lack of drivers Base system on my HP laptop.
This is the ID of material under properties:
PCI VEN_1180 & DEV_0843 & SUBSYS_30CC103C & REV_12
PCI VEN_1180 & DEV_0843 & SUBSYS_30CC103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880
Can you advise where to find this driver?
Hello
If all goes well
Try to download and install the driver from the following link.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
HP Elitebook 8540p: device drivers Base system shortfall of 10
Hello
I win 10 64-bit running on the HP8540p.
The Device Manager shows 2 devices with missing drivers base system:
PCI VEN_1180 & DEV_0843 & SUBSYS_1521103C & REV_14\4 & 3b8bcf53 & 0 & 32F0
PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C & REV_14\4 & 3b8bcf53 & 0 & 33F0
What are these devices and where I can get drivers for Win10?
Thank you very much
Nick
Thank you banhien,
the Lenovo driver did not work.
But with your hint about the Ricoh card reader, I have tried the win 7 driver hp and it works now.
http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_79991_1
-
I have a hp envy phoenix 810-150's cto office. In device manager, I have a lot of basic system who have not installed the drivers. I am running windows pro 8.1. How can I get the drivers for base system devices. I already tried the readers on the support page for my computer with no luck.
Hello:
Peripheral equipment basic system of Googling a few ones ID drove so me to believe that the chipset driver must be installed, download and install the latest chipset driver and see if that installs one or all of these devices and the last two.
The first file is the auto install file.
The driver you need for controller PCI of Comms Simple is it.
-
Driver missing for 'Base system device' x 2 after Windows 7 install on laptop
Hello
I have two drivers 'base system device' missing on my laptop. Previously, I had Vista Home premium installed. Ive now formatted the HARD drive and installed 7 Home premium.
My notebook is a laptop ' HP Pavilion Thrive dv6822tx special edition Entertainment. " Details on the two points are the following:
1 location: Bus PCI 7, device 9, function 2
Hardware ID:
Hello
Install:
Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)
Also check this thread:
Windows7 upgrade for dv6000/dv9000 models Guide -
4440 s laptop: Base system device
Hello, I have a laptop hp 4440 s and I am running windows 8.1. I'm unable to find device drivers base system as my laptop is missing from these drivers. Please help me.
Hello:
The Base system device needs the driver JMicron card reader.
-
Dv4-1430us: lack of Base system device drivers
I just clean installed W7 Home Premeuim after a failed attempt of W10, it seems that I'm missing three "base system device drivers. I went to the HP page where the drivers are usually, but I don't see all the downloads.
If the download page of is the mystery pilots BSD here? Windows Update can't find them.
DV4 1430USHello:
You need this driver for the card reader (Base system Dev):
This package contains the driver for the JMB38X Host Controller Card Reader to
models of portable supported and operating systems. JMB38X card
Reader supports the following types of media: SD, MS, MMC and xD. -
HP ProBook s 4730: lack of Base system device drivers
Hello world!
A few days ago I received an error message that my device Base and an unidentified device system no longer have the drivers installed for them (Code 28). This can happen after my last update of Windows, but I'm not too sure. When I try to update the drivers of the device for each Device Manager, Windows cannot find a driver for the device.
These are devices that are affected (not sure if you need the hardware ID, but I included them):Base system device
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
Unidentified device
USB\VID_138A & PID_003C & REV_0086
USB\VID_138A & PID_003C
Don't know if it is also related, but my Standard VGA Graphics Adapter is also having similar problem and cannot start (Code 10):PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C & REV_00
PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C
PCI\VEN_1002 & DEV_6760 & CC_030000
PCI\VEN_1002 & DEV_6760 & CC_0300
I use Windows 7 Home Premium (64-bit).
I saw that I can download the drivers from the HP site, but I'm not really sure which ones do I need to download. Some people recommend that you download the chipset, the audio media and network card drivers for my laptop to try to solve the problem.I can compare the drivers with the names of device in Device Manager, if that's the best way to go about it. I wanted to just a few tips on the best thing to do.
I have some knowledge of the software, but I don't mess with hardware very much, answers in layman's terms would be greatly appreciated!
Thanks for your time. If you need some info on my ProBook, let me know.Hello:
You need these drivers...
Base system device:
The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.
FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe
Unidentified device:
This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.
FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59624.exe
Standard VGA Graphics adapt:
This package provides the AMD video drivers, driver audio Control Panel and HD for laptops taken in charge who are running a supported operating system.
-
EliteBook 8440p: lack of drivers for the Ricoh Bay8Controller and Base system device
Hello
In the Device Manager my EliteBook, under the heading other devices, I have the 2 below devices for which no driver is installed. What are and how to upgrade drivers (Windows cannot find drivers)?
- Device base system with hardware ID:
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C & REV_14
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880
- RICOH Bay8Controller with hardware ID:
PCMCIA\RICOH-Bay8Controller-F1B2
PCMCIA\RICOH-Bay8Controller-0000-0000
PCMCIA\RICOH-0000-0000
Thank you for the support!
Hello
Try this link
-
HP Pavilion dv8-1099eo: device Base system and unknown device drivers Windows 7 Ultimate lack
Hello
Since a new installation of Windows 7 64 bit it is has little material without driver on all simply not recognised. Here is the hardware ID's I hope someone can help get this sort? Laptop computer runs much slower with the CPU it has. An upgrade from 4 GB to 8 GB of RAM is useful?
1. base system device
PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_08802 - system base unit
PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_08803. base system device
PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_08804 - unknown Device
ACPI\ENE0100
* ENE0100Thank you
Michael
1, 2 & 3 is listed under "Driver-storage" JMicron card reader ACPI\ENE0100 should be ENE CIR Receiver Driver under "driver-keyboard, mouse and input devices.
On your page of Support here:
-
Hello
I have a HP Pavilion dv5 - 1183cl has been upgraded from Windows Vista to Windows 7 Ultimate (32 bit) and I have a few questions.
I have four errors appearing in my device manager, three Base system device and an unknown device, and I don't know what they are or where to find the drivers (since I don't know what they are). In addition, the battery will recharge not (it doesn't seem to be anything wrong with her physically). I wonder if the errors below are related to the battery issue. This is the hardware for each error entry ID.
Basis of the system of the device (bus PCI 6, device 0, function 1):
PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_0880Basis of the system of the device (bus PCI 6, device 0, function 3):
PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_0880Basis of the system of the device (bus PCI 6, device 0, function 4):
PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_0880Unknown device (on Intel(r) ICH9M LPC Interface Controller - 2919):
ACPI\ENE0100
* ENE0100Someone at - it solutions? Thanks in advance,
Jason
Your model has Windows 7 drivers posted. ENE CIR Receiver Driver & JMicron card reader driver, you must:
-
Laptop HP ProBook s 4540: lack of Base system device drivers
Hello
Currently, I have a laptop HP ProBook 4540 s notebook PC (Energy Star) and found that my Base system device driversare missing. I have tried very hard to find, but in vain. Honestly, I don't even know not what they are or what they do, but I'm sure that I need them. Please help me if possible.
PS This is my first question and sorry if the format is confused or lack of useful information. If there is a better way to format this issue please inform me and I wil try to do better next time.
Hello
Try:
JMicron card reader Driver
http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe
If it fails, set the hardware ID.
-
4440S proBook: drivers missing "Base system device" of 4440S
Hello, I recently made a new installation of Windows 7 Home Premium 64 bit on a Probook 4440 S.
I went into Device Manager to install the missing drivers. I'm missing two drivers and I was unsuccessful driver update by using the option "Search automatically for updated driver software" on the tab in properties.
I searched online by using the values of LDS of material on the Details tab, but links in other posts were most valuable. Can someone help me?
Lack of drivers by using the property of LDS of material on the Details tab
#1 base system device
PCI\VEN_197B & DEV_2393 & SUBSYS_17F3103C & REV_30
#2 base system device
PCI\VEN_197B & DEV_2392 & SUBSYS_17F3103C & REV_30
All drivers are displayed on your page, including the JMicron card reader support:
http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229487&swLangOid=8&swEnvOid=4058
-
Equium A210: Drivers XP for base system device, modem
I need to find drivers for base system device?
What is c?Need drivers for the modem device and bus audio high defination.
Can someone help me?Hi mate,
Just a quick question: have you already checked the drivers Toshiba and Downloadsite?
I found all the drivers you need then please check the following site and choose / Download your drivers:http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Welcome them
-
Hello, I am using HP ProBook 4730 s, produces A1E71EA. I recently installed windows 7 ultimate x 64 and I went to install my drivers. Here, I have two of them that say "base system device" when trying to update automatically using the upade driver it says that it cannot do. I also he who says network controller, one is bus USB, pci simple communication and an unknown device.
Can you help me please?
Hello
For the first 2 hardware ID, install the below card reader driver.
Then, install the following:
Kind regards
DP - K
-
HP ProBook s 4330: working in window 10 missing/no Base system device drivers
Hello
I installed window 10 and since then, I have had different problems.
Lately, I noticed that the device driver Base system is not working and also something else not identified.
Please find below Haedware IDs for those who do not work the drivers
PCI\VEN_197B & DEV_2393 & SUBSYS_167E103C & REV_30
USB\VID_138A & PID_003C & REV_0086
ACPI\VEN_HPQ & DEV_0004
Can help you in there to fix it please?
Thank you
G
Hello:
You need these drivers for devices...
The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.
FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe
This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.
FTP://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66915.exe
This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.
Maybe you are looking for
-
Tree genealogy .html file with preformatted text appears correctly in high office Firefox but not in the version of the tablet. Misalignment occurs.
-
Problem connecting to a printer USB to Equium A60
I tried to connect a USB printer, Photosmart C3180, to my laptop Toshiba Equium A60 model but when I load the software and follow the instructions it seems to load correctly, then at the end the following error message appears "specified Port unknown
-
Using HP system recovery disks
I have replaced a failed hard drive on a HP Pavilion h8 - 1380t. I also ordered a set of HP recovery disks, which is a disk 4 labeled value, "System Recovery" as well as a 5th disk of "additional recovery." Only 1 of the 4 disc set is bootable. When
-
Hello I installed Windows Search 4.0 installed on my machine yesterday. I added my file & Outlook to search settings, but it doesn't seem to be indexing at all. If I manually start indexing it immediately says "Index complete.", but it does not chang
-
Windows 7 Ultimate HP ProBook 4530 s, can't see Ethernet card.
I just installed a new OS and I can't get on the Internet to download all the drivers. Apparently, the system doesn't see the Ethernet card. Drivers for this device are not installed. (Code 25) Location PCI Slot 5