LabVIEW does not recognize the comma

Similar Questions

• LabView does not recognize my NXT.

  LabView does not recognize my NXT. The small orange window in the lower part
  left corner shows "NXT target not specified." I powered down and back up
  (block the NXT and computer) again after connecting my USB at NXT. The computer is the little jingle when I connect or disconnect both ends of the USB cable.  I have
  tried scanning via Tools/NXT terminal. Pushing scan causes simply one
  image quick to appear and disappear; no 'name', 'connection type' or 'State' appears. They are empty. The help section says that it is 'straightforwrd' and it makes me feel
  LabView will automatically recognize the NXT block that is connected, but this isn't the case. Is there a standard procedure to ensure
  connection-aware in the NXT block by the LabVIEW program? How can I 'specify' my 'target' as it says in the small orange window? (My
  laptop using XP and I tend to use Mozilla firefox...) Thank you!

  Measurement and Automation Explorer (MAX) is another software that we provide. You should have on your computer since you have LabVIEW. If you who open and expand my network, and then expand devices and interfaces, a device USB shows in there? If not, then MAX does not recognize the device, and if this is the case you will not be able to use the device in LabVIEW. If the device is not recognized, make sure that you have the module and the driver for this product.

  Once the unit displays in MAX, you will be able to use in LabVIEW. The module is located here.

  David has.

• analysis of the chain does not recognize the AM/PM indicator

  Hello

  I'm using Labview 8.6. I want to parse a time string, with an AM/PM indicator on the inside, but the format of time code 'string scan. '

  "%<%d/%m/%Y % I: % h: %p %s > T ' does not recognize the AM/PM indicator. The other strings contains the AM/PM indicator.

  Best regards,

  Friedrich Vollink.

  Is the solution:

  define the symbols AM and PM in the control linguistiques\Options settings\time Pffffffffffffffffffffffffffff

  regards,

  Friedrich Völlink

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• I uninstalled flash on my mac now youtube videos will not play. the error says safari does not recognize the video formats available.

  I uninstalled flash on my mac now youtube videos will not play.

  the error says safari does not recognize the video formats available.

  Reinstall the Flash Player... Why did you remove it?

  Barry

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Siri does not recognize the voice.

  My Apple TV remote Siri works fine, but only of Siri does not recognize the voice. I just bought last month. No gross State aid.

  Are you pressing the button of Siri (micro) when you talk?

  Have you enabled Siri in settings > general > Siri?

  If so, then try a reset by unplugging the power cord for 30 seconds.

• ITunes does not recognize the phone

  IPhone SE, Windows 10, update ITunes, McAfee

  Connect the phone to the computer and the window phone company recognizes the phone immediately.  I close the phone company of the window and open ITunes.  ITunes does not recognize the phone.  I have the menu bar, select file > currencies, all the options are greyed out.

  Disable McAfee, and then try again.

• Apple TV does not recognize the Apple wireless keyboard

  My Apple TV (4th generation) does not recognize the wireless Apple keyboard I want to make a pairing.  All my other devices (Mac, iPhone and iPad) recognize the keyboard.  This should be done automatically on the Apple TV, but it's not.  The Apple TV has acknowledged the Apple TV remote and paired with her.  Any help would be appreciated.

  Thank you

  Ken Templin

  I paired a non-Apple clone keyboard and it was somewhat capricious. You go to the remote controls and devices-> Bluetooth, enable matching on the keyboard, and it should appear in 'other devices '. You select and enter the number to validate. It requires no tvOS 9.2.

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• Does not recognize the external HDD PH3100U-1EXB

  Here's my problem...
  I unplugged my hardrive ex the other night and he fell about 2 feet. Today, when I plugged in again, the computer does not recognize the device. I get the message "disk or network connection that the shortcut, Toshiba - HDD is unavailabale.»

  Ive tried to plug it into different usb ports without success. The worst thing is that ALL my photos are there, is there a way to recover the them.or I'm screwed?

  You can test it on another PC or laptop?
  Just to be sure it is not somehow connected to your PC at home.

• Satellite C650 - 1 CT does not recognize the CD/DVD

  Hello

  I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

  Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

  System details:

  Satellite C650-1 CT PSC08E-03M001EN
  OS: Windows 7 64-bit
  Place/country: United Kingdom

  Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

  Thank you
  Lamin

  Post edited by: jammehkunda

  As first step try please remove the optical disc drive from Device Manager and restart your laptop.
  After doing this review please the Device Manager and let us know if the problem persists.

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Satellite 1900 (PS192E) - does not recognize the CD/DVD

  Hey all,.

  I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

  When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

  If there is someone out there who could give me some advice, I would be extremely grateful.

  Thank you very much

  James

  Hello

  OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
  What version of Windows is it?

  If you want to install a driver for the graphics card go into Device Manager and select Update driver.

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.