Keys to 8330 not working blackBerry Smartphones

Similar Questions

• Reset password screen is coming and key board does not work

  Hello

  When I wake up in the morning and tried to start my mac pro 13 book he has not begun and this window appeared on the screen saying reset the password but unfortunately I can't type password as key board does not work... What to do now...

  

  Try to boot inSafe Mode and see if the problem persists?

  Restart now ' shift '.

  (Wait to take more time to start in this way because it runs a check of directory first.)

• Qosmio X 300-key Fn does not work

  Hello!

  My work does'nt-Fn button.
  I use Windows 7 Professional 64 bit and I downloaded & installed the value added package for Windows 7 64-bit.
  But my Fn key still does not work.

  So I uninstalled all drivers Toshiba again and reinstalled them.
  Nothing seems to work.

  What can I do?

  EDIT:
  I tried to find the Flash Utility card drivers for Windows 7 64 bit. But I can't find them anywhere!

  Post edited by: wuumbs

  > I tried to find map Flash Utility drivers for Windows 7 64 bit. But I can't find them anywhere!

  Of my knowledge Support Flash Card utility is not related to a specific model laptop.
  On my Satellite a series of laptop I installed Support utility of the Flash card that I found in the section L500 and it worked.

  Try this too maybe you control also the series which is more recent than L500.

• Satellite P100-221: FN key combinations do not work properly

  Hello

  I have the satellite p100-221 with pre-installed Win XP MCE. After a week of using my computer, a problem with the function keys blue appeared. FN - f1, fn - f2 and all the other fn keys combinations do not work properly. They seem to work, I can change the brightness, switch the touchpad on and out and so on, but no icon on the Info screen appears. While pressing the combination of function keys, the icons on the screen shows the time. How can I solve this problem? Is it software or hardware related?

  Thanks for any help.

  Hello

  I put t think that this question is related to the material.
  I recommend the update of the Hotkey utility.
  On the page of the Toshiba driver I found two different versions:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Your device is Satellite P100-221, then I guess the extra number must be PSPA6E.
  Do not forget that you are using the correct drivers for this device.

• When I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work.

  Original title: installation problem windows

  I recently had to reinstall windows for my pc that my HARD drive is dead and when I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work. Ive phone microsoft and they say, I have to buy a basic disk and then upgrade with the disk that has always worked for me? any suggestions?

  License upgrade and the key that's exactly right, used to upgrade a previous version (Vista, XP) for the version shown on the license (7).

  In order to use this key, you need to pre-install your o/s original eligible before moving to 7.

• My sensitive back of Web Site navigation bar does not work by smartphone - fewowiesbach.de. What can I do?

  My sensitive back of Web Site navigation bar does not work by smartphone - fewowiesbach.de. What can I do?

  It does not work because the jquery and JavaScript of Bootstrap files are not on the server, or if they are, they are in the wrong place.

  This topic has been moved, by the way, for the main forum for Support of Dreamweaver.

• Keys ' fn + ' do not work - Hp Probook s 4730. No "action keys mode" on my Bios.

  I have a Hp Probook s 4730 with 64-bit Windows 7 and Bios F.29. There are no blessed "mode keys" within this version of the BIOS, which is available on the HP website to download latest version . Yes, I looked several times for the keys to action or anything like him, but he does not really exist. My keys "fn + ' do not work!

  I see two possibilities here.

  (1) the most likely issue is that "support for action" is disabled in the BIOS.  Here is a document that shows exactly where the 'action key support' option should be located in the BIOS of your laptop.  So when you go to this section of your BIOS is not listed?

  (2) you have not installed "Support HP Hotkey'.  This is what contains the drivers for the function key (Fn) support.  You can download the drivers here.  After you download the drivers that you want to remove the drivers in the section "Keyboard" in the Device Manager and restart the laptop.  After the restart, re - install the drivers and try to use your function keys once more.  Finally, please post the result.

• Images of text may not of blackBerry Smartphones

  This new 9350 curve of love. Coming from a droid to Samsung Galaxy S, it's such an improvement.

  The curve is fine except that I can't send a picture in a text.

  I can email them, send to Twitter and Facebook but no texting.

  All text without images work fine. It is kind of a big deal for me as I do a lot.

  Any ideas?

  Sprint is the carrier. I have the plan.

  Thank you

  Hello and welcome to the community!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should contact your mobile provider to support formal... "Everything" is a marketing term, not something technical on what services you actually have of them (not all the "Everything" plans are created equal!). And, if you pay them for this service, they are not of it.

  Good luck!

• Data not updated blackBerry Smartphones when inactive phone

  Hi all

  Recently, I removed my main of my device e-mail address while he is on vacation.

  I just put back it, but now I find that data (emails and BBM) are not updated when the phone was in bag for awhile.

  If I put myself in response to or sending emails or BBM of unit all starts update again and all emails in circulation and BMMs come out at the same time.

  Everything working the normal flow is restored, but after being in the Pocket for awhile everything stops again.

  Any ideas?

  I noticed the problem when I started getting these archaic messages called SMS asking me why I do not answer to my BBM... naturally the idea of not receiving them is scaring me senseless!

  Kind regards

  Erik

  Hi and welcome to the forums!

  We need to know what version of the software on your device.

  Check the version of operating system of the device, and then use the correct steps to register your device. Basically, you refresh your network connection and the software to control the connection on your device.

  Thank you

  Bifocals

  KB23393 How to check the version of the BlackBerry Device Software installed on the BlackBerry smartphone

  KB00510 How to register a BlackBerry smartphone with wireless network

  KB02141 How to reset a BlackBerry smartphone

• Satellite L650: With the FN key combinations do not work in W7x64

  Hello

  System
  

  Satellite L650-1KU

  Part number
  

  PSK1LE-01700MRU

  
  I have install Windows by myself - this laptop don't have any operating system from the factory.
  Installed Windows 7 x 64, all drivers and utilities site driver Toshiba for windows 7 x 64 available for my laptop model.

  I have no any unknown device in the Windows Device Manager, all the installed drivers and all hardware components woks fine i.e. camera wifi or bluetooth or web.
  But I still can't use some combinations of keyboard with the key Fn. not all, only five combinations do not work: modes of energy Fn + F2 Fn + F4 hibernation, Fn + 1, 2 zoom and devices wirelles Fn + F8.
  Search, I found only mentions on Fn + 1, zoom 2 - this funtion providing some util named Toshiba Zoom but no any Toshiba download page don't Zoom for my model of laptop and W7.

  Looks like it must have installed some additional tools provider for the manipulation of this combination, but I can't find any soft or extra info on the driver download page.
  Maybe there are a few utils which must be placed in lists of drivers/software for 32-bit windows and it will be very good for 64 bits one?

  All the combinations that works great as volume + Fn + Fn + 4 3 or mute Fn + ESC does not show any popus time of pressing, just functions without any indication.

  Dear users and support, can you help me what should I install utils extra to support the Fn + F2 modes of energy combinations, Fn + F4 Fn + 1, 2 zoom hibernate and Fn + F8 wirelles devices?

  Post edited by: Gimli_r

  Akuma is right. For the feature keys FN, you install Toshiba Value added Package. This package contains several different applications.

• Qosmio G30-223: keyboard key '2' does not work in console/konsole/xterm in Debian

  Hello

  I installed debian on a qosmio g30-223, it works correctly except the key of a keyboard in console/konsole/xterm.
  Under KDE, all the keys work but when I'm under a console (without xorg), konsole or an xterm, the '2' key (shift + a) does not work.

  It is a french keyboard layout and a card keyboard fr-latin9. Before connecting, the key also works.

  Any ideas?

  Hi face,.

  I have gentoo with 2.6.17 kernel and windowmaker as office. I know this problem. Maybe it s an idea to check the file xorg.conf to map keyboard under X then to change the keymap under console as X replaces the console overview.
  If the worst comes to the worst, try "dpkg - reconfigure console - data ' to choose a new layout for your page layout.
  I think that there are more keymaps under the hull for french available key-layouts, just to play with it. :)

• Satellite L850 - 13N - function keys ("FN") does not work

  Hello

  I have Toshiba Satellite L850-13N with Windows 7 x 64. The problem is that my function keys does not work. Could someone write me that I need to install drivers?

  PS. Sorry for my English :)

  Thanks for the help.

  Hello

  Are you using the original os that you got with your laptop?
  What you need is Toshiba Value Package added. Try please reinstall.

• 2 magic the fn key keyboard does not work (PC windows 7), so I can't exhaust remove fn, fn, fn low... and so on...

  2 magic keyboard fn key does not work (PC windows 7), so I can't use Up, fn, fn + DEL, fn + down... and so on...

  Assuming that 'Boot Camp', correct?

  Search here > https://www.google.com/search?q=magic + keyboard + 2 + windows + on + a + mac + boot + camp + site: apple.com...

• These recent key apps does not work does not correctly

  My recent phones apps key was no longer works. He works in time more than 2 out of 10, or less. Any body having the solution for my problem.

  Try restarting your device first. If it still does not work, then maybe try a Factory Reset.

• 'Write Key.vi' does not work after generation

  I'm having trouble with the "Key.vi write" I use it to record the calibration values in an .ini file. It works fine when running in mode of development, but after that I build it into a stand-alone exe it does not work. It will create the file in the correct folder, but it is empty. I don't know how to figuing this one initially. Any help would be greatly appreciated.

  The following code stores the configuration values in the .ini file. I'm using LabVIEW 8.0

  

  Why my executable does not work when you use the constant path of the current VI? -Knowledge base - Support...

  I'll let someone another chime in here about all local variables. They are there, waiting in the bushes, ready to pounce when they see one of these little critters. It's always the season for them.