LabVIEW works 8.6 supports DAQ LVRTE86std.exe engine?

Similar Questions

• My working system only supports Firefox 7.0 and 8.0. I can only find 3.6 and 9.0 available on your website. Where can I find 8.0. I love Firefox, but I can't use an unsupported version, as our Blackboard features will not work.

  Where can I find a download for Firefox 8.0. Work does not support the Platform 9.0, yet.

  English version of Firefox 8 for windows vista is here

  • http://releases.mozilla.org/pub/mozilla.org/firefox/releases/8.0.1/Win32/en-US/Firefox%20Setup%208.0.1.exe

• How the pressure transducer Validyne system-> Validyne CD280-Dual-> SCB - 68-> PCI-6024E-> LABVIEW works and how we can calibrate the pressure sensor?

  Hello

  I am completely new to LABVIEW software.

  I learn a LABVIEW code existing my pressure (attached) acquisition system which has the path of data as follows: pressure transducer Validyne--> Validyne CD280 - Dual--> SCB - 68--> PCI - 6024E--> LABVIEW and I have a few question:

  1. How does the complete system of the transducer to the LABVIEW work? That is, if we apply the pressure of the transducer, it will change the resistance of the probe then...?

  2. How can I find the equation that expresses the relationship between the pressure and the tension to the keys of the Validyne double-CD280 in the LABVIEW?

  3. If I want to do the probe calibration, what are steps?

  Thank you

  You did not include most of the subVIs.

• LabVIEW Application only works on a single DAQ card

  Hi all:

  I built an installer with DAQmx with card USB-6218. It worked very well on the target machine. But when I changed to another card USB-6218. It does not recognize the new card USB-6218. How to apply to recognize any DAQ card?

  Thank you

  DWT

  Hi, TPL,.

  Take a look at This example of the community - it allows you to find the devices via the appropriate product name, rather than his alias of device.  The example could do with a few changes, but I think it will help you

  

• LabVIEW crashing when you build the application (exe)

  Hello

  I am building an application from a simple labview vi (2011). The vi is that sets (boolean = TRUE) a line on the digital output card (NI 9472) when I start to run the vi. The program works very well after that I coded it. But when I try to compile an exe (application) of this project, then labview hangs in the build process. Is this a known issue? Help, please. I enclose my vi alongwith this email

  Thank you

  I'm sorry to hear that gascars.  I downloaded your project and VI and have successfully built an executable in LabVIEW 2011 and 2012 of LabVIEW.  Can you please send me a screenshot of the error you receive?  Also, can you make a simple VI that adds two numbers and see if that can be transformed into a .exe.

  Thank you

  Chris

• Asychronously called VI does not work when it is compiled into EXE

  Hi all

  I have a problem with the code below:

  

  

  This works very well the development environment (Labview 2012) but the VI acquire is not called the EXE. I do not receive the error messages, I have read the discussions on the current path (http://digital.ni.com/public.nsf/allkb/FD7DE8BC8FFC256C862565F4006BE363) VI.

  Any help would be appreciated.

  Ray

  Two questions:

  1. did you check the path in the Open VI reference function?

  2. have you included 'Acqurie.vi' in the 'always included"the construction?

• NotifyIcon() does not work when integrated into the application (.exe)

  Hey everybody,

  I use the NotifyIcon() of System.Windows.Forms.dll (.NET 2.0) to create a menu for the handling of an application. I started work with the example shown here http://zone.ni.com/devzone/cda/epd/p/id/3915and the code works when running in the IDE of LabVIEW.

  However, when I build the code in an executable file, the icon not during execution. Someone has an idea of what could be the problem?

  My code is still very messy (still in try-everything-and-see-what-works phase), so I will clean it before returning and detachment.

  For reference, I'm doing a system-tray only monitor for a NI DAQ 6009. Program begins in the system tray and begins to record data. The user can right click to display the main window where he can change the interval plots or update view.

  OK, I got it working!

  It turns out that I had a few errors:

  1. when I copied on the System.Windows.Forms.dll, I also need to copy System.Drawing.dll because I used during the creation of the icon.

  2. I had the .dll files in the build directory, but I forgot to include the icons used by the program.

  It turns out that the NotifyIcon() has been called, but a picture of the icon was never created! So why I couldn't see it...

• Can't find pallet support Daq

  Hello world! Cannot find pallet assistant Daq. After installation, it has not been revealed. Eventually, there is an additional module or the Toolbox to work with... Thank you for the answers!

  Installation of what? If you did install LabVIEW, then you must install DAQmx.

• Why LabVIEW 2012 does not support USB-6009?

  Hi all

  I recently installed LabVIEW 2012 and DAQmx 9.6 (and also tried with latest version) in my PC with Windows 7. I have the version of Explorer 5.4 measure and automation. I'm working with hardware DAQ USB 6009. Everything seems compatible, but when I try to post data acquisition, it fails. However, I used to use this device (since I bought it last year) with the other PC that has the Windows XP operating system and the older version of LabVIEW 8.5.

  What can I do with LabVIEW 2012 is a message "a 88302 error has occurred." and "This could be an internal error."

  If someone has an idea to solve the problem, please let me know.

  devkotaj

  Hi devkotaj,

  The USB-6009 device should work perfectly on Windows 7 with the software you have listed. This looks like a problem of configuraiton of material for me.

  What are you trying to do when you receive the error 88302? This error usually indicates a corrupt DAQmx driver, which may result from the installation of several DAQmx versions on the same machine. Have you tried repairing your installation DAQmx? I could uninstall DAQmx from the Control Panel before installing the latest driver. You can see our procedure to reinstall or uninstall recommenedd here.

  I hope this helps!

  Andy C.

  Engineering applications

  National Instruments

• LabVIEW data acquisition Setup Multifunction DAQ

  I have doubts as to the acquisition of data in the LabView environment. I used the block diagram (Figure 1) below to review the update of the readings for the execution of a loop.

  Block 1 has been used to enable a task (first steps) with 3 channels (al) analog input AI3 and even set up the channel. In this case, the data bus (data-block 4) are construindos by 4 columns of data (provided by task 3 AI3 more).

  Block 2 is used to set the sampling rate in this case is 1 Hz (1 sample per channel x 1 rate).

  In this case, it worked as I expected (Figure 2). This allows to conclude that the interval between each sample was 1 second. The saw took a second in the iteration.

  The second step was to change the amount of data sampled in accordance with Figure 3 channels in block 3.

  Now, each channel showed 10 samples, while there are 4 channels configured, we have 40 samples. In this case the iteration totalled 10seconds (point to 1 Hz and 10 samples per channel-figure 4).

  The first question is what is the time between each sample obtained by channel?

  In this type of configuration (multiple channels), block 3 provides 10 samples in each channel, as well as the sampling is done, IE, the block gets 3 10 samples from a channel and passes to the next channel or gets 1 comp each channel and repeat this process up to 10 samples per channel?

  What is the best way to make sure that the interval between each sample is constant?

  If anyone knows any text that explains what the function blocks of data acquisition information please.

  Thank you

  Gabriel

  Well, there are several ways to read the signals of multiple signals, and each of them has different behavior. I couldn't see how you get mutiple channels, because in the two codes, you set a channel in your codes. Take a look at this figure:

  

  Here you can see how to set multiple channels using DAQmx, using commas to separate the channels. About the ways different ways that you can read the signals, you can look at the links I sent in my first post to learn more about them.

  In a few words, the time between samples from the same channel is T = 1/Fs, corresponding to the sampling frequency Fs. It is not a rule to determine the interval between samples from different channels, because it will depend on how you did your code, and as I sad, there are different ways to do. You can acquire the samples at the same time, or you can configure your code to read a fixed number of points of a channel and then read another fixed number of samples to another channel (https://decibel.ni.com/content/docs/DOC-28279). You can acquire a finite number of points, or you can acquire all the time. Yet once, take a look at the material that I have already sent. It will help you find the best solution to achieve your code according to your application.

  Kind regards

  Pedro

• LabVIEW 2015 do not install it, autorun.exe "met a bad argument.

  Hello

  I recently got a new laptop and tried to install labVIEW on it. He started to install, but the system loses power in the middle and close. I deleted the National Instruments folder in Program Files (x 86) and retried, but when I run autorun.exe said he "met a bad argument" with a red 'X'. So I tried to launch setup.exe, and he starts, but bypasses LabVIEW and continues for the module in real time, where it says "LabVIEW 2015 must be installed before you install the real time module. Any help would be appreciated.

  Thank you

  
  

• Cluster based popup works in Dev but not as Exe

  Hi all

  I use an old tool TS Popup box to allow the user to enter data in a multicolumn listbox: https://lavag.org/topic/10282-cr-type-sensitive-popup/

  Consist of an invisible cluster containing different types of control which monitors for events click on multicolumn listbox.

  Work in the environment of dev but no exe.  Click in the cell works, but not when you click.

  How something like this work in dev and no exe?

  Déjà vu?

  If you look at the thread of LAVA that you linked, ask you the same question it and I answered it say that there are screws that must be explicitly included in the EXE file. I guess if you search the forums OR thread mentioned there that you will find more details.

• Multisim API toolkit for LabVIEW works not

  
  

  Sorry, I don't have the appropriate license, that's why it does not work...

  If someone is able to do (maybe a moderator): Please remove the post. I can't.

  Ussr123.

• File dialog box works no more Support files Datalog

  How can I get rid of the file dialog function no Support Datalog Files any longer? »

  UH... could you repeat your question please? With a little better explanation? As it is, I don't know if you're wondering if it supports it, or if you complain that it does not, that I do not understand, since the file dialog box is just for file selection. Are you aware of the Datalog functions?

• Aspire V3 - 371 - ADAPTER WIFI STOP WORKING - t - IT SUPPORT SDXC?

  Hello guys, I just got this Aspire V3-371-56TX model and I have 2 qustions

  (1) have this wireless card: Intel (r) Dual Band Wireless-AC 7265

  Windows 10, from time to time, sometims I turn on the laptop, its seems as it dosnt recognize all wifi networks, and even more it don't even have wifi card, I looked into network devices and no wifi adepter, only one cable.

  After a few back on the problome is to solve and it still recognize the wifi adpter and I am able to connect to wifi networks.

  I already updated to the latest BIOS and installed the latest driver for the wireless card.

  and yet this extension members from time to time, no matter what suggstion?

  (2) does anyone know if this model suppurt SDXC cards? I have try on google, to find many others answer some SDHC say only some also say SDXC,.

  What is the real answer?

  Thank you.

  There is a problem of Wifi with Windows 10. On some laptops, 10 Windows installs the driver wifi he wants, if it works properly or not and will not allow you to change it.