Labels cutting MP3 Sansa Clip +.

Similar Questions

• Synchronization of my Sansa Clip using Windows Media - _

  I have great difficulty to sync my mp3 Sansa Clip with Windows Media Player. I am trying to sync the CD College courses and it synchronizes the lessons out of use. All solutions?

  Hello

  Do you receive an error message?

  Your MP3 player is recognized as a removable disk in Windows Explorer?

  Have you tried to connect MP3 player to another USB port?

  Mike 2.0 seems to have found the solution to this problem, go through the link below and see if you can solve your problem by its method.

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/669061b6-053a-483e-9AF1-b5bbacebd203

   

  Set up a device to sync in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  Windows Media Player sync: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Let us know if this helps

  Concerning
  Anthony.

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• SanDisk Sansa Clip + 4 GB MP3 player with FM Radio

  Hello-

  My new sansa clip + out of the box and I'm not able to do Radio FM works.  Battery is charged.  All I get on screen is a set of headphones and the 'music '.  I do not expect to play music because I have not yet loaded, but I expect to be able to get FM radio but can't seem to get there.  Any suggestions on how I have to happen?  Thank you.

  Please note that I do not see a menu of items to select from the MP3 player.  I do not see a "lock" or "unlock".

  My computer recognizes the drive as a new piece of hardware.

  The reader does not recognize the software on the CD when I put the CD in the computer.

  The player does not allow me to make the software what I t hink is the "root directory" for the player.  I guess tha the directory "root" is the "Sansa Clip + 4 GB" or the "internal memory".  It allows me to copy in one of these.   Appears as:

  + The Sansa Clip + 4 GB

  -Internal memory

  + Albums

  + Audio books

  + Music

  + Playlists

  + Podcasts

  + Records

  + Service

  My D drive that reads the CD has these files it contains:

  Autorun.inf and sansa - install .exe and one other file that reads:

  fscommand with these files it contains: dloadrhap.exe, dloadrhap.txt, proxy.bat, proxy.exe

  If I do not have need of these, please let me know.  I don't want to stuff more then I need to run the player.

  I'm assuming that I need only the files autorun.inf and the sansa - install .exe.

  I do not understand what is Rhapsody or why I need.

  Thank you.

  Bonnie

  Now, don't laugh at this suggestion, but: when you get the player, there is a transparent plastic sticker that was placed on the screen of the player, which has a screen simulation showing the items that describe you see on your screen - have - you, you take off the sticker? (It generally is a small tab on the right side of the tile to help with that.) Once you do this, the player I hope will begin to operate as expected. On the CD, you don't need at all! The CD is required to use the separate music Rhapsody and optional subscription service (for which you pay every month, after a free trial, usually). If you do not want the service, go to the CD. Finally, you should check and see if your drive is the latest firmware - look under settings to the player and to compare this version number firmware recent listed in the upgrade thread Firmnware sticky at the top of this forum. If the thread here has a more recent version of firrmware, recommended that you upgrade to it-, it is very easy to do. I hope this helps!

• SanDisk sansa clip mp3 player +.

  I just bought a sansa clip mp3 player + and it seems that the language is Arabic, or something like that.

  one can tell me how to change to English because I can't read the screen says

  Thank you

  1. Select settings (image of an equalizer).

  2. Select the last item in the list.

  3. 4th option should be the language if I'm not mistaken

• How can I me floor device works with my sansa clip zip 4 GB mp3 player?

  Device stage seems to be a nice software to sync music from computer to my new mp3 player, but it doesn't seem to be in my new Windows 7 software? What should I download it?

  Or what I need to download (also) on the Sansa Clip Zip?

  Help please..!

  Thank you

  / Leif

  Read here.

  See you soon,.

  Jerry

• Organize the Audiobook on Sansa Clip +.

  I'm relatively new to the Sansa Clip. I want to put an audio book on which has a set of 11 disks. I created a title on the drive under audio books. Now I want the title create 11, disk1, disk2, etc. subfolders, to copy the torn in each folder of s to do 11 playlists under the title. That doesn't seem to work. Is this not possible.

  Then I thought about being smart and merged all tore up the files from one disk to do a big mp3 fle (60 + MB) and do this 11 times and copy them under the title and create a playlist. The player doesn't and hung. What gives? Any help wil be appreciated.

  Well, this is what I discovered. Each record indicates that a separate under audio books book. So I changed the label of the album of each disc to the Heading1, Title2 etc and it works. Thank you all for your help. Very much appreciated.

• Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  Hi all

  Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  I need software to convert mp3 to flac, please guide me because I want to test flac on sansa clip

  Thank you

  He plays very well FLAC.  There is probably a problem with your files.  They are not coded correctly, or you use the ID3 tags.  The Clip only supports normal Vobis comment tags to FLAC / Ogg.  Mp3Tag should be able to fix your labels if that's the problem.

  In addition, there is no reason to convert MP3 to FLAC.  It will sound the same as the MP3, but you will have much larger files.  If you want to get the advantage of FLAC (or any lossless format) you will need to rerip your CDs.

• Power outage Sansa Clip

  Hello

  I have a 2 GB Sansa Clip I bought about 4-5 years ago and have been very happy with it.

  He runs the version of the 01.01.30A software.

  However, recently and for no apparent reason suffering from power cuts.

  It would just turn off, no matter how much battery there left, how long it has been running or what he does. And when we turn on (which is sometimes hard to do) he can't remember the last thing he was playing.

  After further tests it seems to turn off when put under different angles, almost as if there is a piece on the inside that is open/close the connection. When shaking a slight ratteling inside there, but I can't be certain that's not making noise power switch.

  Of course, this looks like a hardware problem.

  So, how can I open it and fix it? Is there a diagram somewhere I can look at?

  Thank you

  Max

  Well, I opened it and looked around in there.

  True, the battery had detached from its adhesive strips and pulled the loose battery negative cable.

  Gently, I took out the battery and was able to resolder the wire and test that it works before you all shut up.

  My double-sided adhesive foam Strip seemed to be too thick, so I used a drop of silicone glue to prevent the battery from moving around.

  All together again once, case snapped back and forth between them well.

  A little notation around the seam is a small price to pay for a media player that fully operational once again.

  Thanks for all your suggestions!

• Headphone Jack does not fit into my new Sansa Clip +.

  Hello

  I just bought a new Sansa Clip + so I could listen to my songs while he's on vacation, but when I put in my profile 3.5 headphone jack into the hole on the side of the mp3 player, it will not thoroughly and grave if I don't hold him properly. That is how a Sansa Clip + is? because I found it very boring.

  I hope someone can answer quickly because I'll be on vacation in a week about. And sorry for my English because it is not my mother tongue.

  When the player is again taking is very tight and it takes a little force to get the plug completely.

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.

• Play OGG tracks, freezes my Sansa Clip Zip

  Hello

  I tried that twice add files ogg to my card 32 Gb microSDHC SanDisk Ultra that I use with my Sansa Clip Zip, and the two times my player froze when he tried to play.

  I simply copy/paste ogg files, so I did not use any software to manage the upload. When I download mp3, I usually use the Winamp player.

  Ogg files are soundtrack of games shipped with my purchase on www.gog.com.

  I do something wrong when I download ogg files? Music plays without problem in VLC media player.

  Thank you.

  The Ogg decoder in the sandisk firmware is pretty buggy and really inefficient power. I talked to them years sending a few corrections (they use the standard decoder open source, just a version older and without much optimization), but who worked all the time, they stopped really about adding new things never happened. If you use multiple Ogg files, you should probably watch using Rockbox. I think the battery life is 2 or 3 times longer due to optimizations, and compatibility is much better.

• Sansa clip plus and itunes - how to transfer files

  I'm really ignorant, but I would be very grateful for the help.   I did research on this topic here but do not understand the answers...

  Basically, I use itunes on Windows XP.  I just boughts liked a Sansa clip.

  I don't know even what kind of files I have in itunes - they are mostly ripped a CD. I guess they were mp3s but looking at recent postings here it looks like they may be something else (ACC file extensions?).   Anyway, I was fiddling around in itunes but have not been able to verify what are the types of files ('cos I'm ignoring it!)

  Earlier today I just copied some of the songs in itunes, go to Windows Explorer and paste in the section music to the Sansa Clip file.   They played very well...

  Then I went and deleted these files on the Sansa Clip Plus, because they were just an experiment.

  Then I went back to itunes and copied the files over.   This time, when I went to paste the files in Sansa Clip Plus in Windows Explorer, I found the option to paste is grayed out.

  I'm stuck and would be incredibly grateful for the help.   As you can from it of the mess that the above, any guidance I get has to be pretty basic.

  the easiest way is just to look at the files in windows Explorer. go to documents, then music. the music folder to itunes folder. That's where itunes stores all the files. you need to configure the computer to display file extensions for known file types. Find your MP3 files and copy them from windows Explorer, then glue them to the clamp.

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• Work of the trouble on Sansa Clip Zip

  Hi - I have problems with the work on my Sansa Clip Zip.  Work does not show for each song.  For songs ripped in the Zune software will show the work.  However, for the ripped songs in iTunes does not show the work.  I tried to put .jpg files in the folders with the songs, make sure they are of size less than 100 KB and even tried to resize one at 200 x 200 pixels (though the size was too large of pizels overall size was fine).  Any ideas?  Thank you.

  Use 'album art.jpg' (without the quotes and with space, not a line of underscore) or "folder.jpg" (again, without the quotes).

  I'm not 100% sure, but I think .m4a files Apple 'protected '. The Zip will not play them. They would need to be converted to a type of file supported as .aac (Apple DRM-free format) or .mp3 (universal format).

  You can use MP3Tag above (free to download) software to incorporate images of cover art in the "extended" part tag. Note that you need to do this for each (long) file rather than the image one (album art.jpg) for all files in the folder even the opposite effect.