Aspire V3 - 371 - ADAPTER WIFI STOP WORKING - t - IT SUPPORT SDXC?

Similar Questions

• Satellite C665 - Ethernet adapter has stopped working

  Hello
  A few weeks ago, I noticed that the ethernet adapter has stopped working. It has disappeared from the Device Manager, and I can only access internet by wifi.

  When I turn off wifi and connect the ethernet cable (which connects to the modem) nothing works.
  I tried to restore the windows settings, but that didn't work.

  Can someone help me?

  It is possible that the LAN module is defective.
  All you can do now is to check and install the original recovery image and check the functionality with the factory settings. If the problem persists it is definitely hardware problem.

  I think that it is not worth to fix it if you can continue to work with WLAN connectivity.
  What do you think of this?

• WiFi stop working on my Inspiron 1525 after installing Windows updates

  Updates of Windows installed a few days and wifi, stop working. I uninstalled the windows updates since that day, updated the WLAN driver and even updated my BIOS, and nothing seems to solve the problem. He says I'm on local access only, but when I connect to a modem, I have still no internet to diagnose problems. Any help would be great!

  If possible, try to connect to a different wireless network and see if you continue to have the problem.  If you have other systems that connect to your network that aren't problems check everything their network settings and make sure that there are no differences on your system.

  Try the safe mode with networking, (hold the SHIFT key down while clicking on restart and then choose Safe mode with network) once in failure of Windows to see if you can connect.

  Check power settings, simultaneously press the windows key and x and select Device Manager, look for the wireless card and double click it, choose the power management tab and delete control "allow the computer to turn off this device to save power" and then try to connect.

  Change the power plan to high performance, press the Windows key and the X set button again and choose power options, power management has chosen and select high-performance, plug in the AC adapter and the wireless card test.

  Please reply back with the results and if you can what Windows updates has been downloaded.

  TB

• Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

  Hi guys,.
  Since a few days my wifi stopped working.
  If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

  

  And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
  
  
  
  If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
  
  
  
  My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
  Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
  
  I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
  I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
  
  I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
  
  HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

  This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
  
  I tried different settings too:
  I changed the channel, I put 802.11 g on my router, APSD off on the router.
  I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
  
  The hardware test detects any failure.
  
  Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
  In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
  
  The only way I have is USB tethering with my Nexus 5.
  
  Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
  
  -------------------------------------------------------------------------------------

  What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

  WAWood,
  I took a risk.
  I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
  I had to switch from Win8.1 to 10, but the Wifi problem is solved!
  
  I'm still guessing that was the problem...

  Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
  
  In the next few days I'm checking the linux problem (reset deleted primary partition).

• WiFi stopped working

  We're both 73 years old so not savvy with laptops, etc.

  our wifi stopped working, but he works hard cable

  does anyone know what has happened and how we can fix it, please

  Hi Joyce,

  Let me see if I can help you through this...

  The problem lies in the configuration 'power options' in the 'control panel' as some changes simple to do to correct the problem.

  I have written instructions as well as provided photos of each step - please see the pictures for a better understanding.

  Good,

  1. click on the 'Control Panel' then icon in the Control Panel window opens.

  2. at the top right of the search window "" view by: category " you will see a small arrow pointing down next to the word 'Category' - click with your mouse as 2 more options will appear in a menu drop-down."

  https://drive.Google.com/file/d/0B5B...JTQXNEMUk/view

  3. click on the option "large icons" you will then see a lot more features in the control panel are displayed.

  https://drive.Google.com/file/d/0B5B...ZGSVB0Zm8/view

  4. scroll the words 'Power Options' and click on it that a new window will open.

  https://drive.Google.com/file/d/0B5B...pTTmZBTXM/view

  5. you will see 2 options here - if not click the drop down arrow in the center of the page to reveal the words - 'Balanced' & 'High Performance '.

  https://drive.Google.com/file/d/0B5B...dpVzVHT0U/view

  You should see a small circle checked next to the word "Balanced" - you need to change this setting by clicking on the 'High Performance' next option to fix the wifi issue.

  Once you have completed these steps: close the window and test your wifi to see if that fixes the problem - if it isn't trying to "Reboot" or "Restart" your laptop and retest the wifi.

  Joyce, please report it here in case of problems you may encounter and need assistance.
  Also please report back here if this corrects the problem of wifi.

  Aloha,

  DBOBA

• Satellite L770 - ethernet adapter has stopped working

  Hello
  I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

  I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

  Any thoughts?

  Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

  Have you ever done this?

• my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  Hello

  1 have you made changes to your computer recently?

  2 are you able to access the Internet through an Ethernet cable?

  I suggest you to follow the steps in the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• Portege M100 - WiFi stops working

  The WiFi on my M100 stopped working after I opened the panels on the bottom (Bay of RAM memory).
  Nothing of course unplugged it nor around the switch.

  Any suggestions?
  Am online now with the help of an adapter USB would like to repair the on-board system.

  All ideas welcome.

  Hello

  Did you remove the memory modules, or you did things near the WLan module?

  There could be two possible reasons; you have logged out somehow the WLan (black and white) antenna cables or removed somehow the miniPCI WLan module slot
  I don't know what you did in the past but must check if the wireless network adapter is connected correctly.

  If its connected properly then check if it s active.
  You can activate the Wlan using the FN + F8 key and switch the Wlan on the side of the laptop
  In addition, you can activate the wifi card in-Wlan card-> Advanced tab > Device Manager.

  You should also check the BIOS if there are a few settings on the WLan

• Lightning network adapter has stopped working

  Hello

  All of a sudden, my (original Apple) map network Thunderbolt has stopped working. I'm looking for advice to get it working again without reinstalling. This is the second time in 6 months that it happened, and the last time a reformatting it fixed and restore my entire user account does not restore the problem, so all signs point to something in the heart of the system and not "userland".

  Why I know that the adapter is not the problem:

  -Adapters two colleagues also do not work

  -Adapter works very well in recovery, but not once started

  What happens when I plug:

  -Lights led network switch, so a link is established

  -L' adapter remains 'red' in the network settings

  -dmesg shows:

  IOThunderboltSwitch < 0 > (0x0): listenerCallback - HPD Thunderbolt package for road port = 0 x 0 = 1 disconnect = 0

  [Start of PCI configuration]

  [End of PCI, bridges 14, 15 devices configuration]

  No obvious signs of problems.

  Steps taken to solve the problems:

  -If I delete the card of network settings, I can never add again; He simply never shown even if it is plugged in and the link light is on the switch.

  -Crushed/Library/Preferences/SystemConfiguration and restarted. Always impossible to add the interface, as mentioned above, it never appears.

  At this point, I am of ideas. Any help would be greatly appreciated.

  Thank you!

  Figured it out... it's driver Linksys USB3GIG crap that breaks the kext IONetworking signature.

  ERROR: invalid signature for com.apple.iokit.IONetworkingFamily, does not load

  After removing AppleRTL815 * from /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/ and restart, thunderbolt ethernet is back

• 2007 Macbook Pro Wifi stopped working

  Out of the blue, the Wifi on my 2007 MacBook Pro has stopped working.  He said "turn wireless on" and the button lights for click, but when I click, nothing happens. Went to the Network Diagnostics and did the same thing - same result.  Guess the airport card is shot.  Nothing else to try?

  Thank you, Mary

  Try a reset of the SCM.

• NB520 - Wifi stopped working suddenly on its own

  Hello

  I bought my NB520 to Singapore.

  WIFI worked fine for almost 3 years, until very recently, I have a strange problem.
  It stopped working suddenly on its own during almost 2 weeks in June.

  Just when I was about to send it to the repair center, he returned.
  But WIFI comes on and off for a few weeks before he stabalised.
  It works well since then, up to 3 days ago, he set out again like last time.

  Usually, when I switch on the netbook, WIFI (red light) lights a few seconds.
  To use Bluetooth, I just right click on the Bluetooth icon and press "Turn on Bluetooth function" and Bluetooth turns on.

  But now when I do that, it tells me to "connect Bluetooth device".
  Is it a hardware problem or software?
  I spoke with a local technician, but she is not sure too.
  Would appreciate if you can help me with this problem. Thanks in advance.

  Kind regards
  Fionna

  > Is it a hardware problem or software?
  This can very easily get the laptop back to factory settings.
  But I guess that this is not an option for you at this time. Isn t it?

  However, the question that you talk about in your message looks like the isn t correctly chosen and active WLan.
  Usually, you can use the secret key FN + F8 to activate and deactivate the module WiFi and BT.
  Both keys would switch WLan BT as well as disable and enable the modules.

  Have you tested this in the past?

  Where the FN + F8 does not work as it should, I recommend you download the driver Wlan from Toshiba published page for this series of laptop and reinstall the driver Wlan.

  Your comments would be greatly appreciated.

• Why does my network wireless adapter constantly stop work?

  When using my laptop, whether online or not, my wireless connection will stop working. When I use the shooter Troubé it tells me that my wireless network adapter is disabled. Why is it run continuously off the coast?

  Hello

  Of course, you can try these suggestions and let us know the results so that we can better help you.

• Acer aspire e1-572 cd/dvd stopped working

  The CD/DVD drive has stopped working. When you insert a disc, normal sounds, but can here a slight ticking, then disk stops not recognized by Windows Explorer. He has worked in the past as the installed disk drivers for the new printer about 6 months ago.

  Any ideas please?

  mjmuk,

  You can contact Acer technical support in your area to see what options are available to you, which probably is to buy a new.

• My keyboard for my Acer aspire switch 10 has completely stopped working

  I use my Acer 10 for about six months and had improved to win 10 just now with no problems.  This morning the keyboard stopped working.  I checked the Tablet contacts, clean them with a brush and a cleaning and not restarted, no chance.  The keyboard when it starts allows me to enter the PIN code and I have a USB mouse attached to the keyboard that works, but none of the keys work when I am connected to Windows. If the screen times out and I try to enter the PIN code again, nothing.   I can navigate around using the mouse, but not have the ability to enter information on keyboard.  I'm stumped and would apprecaite any suggestions welcome.  Acer has been great so far?

  I solved the problem!  It turns out it is 10 Windows that caused the problem.  Filter keys were turned on somehow and they disable the keyboard for users with disabilities. I discovered this on another machine when it happened too, but this time a unrecognized icon appeared in my system tray.  The icon has been for these filter keys and when I turned off their keyboard is back.  How this stupid thing got switched on I don't have a clue.  The original pc with the problem did not show a filter key icon in the system tray, so I was puzzled, did not know they existed.  Something for others to check if this is the case for them.  Thanks for your help.

• Aspire keyboard E5 - 571G letters stop working?

  8.1 Windows x 64
  BIOS has been updated recently, as well as the touchpad.

  Sometimes my keyboard doesn't work, more specifically a set of keys: B N Y U H 7 and 8.
  It is always those who stop working. I bought the laptop Dec 2014.

  This happens when I start the computer or even in the middle of me playing a game or surfing the Internet. I noticed this only when I'm tryign to type something.

  I pressed NUMlock to judge if he deal with it - don't. I've done close to the bottom of the laptop, remove the power cable + battery and keep the power button down for 10 seconds - no problem.

  I want to update the keyboard driver - he could be the culprit and yet I can't find anything on the keyboard Acer drivers and manuals section. The touchpad has been updated.

  The only way to make it work, is if I go to the control panel > troubleshooting > hardware.
  Then a strange message appears at the end of scanning: some changes may not have been detected.   DETECTED (but a tick next to her).

  Can anyone help please? It is a mobile phone fairly recent. It is still under warranty! However, I bought the Portugal and I live in another country where I don't trust how my phone is carried out by people here. Believe me, you wouldn't either.

  Can someone help me find the driver for the keyboard, so I can update or maybe another solution?

  How can you tell that I need to replace the entire keyboard only after 14 months? It's crazy. Do you mean that computers Acer laptops break it easily?

  For everyone who has had this problem to do what I did. What I read on someone else who had the same problem - and a lot of people have it and has nothing to do with the material, but with the software.

  Do not despair, here is the solution that has worked for me so far and didn't make me replace my keyboard like this man here says - what a waste of money.

  (1) type in your search for windows: regedit.
  2) go to computer > HKEY_LOCAL_MACHINE > SYSTEM > setting > Services

  (3) scroll i8042prt (it's the name of my PS/2 keyboard in the system).

  4) go to Enum > make sure your files NextInstance and Count are on hexadecimal number "1".

  That's all.

  Since I posted this, I've not had problems with the keyboard at all.

  I hope that this will be your solution as well!

  I recommend installing Acer Philips (drawn from the acer site) so you are able to see what available drivers, you can install and keep your laptop up-to-date. And no, Acer did not a driver update for the keyboard.

  [edited to conform to the guidelines]