will need open your most recent backup file to access your data.

  Hi just updated my pc at home for Window XP Professional 2002 with Office 2007.  Re-installed Money99 and progam opens fine, but I can't recover my files of saved Money and the aforementioned error keeps popping up.  Help please.

  Thank you

  Hello
   
  Your problem is related to Microsoft Money and would be better suited in the Microsoft Money forum. I would like you to post your question in the forum that supports your problem.
   
  http://social.Microsoft.com/forums/en/money/threads
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• iCloud Keychain could not be set up with a valid entry

  I use iCloud Keychain for a while now, but last year I worked on a computer not apple. There was therefore no need to sync, so I ignored when he asked me to check my account for her information.

  So now I'm back to Mac and I want to synchronize my Wi - Fi passwords with my iPhone. I tried configuring iCloud Keychain (I know the security code and I have access to my phone), but it fails on both my Mac and iPhone. The data there are really outdated, so I decided to reset it and create a new keychain, but I found only the options for that when it is turned on.

  What do you think that the issue can be? And what can be the solution?

  Notes:

  -below are the error messages I get

  -J' tried to set up for weeks now, is not a server failure. Also different networks.

  -I know that the right security code, and I have access to the phone number, if I get the verification code too.

  

  "iCloud Keychain could not be restored because there was a communication problem with iCloud. .

  Try restoring iCloud Keychain again. "on a Mac

  
  "One could not Set Up iCloud keychain" on an iPhone

  Hello Balint,

  Looks like you've tried some, but not all, the steps of troubleshooting for the issue you are seen day or setting to the top of your iCloud keychain.  Take a look at the resource below to this address.  I have highlighted some information for you here, but click on the link for more details.

  Get help using iCloud keychain

  If you cannot synchronize iCloud Keychain with other devices

  Make sure that your device is on a Wi - Fi or the cellular network. If the connection seems strong, try the following steps:

  1. Turn off iCloud Keychain on all devices.
  2. Turn on iCloud Keychain on the device that has the most up-to-date keychain items.
  3. Turn on iCloud Keychain on your other devices. They will be updated with your iCloud new keychain.

  If you no longer have your iCloud keychain items

  If you disabled iCloud Keychain on all your devices, your iCloud Keychain is removed from the Cloud. If you have chosen to remove the keychain of your devices when you have disabled iCloud Keychain, your iCloud Keychain is also removed from these devices.

  You will need to install iCloud keychain and add items again. Apple cannot recover your iCloud Keychain if you turn off iCloud Keychain on all your devices and choose to remove your iCloud Keychain locally on all your devices.

  On OS X, if you used Keychain Access to reset your OS X Keychain, OS X will delete your iCloud keychain items. Choose Keychain Access > S.o.s. keychain to verify and repair keychain settings and permissions. If this does not help, reconfigure iCloud keychain. If you need to reset your OS X Keychain again, temporarily disable iCloud Keychain in iCloud preferences before resetting your OS X Keychain.

  Take care

• you have the camera?

  I don't. Well, I had some undesirable point and shoot something that gives me mov 264 (thank God) I could test on my computer with cineform AVI conversion (to see if my computer mouse could handle)... and it's too mousey make a real documentary (my computer and cs3).

  So I have to upgrade to 64-bit, get CS6 thing production and move. Some here think that mov is not good because of the Quirktime (32-bit) and some think that mac (res pro) is not good and some other things... many think thoughts there. I couldn't care less.

  I want to get SOMETHING I can draw pictures of movement with... and change. In my mind at this point... because it is simple, YES, YOU'll get IT DEVINE... BEER THIRTY! YAY!

  That said, it is now to tell a story. How can we imagine shooting motion pictures WITHOUT telling a story? I can't. If I take photos even more of one or two of the same substance, it becomes a "series". If I shoot 24 fps it becomes now bound in time and on time tale... It IS ESSENTIAL, to tell a Visual story through the illusion of time and images.

  so... now what that? After decades of telling stories with such things we have tons of little gadgets that can record several images very quickly through chips etc... YAY!  What's up with fairy tales? Not much IMO. The part of it takes some planning and thought and finally some (YES YOU are DEVINE IT... EDITION! YAY! ).

  As this forum is about the change and tales, I think it is perhaps high time that someone started to focus on it a little more.

  I know help here as others who have no idea of how a computer works without talking about this suite of program etc, but it's really only going to be a successful product, if the results are decent and fullfill the dreams of the company try so hard to be a player in the world to tell stories.  It's not the 'market share' one can think. It is not the lowest common denominator. It is simply to tell a story and what happens with a beautiful product of end for all of us to enjoy.

  Let's start to talk more please... talk about Rodan, how he's lonely. Talk about your own stories at home and make some modifications to your imagination. Write the stories in your imagination and get there with shooting and make WHO finished with your editing using adobe products. PLEASE, I BEG YOU!  A freaking story! Sell something. Tell me something!

  If you just want to sell books or technical expertise and to be an adobe lover that is correct... your help is needed. But if please tell a story before he died with this revolution and allows to share in the forums. It is movement, not photographs. He revealing story and a lot of work, we're going to do. We will use what we have at our disposal and do it before everything degenerates into a sad story of the DEATH of stories in our culture!

  Rod,

  Perhaps you are overthinking the technical aspects of the colaborating on long distances. Think rather, how communicate you if they were in the same room. The same tools to work for both situations in most of the cases. I used to live on the coast of Easy and colaborate with people on the West Coast. No real movies, of course, or even documentaries. I specialize in the training, that's what I'm working on with other people when the opportunity arises. Yet, the tools we use are no different than the tools that you can use.

  For example, to tell a story, I imagine that most people start with a table of Storyboard. Sometimes it's nothing more than a series of sketches on paper 8.5 "X 11". (A4 or in other parts of the world). You could go to very difficult to animate tables storyboard, or using programs of professional Storyboard. Or, you can sketch out an idea on paper and just photograph the paper with a Smartphone and turn it into a PDF file. There is an app for that.

  The people at the other end and then print it out, draw on it and test it back in and send it. Or, perhaps, you paste the image into a Microsoft Word document and they can use the annotation feature to communicate. They open the image, edit and save the document as a new version number.  This kind of things back by e-mail or simply share a dropbox account specifically set up for this project.

  It is pretty basic, but what happens if you pointed out also a videocamera to yourself as you examined him each image? They would hear the tone of your voice, the excitement generated on ideas and hesitation on the other. Integrate with video images, and you have a way to really communicate your point of view. People respond to Visual cues. If they understand why you did something with a tool for editing and you then show them other choices, you are likely to convince that your way is the best, or they can challenge that. But you gave your best shot in looking them in the eye, as it and make them benefit from your experience.

  What happens if the video you posted above were places where you broke in and discuss why you have chosen to do what you did and what you think would work, and they have suggestions about this particular section? Put a solid screen without interruption under the video timecode, you post on Dropbox to make it easy for them to refer to your questions.

  What happens if you stopped the video at 6:12 and told them why he was left light parasite in, or why you intend to eliminate it in post?

  You have a video that plays all the way through to your first edit, and another who has the video of break you in all directions, discussing the editing of the scene next, coming, etc.. Or there are two ways and ask for feedback.

  These are the same things you could do if they were in the editing with you, room or conference room. Why let a little thing like distance cause a problem?

  If you are willing to work with time zone problems, there is nothing stopping you to share screens very early in the morning or late in the night with someone on the Internet. GoToMeeting is such a great place to go for such things. He is not fast enough for live video, but it is pretty fast, in general, to discuss the individual frames of a video and other concepts (same correction of color if you coordinate your monitors with the same brand of adjustment tool).

  If they have the same video source that you do, you pause while both watch the video off the screen, and then you both come back to discuss.

  If you need to work with another editor and you posted the source material where you can also use it well, then all you have to do is to share your project file. You post where they can get it, and they play the timeline the same as you would. If they have any suggestions they make changes on a copy of the sequence and download the project to download. This method is preferred when the project is divided into a single project by scene. This requires that you plan in advance and the use of drive letters that can be put in the same place on both computers or it becomes a bit complicated. I worked this way on a project once. Came out great. We ended up using drive letters S, T, u and V just to get to the top and out of the way.  I ended up leaving like that until I've changed computers. After that, it was funny for a have a D drive.

  So, no special tools. Nothing, you have not already. And nothing you can not do with this small point and shoot camera or mobile phone.

  I think of it this way. You edit a video to tell a story. Convince people that you know what is best for the final outcome requires you to tell a story of sorts. Collaboration is almost as showing both sides of one of these small documentaries that show how a movie was made.

  Before I call it quits for the night, to answer the question:

  Have you seen motion pictures that tells a good story, and he says well?

  I don't know what is good. I know only that if she catches my attention throughout the beginning to the end, if I care about characters, and if I want to film was to the end because another couple of hours would be fine with me, so the film is 'good '.

  I want to be entertained, but I want especially to escape the world being presented to me on the big screen. Take me to the 1860s with Lincoln and listen to his thoughts on the major issues of the day. Make me dream of sitting in the Chair of a starship captain. Take me dancing and let me fall in love all over again with the idea of romance.

  In many cases, I find that television allows me to bind with a character in a way that is not the movie. So when a great Director is tackling a TV project, I'm the first to set up the DVR. Give me time to learn enough on a character to love, hate, pity on them, or some emotion is desired by the Director. Unfortunately, not many great directors work on TV. But now and then, from time to time, it's going to happen.

  In other words, don't just tell me a story. Pick me up and put me in your story if I had to walk out of my door and found myself in England at the time of Jack the Ripper, I'd know what to do and who to trust. If you have not watched Street Ripper on BBC America, I can recommend it as a way to escape from reality for a little while that every week.

  Unfortunately, my wife and I won't to see movies very often. Most of what I see is on Showtime, HBO or Starz. The advantage of this, of course, is that I can go back and play to catch what was said or to make sure I saw what I thought, I saw. It disrupts the flow of the movie that the Editor worked so hard to get, but what I can say? It is what it is.

  Also on the subject of the tale, I watch a lot of videos of TED. This one is particularly relevant.  http://www.Ted.com/talks/andrew_stanton_the_clues_to_a_great_story.html

  There are a few other videos. These six are worth watching:

  http://www.Ted.com/playlists/62/how_to_tell_a_story.html