LabVIEW loop takes 100% of cpu

Similar Questions

• Svchost.ext takes 100% of CPU

  I ran AVG, Malwarebytes, and Windows Defender, and no problems are obvious, but the CPU works almost constant, when the computer is in use. Sometimes, the fan runs so fast and made so much noise that I put the computer on 'stand by' and restart just to calm down the fan. Once when the machine was left running and monitoring, the computer off itself for high-speed fan.  Thanks for any help

  You need to determine which service is to take all your CPU and disable it.  Try the following...

  1. Download and run the "Process Explorer" from Microsoft.  It's basically a task manager on steroids:
     Process Explorer: <> http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx >
  2. When you run Process Explorer, you will see the "svchost" instance that uses all of your CPU.  Place your cursor on the text "Svchost.exe".  A pop-up window will appear that will give you a list of Services that are running under this instance of svchost.  Sign for these services on a sheet of paper.
  3. Start up of the window (start-> Run-> "services.msc") Services.
  4. For each of these services you noted in step 2, find the service in the list, double-click it, and then click on "Stop" or "Pause."  If your CPU goes down to normal, then you have found the service giving you the problem.  If not, then restart or resume this service and move on to the next.
  5. When you have found the responsible service, you need determine how to manage it.  If it is a 3rd party application, then you may need to uninstall / reinstall this application.

  I had a previous experience that 'Windows Management Instrumentation' will often peg my machine 100% of the CPU.  Usually, it is only for 10-15 minutes or more and then it returns to normal.

  HTH,
  JW

• Adobe Coldfusion8, JRun4, m32.exe and m64.exe take 100% of CPU

  Hello

  on both servers CF8 which we are conducting for several years, I could see that recently we have two processes inside the cfusion82\cfusion.ear\cfusion.war\CFIDE\m32\m32.exe folder Jrun4 and cfusion82\cfusion.ear\cfusion.war\CFIDE\m64\m64.exe take 100% of the CPU. Action appears at random and occurs on two server without any user interaction. Kill these processes does not appear to have any effect on the functionalty of the system.

  Also in the reactor for coldfusion I'm not able to see any request related to this behavior.

  Does anyone know what are these processes?

  Strange thing is that the files have been created recently and on each system/instances on different days.

  
  Thank you very much for the reply!

  Seems that you are not alone. You will like this blog:

  xploit.html http://www.code-complete.com/code/index.php?/Archives/64-ColdFusion-CFIDE-Bitcoin-Mining-e

  HTH, Carl.

• Console to take 100% of CPU on CPU0

  SC is running up to 100% then it drops to 50% and the rest b/w 65-75% on my ESX 3.5 update 3 and day 5 boxes.  I have checked all the newspapers, but found no errors.  Talked to Vmware, but they have no idea either as to why.  Any ideas/suggestions?  Thank you.

  When all else fails, restart.  Can you put the esxhost into maintenance mode to migrate your virtual machine, and then restart the host?

  The console takes ALL the CPU, but it is very difficult to say what inside the console is causing the high CPU usage, so the next best thing is to restart the host... to see if the problem goes away.

  It could be hung on a vmotion... so it could be the vkernel which is the CPU of doping.

• Explorer.exe takes 100% of CPU

  Hello

  I have Windows Vista 32 Bit laptop computers of company with the following features:
  Core2Duo 2.0 Ghz
  2 GB OF RAM
  HARD drive of 160 GB (two equal respectively to 27, with 25 GB of free space on partitions C & D)
  256 MB ATI graphics card
  I have automatic updates of Windows, so my version is up-to-date. I use NOD 32 Antivirus (latest virus definitions)
  Since the last two days I noticed that my CPU usage is costantly 100% (even when the system is idle) and explorer.exe takes up most of the CPU (95-98%). So my laptop started running hot with the processor fans works at high speed. I have not installed new software recently. Can someone help me with the problem and bring down my CPU usage. I tried to change the parameters of the START property search (someone posted this solution on another forum), but with no improvement.

  Hello Design_engg,

  Try to start your system in safe mode:

  Restart your computer if it is running. Press and hold the F8 key for 3 seconds after your computer powers initially on. Once you see the menu Options advanced boot (or you hear a beep) you can stop. Up/down arrow keys to highlight your selection. Select Mode safe mode with networking and press ENTER. You should see drivers loading, it may take a few moments. You should then be at the Welcome screen. Connect to your computer using an account with administrator privileges. Now, you download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol install, Update then do a scan of your system in safe mode, to ensure that it is indeed clean! Once the scan done remove anything it finds. Simply restart your PC to see if your problem has been resolved! Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Reset used, bad results. ALL copied from old profile to the new file, &amp; FF file now takes 100% of CPU. I can take off safely profile folder?

  Audio delayed or does not stop when you run a video. So I used RESET. Lost bookmarks & homepage & ADBLOCK and who knows what else. So I just copied ALL the files from the old profile on my desk in the new found under troubleshooting. Put everything back, but now FF use 100% CPU when running. I'm sure that I messed up by copying everything but little, I freaked out when I saw that I had lost so much. What can delete the current profile safely folder? (Yes, I feel like a fool and I regret just is go with my screws upward, but I really need help with this).

  I didn't know how to find your answer to what earlier. In the meantime, I used back once again, & found printed the info that I need to copy ONLY the files that I need between previous & new. (Not done yet). But this time, my favorites return. (YAY! "I have a ton of bookmarks). The CPU usage is now reasonable.

  Thank you all for your answers!

• Take 100% of CPU Utilization in windows Xp sp3.

  Hello

  In the 'System' service task manager was taking 100 CPU usage, can someone help out of this...

  Detail of PC,
  Microsoft Windows XP sp3.
  512 MB memory.
  P4 CPU.

  I'll make this process...
  CHKDSK.
  ALL THE ANALYSIS WITH MICROSOFT SECURITY ESSENTIAL.

  restore power as soon as possible...

  My first suggestion would be trying to add more memory? Instead of the 512 MB, try stimulating your machine at a minimum of 2 GB just to start. BTW, what is your CPU?

• Svchost.exe is running and take 100% of CPU, everything freezes

  OS - XP Professional SP3, version 2002

  1. Norton 360 4.0 full version
  2. Malwarebytes

  1.5gig RAM

  only way to get a PC is by going into task manager and ending svchost.exe

  Hi done as recommended, it was "hpslpsvc" - count must be a service of HP, I am correct?

  Yes, it's the "HP Network Device Support" service.  If you use Google to hpslpsvc, you will find a large number of complaints and a few corrections proposed at HP.

  See, for example, this long thread: http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1286890571088+28353475&threadId=1177917 buried in this thread are information that leads to this RESUME "critical update": http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-65961-4&lc=en&dlc=en&cc=us&lang=en&os=228&product=2512010

  There are also the following thread, which proposed adding hpslpsvc as an exception in Windows Firewall:http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Printer-driver-problem-on-HP-Photosmart-C6280/m-p/839

  From what I can tell, before the HP patch is available, two procedures most likely to solve the problem we have set the "Startup type" HP Network Device support on 'manual' and configure your HP device to use a static IP address.  So... try the HP update.  If that does not work, follow these steps (or add Firewall exception):

  To make the startup type of the service manual

  1. Start > run > services.msc > OK
  2. find HP Network Device Support, and double-click
  3. Set on "manual" Startup type (or you can try "disabled" and see if it causes other problems)
  4. Stop the service runs
  5. OK your way out

  To use static IP addresses (which is a good idea in any case).

  A. printer setup

  Using the controls on the front panel of the printer or the printer's built-in web server, configure the printer to use a manual IP address located in the subnet used by your router, but outside the range of IP addresses used by the DHCP server on your router.  Set the subnet, default gateway and DNS servers also.  (If you don't know what this means, or how do, after return with the brand and model of your router and your printer model.)  Repeat for each HP printer on a network, using a different IP address for each.

  B. configure ports

  1. Open Printers and faxes
  2. Right-click on the icon for the printer HP connected to the network
  3. Click on properties
  4. Click Ports tab
  5. Click "Configure Port"
  6. In the "Type the name of printer or IP address" box, enter the IP address that you set for the printer part A.
  7. OK your way out.
  8. Repeat for all printers HP connected to the network.

  Note that if your HP network device has been installed using the default 'HP standard TCP/IP"port you will notice on the Port configuration tab there is a box to check always 'print to this device, even if its IP address changes.' This box is not on the standard TCP/IP Windows port, and it's hpslpsvc who is responsible to control the IP address of the device to help Windows can find the device if IP address changes)

• Vista 64 SP2: when you run windows update, trustedinstaller takes 100% of one of the drivers for more than 20 minutes

  I recently bought a new computer, when I run Windows Update there is a process called TrustedInstaller.exe, taking 100% of one of the cores for a very long time (> 20 minutes).

  I have vista 64 SP2 and all updates installed (took me over 3 days to complete).

  Also, when I try to install additional features of windows (for example. IIS) the same thing happens, trusteinstaller takes 100% of the base and install new features forever.

  I have not installed additional software so far is very little probable that a virus or spyware is the cause. When I'm not updating the an or install features of windows, the computer running quickly and the cpu load is not high at all.

  How long was the computer connected to the internet before you installed Avast?

  Can update you Avast manually?

  The above, see if a reset fixes the problem:

  How to reset the Windows Update components?
  [Access KB971058 Internet Explore 32-bit only; [Throws the difficulty in DEFAULT and AGGRESSIVE modes, and then restart & test]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Powerd in Activity Monitor uses 100% of CPU, MacBook sounds like a jet taking

  Since I upgraded from Cougar to El Capitan on my MacBook in Late 2009, powerd in Activity Monitor often using 100% of CPU for more than 5 minutes.

  Activity Monitor to stop smoking allows, until I opened AM again, I opened all the time. Allows you to restart, but it happens again and again, especially running iTunes.

  I recently installed a 1 TB OWC SSD and installed clean El Capitan with the Migration Wizard. I've never used my own Mac App. I read something about Nap App causes this problem.

  Any thoughts anyone?

  Turn off the NAP. Most likely you don't need it.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.
  6. Download and install the update of OS X El Capitan 10.11.5 Combo.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

• Firefox 3.6.3 &amp;.4 uses 100% of CPU and not will not always open or close

  Firefox intermittently uses 100% of CPU and I have to manually turn off the computer. Firefox starts or finiosh correctly, the process is alive and that I have to use the Task Manager to end the process until I installed IE7, as I can not access banking by internet with Firefox. Very disappointing as I have ben an enthusiastic user and promoter of FF.

  This has happened

  Each time Firefox opened

  == After upgrade to 3.6.3 and isn't better with 3.6.4, despite the removal of all add-ons

  I have exactly the same problem. FF stay below 50% CPU.

• New DVD on Satellite M40-193 burner uses 100% of CPU

  Hello everyone,

  recently, I replaced my DVD burner with a new. My laptop is a Satellite M40-193 (PSM40E-06M026IT) and the original drive is a carpet * a UJ - 831B. I replaced it with a Sony-Nec Optiarc AD - 7633A because I like the slit in the feature and the Labelflash feature.

  Unfortunately, it's a problem. Whenever I use it, it will use 100% of CPU. I can't understand the problem. Is there anyone who can help me? It is a software or hardware problem?

  Thank you.

  Before we start the discussion please can you me if this optical disk drive is compatible with your laptop model? Did you even check this? Please be honest.

• is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  Hello everyone

  is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  It depends on the image and the module LabVIEW available to you. LabVIEW can open bitmap and png files and convert them into tables: if it's really a monochromatic (depth of 1 bit) you get a table 2D boolean, T for white, F for black. Just look at the index of the item to its details (don't forget that LabVIEW does not use the order of rows and columns, so you must transpose and reflect the table). If you have a 24 bit bitmap, the table will contain the color in hexadecimal synthesis (000000 for black, FFFFFF is white and so on); Yet once, you simply check if the element of the array correspond to your requirements and get its index.

  With the vision that you module con open other pictures and perform advanced on them without convert them into tables. Anyway, you can just type the extension of your image using LabVIEW and see what you get.

  Here is a code snippet to open a monochromatic image

  

• the system svchost.exe uses 100% of CPU

  When I open the Task Manager, I see that svchost.exe uses 100% of CPU and almost crashes my computer. I would appreciate anyone's recommendations to overcome this problem.

  My OS is Windows XP Pro SP3 with IE8

  There is a fix!

  Manually download and install the KB2888505 fix: the link below.  It fixed this problem on my two XP systems!
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41074

• Svchost.exe uses 100% of CPU. How to fix?

  Svchost.exe uses 100% of CPU. How to fix?

  Please click on the below link and follow the steps given on the page:

  http://www.technibble.com/how-to-fix-Svchost-using-100-CPU-memory-leak/ MD MOEEN AJAZ KHAN - MCP, N +, A +.