Keys AS3 error - cannot get to work

Similar Questions

• ERROR: Cannot get the size of the logical block for spfile

  Ran across the following error in the log of alerts for a the 2 node RAC database:

  ERROR: Cannot get the size of the logical block for spfile "+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora".

  Looked in MOS and found nothing.  Has anyone go through this before?  If so, what is the cause?

  Just received a resolution of Support from Oracle.  They said that this is a benign error and can be ignored.  Here is their answer to my SR:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  OK, after reviewing all that there seems to be no problem to fix. All configurations are correct. We believe that these errors are benign and can be ignored.

  COMMENTS

  ===============

  -L' ASM instance is online.

  -The Diskgroup: + XXXXXX_SYSTEM is mounted and has the physical and logical of 512 bytes sector size.

  -No error message in the alerts ASM journal.

  In light of the facts above, the message "ERROR: could not get the size of the logical block for spfile" seems benign and can be ignored.

  However, to avoid these messages, as a workaround, you can try creating the spfile pfile '+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora' and then try to create spfile diskgroup + XXXXXX_SYSTEM using this file pfile.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

• I have cs3 and cannot get to work on 8.1 windows.  Can I download a trial version of fireworks and use my product for full activation key?

  I use only Photoshop and Fireworks of my CS3 cd.  It is not compatible with 8.1 windows.  Can I download a trial of fireworks from the Adobe site and activate using my product since the original cd key?  I looked for patches and nothing helped.  Please help me with what I need to make prints of my paintings in oil.

  I rarely use Fireworks for print, but rather to render or my perfect images.  I used Fireworks for about 17 years and just uncomfortable with it.  I use Photoshop as well and see the simularities.  I see the writing on the wall with Fireworks going perhaps for the warmer, but still uncomfortable with it.  I received my original cd from Macromedia to my son as a gift and another gift years later.  I run a new art form, 'Conceptual Art' on my site and require Fireworks.  Maybe its time to spend on Photoshop, I'll see.  Thank you for your reply and your time. http://www.baywoodgallery.com/

• 1059 Error - cannot get 11 channels of data written in the spreadsheet file

  Hello everyone

  Again, it's Luke. I got the 7 fixed error, missing just a specific filepath to save data too.

  I now hit another snag along the way. When I enter data into a spreadsheet box writing, an error comes up saying "error 1059: unexpected file type".

  Anyone have any idea why its doing this?

  The only things that I put in the function box is some specific data on 2 GPS units I use, with a tension from my DAQ and the installation of strain gauges. Information works on my front and information is coming through, but will not save the data in a spreadsheet file, and writes a .lvm file will not work either.

  I will surround a printscreen of the configuration for the block diagram:

  

  Ohm Man wrote:

  I'm not sure of the exact file extension

  How do you define it?

  You set under whatever file name you put in your control filepath.

  I don't think it makes sense to get an error that says for attempting to write to a text file.

  Any chance you try to write the file to a path that you have not the full access rights to?  I think the error may be 1059, but it's actually be caused by a file windows error.  How about some strange characters in the name of the control that are not valid in Windows file?

• Use Hotmail in outlook express - error cannot get on server

  Does not reach the server, did could not ours and lock on the pop up, how it works?

  Hi Kim Aul,.

  1. you remember to make changes to the computer, after which the issue started?

  2. What is the full and exact error message?

  I suggest you try the steps from the following links in the article and see if it helps:

  OLEXP: Outlook Express cannot connect to Hotmail through Proxy Server

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  How to configure Outlook Express to use a Hotmail account

  I hope this helps.

• Cisco 881 cannot get wireless working

  Hi all

  I just bought a 881w and his works fine except the wireless part. Strange things are happening:

  (1) router is configured and works, I can browse the internet without any problem.

  (2) when I connect to the CCP, I can click on the option 'Wireless', and after typing my credentials, I can see the tabs 'Basic Configuration' and 'Network Configuration ';

  (3) I have assigned a static IP address for the wireless-access point (https://172.16.74.200);

  (4) when I click on the button "Launch Wireless Application" (which comes to open a browser to "https://172.16.74.200"), I get a Web page with just one button inside (see attached screenshot). When I click on the button, InternetExplorer gives a JavaScript error. When I look at the page source, I see where it won't: the JS function below uses the value of a field and expects some values. But the field contains a message of error-Cisco... Strange right?

  (5) when I add a network on the tab 'Network Configuration', my PC does not see a network, but it has the SSID is not visible (Yes = SSID broadcast, see the screenshots attached).

  Can someone help me? I think I ran out of options...

  THX!

  Kind regards Casper.

  Excerpt 1:

  function chkmode () {}
  var form = return [0];
  {if (isBlank (Form.officeExtendConfig.value))}
  return
  }
  var config = grep_string (/ ApMode /, form.officeExtendConfig.value);
  If (config. IndexOf ("Remote")! = -1) {}
  Window.Location.href = 'officeExtendapSummary.htm'
  } else {}
  Alert ("the AP isn't in remote mode.");
  return
  }
  }

  Snippet2:

  Hi, Casper,

  We hit the software bug... the link below will help you solve...

  https://supportforums.Cisco.com/docs/doc-13047

  Please follow the instructions and then try to access the graphical interface and configure the wireless access point.

  I would like to know how it works for you!

  Concerning

  Surendra

• DAC 11.1.1.6.4 fails with the error cannot get columns: ORA-01403: no data found

  Hello

  We strive to run a full charge in DAC, but it is a failure.

  The S_ASSET table is empty and therefore, we get the error

  Could not get column: ORA-01403: no data found

  We were not facing this error in DAC 10 g but after upgrade to DCA 11 g, this task has no place if the array is empty. How remove this restriction and DAC will work perfectly even if the tables are empty to full charge?

  CAD DETAILS

  Console Administration Oracle BI DW

  CAD build a 11.1.1.6.4.20121119.2022 Build date: November 19, 2012

  Management Console to install, configure, and administer the Warehouse Analytics of Oracle Business

  Schema version - 47, Index version - 36, repository version - 6, data version Seed - 16

  INFORMATICA - VERSION9.0.1 HF2

  
  

  Here's the log of IMG_BUILD - S_ASSET when this task was running in DAC 10 g. The task facing any problem when S_ASSET table was empty.

  [code]

  2013-12-23 15:34:29.644 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET began.

  the number of days of prunes: 4

  After change data capture: 2013-12-19 12:23:19.332 in full Mode.

  2013-12-23 15:34:29.69 - execution:

  TRUNCATE TABLE S_ETL_I_IMG_6

  2013-12-23 15:34:29.89 - executed successfully.

  2013-12-23 15:34:29.9 - execution:

  TRUNCATE TABLE S_ETL_R_IMG_6

  2013-12-23 15:34:30.145 - executed successfully.

  2013-12-23 15:34:30.16 - execution:

  TRUNCATE TABLE S_ETL_D_IMG_6

  2013-12-23 15:34:30.198 - executed successfully.

  2013-12-23 15:34:30.236 - execution:

  INSERT / * + APPEND * / INTO S_ETL_R_IMG_6

  (ROW_ID, MODIFICATION_NUM, LAST_UPD)

  SELECT

  ROW_ID

  MODIFICATION_NUM

  LAST_UPD

  Of

  S_ASSET

  WHERE

  LAST_UPD > TO_DATE ('2013-12-19 12:23:19 ',' ' YYYY-MM-DD HH24:MI:SS)

  2013-12-23 15:34:30.968 - executed successfully.

  2013 12-23 15:34:30.989 - execution of deleting duplicates rowid.

  2013-12-23 15:34:31.01 - successfully deleting duplicates rowid.

  2013-12-23 15:34:31.27 - execution:

  DROP VIEW V_ASSET

  2013-12-23 15:34:31.566 - executed successfully.

  2013-12-23 15:34:31.569 - execution:

  CREATE VIEW V_ASSET AS

  SELECT

  *

  Of

  S_ASSET

  2013-12-23 15:34:31.743 - executed successfully.

  2013-12-23 15:34:31.78 - execution:

  SELECT COUNT (*) IN S_ASSET

  The County is: 0

  Executed successfully: CHANGE CAPTURE: IMG_BUILD - internal S_ASSET

  (Number of attempts: 1).

  Executed orders:

  IMG_BUILD - internal

  2013-12-23 15:34:31.851 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET has finished running with the completed state.

  The same task, IMG_BUILD - S_ASSET fails when it is running in DAC 11 g, because the table is empty. Here is the log for the failure of the task to 11g.

  [code]

  2013-12-27 21:21:47.497 acquisition of resources

  2013-12-27 21:22:20.33 acquired resources

  2013-12-27 21:22:20.787 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET began.

  the number of days of plum: 5760

  After change data capture: 2013-12-23 21:19:19.233 in full Mode.

  21:22:21.211 2013-12-27 - execution:

  TRUNCATE TABLE S_ETL_I_IMG_6

  2013-12-27 21:22:22.384 - executed successfully.

  21:22:22.389 2013-12-27 - execution:

  TRUNCATE TABLE S_ETL_R_IMG_6

  2013-12-27 21:22:22.532 - executed successfully.

  21:22:22.534 2013-12-27 - execution:

  TRUNCATE TABLE S_ETL_D_IMG_6

  2013-12-27 21:22:22.546 - executed successfully.

  21:22:22.55 2013-12-27 - execution:

  INSERT / * + APPEND * / INTO S_ETL_R_IMG_6

  (ROW_ID, MODIFICATION_NUM, LAST_UPD)

  SELECT

  ROW_ID

  MODIFICATION_NUM

  LAST_UPD

  Of

  S_ASSET

  WHERE

  LAST_UPD > TO_DATE ('2013-12-23 21:19:19 ',' ' YYYY-MM-DD HH24:MI:SS)

  2013-12-27 21:22:22.614 - executed successfully.

  2013 12-27 21:22:22.616 - execution of deleting duplicates rowid.

  2013-12-27 21:22:24.72 - successfully deleting duplicates rowid.

  Could not get column: ORA-01403: no data found

  FAULT INFO: Error executing: CHANGE CAPTURE: IMG_BUILD - internal S_ASSET

  MESSAGE: com. Siebel.Analytics.etl.Execution.exceptions.ChangeCaptureTaskFailedException: Change Capture failed.

  EXCEPTION CLASS: java.lang.RuntimeException

  com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:536)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)

  com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  java.lang.Thread.run(Thread.java:619)

  : CAUSE:

  MESSAGE: change Capture failed.

  EXCEPTION CLASS: com.siebel.analytics.etl.execution.exceptions.ChangeCaptureTaskFailedException

  com.siebel.analytics.etl.etltask.ChangeCaptureTask.executeChangeCapture(ChangeCaptureTask.java:93)

  com.siebel.analytics.etl.etltask.ChangeCaptureTask.doExecute(ChangeCaptureTask.java:46)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)

  com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  java.lang.Thread.run(Thread.java:619)

  (Number of attempts: 1).

  IMG_BUILD - internal

  2013-12-27 21:22:31.526 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET has finished running with the Failed state.

  [[code

  
  

  The CREATE VIEW privilege was missing from the CAD database user, therefore, was not to create the step. I have granted CREATE VIEW and all is well.

• Cannot get wireless working in Portege R100

  I recently acquired a R100 which had no hard drive in it. I installed a 40 GB drive and downloaded the necessary drivers on the Toshiba site. Everything except the works wireless. All other dirvers were self-install but the wireless was not. How do wireless? Thank you... DJ

  First we need some basic information.
  Have you properly installed WLAN card?
  Wireless network card appears correctly in the Device Manager?

  You can use the key combination FN + F8 to toggle the WIFI?

• Cannot get his work when running applications with "Run as Administrator" all of a sudden.

  My daughter has been using my computer and done 'something' to him. To get the sound to work now under IE, Firefox, Ventrilo, etc etc I have to run applications as an administrator... even if my account has administrator privileges.  I'm at my wits end, because I've tried everything, and Google returns nothing to give me a helping hand.

  I am running Windows XP Pro SP 3

  I don't know that if Skyke was working or not, I removed it when I started to try to fix things. No program used his work properly, browsers, windows live messanger, ventrilo, etc..

  I tried both FixIt programs you listed above, found nothing.

  In the end, I gave up and reinstalled.

• 2.4 AnyConnect scripting onConnect, cannot get to work

  I can't get the onConnect or onDisconnect script to turn on.

  They download ASA, work if run manually from the command line (win - xp) and preferences "will allow login scripts" is checked.

  Any suggestion would be appreciated.

  No problem, glad I could help. Don't forget to rate messages and mark it as resolved if you are ready.

  -heather

• Cannot get NTP working on esxi5.1

  I have I have solaris ntp server and I can not get esxi 5.1 to synchronize with it.  Everthing looks like it is set up fine, but time does not synchronize.  The refid field remains on init.

  I ping the server ntp of esx and vice versa

  someone has this problem and has found the problem/solution?

  Thank you

  refid distance st t when poll reach delay offset jitter

  ==============================================================================

  RemoteServer. INIT.          16 u - 64 0 0.000 0.000 0.000

  2014 02-06 T 19: 06:38Z root: ntpd stop ntpd

  2014 02-06 T 19: 06:38Z ntpd [4042560]: ntpd outgoing signal 1

  2014 02-06 T 19: 06:38Z root: ntpd start ntpd

  2014 02-06 T 19: 06:38Z ntpd [4042778]: ntpd Fri Dec 16 03:55 UTC [email protected] 2011 (1)

  2014 02-06 T 19: 06:38Z ntpd [4042779]: proto: precision = 0.382 usec

  2014 02-06 T 19: 06:38Z ntpd [4042779]: listen and drop on v4wildcard 0 0.0.0.0 UDP 123

  2014 02-06 T 19: 06:38Z ntpd [4042779]: normally listen on 1 lo0 127.0.0.1 UDP 123

  2014 02-06 T 19: 06:38Z ntpd [4042779]: normally listen on UDP 123 10.241.241.5 2 vmk0

  2014 02-06 T 19: 06:38Z ntpd [4042779]: normally listen on UDP 123 10.241.241.13 3 vmk1

  You guys were right... I tried another NTP server and it seemed to work fine.   So it must have been networked.   There are workarounds for those who can get NTP.  If someone can find it in other threads and it needs, let me know.

• Edge Animate error: cannot get goods 'set' reference undefined or null

  I don't know why I'm getting an error 'could not get property "set" of reference undefined or null' when I insert into my edge Animations through Javascript in containers on my page.

  
  

  The error is emitted by version CDN (minimized) runtime at the following address: line: 97, column: 245 Any idea why this would be greatly appreciated! Thank you.

  It seems that this question was because I included the "xxxx_ege.js" file in the head. Who shot, first of all, even before I needed to load in the composition, because he wasn't in sight yet. So I just removed those file and it took these issues.

• Import image - error 'cannot get all the files for this device. "

  Try to import images from my camera - Canon T3i.  Using both the SD card inserted into a reader and camera with battery connected USB Gets the error "unable to get all the files on this device. Please make sure that the equipment is connected correctly, or that the battery is charged. Files that have been achieved so far will be sent to multimedia elements. "All updates installed, running Vista x 64, 10 elements.

  Okay, found the problem.  Apparently the PSE does not like RAID1 arrays, which is a bit ironic, beings that she deals with photos, and people tend to do not like losing pictures.  Newho, if anyone has this problem in the future, as workaround for Adobe not have their stuff together, rather than import directly to a RAID 1 has HARD drive table, import them on another drive, then copy them to your RAID array.  Very disruptive and I wish adobe would just fix their problems (no other program has this issue, even video editing software... «and RAID 1 should really be used for that), but to use it as a workaround if necessary.»

• I can not get windows to load.i have made the recovery discs, but cannot get to work. How can I make this .thanks

  When I turn on the computer, it goes to a blue screen and stops there.

  If you have performed according to instructions of the manufacturer of the computer Vista recovery disc and you encounter problems by encouraging them to work, you must contact the manufacturer of the computer for help.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• Export of CA via Media Encoder - cannot get to work. PLS HELP!

  I have problems to export my scene character animate as a .mp4 (or any video format) via Adobe Media Encoder? Whenever I do - using the value default and pre-loaded settings - video's fraked up (screenshot attached example).

  Everyone knows this!

  I use AE CC Version 13.8.1.38 and a MacBook Air El Capitan running.

  Eager for advice! Thanks in advance.

  

  As Jerry, it's fallout of a bug of SOUL involving non-standard width. We have a bug on this issue internally as well. I'll add another + 1 on this bug. For what it's worth, while I'm not an expert of low-level video format, I found that all the cases that I have seen this problem could be solved by changing the width to something divisible by 16 (even if it is hidden by another question in the extract 4 where SOUL it must be revived for a resolution change is taken into account).

  In any case, I thought I would mention that because it can allow you to make a less disruptive change to the resolution of your export and always work around the bug.

  Thanks - Dan Tull