REPLACEMENT OF THE USB

Similar Questions

• HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

  I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

  PXE - m0f: exit pxe rom

  no bootable device-insert bootdisk and press a key

  Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

  Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

  Hi @gretschman7,

  Thank you for your query.

  I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

  "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

  Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• Replacing the USB HP Officejet 6500 has

  My konked out wireless and I plugged a USB cable on my 6500 has.  My other half stumbles on the cord, and now I can't print.  I checked the printer and the USB connection was loose.  Is it possible to repair this, OR I have to go to the sales page and order another printer?

  Thank you!  I thought kind of printer was toast, but wil try your suggestions.  Thanks again for your response.

• Bootcamp errors during the installation of the USB on iMac mid-2011

  I tried to install Windows 8.1 on my iMac for mid-2011. The problem is that my optical drive is not working properly.

  I created a USB bootable via Bootcamp Assistant on my MBPr and have tried my iMac HARD drive partitioning, using OSX disk utility and disk in recovery mode utility. I tried to leave the space as free and formatted as ExFat and fat.

  At the start of the usb drive and try to install on the bootcamp partition, I get the error that it is a MBR and not on a GPT partition.

  In addition, do not know if it's important, but it is a secondary internal drive. My main drive of OSX is an SSD. I have no problem accessing the drive in question under OSX.

  Help please!

  Mac 2011 (and more) have challenges with no DVD installs due to optical drive problems. Changes to the file info.plist Bootcamp to allow creating install USB works only partially because of start-up problems. Only two solutions that work with a high degree of success are

  1. replace the optical drive, or,

  2 http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... .

  Following two discussions have some installs successfully, but they usually lead to broken drivers or not functional Apple hardware.

  Re: Bootcamp without optical drive

  Re: Activate Bootcamp install USB for OSX 10.9 * ŒUVRES *.

• Satellite A10 - want to start using the USB

  I have a faithful A10 pro, paralyzed by a skinny concert 17 HARD drive. The DVD - rom drive just failed. I replaced it, that one isn't working. I seem to have a problem with my motherboard (so the tech Guys tell me). Maybe someone out there knows better.

  I have an external (USB) DVD-rom and floppy, that work well, but I'm unable to boot either. It worries me because I need to reinstall windows. I also want to replace the HARD disk drive.

  I can (so the BIOS tells me) boot from LAN. I have a home network (desktop runs vista Home premium), but do not know how to start the drivers for the USB drives on a local network.

  Maybe there is an easier way to boot from a USB device. Can someone help me please?

  Warren Lodge

  I can confirm the info given by Johnny.
  Boot from the external USB CD/DVD drive is not possible!

  You can use only HDD, LAN, ODD USB FDD (floppy) Gold

• Installation of OS 8.6 or 9.2.1 via the USB port on the new world Mac?

  Hallo!

  I have submitted a similar question pertaining to the installation of Mac OS X 10.1 - 10.3 via USB drive in the section "Mac OS X 10.3 and more", so if you saw that please also answer here.

  Here's the situation: I have an iBook Clamshell G3 233 MHz 265 MB SRAM 16 MB of VRAM with 1xUSB port 1.1. I need an operating system installed and the only alternative for Mac OS 8.6/9.2 or OSX 10.1 - 10.3, who is eligible for this machine is PowerPC Linux, which I can only install a copy CLI (Command Line Interface only) of Ubuntu, I strongly prefer not to use. I tried all the methods of creation of the copy USB Installer, I mentioned in paragraph three of this post:install OS X 10.0 - 10.3 from USB on Mac New World? for Mac OS 8.6 and 9.2 disks as well. I have the installation disk OS 8 detail (8.6 green disk with large 8 and photo inside the loop at the bottom) as well as the installation of retail 9.2.1 universal disc (with the big orange 9 on the label), however the CD - R drive is completely shot, as mentioned in the above linked post it can read the disks, but it cannot initialize a boot drive and takes an hour to recognize / + 20 minutes to read a disk sector so the direct installation of disk option is completely.

  While unlike the case in the post above, I can actually get my 9.2.1 installer USB disk copy to start, the copy of 8.6 installer refuses to even be recognized in the boot selection menu (Option at startup) and when I boot the 9.2.1 USB install, I get the notorious "the software of the system at boot drive only functions on the not so copied original media on another drive." message.

  Once again using my CD player - R is out of the question. I did so that the image is "locked" before writing the USB disk, set permissions for image for 'r - r - r -' and formatted the drive as 'Mac OS Standard' (HFS) before writing, and I still got the message. Here are the best: I've used "ResEdit" on a separate Mac OS 9 installation to remove the 'xboo' resource that checks for the media type of the program "/ System/system files", copied the contents of the installation CD to a folder, replaced "/ System/system folders ' with the amended version, creates a new. Master image CDR CD size 665, 8 MB , the size of the original drive, moved the folder with the copy of the installation disk for the installation of OS 9 separate existing, blessed the 'File system' directory, moved back, filled with the contents of the disk image (including the program updated the 'system'), disassembled the new image, 'locked', set its permissions to "r - r - r" - and wrote directly to HFS format USB drive using sudo dd if = «» image path"of = / dev / 'USB drive number' fixed permission on the new USB installation disk, and he successfully started the installer to OS 9.2 modified in menu selection of boot HOWEVER, at the start of the poster Installer always the same message:" the software of the system at boot drive only functions on the original media, don't if copied on another drive. " Even if the function to manage this scenario has been removed, and all permissions are set up correctly.

  I'm doing something wrong? It is even possible in ANY scenario to install Mac OS 8.6 or 9.2.1 installation disk backup direct, or via a USB disk/Flash Drive? Or do I have to buy a new iBook CD - R drive and a Torx T6 screwdriver to replace it just to reinstall Mac OS? Like I said before, we will find more details on the methods tried in the variation of Mac OS X this post link above, so for more information or overview Setup OS X with a USB drive instead of Mac OS just reply to this post. Any help or suggestions are appreciated, and I need an operating system installed on this machine outside the only command line Linux evil. Thank you!

  Mac of this generation will only boot from the internal drive, CD or Firewire.  I just heard rumor a few PPC Macs can boot from USB and it is probably for some OSX version.

  I don't know if target disk Mode or it works for OS9 boot: install 10.4/10.5 on a Mac with a broken / or incompatible optical drive - https://discussions.apple.com/docs/DOC-1020

  Please, do not cross post multiple for one. It is very difficult for people who are trying to help you be able to track what has already been said, especially if we seek the other topic (you do not provide a direct link).

• 3 TB Canvio Stor.E not recognized correctly in the USB 3.0 port

  I have four of the HDWC130EK3J1 external Stor.E Canvio Desktop HDDs.
  If more than one USB 3.0 drive is connected the partitions are not recognized.

  The GPT partitions are displayed as MBR partition protection.
  The MBR partitions are displayed as never applied.

  The drive is detected correctly after that he was to reinsert and close ofd.
  At the same time, only 1-3 partitions are recognized correctly.
  This problem can be reproduced 8.1 running Win and Win 7 64 bit using two different computers, by using the USB Intel and Nec controller.

  Currently, BIOS, update driver update. The HDDs are checked to find errors.
  Is there an update to flash ready or a replacement for the external hard drive option?
  Please note that a replacement with the same model makes no sense.

  My German Embassy has been blocked so I translated it. Sorry the only translator Google

  There could be a simple answer to this problem:
  There are two standards different MBR and GPT partitions.

  MBR works with drives up to 2 TB in size, but it can record handle t with more than 2 TB of space. MBR also only supports up to four primary partitions if you want more, you have to do one of your primary partitions an extended partition and create logical partitions inside.

  GPT (GUID Partition Table) is a new standard which replaced the MBR. The TPG requires UEFI. This standard isn't limited like MBR and readers can be much larger and size limits depends on the system and its file systems. It allows an almost unlimited amount of partitions.

  I guess that the system cannot recognize the partitions (from additional external HDD) due to the limitation of the MBR.

• HP Pavilion 1423w: front of the USB 3.0 Hp Pavilion 1423w

  My front USB 3.0 ports quick it works of course me or my son forcing me the USB cable where it damage the teeth. I bought a lcd with two usb 3.0 ports fan controller with ect card reader port. Everything works except the USB ports. It came with a header 20 terminals, I have connect directly in 19 pins on my motherboard header. It also has a slider pin 2.0 9 USB and I have some that I have only plugged in the correct place also. I even tried it in different places around switching. I bought an additional USB 3.0 front with two ports and is a strip to 19 pins I tried o have nothing! "So I tried to correct the teeth in the original that he came with, I got them as straight as I could, then I plug this header 19 pins and what you know", it worked! Temporarily of course teeth in the pendrive has been damaged to bad. But she recognize him at this moment. Any suggestions?

  All can be replaced. This is the part # is 67187-008.  An example and the cost can be found here or here.

• plotter / cut not the usb ports

  I recently moved my office and cutting cutter / plotter in another room. Now, for some reason, my vinyl cutting software does recognize not all USB Com Ports and therefore, will not cut.  (I tried configuring it for each port with no luck). When I open devices and printers and look at USB / series of properties of Strawberry, it shows that its on Com9... and I have 6 USB ports I know.  First question... where I expect to identify the USB ports are what #s.  4 behind the pc and 2 in front.

  Com is a reference to the COM port and is a "serial port".  Replace the USB port.

  PS <>, change the hardware configuration does not cause this problem.   Someone changed the settings.

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• The USB IMAQ camera driver

  I read a lot of discussion on the issue of the compatibility of driver usb IMAQ and im still looking for a solution for my problem. IAM using labview 2011 on windows 7 and im trying to use a usb webcam in my labview program and it requires to install the camera driver IMAQ us but im having problems with palletes for usb camera. I installed the latest version of the vision acquisition software and I installed the usb driver detected on this link http://zone.ni.com/devzone/cda/epd/p/id/5030 ... Please can someone help me with this problem?

  Hello

  This VI is not the type of the camera. You don't have to replace it.

  The picture I have attached above is an excerpt - This means that you can drag directly on your block diagram and code will be automatically popu...

  ARO

• The USB receiver for my wireless one mouse overheating and now unusable

  Original title: what's happening with my mouse?

  My wireless Microsoft 5000 mouse: the usb piece has overheated to the point, you can actually burn your fingers on it and now it won't work.  It's the second mouse what has happened.  I had the same exact type of mouse before and it did the same thing, I thought it was a fluke and I love that mouse, so I bought another.  Of course, now it overheats too.  It is not my computer because I use other usb mice, and they do not overheat.  Is this simply faulty mouse, because I read of others having the same problem.  I spent $80 for 2 of them last year, can it be replaced?

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you follow the link and check.

  I also suggest you to contact the manufacture of your computer and your mouse to check.

  http://www.Microsoft.com/hardware/en-us/support

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• PC does not recognize the ipod when I plug in the USB cord.

  I have an ipod touch, and it will replace my old ipod.  When I plug the USB cord, nothing is recognized by the computer.  It is also not recognize my old ipod when I plug it now.  I have other devices that use a USB cord, and they work as they should.

  Apple told me to check with Security Essentials to see if they are blocking a pilot... I am quite at a loss.  It's the ipod or it is safety, or is it the computer?

  I tried everything on separate computers, and they don't always work.

  Any help is appreciated!

  It is not MSE-you get a warning if it were.  Try another cable or try on another PC.  It sounds like the cable might be the problem if all of a sudden or iPod works.

• Installation of the USB-5680 kills Labview

  Does anyone know why the software that comes with the USB-5680 power meter would cause Labview 8.2 no longer start successfully? I think that the error was: an unrecoverable internal error: lvint.cpp, line 1538.

  Hello LabTech,

  I don't know what is the cause of your problem, but you can try to replace the file ni568x.rc with the attached to this knowledge base article. I found a question where to replace this file corrected exactly the problem that you see. I would like to know if it works and if you have any additional questions.

• Where can I get a transmitter replacement of conection usb for keyboard Microsoft Wireless Comfort 1. 0 has (1027)

  Where can I get a transmitter replacement of conection usb for keyboard Microsoft Wireless Comfort 1. 0 has (1027)

  Skype id: andrewgranville

  E-mail address is removed from the privacy *.

  Hi André,.

  Good to know that you were able to resolve the issue and thank you for sharing information.