Kit 3 in 1 it was shipping internationally?

Problem:

Attempted to buy the knocked down kit, 3-in-1 for my Fuze. Purchase of had it directly results in ridiculous shipping fees, something like $50 USD for the kit + shipping costs. Hardly worth it.

Tried to buy it on Amazon, but they would not send it to the New Zealand. Why, I don't know - a music player Holster is an electronic device only.

Anyone know where I can get and get it shipped internationally?

Have you tried www.amazon.co.uk?

Tags: SanDisk Sansa

Similar Questions

  • There was an internal error and Internet Explorer is unable to print this document

    Original title: printing problem: I have a Dell AIO 810 and HP computer with windows 7.

    I have a Dell AIO 810 and HP computer with windows 7. I installed the driver from Dell, but get the following message when you try to print. "There was an internal error and Internet Explorer is unable to print this document." I ran the troubleshooting, but he could not find a problem. Can anyone help?

    Michie,

    To check if a driver/software installed on the computer, you must go to "Control Panel", and then to the section "uninstall a program". Under "Uninstall a program", you will find all of the software including drivers for printers, and then the other devices connected to the computer may be listed.

    Because you cannot print any document, I would have you uninstall Dell printer drivers and then try to reinstall drivers it and check if the problem reappears.

    Pour desinstaller uninstall printers Dell and associated products to the printer, go through the steps in http://windows.microsoft.com/en-in/windows/uninstall-change-program#uninstall-change-program=windows-7

    Note: Unplug the printer from the computer and then try to remove the software.

    You can even go through the steps in http://www.dell.com/support/troubleshooting/us/en/19/KCS/kcsarticles/articleview?docid=266369

    Let us know if that helps.

  • Satellite A30 - I want an internal WiFi card

    Hello

    I am looking for a mini wifi internal card for my laptop A30, I know its old, but I just want to do, can anyone recommend a good market to get?
    EBay is an option?

    Can I use any internal mini wifi card or?

    Thank you

    Hello!

    Have you checked if you have a WiFi switch on your laptop? If you have such a change, you can buy and use an internal WiFi card.

    You must use a WiFi card that supports the 802. 11b standard, for example Intel.

    Of course you can search on eBay and a map of second hand too because some Satellite A30 was shipped with the wireless card.

    Good bye

  • cost of shipping & import

    I want to order an iphone 16 GB in Greece/Crete MC. Anyone know the cost of delivery and import taxes?

    If you mean that you place your order on the Apple USA online store, you can't.  All Apple online stores require payment with a native method in their country of service, with a billing and delivery address in the same country. They will not ship internationally and they do not work with currency conversions.

    If you live in Greece and the desire to buy the Apple online store, you will need to use the store Apple of Greece.

  • Portege R600 - y at - it a radio available internal broadband?

    Our previous laptops had internal radios from Sprint for access to broadband.
    Sprint will give us external modems for the R600, but it would be great if there was an internal option - one less gadget to drag around.

    Is there such a thing?

    Thank you!

    Hello

    To be honest I m not Portege R600 owner but I searched a bit the Portege R600 properties and specifications and unfortunately I didn t find all the details about this feature, so I doubt that this is possible with the Portege R600.

    Greetings

  • How to force the compilation released executable before running the distribution of LabWindows/CVI kit?

    I am new in 2015 of the CVI. I used CVI 7 and when I chose "Create the Kit of Distribution", when I was still in debug mode, Labwindows asked me to build the executable of setting before creating the Distribution Kit. This does not happen to CVI2015, and the Distribution Kit is created with the latest built executable version, although I made a few changes in my code! This is a problem since I work in debug mode and I usually forget to build the executable of liberation before calling the distribution kit, so I need CVI to do it automatically like CVI 7 did. I suppose that there is an option to do this, but I can't find. Can someone tell me please how to resolve this problem and force CVI to build the exe version before building the distribution kit? Thank you.

    Today, I've solved quite simply create a new distribution. The previous like unsing was automatically imported by CVI7 project. By creating a new distribution, now when I change something, CVI ask me if I want to build the release. So I did not understand the problem but I solved it by editing a new distribution kit.

  • Convert an internal drive in external drive = how fornat Lenovo's Style

    Hello

    I want to format my internal drive which is now an external HD = how are we doing? Knowing that it was an internal HD = with The Hard drive / The Recovery HD / and Drv system :/

    Thanks for the help

    Search in windows disk management program.

  • Dell laptop lost during shipping

    I order a lot of Dell computers over the years - computers laptops and desktops - all without any problem.  I guess that my luck ran out this time when I ordered a Dell Latitude Dell taking.  Dell has processed the order correctly and it was shipped by FedEx Ground. The problem is that the laptop did not appear and it is now a week late from the original delivery date.

    I contacted FedEx and they launched a package of Trace.  In fact, I got called to tell that they were investigating a human being and they should know something by the next - but that like 4 days ago.  I called them back and they acknowledged that they still lacked any point on where the package is.

    I also called Dell and spoke with someone of my order status.  They said that they could see that the laptop was late and said that they would just send me another laptop and then backcharge FedEx for the laptop lost or stolen.  It sounded like they were going to process this request on this night.  But so far I have not seen what whether... no phone call, return, no email indicating me the new order is on the way... nothing.

    I'm about to call Discover to dispute the charge on my credit card to Dell.

    I really need to get this resolved and would like to have someone with me Dell management and let me know what happens.

    It's really not Dell fault that FedEx lost the laptop, but I do not think that Dell is not an adequate job is resumed.

    I am not a happy customer now... Please help me get this fixed Dell...

    After that several exchanges by email, Dell finally sent me a replacement laptop.

    I ordered an E6440 Latitude and what they replaced by was a Mobile Precision M3800. Completely different laptops.

    I guess because I bought this Dell decision-making, they couldn't just send me what I ordered originally.

    While M3800 is a really nice laptop, it lacks a CDROM which was an element in the Latitude I ordered originally.

    Interesting that nobody has tried to contact me to ask if M3800 would be an acceptable substitute to the Latitude of E6640 I ordered originally.  They just picked it up and sent it.  Again, not the best way of doing this.

    I sent another email to ask about the missing CDROM.  Will need to see what they are doing in this regard.

    Personally, a MUCH simpler solution to all that would have been for Dell to credit my account for the lost original portable and comes to serve me a really nice Promo Code discount that I could use to buy another laptop on Dell decision.  I would have gotten exactly what I wanted to like this and it could have been resolved and MUCH faster overwith.

  • Gamepad Xbox 360 plugged into USB with "Play and Charge Kit" does not work

    Hello, I have Windows 7 as OS, and I'm having some problems with my Xbox 360 controllers. When I bought the game and load to my xbox 360 controller kit, I heard that it was possible to connect to you pc to play with games for windows live. So, I started looking for drivers, and I found them in the official site of microsoft hardware. I installed it, and then I restarted my PC, I plugged it into the USB port, WIndows recognizes the material. I thought it was very good. But, even if the hadrware has been noted, it doest work. Then I discovered that 'Xbox 360 accessories 1.2' does ' t detects hardware, and it is not recognized as a game, but as a generic Hadrware material.  at this point I have gived up! I surfed the net, trying to find somethig or somemone can help me, but it was useless. Now, I hope that you will be able to solve my problem!

    PS: I already tried to change the controller, to change USB port, to change the cable, to uninstall and repeat the installation of the driver...

    I hope that I was clear and sorry for my bad English!

    Hello TheRick.

    Unfortunately, this won't work.  The Play and Charge kit connects only up to the actual battery.  Still, the controller connects more wireless.

    You would need a wired Xbox 360 controller or Xbox 360 Wireless Gaming receiver that connects to your wireless controller existing.

    Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • printers and internal hard drive

    We have a Dell all-in-one (AIO) printer 962 and we wish to dispose of it.   Until we do that, however, we would like to ensure you that don't contain any of our private information.  We wondered if this printer was an internal hard drive.  If so, where is it and how can you remove the data and information about this?

    Thanks in advance for your help.

    Hello

    Welcome to the community

    This printer has no internal hard drive or a storage inside to store information. Thank you for your message.

    Kind regards

  • Required blackBerry Smartphone help eliminate the international code attach when I try to make calls from the phone book

    I just bought my first Blackberry.  Everything is great except... There was an international code pre-programmed in the phone, because when I try to call in the phone book, or return a call - do not do so by dialing the number from the keyboard) it attaches one + 86 to the front of the phone number.  How can HELP - I get rid of this?  Thanks for any help anyone can give me.

    Try this:

    go to call log > Menu > Options > SmartDialing > then change the country code + 1 for the USA.

  • After you recreate a link to my internal connection APPS error

    Hello

    Is it someone knows about it

    After I've reprinted under our ERP Production adadmin
    then I restart applications
    I tried to connect, but it takes time to show the connection
    supposed to be the login, but it was an internal error

    then I tried to start the receiver

    and here is the result

    LSNRCTL > start PROD
    From /u/oracle/PROD/apps/tech_st/10.1.2/bin/tnslsnr: Please wait...

    TNSLSNR for Linux: Version 10.1.0.5.0 - Production
    System settings file is /u/oracle/PROD/inst/apps/PROD_tailinapps/ora/10.1.2/network/admin/listener.ora
    Log messages written to /u/oracle/PROD/apps/tech_st/10.1.2/network/log/prod.log
    AMT-01151: lack of name of the listener, PROD, listener. ORA

    Listening port could start. See the above error messages...

    LSNRCTL >

    Help, please


    Thank you

    cheesewizz wrote:
    Hi Hussein

    I think that I made a mistake
    Im running the listener in level APPS, it should be on DB

    I can now able to connect to our ERP

    Thank you

    In this case, log in as the user oracle and source, the env database file can deliver "lsnrctl" followed by "start PROD".

    Thank you
    Hussein

  • Is it possible to burn a DVD-DL with my Satellite M30X?

    Hello!!!
    First forgive me my English because I am from the Spain and I'm not perfect in English...
    I M 30 X a I was looking for a way to burn double layer dvd (DVD9) with it without finding anything. The problem is that when I try to write one with NERO (it crashes with any burning software and I use the latest versions) it stops and says that there is an internal error target in the DVD recorder (the CARPET * a uj 831 s). And it's the only type of dvd itdoes not write because it works perfectly with the dvd - r and dvd + r
    I don't know what to do because I searched a lot and nobody has succeeded to ive me a valid solution. I have also written to support post located on this page, one they have not responded me yet.
    Can someone tell me how to burn DVD DL in this computer? Because it is not normal to buy a computer which is told which allows to burn dl DVDs and once you have it you notice it'simpossible for this.

    Please answer me!

    Thank you!!!

    Hello

    Are you sure that this player supports double layer DVD?
    As far as I know this device was shipped with a super multi drive (single layer) and
    It supports CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD-RAM.

    In this case, I propose to consult the user manual. You will find the CD/DVD media supported

    Good bye

  • HP artist edition theme-HP Pavilion DV6Z - 1100SE

    First of all - i guess well never again HP, if you out of warranty - these guys are unnecessary and just pay, something has already been paid for. So here's my problem-i got HP DV6Z-1100SE artist edition laptop, blue-white custom and high body. It was shipped with Windows Vista on it and later has been upgraded to Windows 7 came laptop with Stardock MyColors with HP artist edition 2 theme for her. Months ago my HARD drive died, brick full. Not a problem - I looked up the back, so I bought a new HARD drive and reinstalled windows 7. Well then I got barely - hp.com is my model of laptop, nothing. So executed 'autodetect' - it will recognize it as usual portable base DV6Z-1100. Although drivers are the same, so I got this operational part. But then I tried to make my Windows 7 look like it used to be-with the HP artist edition 2 Theme.And here the problem-i can't find it, I can't download it, found older 2-3 markets here on "back-up your theme. Then, I used my Googling advanced skills and got the software back-Stardock MyColors app. I was able to find 3 or 4 themes such as "Edition Vivienne mAh" and "wrong Boontje edition", but I want MY BLUE AND WHITE HP THEME! " Well-i guess, it's time to call HP, right? * beep *-wrong answer. The guy does not even what I'm talking about and tried to sell me extended support program and to charge me $ 99 to do this, if I don't want to pay to go to HP.com and download it. Loop... I've already paid for this computer portable limited edition, I paid extra for internal and external ART! So, if anyone can point me to HP software package with Stardock my colors HP Artist Edition 2, or if there is an owner of the laptop can even email - me the theme file. Any help is apperciated. I hope I can get it, otherwise that this laptop will be the last HP product I got. Same Dell which is known for terrible customer serivce can maintain at least their website with good product downloads. Thank you very much in advance, I really hope that I'll bring back the original look of my laptop.

    This agreement of the whole of the community is as useless as the HP technical support. I got the theme recovered from the former to the top (lucky me). HP never more. Laptop goes on sale, do not want to take care of this thing once again. If someone looking for theme-leave your e-mail, I'll send it to you.

  • Satellite L40 - F14 with Windows XP - seeing WiFi is disabled

    Hello!

    I have satellite L40 - F14 with Windows XP Home SP2 - and everything works fine.
    But there is a little problem with indicator LED WiFi - WiFi works normally.
    connection with router and... This LED turns OFF. It is not big problem,
    but I like, if everything works well :)

    Now I have the latest version of the driver installed (from 29.11.2007)---> http://support.toshiba-tro.de/tedd-files2/0/drvpack-en-20071119132412.zip.

    Can you give me link to correct functioning driver WiFi for Satellite L40 - F14 or answer where is the problem?

    Help me please :)

    st_man

    *_@st_man1_*
    Have you checked if the WLan switch on the side of the laptop is on? This switch activates and deactivates the WLan led. If this is not enough, I guess that there is a hardware problem. Perhaps some loose contacts, for example.
    This can be corrected with any software update, I think that the technician should take a look in the notebook and should check this

    _*@chris4o*_
    First of all it s very strange that your laptop has not delivered with any Windows operating system! Each new Toshiba notebook was shipped with the Windows operating system and the image of Toshiba should be already preinstalled.
    In addition, you should find the Toshiba Recovery CD in the package. This CD contains all the drivers Toshiba, tools, Windows OS and additional software!

    With regard to the pixel dead;
    Usually the internal laptop display can be replaced if a large amount of dead pixels would be displayed on the screen. There is an exactly information about replacing the screen.

    Please check this:
    http://support.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

    In any case, I recommend you really clarify this two issues from your laptop dealer! The laptop must have the OS!

Maybe you are looking for