Keywords disappear

Similar Questions

• all changes, ratings, and keywords went

  I hope someone here can help me, I'm at my wit's end and can not find answers online either.
  I use LR5 (Win7) and have my photos and catalog on an external HD (E :). We are talking about 45 000 photos, taking about 1.2 TB. Please bear with me it's complicated and scary.

  When I turned on LR the other day, I had forgotten to plug in my HD external (e) first. When I did it after the fact, LR practically crashed. Even after a reboot, the structure of the catalog was there, but pictures were gone and LR was looking for a F: drive, even if the connected HD is E:. So I added the E: drive to the section of the new file and imported pictures. Since then, ever-present F:, grayed, in the section files and cannot be deleted. Everything went well at first glance, the pictures were there, but after awhile, I realized that all my changes, the sides and keywords disappeared! Only a few pictures, which had been published in a different and backup software in LR as .tiff or .jpg had retained information. After unsuccessfully trying different things, I decided that my catalog must be corrupted. I find the previous backup on my C; by car (unfortunately, this backup is missing about 15 hours of work, I know - I know...) and started LR with this catalog backup and everything worked well. So I copied that backup to HD (E :) and renames to my usual catalog name (I renamed and kept the original, "corrupt" too).) Low and behold, this copy of the catalogue backup suddenly didn't work more. He has done exactly as "corrupt." So I went back to the original location of the Catalog backup on the C: drive and attempted to restart LR in there once again, and it does NOT more more. And creepy it is, it shows the structure of the correct catalog, seems to have all the changes, ratings and keywords, but is looking for images on the F: drive that does not exist! Well, it does not actually exist, but it's my backup drive that is not connected. The E: drive does not appear in the records section at all, as when it happened first. An older backup that I will go back to doing the same thing now. BTW: at some point during the race together, I upgraded to 5.7 LR., in the hope that it could solve the problem in which case LR itself had been damaged. Made no difference.

  Help!

  As you have discovered, re-importation of pictures will often lose metadata (changes, keywords, captions, collections, etc.), and so re-entry is the last resort when you cannot recover a working catalog.

  In your case, I think the problem is that some windows point renamed drive letters.  Rather than worry about how it happened, we will focus on obtaining a working catalog.  You said that your backup of the catalog references the F: drive, rather than the E: drive.  It is easy to fix, according to the methods described in the link DJ_Paige posted above.

  1. once more, make a copy of the backup catalog and open LR on this copy.

  2. in the LR Folders pane, find the F: drive. The folders listed under the F: drive should have a "?" on them, indicating that they are "missing" (in other words, they run sites that think LR does not exist in reality).

  3 right click on one of the top-level folders, and select view the Parent folder:

  

  Repeat until the folder in the foreground is F:.

  4. right click on the folder in the foreground F: (which will have a "?" on it) and select find missing folder:

  

  A file browser will open - select E: and click Select folder.

  5. at this point, the folders pane should show the E: drive, no "?" on folders, and you should be able to navigate to all of its files and display photos in folders. The folders pane may still present the F: drive, with '? ' on his records - if so, restart LR and it will disappear.

• Keywording importing disappeared

  I used to enter keywords when importing into Lightroom, but suddenly this box/option has disappeared from the right part of the screen to import. Does anyone know how to restore that? I use Lightroom 3.5

  Thank you
  Lynne

  Right click on one of the group headers and check "apply during import.

• Disappear keywords Bridge CS5

  I know that this has been talked about on the MAC and PC forums for the bridge and has been a problem with the version of CS3 to CS5.  However, it doesn't receive the attention of Adobe.

  I went through the Mac and Win from CS3 to CS5 forums and there are several lists of people lose their key words.  I just lost againmine, after their reconstruction about two weeks ago.  On another call, 3782474, Paul graciously produced a script to build your existing keywords.  You have to reenter the!  Adobe, PLEASE fix this.  I copied the key file and saved it to a backup location. When I lost my file this last time, I restored this file.  He stll did not work!  I have not updated all Adobe products, other products of window or patches.  The only thing I've done in the last two weeks is photo editing and goes from a disk storage across the bridge to find photos.  I'm afraid that if I lose the one I have just manually recreated that I no longer use bridge since it is one of the features that attracts me to it.  I don't know there are other products to a keyword search.

  Adobe, I hope you read this thread and take control.  I'm running on Windows 7 and Bridge CS5.

  Thank you

  Bob

  cindym65915079 should always go back actions. I suggest manually record each separate action set out in the files individual .atn , while another method is to save the entire file Share Palette.psp :
  

  Preference file functions, names, places | Photoshop CS5

  It is probably a good idea to backup your Adobe Bridge Keywords.xml (completely filled) file manually too.

• Why the keyword "google" is not accepted?

  I use keywords in search bar url bookmarks. Now the key word 'google' for my missing suddenly google search and if I reintroduce, it is not stored with the bookmark. Different bookmarks are accepted, but not "google".
  What can I do (except using a different key word)?

  Well, somehow, the problem just disappeared after a while. The keyword "google" works perfectly again.

• Keyword shortcuts

  Hi all

  Finally, I discovered that pressing on makes it key option that work the keyword my shortcuts. What I want to know is:

  Is there a way just to press one key without the key option, as well as the opening?

  Is it possible to reject a photo and make it disappear, also like opening?

  See you soon

  Waddo

  Your keyword shortcuts should work without the key options, if you keep the open keyword Manager pane. In the menu window: window > Show ⌘K keywords Manager

  Is it possible to reject a photo and make it disappear, also like opening?

  You can hide photos by pressing ⌘L.  Hide will remove photos Moments and Collections, but they will be always shown in all the albums.

• How do I change Google to DuckDuckGo when you CTRL + K or CTRL + J? (I have already changed the about: config > keyword.url)

  Hello. I have something I want to change the default behavior, but I can't do it.

  Here's what I want to do: I want to change www.google.com to www.duckduckgo.com. However, when I do CTRL + J or CTRL + K he continues to send me on www.google.com.

  Here's what I did: I found that the search bar is now useless. Indeed, the "awesome bar" is so awesome that I have basically need the bar more research. Thus, for a long time, I took it.

  There is only an advantage. When the search bar disappeared, the shortcut which was to place the cursor on the search bar got another behavior. When I use CTRL + K (CTRL + J), the page would automatically change to www.google.com.

  I liked this behavior, because at the time, I used google as my search engine.

  But now I want to duckduckgo, I'm kind of embarrassed by it, especially since I cannot change this behavior. I have re-enabled the search bar and changed the search option above to DuckDuckGo, in hopes that will change behavior. He did not.

  In addition, as DuckDuckGo has said, I changed on: config keyword.url and keyword.enable.

  But I still have the www.google.com when I press CTRL + K/J

  I asked the question to my stream of Diaspora ( http://diasp.org ) and was able to get a solution in the day. Go figure. Before doing this, you will already have DuckDuckGo added to your list of search engine (in the drop box).

  Here is the solution. With the permission of ilyse na' IMO kazar

  in the subject location bar: config. You will need to confirm when you are advised that «this will void your warranty» You will see a bunch of preferences which, if you have never done this before, you never imagined exist under the hood of the FF.

  In the filter bar type browser.search.defaultenginename. In the column 'Value', says Google. Double-click the word Google and a dialog appears allowing you to specify the default engine again. TypeRegeditdans DuckDuckGo exactly as it appears in the drop-down search engines available in your browser. On my Mac the magic string is "DuckDuckGo (SSL)" without the quotes.

  About: config and check it, out worked for me!

• Then I answer emails all at once the message disappears

  I lost half a page of a response to an important email. The entire response without my intention, it has been deleted. I didn't at all other keys that the letters I was typing.

  Sometimes, the cursor goes to another part of the screen and will not move for a few seconds. Strange alternative sliders appear as a small bar gray or crossed arrows used in graphics programs. Even if I click on the mouse, they remain for about 5 seconds and then disappear on their own.

  My keyboard is haunted? (Just kidding, I hope)

  There are two Favicons (small drop icon) in the Navigation toolbar

  First is on the address bar (where you type the Web site address)
  Second is on the search bar (when you type the keywords for the search using the selected-> default search engine is Google)

  -> click on the favorite icon (small drop down menu icon) on Firefox SearchBar-> click Manage search engines -> select all unwanted search engines and click delete -> click OK

  Screenshot of SearchBar Favicon is attached. Check and tell if its working.

• Dictation commands disappear & dictated stops working

  I have the same recurring problem in two different versions OS X El Capitan on two different laptops (10.11.3 on a MBA 2014 & 10.11.4 beta on MBPr 2014).

  Initially dictation (dictation w / reinforced enabled) will work properly on machines, or by using the keyboard shortcut Fn Fn or with the active keyword, but after an hour unspecified walking in slow motion, and before the laptop goes to sleep, suddenly trying to use dictation, the program no longer and interesting things When I click the icon of the dictation in the menu bar and select "View dictated orders" it is empty. Dictation commands have completely disappeared. They were there in their entirety when the program worked but obviously, at some point, they disappear and stop Dictation to work. There is no internet connection problems that contribute to this question.

  I am come with zero solutions to this problem and I'd love some suggestions to try to resolve the problem. Thank you.

  Try this it seems to work for me. Goto the menu bar and click on the microphone dictation goto command Preferences and then uncheck the box and stop Dictation. I had to fiddle around a bit to make sure advanced was unchecked and closed off the coast, then I liquidated, to reopen and double-check everything. Once I was the decline of the dictation in low reloaded. I hope this works for you also.

  Good luck!

• Keywords in Photos: I'm the only one?

  I am a heavy user of Photos with 20 000 (non-professional) pictures in my library. I spent hundreds of hours of editing, new date and keywording photos pictures (and iPhotos before that). I had a very rough transition from iPhotos to Photos, lost randomly some images, lost random meta data. I am running the latest version of iOS and were at the Apple store dozens of times trying to address any inconsistencies in my photo library. They tried everything short of the nuclear option of pictures of wiping and re - install new, no back-up, which is probably damaged. This option is not possible for me given I would lose all the work that I gave to this labor of love. At this point, I just hope that someone smarter Apple will address these glitches, so I can save my sanity.

  I'm struggling with the loss of functionality in the Photos that I wait patiently for features to be restored (securities transfer of lots, bulk as of a date change, etc.) In the meantime, keywords are sent adjustments. Keywords that I delete do not disappear and appear in searches. I have four key words called '4 star' who all have different pictures in them. I sometimes manually put the different lots '4 stars' key words a single keyword '4 star', but a new keyword is often re-creation. In other words, it's a manual solution sometimes, but only temporary. According to the issue of not really deleting keywords, keywords because duplicate like tribbles makes the problem even worse. I have at least half a dozen keywords in double at some point. Replication problem of keyword seems to be more common with the keywords 'stars' who were previously only stars, but there are many other duplicate keywords.

  My question is: does anyone else have these questions, and if so, did you understand any workaround? I am beyond frustrated. I went full-Apple and full-pictures for this project, and can't give up now. Other chronic problems with Photos?

  P.S. I have also submitted comments from the Apple but don't hold my breath.

  Can you please tell us something about the origin of your photo library?  All my problems with keywords in the Photos had their problem in Aperture and my photo stream.

  Your photo library a new library, was born in pictures, with new photos that have never been in another library, or did you migrate your library somewhere.

  If your library consists only of new photos, and all the keywords have been affected in the Photos, it should help to use the keywords and click on "Edit keywords".  You can use the edit mode to remove all unused keywords.

  But if your library has been migrated from a different library (iPhoto, Aperture) and allowed you to open write the key words in the original images, you're stuck with old advertising keywords, misspellings in them. Photos cannot remove key words written to the original captain of the files.

  I used exiftool from the Terminal to remove all the original files of the masters key words and started in Photos.

  To install exiftool: http://www.sno.phy.queensu.ca/%7Ephil/exiftool/install.html

• CD/DVD drive disappears and event log show EventID 9 [qualification] 49156 then EventID 12 49152 [qualification]

  Vista Ultimate SP 2 using Dell XPS Studio 420.

  Dell support has been useless after several visits there replacement DVD player twice and destroy several Roxio Creator installs.  This problem seems related to a sort of better power management problem that I can determine.

  When the problem arises that the system hangs for 30 seconds, then the DVD player to a disappeared from my computer.  Once the map his farm work as well.  A reboot of the system always restores these problems but then some time later they breed.  This problem occurs quite often a few times several times a day.  Here's the event log entries complete:

  -System

  -Supplier

  [Name] iaStor
   
  -EventID 9

  [Qualification] 49156
   
  Level 2
   
  Task 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2010-04 - 27 T 01: 59:20.881Z
   
  EventRecordID 144570
   
  Channel system
   
  Desktop
   
  Security

  -EventData

  \Device\Ide\iaStor0
  0F0005000100000000000000090004C00100000000000000000000000000000000000000000000000000000000

  -System

  -Supplier

  [Name]  PlugPlayManager
   
  -EventID 12

  [Qualification] 49152
   
  Level 2
   
  Task 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2010-04 - 27 T 01: 59:52.000Z
   
  EventRecordID 144571
   
  Channel system
   
  Desktop
   
  Security

  -EventData

  HL-DT-ST BD - RE BH20N
  IDE\CdRomHL-DT-ST_BD-RE__BH20N___C105___\4&369efe6a&0&0.2.0
  00000000

  Additional information from http://www.intel.com/support/chipsets/imsm/sb/CS-025783.htm

  "Timeout errors reported by iastor or iastor (v) in the Microsoft Event Viewer.

  "A change was made by Microsoft in the Windows Vista installation process. The result of this change is that the register Intel® Matrix Storage Manager LPM parameters which were intended for mobile installations are added for both office facilities. These LPM registry settings are added to both the RAID Intel® Matrix Storage Manager driver on the installation Windows Vista, as well as for all the added drivers disc during installation.

  Serial ATA desktop devices such as hard drives and CD/DVD drives have been reported that do not comply with the specification Serial ATA LPM and display erratic behavior when LPM is enabled.

  Because changing the configuration means that LPM is enabled by default for all Windows Vista platforms, using a device that does not completely respect the specifications may cause one of the problems listed. »

  I'm at Version 8.6 Intel Matrix Storage console well beyond the recommended version to solve this problem.

  Other research indicates that a registery hack is needed to solve this problem because the Intel driver is not yet certified (?).  The question is why a laptop power management setting is defined in a desktop computer.  It seems that these registry settings cause the hangs and the loss of the DVD player.  See http://derek858.blogspot.com/2009/01/windows-7-intel-sataahci-lockups.html

  The registry entries are for all ports are: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStor\Parameters\Portx] "LPMDSTATE" = DWORD: 00000001 must be zero.  I have not yet tried it.

  Chris,

  Yes, the problem has not reoccured since the installation of the latest Intel Matrix Console now known as Intel Rapid Storage Technology (RST) v9.6.0.1014.  I ran for ten days with the plague of your Player DVD which disappears and the EventID 9 [qualification] 49156 log records.  It seems to identify iastor.sys with this version of the code as the fixer of the problem and the culprit in earlier versions.  I don't see anything on the Intel site that explains the difficulty.  One would think that they could speak and help those who have the same problem.

  Thanks to all who helped.

  Dave

• ITunes.exe disappears in Win7, Exception code: 0xc0000005, failed module name: es.dl

  On a computer laptop 64 bit of Windows 7 Pro SP1 Toshiba Satellite A505, when I run Itunes, no window never appears. If I look at the Task Manager, "itunes.exe * 32" appears briefly and then disappears.

  I ended ipodservice.exe, no diff. ITunes started in SafeMode to Itunes, no diff (in windows Windows safe mode OR normal mode).  I tried to create another user - same question. I tried to disable the antivirus. I have scanned for viruses.  I uninstalled ALL of the apple software and removed ALL the apple on issues (including Hello, apple blah, quicktimes, itunes, etc.), as in
  http://support.Apple.com/kb/HT1923

  The problem persisted. After the most recent removal / reinstall, I went to the event viewer > applications and found the following. I have not found anything online about es.dll and itunes.

  _______
  Log name: Application
  Source: MsiInstaller
  Date: 31/07/2014-18:07:11
  Event ID: 1039
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: Owner-PC\Owner
  Computer: Owner-PC
  Description:
  Product: iTunes. The application attempted to change a protected Windows registry key \CLSID\{44EC053A-400F-11D0-9DCD-00A0C90391D3}\ProgID.
  ____

  Log name: Application
  Source: Application error
  Date: 31/07/2014-18:09:29
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC
  Description:
  Name of the failing application: iTunes.exe, version: 11.3.0.54, time stamp: 0x53bc1265
  Name of the failed module: es.dll, version: 2001.12.8530.16385, time stamp: 0x4a5bda4e
  Exception code: 0xc0000005
  Offset: 0x00006ef9
  ID of the process failed: 0x1aac
  Start time of application vulnerabilities: 0x01cfad253d3a5a2a
  The failing application path: C:\Program Files (x86)\iTunes\iTunes.exe
  Path of the failing module: C:\windows\system32\es.dll
  __

  Log name: Application
  Source: Windows Error Reporting
  Date: 31/07/2014-18:09:33
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Owner-PC
  Description:
  Fault bucket 378197881, type 17
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: iTunes.exe
  P2: 11.3.0.54
  P3: 53bc1265
  P4: es.dll
  P5: 2001.12.8530.16385
  P6: 4a5bda4e
  P7: c0000005
  P8: 00006ef9
  P9:
  P10:
  ______

  These indicate any fix that I have not already tried above?

  Yes, I did, including "blah apple."

  That's why I've included the list of apple, if you missed something.

  Did you read this part of my answer?

  "If the advice already given does not, please contact Apple Support for assistance."

  See you soon.

• Lightroom keywords do not register

  To import my files I add keywords as I have been in the past.  They appear in the window keyword, but when I press on enter they disappear and appear not to be save in the various categories.  Is this a known problem or is there something that I am missing?   Windows! 0 Lightroom CC 2015

  try to restart Lightroom, or restart your computer

• Help! Keywords and changes of my suddenly missing photos in Lightroom 5.7

  Hello

  I have a problem with my Lightroom 5.7 for which I really hope to receive a solution.

  I just noticed that some of the keywords and the changes that I made my pictures have disappeared. By changes, I mean things that you in the view to develop, such as the adjustment of brightness, contrast, saturation and noise reduction. They just do not appear in Lightroom more even though I know that I have modified these photos. Also when I try to export these photos, the changes that I made once aren't there.

  This problem appears only with some of my folders, 16 files among hundreds to be exact. 15 of these folders are located side by side on the folder view, and a folder is in another place. In most cases, both keywords and the changes of all the photos have disappeared. In some cases, key words remained miraculously while only the changes disappeared.

  I don't know where this problem began or occurred. Today, I use Windows 10, but a month ago I always had Windows 8. I don't know if changing Windows 10 could have something to do with it. All missing modifyings was carried out before the windows 10 updated, but here again so were hundreds of other changes that have not disappeared. The files are located on an external hard drive on which I store all my photos.

  What someone has an idea of what I could do to restore missing keywords and the changes in the photos? I would appreciate your help.

  I already tried to synchronize folders and change the USB portal on which my external hard drive is attached to, but without any result.

  I made several backup copies of my Lightroom, as always, it indicates what closing the program, but the restore of a backup probably would lose all of my facts and recent gestures on Lightroom, so I'm reluctant on using this option.

  More details here: How do I import photos from Photoshop Elements, other Lightroom catalogs or applications like iPhoto in Lightroom

• Eclipse does not recognize "The default keyword" and "Lamda expression."

  Hi guys, I just started to learn Java, so I don't know much. I have a very annoying problem with Eclipse (I have the latest version installed). For some reason, whenever I use the "default" keyword in an interface, it gives me an error similar to "Default token syntax error", I deleted the "default" keyword, the error disappeared. The same with 'Lamda Expression' as well, I have this object as this Actions myActions =-> () {System.out.print ("Blah blah blah") ;};}   , Eclipse also displays the error message similar to "the body of the method expected after (), delete"->" I checked the version of Java that I have, it is also the most recent, I don't know what it is bad here, any suggestions are greatly appreciated. I thank very you much for your time and your help.

  It happened because I used the line tool of command rather than running using Eclipse. The two image links show errors in Eclipse.

  No - it happened for the reasons that I said:

  Where variable number IS called 'AnimalName' in this interface - that's the problem: not the word "default".

  You can not refer to objects that do not exist.

  This interface code will not compile from the command line or from an IDE, because it contains ERRORS.

  public interface Actions {}

  void Breathe();

  default void run() {}

  System.out.println ("can run 10 miles without stopping!" + AnimalName);

  }

  }

  Where do you want that Java to get the value of "AnimalName" of? It does not exist anywhere. You set in another class as follows:

  public String AnimalName;

  This means that it is a variable "instance". Impossible to refer to instance except as part of an "instance" variables The interface has NO instance of the Animal.