Organize the Audiobook on Sansa Clip +.

Similar Questions

• The Firmware Update (Sansa clip 2 GB) support

  While he was trying to transfer my cell phone to my Sansa Clip audiobook, I get the following error during the file transfer:

  ""It is not possible to obtain the certificate of the device. " Contact the device manufacturer for a firmware update or other measures to address this problem. » » »

  When I try to down load the latest Sansa firmware using the "Sansa Updater 1.2 ' version, I get the following error:"

  «"" The following error has occurred: cannot download the selected files.»»» Please try again later. » » »

  I currently wear farm: 1.01.11 on my Sansa Clip (2.0 GB)

  Can offer you any advice on the correction of such? A firmware update will solve the problem of certificate? Any help would be appreciated...

  DLR

  There is a message at the top of this map with instructions for a manual update. use that to update the firmware, and then in the settings menu use the format command. Try once's done it charging books.

• Work of the trouble on Sansa Clip Zip

  Hi - I have problems with the work on my Sansa Clip Zip.  Work does not show for each song.  For songs ripped in the Zune software will show the work.  However, for the ripped songs in iTunes does not show the work.  I tried to put .jpg files in the folders with the songs, make sure they are of size less than 100 KB and even tried to resize one at 200 x 200 pixels (though the size was too large of pizels overall size was fine).  Any ideas?  Thank you.

  Use 'album art.jpg' (without the quotes and with space, not a line of underscore) or "folder.jpg" (again, without the quotes).

  I'm not 100% sure, but I think .m4a files Apple 'protected '. The Zip will not play them. They would need to be converted to a type of file supported as .aac (Apple DRM-free format) or .mp3 (universal format).

  You can use MP3Tag above (free to download) software to incorporate images of cover art in the "extended" part tag. Note that you need to do this for each (long) file rather than the image one (album art.jpg) for all files in the folder even the opposite effect.

• remove the RockBox Bootloader Sansa Clip Plus

  HOW DO?

  I did what the manual on their site said.

  Download frimware (is this clppa.bin?) original file

  Put it on the player

  Sansa updater does nothing.  says "no editable Sansa product is recognized."

  Rockbox utility cannot remove it. what I am doing wrong?

  Frooties wrote:

  Download frimware (is this clppa.bin?) original file

  Put it on the player

  Sansa updater does nothing.  says "no editable Sansa product is recognized."

  You are actually in the Sandisk firmware while you do this? If the player does not find the Sansa updater, that you're always in rockbox. You must run the firmware from sandisk.

• Structure of the menu of the Sansa Clip +: change USB Mode no display

  Hey,.

  I have a Sansa Clip + with a display of death.

  I need to change the USB Mode of DPW, Meteorological Service of the Canada.

  Can someone please tell me the structure of the menu in order to change the USB Mode put down using the screen?

  Other clues would be appreciated.

  Thank you!

  I just found the solution:

  Sansa Clip +.
  1. turn off the device.
  2 press and hold the Center button while connecting the device to the computer.

  http://KB.SanDisk.com/app/answers/detail/A_ID/61/~/enabling-or-forcing-MSC-mode-on-your-Sansa-player

  So now I can install Rockbox and set up the clip + so that it displays all the entries menu...

• What are the dimensions of the sansa clip 8 GB and 2 GB?

  Hello

  I would like to know if the 8 GB sansa clip is the same size as 2 GB clip. (the Player size)

  Thank you!

  All the Clips (1 GB, 2 GB, 4 GB and 8 GB) have the same dimensions.

• Sansa clip plus and itunes - how to transfer files

  I'm really ignorant, but I would be very grateful for the help.   I did research on this topic here but do not understand the answers...

  Basically, I use itunes on Windows XP.  I just boughts liked a Sansa clip.

  I don't know even what kind of files I have in itunes - they are mostly ripped a CD. I guess they were mp3s but looking at recent postings here it looks like they may be something else (ACC file extensions?).   Anyway, I was fiddling around in itunes but have not been able to verify what are the types of files ('cos I'm ignoring it!)

  Earlier today I just copied some of the songs in itunes, go to Windows Explorer and paste in the section music to the Sansa Clip file.   They played very well...

  Then I went and deleted these files on the Sansa Clip Plus, because they were just an experiment.

  Then I went back to itunes and copied the files over.   This time, when I went to paste the files in Sansa Clip Plus in Windows Explorer, I found the option to paste is grayed out.

  I'm stuck and would be incredibly grateful for the help.   As you can from it of the mess that the above, any guidance I get has to be pretty basic.

  the easiest way is just to look at the files in windows Explorer. go to documents, then music. the music folder to itunes folder. That's where itunes stores all the files. you need to configure the computer to display file extensions for known file types. Find your MP3 files and copy them from windows Explorer, then glue them to the clamp.

• Sansa Clip + does turn on at all!

  My Sansa Clip + (4 GB) will not turn on. I tried:

  • By pressing the power button while up to one minute
  • By pressing the power button and the Middle up to one minute button for
  • Plug USB wall adapter
  • Connect to computer

  No sign of life at all.

  I loaded full yesterday and I used it this morning, but an hour later it just stopped working.

  Help, please!

  I found the problem:

  Sansa clips don't work not in sous-zero temperatures, and when they fail, they are not off, so it's a combination of battery flat and temperature.

  FIX: In a setting slightly warm place (sometimes several days) just leave it plugged and turn it on.

• Sansa Clip + playback only 32 gb to 64 gb MicroSD

  I apologize if this has already been posted, but I'm desperate for a solution at this stage.

  I recently bought a Sansa Clip + 4 GB and a 64 GB MicroSD card. According to the instruction on many forums, I used FAT32 format on the map. However, the info panel Sansa Clip + bed that the card provides only 32 GB. Am I missing something?

  Thank you.

  zachary123212 wrote:

  My entire library of music (45 GB) fits on the map, but much of the music is not displayed on the device.

  So why, if you have correctly transferred 45 GB of music to the card, what you say it is only reading 32 GB? Looks like it works for me. More likely is the fact that the Clip + (and all Sansa players also) have a limitation of the database, which you have probably exceeded. This is why it is not see or view some files.

  If I remember correctly the limit of the database on the more the model is around 5000 titles, according to the length of the titles, images embedded in the ID3 tag, and other criteria. If this is the case and you have exceeded the design of the original firmware, the only option for you (in order to use the full capacity of the card) is to install and use Rockbox (3rd party) firmware.

• audiobooks on the sansa clip +.

  I just got a sansa clip MP3 player +.  I joined audible.com and downloaded a book on my computer.  I thought that it was downloaded on my sansa.  Where are the files in the menu of the sansa?

  Help!  I'm not tech saavy.

  Have you used the Audible Download Manager?  I think that's the recommendation until the end of files in the Audible folder on the Clip + and show up under the music/Audiobooks section.

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.

• Sansa Clip does not pass the stage of audio books

  Dear all,

  We have the problem that our Sansa Clip will not skip chapters of audiobooks. If you hold the buttons, fast towards the front/rewinds, but if you just click on it once, nothing happens. It is only in the audio books and Podcasts, but not in music.

  However, we have already owned a Sansa Clip 8 GB, which worked very well. Then we bought a second one (also 8GB) with the problem described. The strange thing: the same audio books work very well on the other Sansa Clip (same firmware version). Also strange: jump works with music files, so it may not be a hardware failure. However, we discovered this last don't bit recently, we already have it back and got another Sansa Clip 8 GB (third). Yet once again, jump does not work. I am suspecting that something with the files is wrong, but I'm intrigued by the fact that they work very well on our first Clip. They all have the same age, our first clip is just a couple of weeks and they all came from the same supplier (Amazon), so I guess it's the same batch.

  The clues someone?

  Thank you very much
  André

  I think that you have access to the setting if you press the button in the 6 oclock position while playing an audio book. I think that there is a choice of menu for the settings of the audio book or chapter. I don't have the video right in front of me now, so I'm not sure about this.

• New Sansa Clip + not showing the track titles

  I recently got a new Sansa Clip + as a Christmas gift to replace my old (his helmet came out). I've updated to the latest firmware (even my old 01.02.18A,), and I copied my entire library of music from the old to the new player. Everything plays and works in the same way, except for one thing: on the new drive, the song titles never see the place, and the name of the file is always displayed during playback of a song. My old player would show the title of the song of the metadata instead of the file name during playback if it was available. I checked that the titles are actually there and were not lost through some freak mishap copy, so I'm puzzled as to why it won't work as my old drive.

  Anyone know of the issue and how to fix it?

  Well, Yes, that is my point of view. All tags are there, and all the rest (album, artist, etc.) is displayed in the main screen of the reading and the news section of track except for the title (who, oddly, has never had a track in any case information entry, but that is not the issue).

  ... well that, as strange as it may seem, the titles of the tracks seem to have returned - after, I moved music off the device to analyze the data volume to activate the Clip + Replay Gain. Really weird, but hey, it works now! (Maybe switch to the computer did it, since I initially copied it directly between devices?)

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• Sansa Clip + problems, correct the records but unknown marking and scrambled the tracks. Help!

  Hi guys,.

  There can someone please offer some advice for me and my husband before we became completely crazy?

  We bought for our daughter the Sansa Clip +, but we are having the same problem occur over and over again.

  During his music and audio books have first been loaded above all was fine. Added items displayed in the files and the right places but, now, for some reason when we add anything, the record of the album can be seen, but it also creates an additional folder that displayed as "Unknown". When you go and try to play inside this folder it does not work... "We always ensure that there is proper use of marking we MP" tag, so I know that the questions are not because of it.

  We have tried everything we can think of. Tried to update but I think we already have the latest version installed in any case - V01.02.18P, performed a factory reset, put in shape and I have tried using different modes, but it makes no sense. Why everything fine was a couple of days and not now...

  We use a 16 GB Kingston SDHC Card inside the Clip +.

  Please any ideas would be welcome because it becomes a nightmare.

  Thanks Claire x

  I should add that I am starting to think that I can have bought a card SD of FAKE writing is rubbing on the front of the card... IS this likely and if so could cause of the issues I am currently experiencing? XX