Lack of function external nivissvc

Similar Questions

• "Lack of function external lvanlys.dll ' when executing EXE

  Windows 7 x 32, LV2009SP1 / LVRuntime 2009

  I am trying to build an EXE from a customer code.  They use the analysis library (NI_AALBase.lvlib).

  It works well on my dev machine.  When I create the EXE file and place him on a target with LVRuntime on that machine, I get the error:

  Lack of function external lvanlys.dll: Mean_head:C NI_AALBase.lvlib:Mean.vi.

  I explicitly added the lvanlys library to the project.  I added the library as a source file in the build.  Finally, I added the DLL itself to the project and as a source for the build.

  Still the same error.  The DLL is located in the folder data after construction.  I tried to move it in the same folder as the EXE file and in the system32 folder.  Nope.

  I just changed the extension of the DLL to dllx and tried again, and I get the same error, so it looks that it can't find it.

  Do I need to register this DLL or something?  Is there a file?

  You are an installer of construction or simply transfer the executable file?

  If you are just transferring the executable file, make sure to include the folder "data" beside him.

  (You can also check if the target computer has the engine execution of std (~ 170 MB) and not only the minimum (38MO).)

• Associates file icon showing an incorrect icon and a lack in functional terms in quick menu

  I have a windows system 7 and I use SolidEdge a reason any all the files associated with the *.asm program files IE get an empty note with a right corner folded, the file opens in the right program but quick menu (right click on the file) does not give me the full options, how do I put it to give me the full functions and show the correct icon

  Hello

  Open your ASM file is to double-click it. This allows the intelligence of windows to decide the correct application to open your ASM file.

  In case your ASM file does not open, it is likely that you don't have the software installed on your PC to view or modify the ASM file extensions.

  If your PC opens the ASM file, but it's the wrong application, you need to change your Windows registry file association settings. In other words, Windows is associated ASM file with the wrong software extensions.

  Your system registry may have infected, I suggest you run the registry cleaner to fix

• PIX - Polo or not in function external interface used

  I'm still digging into that, but need not NAT all traffic begins inside for 2 of my low-security interfaces (dmz1 & dmz2), but have the same traffic PATed at the address of the interface if it goes on the external interface.

  I use nat (inside) 0 0.0.0.0 0.0.0.0 for the necked traffic that goes inside to dmz1 & dmz2. Then, this prevent me to put in another statement of nat [like nat (inside) (1 0.0.0.0 0.0.0.0)] as causing an error message saying the nat statements overlap. Makes some sense.

  It looks like a "static (inside, outside) interface 10.1.1.0 netmask 255.255.255.0" would be the ideal solution. But I get an error message "Invalid netmask interface option" when I try to enter that. So, who should not be able to address groups. It also won't let me do a static unique to the address of the interface, so that's going to not steal even though I was ready to toss around all the guests individually.

  I was hoping that static control let me to overload all inside responds to the address of the external interface when the data is out the 'external' interface, while the "nat (inside) 0" Let me NAT not nothing will dmz1 & dmz2, but not dice. "»

  Any thoughts on what I'm missing here? It must have a way to do.

  Thank you!

  Have you tried that?

  Let's say you have:

  192.168.0.0/24 inside

  192.168.1.0/24 on DMZ1

  192.168.2.0/24 on DMZ2

  permit access ip 192.168.0.0 list NoNATinside 255.255.255.0 192.168.1.0 255.255.255.0

  permit access ip 192.168.0.0 list NoNATinside 255.255.255.0 192.168.2.0 255.255.255.0

  NAT (inside) 0-list of access NoNATinside

  NAT (inside) 1 192.168.0.0 255.255.255.0

  Global 1 interface (outside)

• Satellite1900 dull display at startup of the system + lack of functions in the system tray

  Satellite 1900-803 OS - XP - Home (SP2) has developed an error at startup, it starts, but has the matte screen (the equivalent of the lowest screen brightness setting) and a few icons missing in the system tray in the task bar, (ie. icon remove a security device, mousepad icon & hide the unused icon button), only fix I found is to do a system restore , that everything returns to normal, icons etc, restored once the screen not more problems occur even after hibernation, (restore point should be a point of automatic system generated manually created)

  Have you checked the drivers to display, bios updates, control panel in utilities to display etc., all seem correct and up-to-date, can anyone help, I checked the forums but not found anything similar, I checked, the reset screen FL inverter connections, but no change, dysfunction on AC or battery.
  suspect a software problem? BIOS problem?
  machine is 4 years old, and no real probs so far a complete system don't have reinstall (to the iradicate virus that I couldn't get rid of all ok after that, enough compatent during the disassembly of the machine and basic repairs but depths of software are becoming my cleats of knowhow:D about 1 year ago
  any help would be received with gratitude
  concerning
  Iain

  Hello

  I read a few topics on missing icons in the system tray. It seems that it s is a windows bug.
  Please check these messages from the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14392
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15065

  Maybe it helps.

  I can t say too much on the matte screen. Of course, if the Fl inverter is dead the display appears dull but you issue sounds a little different. The problem doesn't persist all time. That's why I think that it s not a frequency inverter. Usually, the Toshiba power saver is responsible for the brightness of the screen. You should check the settings of the single power supply modes. Maybe you switched between different modes of energy and the brightness of the screen has also been changed.

• . Exe missing DAQmx subVIs

  Hi all

  I built an installer for my .exe. I have included:

  1 OR LabVIEW Run-Time Engine 2012 SP1

  2 NOR-DAQmx Base Runtime 9.6.2

  3 NOR-DAQmx Configuration MAX 9.6.2 Support

  The computer I did the VI is a Windows XP computer. The computer I want to run the installer is a freshly installed Windows 7 machine. When I try to run the installer, I get the following error:

  Missing Subvi DAQmx create Task.vi... lack of sub - VI DAQmx create channel (TEDS-A1-tension-Basic) .vi.... Missing Timing VI (sample clock)... Missing control task.VI... Missing clear task.VI... Task.VI stop missing... Lack of function external nilvaiu.*AQReadNChanNSamp1DWfm:C...

  Looks like I'm missing VI DAQmx, yet I've included DAQmx in installer.

  Thank you.

  I know this sounds like a stupid question, but have you run set - up.exe volume? You can open MAX on the target machine?  If Yes, what are the software components are listed?  Did restart you to complete the installation?

  My 8-Ball is screaming that this is a simple mistake that will involve a time .

• require external dll function prototypes

  Greetings,

  in the compilation of the CVI Options, I checked "function prototypes require" because I think it's a useful security measure. The project includes about 30 files that all work fine except one that relies on the functions provided by an external DLL.

  As a result, these function calls are not prototyped and I get the error 'missing prototype.

  I could imagine two solutions:

  -find a way to functions external prototype

  -exclude a file of this compilation option

  I prefer the first version and doubt that the second option is possible.

  So here's how to use the DLL:

  a typical function call looks like this: (* ext_dll_Continue) (instrument);

  where the address is obtained through ext_dll_Continue = GetProcAddress (ext_dll, "Continuous");

  and ext_dll_Continue has been defined as

  FARPROC ext_dll_Continue = NULL;

  Help how prototype such a function call would be most welcome - thanks!

  Wolfgang

  I do this kind of thing all the time in the CVI. I use the following general method:

  typedef __declspec (dllexport) int (* pfint1) (int); This definition corresponds to that in the .h file

  pfint1 continue;                                    This will be our reference to the external function

  Continues = GetProcAddress (pfint1) (dllHan, "Continuous"); dllHan presumed valid here

  Val = continue (param);                             Call the function in the dll

  Presents all works without warnings. (Prototypes required box ticked.) Of course, you can present different typdefs for the various models of different prototypes that you plan to use.

  JR

• nested to perform DML and wait function call commit

  Hello world
  
  I would like to make a few DML - one insert statement, to be precise - in function and have the function and then return the number keys on the newly added row. I call this function from a different context and woud then be able to use the newly added data to do something.
  
  Specifically, what I do is the following: I have a graph composed of triplets source, destination and distance in a picture. A user should now be able to
  
  1.) add a node "A" to the curve.
  2.) add a node 'B' to the chart
  (3.) to get the shortest path from A to B in the graphs.
  
  I have an internal function

  function INSERT_NEW_NODE(node_in in sdo_geometry, graph_in in integer) return integer
  is  
  
  pragma autonomous_transaction;
  
  cursor node_cur is  
    select 
        source,
        source_geom
    from graph  
  ;
      
  cursor edge_cur is
      select
          source,
          destination,
          distance,
          edge_geom
      from
        graph
      where
        sdo_geom.relate(edge_geom, 'anyinteract', node_in, .005) = 'TRUE';
  
  begin
  
    -- check if identical with any existing node
    for node_rec in node_cur loop  
      if sdo_geom.relate(node_rec.source_geom, 'EQUAL', node_in, .005) = 'EQUAL' then
        return node_rec.source;
      end if;
    end loop;    
    
    -- get edges
    for edge_rec in edge_cur loop
       -- new_node-->edge.destination and vice versa
      insert into
        graph
        (
          ID,
          GRAPH,
          SOURCE,
          DESTINATION,
          DISTANCE,
          SOURCE_GEOM,
          DESTINATION_GEOM,
          EDGE_GEOM
        )
      values
      (
        graph_id_seq.nextval, --id
        graph_in, --graph
        morton(node_in.sdo_point.x, node_in.sdo_point.y),  -- source morton key
        edge_rec.source, -- destination morton key
        sdo_geom.sdo_distance(edge_rec.source_geom_marl2000, node_in, .005, 'unit=M'), -- distance
        node_in, -- source geom
        edge_rec.source_geom,  -- dest geom
        split_line(edge_rec.edge_geom_marl2000, node_in).segment1 -- edge geom
      );
      commit;
      --new_node-->edge.source and vice versa
      insert into
        gl_graph
        (
          ID,
          GRAPH,
          SOURCE,
          DESTINATION,
          DISTANCE,
          SOURCE_GEOM,
          DESTINATION_GEOM,
          EDGE_GEOM
        )
      values
      (
        graph_id_seq.nextval, --id
        graph_in, --graph
        edge_rec.source, -- source morton key
        morton(node_in.sdo_point.x, node_in.sdo_point.y), -- destination morton key
        sdo_geom.sdo_distance(edge_rec.source_geom, node_in, .005, 'unit=M'), -- distance
        edge_rec.source_geom,  -- source geom
        node_in, -- dest geom
        split_line(edge_rec.edge_geom, node_in).segment2 -- edge geom
      );
      commit;
    end loop
    ;
   
    return(morton(node_in.sdo_point.x, node_in.sdo_point.y));
    
  end insert_new_node;

  adding new nodes to the chart, links, calculates distances etc. and returns a handle to the newly added node. I call this function twice function, external

  function get_path (line_in in sdo_geometry, graph_in in integer) return sdo_geometry
  is  
  
  source number;
  destination number;
  source_geom mdsys.sdo_geometry;
  destination_geom mdsys.sdo_geometry;
    
  begin
    
    source := insert_new_node(get_firstvertex(line_in), graph_in);
    destination := insert_new_node(get_lastvertex(line_in), graph_in);
   
    -- source := insert_new_node(get_firstvertex(line_in), graph_in);
    -- destination := insert_new_node(get_lastvertex(line_in), graph_in);
    
    return(get_path_geom(source, destination)); --returns a geometry which is the shortest path between source and destination
    
  end get_path;

  ; and I think thatI have to use autonomous transaction in the internal function, so that the external function can see any changes made by the inside one. However, it doesn't work, when I call twice the function internal (i.e. remove the comment panels in front of the last two lines of code just before the return statement in the outer function.)
  
  So here are my questions: 1) why should I call the function twice to see the complete transaction? (and 2.) How can I avoid this? Is it possible to wait for the execution of the return statement in the internal function that the insert is committed and can be seen by the external function?
  
  See you soon!

  OK, here's the solution: the external function get_path() calls a function get_path_geom(source, destination) , who himself called something like table(dijkstra(source, destination)) , (omitted by me because only carefully tested and ok, my bad!) which makes the job of finding the shortest path and returns an array in pipeline. It turns out that this feature for some reason is not the scope of the external function and therefore does not see the transaction committed themselves on the graphics table. After you change the dijkstra() -function to return a list instead of a table, all works all of a sudden.

  If this question has been answered; I would still like to know why the table function does not have the same scope as the rest of the transaction.

  Edit: removed misleading blame on application external and inserted a correct solution.

• Use file/class external actionscript "Basic."

  Hey all,.

  I'm a little baffled by something that should, IMHO, be a piece of cake...

  The installation is really easy. A simple application with a single textinput, a button and a text component.

  When we click the button a function is called that sets the text of the inputfield in the text element.

  Code:

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"> "
  < mx:Script >
  <! [CDATA]
  public void click(inputText:String):void {}
  outPutTxt.text = inputText;
  }
  []] >
  < / mx:Script >
  < mx:TextInput x = "10" y = "10" id = "inputTxt" / >
  < mx:Button = "178" x = "10" label = "Button" id = "Btn" click = "{click (inputTxt.text)}" / >
  < mx:Text = '251' x y = '12' text = 'Text' id = "outPutTxt" / >
  < / mx:Application >

  As I said, really easy.

  What I want to do is put the 'click' function in an external actionscript file or class. And be able to continue to, of in the external file, change things outPutTxt.

  I am aware that I could create a public variable can be bound inside the external file and how to bind the outPutTxt to this variable, but I really wish I could 'just' forcing the value...

  Is this possible? If Yes: how plix

  If it is not possible, I would like to know as well! And in this case, how I can re - use the same instance of a class or a file in several separate components? I am a 'login' thingie where a user connects (data stored outside in an actionscript class/separated file) and I want to reuse the information on other pages... Or this is done automatically?

  All the comments and answers are highly appreciated!

  Pieter

  I'm not quite clear on what exactly you are trying to achieve, but here's what I got:

  There are several ways to separate things like that, but I'll write two of them

  (1) If you put the function externally as a file, not a class, you just simply includethat as file in this mxml and you're nothing extra is needed

  (2) If you have an external class

  for example myclass you do next:

  MyClass {}

  public void click(inputText:String):void {}
  This ["outPutTxt"] .text = inputText;
  }

  }

  then in your mxml:

  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
     
          

  private var myClassInstance:MyClass = new MyClass(); / / or isntantiate just as you wish, in creationCompete etc,...

  ]]>
     
     
     
     
  

  have not tested, but should work.

  on the sidenote: I'm not sure why would you need to do, if specify you your question could be useful.

• AT300 recognizing only not SD cards restarted.

  Hi all.

  Recently got a Tablet AT300 largely because the SD slot full size (a rarity in tablets). My intention was to load images from an SD card in my digital camera directly on the Tablet, however encountered a strange problem.

  When I put a card camera SD in the SD slot, the Tablet does not notice it unless I can put the Tablet market again. When I put the card in, the section of 'Storage' shows only the internal storage - external SD card appear not at all. However, if I reboot the tablet with the SD card still in it, she then "notice" the SD card and entered storage (with option to 'disassemble').

  It seems that it will only detect and mount an external SD card * if * the card is in the Tablet during startup. Don't know if it's all simply down to a lack of functionality 'plug-and-play"in the Android operating system or something else - if it is a fault with the unit, I need to know, so it can be returned during the warranty period.

  Any help would be appreciated.

  Hello

  I think that it is a usual procedure for Android devices.
  The device must be turned off before inserting the SD card.
  I have an Android smartphone that support the mini SD card.
  The phone should be turned off until the SD card is inserted.

  Then if you want to remove the SD card, you must first take it apart.
  Go to applications-> the settings-> storage-> Unmount SD card
  Then you can remove the SD card in the slot!

• Qosmio G20: Possible boot from a USB device?

  Dear all,

  I am writing for you good people was whether it is possible to start a Qosmio G20 via a connected USB device, an external hard drive.

  I wonder if it is taken in charge (or tolerable) within the limits of the current Qosmio G20 BIOS and/or if any could attempt on my part to make taken in charge (i.e. are there buttons I can push levers, I can pull or numbers I can play to get there).

  The reason why I have is that my laptop has a multitude of technical difficulties that point to the hardware failure, among them a vertical line on my screen and a problem with my optical drive, making it impossible for me to write a CD or DVD.

  In the unlikely event that the good folks at Toshiba support are forced to replace the hard drive (or the system) it would be nice to have a way to restore the system to its current configuration (in this sense, I'm looking for a way to create my own bootable recovery disc produced) however the lack of functionality in the Department of optical drive ties my hands a little (I can't create a recovery of) product custom CD/DVD but I might create a product on my external HARD drive recovery partition).

  Thus, it would be useful to be able to boot from a USB, not essential of course as any disk image could be comfortably written to disk through my soon-to-be renovated system (of course it would be quicker to start just by the USB bus and avoid all this nonsense).

  Sincere greetings,
  Lee Hyde.

  Hello

  I am sorry to say that you will not be able to boot from the external USB HDD. The BIOS does not support this feature.
  According to different threads here in the support of forum Toshiba Qosmio G20 BIOS supports these devices to start:
  Floppy USB drive, 1st/2nd HDD, ODD, network (LAN)

  As you can see it s possible to floppy USB FDD but not the USB external HDD

• How to create an ISO image of the system, windows 7 pro 64-bit disc?

  my laptop (hand me down) is prone to temper tantrums and I have just recently recovered my OS (windows7 pro 64 - bit SP1) OEM Vista - win7 HP x 64-Win7 Ultimate x 64 - back to HmPrem - and now my current installation. Beware parents unwittingly give you their headaches, that is to say: computers without the product keys and scratcthed inst DSK. With the history of this machine, it would be prudent to take measures to protect my computer from that dreaded "Startup Repair cannot fix your computer automatically.

  So I have this sense of urgency to get a viable backup for my computer. So far, I have had experience notoriously bad restoration of backups of flash and CD - r discs, etc. Seriously, I don't want to buy an external hard drive and online storage simply scares me.

  Can someone help an old man get reliable directions to the road straight to create a secure environment before you create a system backup image?

  Thank you and good hiking.<><>< how="" quaint="" is="">

  EN

  (a) I seriously don't want to buy an external hard drive.

  (b) to create a safe environment

  (If you insist on one) then you can't do b).

  To create an image, you have two options:

  • Use the tool to create native images (which creates a .vhd file, not a .iso file). It works but it is immature, lack of functionality and is capricious.
  • Use a third-party product. Some of them cost money.

• Safari 10.0 no minimum font size setting

  Just downloaded Safari 10.0 on my Early 2011 Macbook Pro and there is a remarkable lack of functionality: definition of a minimum font size. The setting seems to be replaced by the percentage of zoom of page that is not as useful for me. Anyone know if Apple has just moved this setting or if it is gone for good?

  It seems that he's gone.

  You could try a different resolution in system preferences > monitors > display > chipped.

  Or system preferences > accessibility > Zoom.

• Does anyone use iCloud for everything?

  Does anyone use iCloud as your main service (i.e. for synchronization, documents of cloud and primary email address)? I mainly use it as my primary service, but finds that she has its drawbacks, especially when it comes to Mail and web messaging on icloud.com - it is a bit old and lack of functionality.

  Wonder if anyone has experiences and possible suggestions to fix/improve the service?

  I use my account for all iCloud. It is my main email account, iMessage account, allows you to synchronize my calendars, is my main calendar, synchronize and stores my contacts, contains most of my personal documents (although I also use the box, Dropbox and OneDrive).

  I had no problems with it. What features Miss do you? I rarely use iCloud.com. I mainly go there through the apps on my iPhone, iPad, Apple Watch and Mac.

• TAB GROUPS die after closing the window, restoration of session does not apply and neither is history! I do not think that I have been warned!

  On leaving firefox, update, then restart, I lost the ability to restore sessions. I restored the Group of tabs in the past; It's different. My tab groups are lost forever and I don't remember even be warned about losing when the window is closed (as often happens and then I avoid close it.)

  I sync my tab groups, but she must have sync'd their disappearance because I lost. Tab groups really should have always been separate from the window (as a form of records) - I don't know why I found myself never adopt this powerful feature knowing how bad it has been supported. I had actually named groupings with 2dont reading lists etc... the year value of groups... and I shared it between devices...

  In fact, I watched the sessionstore.js file, it seemed ok - I do javascript professionally. I think I can close this because there seems to be a lack of functionality/design of browser that we can solve a problem. my other computer did the same thing with clamping my tab groups and the closure of the window... it's a "feature" not a bug. I thought that maybe someone knew something that I do not have as to why this is so wrong.

  I'll just have to live with attention restore or restore backups the sessionstore.js if for some reason, he gets lost. Including me accidentally close the window and press on enter without thinking (Yes, I get that I can restore; but the problem is that I wouldn't restore groups of tabs because they are so easily killed in multiple ways.)