Satellite M30-S309: cannot change on the local network adapter device

Similar Questions

• cannot connect to the local network using windows 7

  Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

  Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

  Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel connection to the Local network adapter * 9:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. :

  State media: media disconnected

  The connection-specific DNS suffix. :

  TEREDO TUNNELING Pseudo-Interface tunnel adapter:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. our field: *

  State media: media disconnected

  The connection-specific DNS suffix. :

  I tried to turn off the firewall and connect without success

  My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

  Any help would be appreciated

  Thank you

  Well Yes! So it was an older version of the bonjour service... thank you Adobe.

  You can find the latest version here:

  http://support.Apple.com/kb/DL999

• Cannot turn off the Local network

  Message icon and get XP Pro SP3 right click LAN "it is not possible to disable the connection at this time. The connection may be using one or more protocols that do not support plug-and-play, or it may have been initiated by another user or the system account.

  I am the only user and administrator.

  When I di ipconfig/all, I get this:

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Administrateur > ipconfig/all

  Windows IP configuration

  Name of the host...: laptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: domain_not_set.invalid
  domain_not_set. Invalid

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : domain_not_set.invalid
  ... Description: Intel(r) PRO/100 VE Network Connection
  Physical address.... : 00-0F-1F-A1-0C-53
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.67
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 192.168.1.1.
  184.16.4.22
  Lease obtained...: Tuesday, October 12, 2010 10:18
  End of the lease...: Wednesday, October 13, 2010 10:18

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. : domain_not_set.invalid
  ... Description: Dell Wireless 1350 WLAN Mini-PCI Card
  Physical address.... : 00-90-96-A7-2C-08
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.68
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 192.168.1.1.
  184.16.4.22
  Lease obtained...: Tuesday, October 12, 2010 10:18:29
  End of the lease...: Wednesday, October 13, 2010 10:18:29

  Hi cciaffone,

  If you can't turn off your connection to the local network by going to the network connections

  Please try to disable it via Device Manager

  go to RUN and type the following command in the RUN: DEVMGMT. MSC

  under network card try turning off your ethernet card.

  hope that helps

• the local network adapter is disabled after reboot

  my internet connection status displays a caution symbol every time at startup and I can't access the internet until I have turn off the connection and then use troubleshooting which is good, but it doesn't tell me how to solve this problem permanently how it stop be disabled whenever I restart my pc?

  Hello
   
  1. don't you make changes before the show?
   
  We recommend that you follow these steps and check the result.
  Step 1: Disable network card power management settings.
  1. click on start, type devmgmt.msc and press to enter.
  2. from the list of objects, expand network adapters.
  3. double-click on the element sub under network adapters.
  4. click on the power management tab.
  5. clear all the options on the power management tab.
  6 apply the settings, and then restart the computer to check the difference.

  NOTE: Make sure that you have installed the latest network adapter driver.
   
  Visit this link for more information on "Troubleshooting network adapter problems":
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Satellite Pro A200 cannot connect to the wireless network

  Hello

  I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

  I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
  Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

  Any ideas?
  the FN/F8 will work?
  Help! Please, I beg you!

  Have you tried using System Restore and restore the operating system on time earlier?
  Maybe this will remove the update installed, and you can again use the WLAN.

  Check it out.

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• Post updated to SP3 and IE 8, some systems cannot connect to the local network

  A number of machines on my LAN that have recently been fixed to the last State (installed XP SP3, IE 8 and all dry and updated crit) seemed to lose all capacity for networking.

  Device Manager displays all problems, systems were released in market, on a a system restore was performed at a week back but the problem persists. They will not collect a DHCP, our work with a fixed IP address.

  They can only be connected with the local administrator account - domain accounts will not work

  The event log is giving nothing away - very curious!

  I'll try to include measures:

  1 netsh winsock reset (reboot)

  2 netsh int ip reset c:\resetlog.txt (reboot) http://support.microsoft.com/kb/299357/

  3 Uninstall SP3

  I would avoid if possible reconstruction so I welcme possible any other suggestions as to the cause or corrections

  Turned out to be a problem with the site switch - switch reboot solved the problem

• Satellite L350 does not connect to the internet, network adapter yellow exclamation

  Trying to help my Nan with his laptop...
  Model is Satellite L350-170

  Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

  She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

  All the drivers can be downloaded from the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
  Then, you will get the list of drivers.

  If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

  You asked how to remove the network card?
  Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
  Click the single LED adapter, and then press or click on uninstall button driver

• Satellite M30-404: cannot change display brightness and THCI.dll is missing

  Hello!

  1. a few days I did a reinstall of XP. Now, I can not change the brightness of the screen. FN + F6/F7 does not work.

  2. when I start the computer, a message appears > an application cannot start because THCI.dll be found. A new installation of THCI.dll can help. But I don't know what is THCI.dll!

  My English is not perfect, but I hope you know what I'm talking about and can someone help me.

  Thank you very much

  Concerning

  Tobias H.

  Hi Tobias,.

  THCI.dll is the code for the application of the function of Toshiba key that is used on your laptop to control the selection of Fn key. You will need to install the utility Toshiba control of your tools and Utilities CD (or download from the Toshiba Download Page).

  Kind regards

• Satellite M30-S309: impossible to install the driver of modem for Win XP SP2

  Hi all
  I installed WinXP SP2 and after that, I can not install my modem driver?

  What is the problem?
  Is there a new driver for WinXP SP2

  Best regards

  Hello

  Do you have an error message or strange notification messages?
  It would be useful to know this.

  Bu the way: Please take a look at the driver Toshiba Europe page. There you should find a PDF of information update Microsoft Windows XP SP2. Some applications need to be updated after installation of SP2.

  I think it should help!

• Satellite Pro M70: No connection to the local network after removing the cable

  I have some problems of Mayor. The first time that I go on the internet - no problem. But if I get out my internet cable and plug it again it dosen't work! ??? I get the same IP, subnet and gateway. Everything seems fine. But the connection does not work until I restart the computer.
  Help, please

  Hello

  What do you mean with no link? If you have the same IP, subnet and gateway then the connection should be available.
  Perhaps mean you that IE cannot open Web sites.
  Anyway, if I have problems with my LAN connection I right click on the LAN icon in the taskbar and then I chose the option repair.
  The IP, the subnet and the gateway will be updated and the connection works again.

  Check also.

• Satellite M30-S309 - where can I get the drivers?

  someone please help me?

  I need the driver for Toshiba Satellite M30-S309 (PSM30U-0QKJ18) and Windows XP. I had been searche since last week, but I can't find it.

  Please something dp

  Hello!

  I m wondering you didn t find the drivers because you can get it on the Toshiba site:
  http://www.CSD.Toshiba.com > download

  Don forged t, click on view all designs, where you choose the category.

  Good bye

• No connection to the local network, cannot connect - Satellite M35-S163

  I think I've tried about 10 different drivers, but I can't ALWAYS connect to the local network.

  He will not get an IP address.

  Other computers have no problem and are connected through the router, but it just won't connect.

  DHCP in router, IP config says the get IP address... No firewall issue... Any new installation of XP SP2

  Any ideas?

  OH, and regarding this... discovered Ethernet controller driver is on one of the Wireless drivers... z

  Hello

  I m bit confused.
  The LAN card is recognized correctly in the Device Manager?
  Check under network adapters and if there is NO yellow exclamation point.

  If the network card is recognized correctly, then you should check the LAN parameters-> * Protocol of TCP/IP.

  IP address, getway must be set to assign automatically.

  Check it!

• Satellite M30-S309 - certain proportions on external monitor not right

  Hello world.

  I have a Satellite M30-S309 that I just started to use it with an external monitor: a 191EW9 of Philips, which has a maximum resolution of 1368 x 768. The built-in monitor is 16 "; the new external monitor is 18.5 ".
  The computer has the driver for the new monitor, but with a few photos of the proportions are obviously not right.

  Anyone know of any way to solve this problem? Or it's an old computer like this all simply not up to handle this type of monitor?

  A solution would be much appreciated.

  Hello

  Can you please explain what you mean with certain proportions are not suitable?
  You can choose the native screen resolution of the external display or use another resolution of the screen?

  To me that sounds like this, you use a wrong setting. On the screen you can change the width, height and to this day. You should check these options.

  Welcome them

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.