KODAK AiO ESP3 printer is detected but does not print

Similar Questions

• An Application incompatible mobile partners and detected but does not always

  Acknowledge troubleshooting see the report are fix the incompatible program-Mobile Partner (broadband pilot-Huawei E1552) but still does not resolve the application respective icon still showed her suffer from inconsistent failure. Please help. TQVM

  Hello

  1. what operating system do you use?

  2. what exactly do you mean by ' Application Incompatible mobile partners and detected but does not always '?

  3. What is the exact problem you are facing the computer?

  Provide more information on the issue to you help again.

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• X 1-charger (Kensington Absolutepower) detected but does not load

  Recently I bought a Kensington Absolutepower (http://www.kensington.com/kensington/en/gb/s/1717/absolute-power.aspx) as a replacement for the charger standard 65w which was delivered with my X 1.

  It seems to be compatible with other laptops Lenovo model X, and Lenovo are listed as a mark of support, but when it is plugged the X 1 does not load. The charger is recognized, (the familiar sound of the beep and the green light next to the laptop input lights upward when it is plugged) but does not not the battery. The machine is designed for the correct voltage setting, and all the Lenovo firmware is up to date. Someone at - it any suggestions or experience with this combination of product before I return the charger?

  Hello

  According to the following link: http://www.kensington.com/kensington/en/gb/p/1440/K38080EU/absolutepower%e2%84%a2-laptop-phone-table... the X 1 model is not compatible with the absolute Kennsington power adapter.

  Here is a list of the compatible models of the X series:

  X100e 3508 of X100e-2876 (L) (L) X 200 (L) X 200 Tablet X200s (L) (L) X200s (L) X 60 (L) X 60 compressed X60s (L) (L) X 61 (L) X 61 Tablet X61s (L) (L) X 201 (L) X 201 Tablet X201s (L) (L) X 300 (L) X 301 (L) X 301 (L)

• gamepad Xbox 360 detected but does not work on windows PC 8.1

  I recently got the game pack and usb support, and I tried to connect it to my laptop. I am sure that it is in a USB 2.0 port, and it is detected (depending on the devices and printers) at 90%. However, each guide I find tells me to open 'the game controller settings' in the menu devices and printers and test the device, or open Joy.cpl. There is no option 'game controller settings' for me, and joy.cpl doesn't detect anything. I tried all the drivers I could find and had to restart at least 10 times trying to follow all the guides, but it won't work.

  I also downloaded the software that is supposed to come with the regulator in line, and a guide that I used, I would just download the version of windows 7 and open it in compatibility mode, I did, but that didn't help. He gave me the software for the controller, and I have the small window that shows how the controllers are connected. This window, however, does not detect the controller, saying he has no connection.

  It's very frustrating, and any help is appreciated.

  Thank you

  Hi Benjamin,

  I understand your frustration, but rest assured that I am here to help you with the question.

  The Play and Charge kit connects only up to the actual battery.  The controller connects wireless. You need an Xbox 360 Wireless Gaming receiver that connects to your wireless controller existing.

  Please meet us for more details so that we can help you.

• microphone is detected but does not sound pick up.

  I am using a microphone with my computer.  In the dialog control sound control panel it says microphone "works".  It is not muted and the volume is completely.  However, when I talk into it, it does not record that there is no sound input and bars do not move up and down as they should.  So of course, I can't save anything, because there is no 'hear' me.

  I've been Googling this all day and I feel very embarrassed that I can't understand it :(

  It turns out that, it seems that it was the microphone itself that was the problem.  I went and took my brother to another mic and it works very well.  Ugh!  Sorry to have wasted your time with my STUPIDITY.  Thanks for the suggestions, I ended up updating my drivers anyway, so I guess that some good came out of it ;)

• Network printer is detected but does not install.

  I just bought a netbook Windows 7 Starter (32 bit) running, and I try to install my printer HP OfficeJet L7555 using the download of OJProL7X00_Full_14 (wired) network.

  My printer is detected on my network, and everything that looks like it installs fine and then he gives me a big red X and tell me that it can not install the printer at the moment, but it can put an icon 'Add a device' on my desk. I have done this and have since tried to use it with no luck.

  I disabled my firewall and antivirus but still no luck.

  Can someone help me?

  Fixed.  What a pain after several months.  After reflection, why I had two computers that work with wireless and two did not, the only difference I could think between them is the two who did not had fresh reinstall of Windows 7 x 64 while the other two have been underway for more than a year.  Made me think of one of the updates, possibly Win 7 SP1 may be the culprit.

  So I reinstalled Windows once again on one of the two who stopped at 50% of the HP 7780 install.  This time, however, I loaded only base Win 7 x 64 and different chipset, audio, video, LAN etc drivers.  I've left no WIndows updates occur.  Then I installed the last Full Version 14 software 7780.  Worked like a champ - found my wireless printer (which he always did) and then continued installation beyond 50% up to the end.  Once done, I'm done load all the updates for WIndows and other software like Office, Nero, games, etc.  Still works.  He worked on the other computer problem as well.

  Load the HP software before you let Windows updates occur.

  Good luck!

• External hard drive detects but does not open without formatting

  I can't open my external hard drive. In computer science, it shows just K of disk space, but there is no reading of storage. It says 0 bytes of free space and used as 0 bytes space as it will not be open until I have format. Any kind of help, please let me know. Its a backup disk that have been most hard, though don't know if its of any help.

  Hi Deborah,

   

  I imagine the inconvenience that you are experiencing right now. I will help you on that.

  Formatting a disk means configuring the disk with a file system so that Windows can store information in there. Usually, when you install a new hard disk on your computer, it must be formatted with a file system, such as NTFS, Windows can store files that it contains.

   

  Please answer the following questions so that we can better help you.

  1 - is the specific problems of a hard drive?

  2. is it the problem persists when you use different USB ports on the same computer? If 'yes' then tick the question in another computer and let know us the results.

  3. don't you make changes to the computer before the show?

  I suggest to follow the steps below and check. Please move to the next, if only the problem persists after completing each.
   
  Method 1
  Convenience store equipment and peripheral performance such that it can solve some common problems associated with the hardware attached to the computer. Follow the steps from the link below to be executed, which.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2
  Run Windows updates and check if you have any availability for USB drivers. You can check the link below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
   
  Method 3
  Access the manufacturer's Web site and download the USB, the BIOS and drivers from the chipset and check the issue.
   
  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved.
  Changes to settings are at your own risk.
   
  I hope this helps. Please write to us if you need further assistance.

• Re: Deskjet 3070 - replaced the cartridges but does not now print!

  I have the same problem with my printer Officejet 6700 Premium. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including Diagnostics pages. The printer is a little older a year is not under warranty. Any help would be greatly appreciated!

  Hello twoshirts,

  I saw your other threads, and I understand that you have completed all the procedures listed here troubleshooting: printer does not print black ink or color of ink or prints blank Pages without success.

  I would like you to follow the steps below:

  1. reset of the printer, please make sure that you plug the printer directly into the wall, do not use a surge protector or power bar, they can cause the printer is in an error state and lose features of base over time.

  2 a 'cartridge problem', "Ink cartridge failed" or not "compatible ink cartridges" Error Message appears on the all-in-one, I know you did the cleaning steps, but, if you please, reinstall the cartridges and perform all THE steps listed

  3. now go ahead and run HP print and Scan Doctor- it has been designed to provide users with HP and features troubleshooting fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  I understand that you are not able to print diagnostics from the menu on the front panel as well, but want to see if the PSDR detects all conflicts in the software or drivers.

  Please let me know the results.

  Thank you

• HP Laserjet 1018: Printer light blinks 15 times but does not print

  I have 2 printers, my work horse HP laser jet and a Brother Multi printer/scanner/fax etc. Both printers work correctly when connected (usb to LJ1018 connection) or wireless (Brother MFC) to my notebook running windows 7 lite.

  My desktop HP compaq core 2 duo machine is connected to two printers with the help of a brother network cable and a usb cable for the LJ1018 but I decided to connect the brother wireless to my network, because it allowed me to use my netbook without having to plug in a usb or network cable. I also created my office to connect wireless to the brother and it works fine, but now I find that I can not use the LJ1018 that I think only has a usb cable connection. Although the computer says the printer is connected it is flashing the light several times - about 15 but does not print anything. I tried to reinstall the USB driver but this makes no difference. One thought I have is that Windows XP cannot deal with a wireless connection, but also a connection usb, if yes can I have go back to wired connections?

  Hi @petec48,

  Personally, if it is not broken, do not fix.

• HP 5400 printer light blinks, but does not print

  HP 5400 printer light blinks, but does not print

  Hello theguttu,

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Best regards

  Matthew_Ha

• HP Officejet 6500 a E710n-z: HP 6500 printer scanner prints but does not scan

  Since my OS has been upgraded to Windows 8.1 the printer scanner prints (very slowly) but does not scan!

  I tried HP Print and Scan doctor, he worked once (clumsily) but not since. I tried Windows ' whatener it is called "but nothing.  It was working perfectly since I the printer scanner.   Now I don't NOTHING DO let's me scan.  and the fix message tells me that my WPA security password is not quite valid (nothing has changed here!)

  I checked the internet, it seems that a lot of people have the same problem.  I don't know if anyone has fixed it.  The so-called solutions are not very easy to follow!  Just as they do not work.

  Thank you X-23, I'll ty that when I have a little more time.

  Dziadz

• printer is offline but but does not print completely baffled!

  Completely stumped with this. I have a brother MFP990 all in a station. It is connected wireless to my network. I have a laptop computer connected wireless network and it prints fine. My desktop computer, but does not print even if it seems to recognize that it is there. The printer is communicating with my computer and let me know the ink level is low. My scanner works perfectly and scans the computer, no problem. But whenever I try to print, the computer tells me that the printer is offline. I tried to disable Norton firewall, no difference. I tried to uninstall the software, and oddly enough, during the uninstall process, an exceptional print request was printed! When I reinstalled, same problem. Any ideas?

  Hi, Frank,.

  Open the event viewer > application log

  After return that error messages/event ID is related to the question of the printer

  Start > right click on computer

  Select manage

  Select event viewer > application log

  In the meantime, try the following:

  Start > type Services.msc
   
  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer
   
  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents
   
  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager
   
  Click on the + sign next to Ieeee... compatible printer
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall
   
  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet
   
  Wait 5 minutes
   
  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler
   
  Go to the manufacturer's website and search for updated drivers

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• printer says 'ready', but does not print.

  After changing the ink cart, HP OfficeJet 4500 wireless printer, it says ready, but does not print. I have to align the cart as he said, it print a test page, all in black and white and color (maybe that's the problem, but I have JUST NOW put a nude color cart in). WHATS WRONG PRINTER W / THIS.

  Hello

  You can make a color copy?

  Are receive you error messages about the color cartridge?

• Software for printer C410 starts but does not load.

  Software for printer C410 starts but does not load.  Using Windows 7 Home Premium SP1 on a Pavilion HPE-140f. Click on install and the process starts, goes in all the scans and the two notations. When I click on load it just goes dead and will not charge.

  Try to run the installation once more

  Once to reach the license not agree, click on the link 2 (use of connection Internet

  Make sure that both options are defined as no, thank you, approve and proceed with the installation

  You see no progress

  If the same appears, please specify whar you are which means by "going dead" - is there a specific error message?

  Specify as detailed as possible, a screenshot can help to understand better as well.