LAN at impact software GPIB controller

Similar Questions

• For the USB Hi-Speed and Licensing policy GPIB controller

  Hello

  I wanted to confirm understanding licensing NI VISA.

  If I use the GPIB controller OR to the USB Hi-Speed, is NEITHER VISA license are included?  488.2 NOR pilot is that CD is included along so I guess its license.

  In accordance with the licensing policy as long as you are using hardware NOR the license included.

  Here is the sentence that does this is clear.

  "Are examples of products that include the driver NI-VISA LabVIEW, CVI, TestStand, NOR-488. 2, GPIB controllers, PXI controllers, etc. If you do not use a software or hardware, you can buy NI-VISA development software separately. »

  If my understanding is 488.2 and NI-VISA OR license is included if you use the NI GPIB for Hi Speed USB controller.

  Thank you

  ANI

  It's true and you can deploy a runtime of NI-VISA smaller with your executable file.

• How old, a driver can be used with the USB-GPIB controller?

  Hello, I have a litter of Nicolet who I'm trying to control using an NI USB-GPIB controller and a Nicolet provided the program. The software were made in 1995 and told me it was made to work with the NI AT-gpib cards and I would need to use a pilot more OLD, BUT I don't have access to one of these cards for a purchased a USB-GPIB, hoping that it would work. A pilot more FORMER will support the GPIB-USB?

  Sorry for you, but not

  This is a really old software and works only on the driver to the gpib.

  Written in LabVIEW software would go from before this date.

• Windows 8 pro and windows 8.1 pro 64 bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller

  Hello

  I have a HP Pavilion GP A10 AMD laptop 2313-AX. The latest drivers from the HP website for windows 8 pro and windows 8.1 pro 64-bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller appear limited in my laptop, but in the same laptop connectivity when I start in Windows Server 2008 R2, both LAN and wifi works very well.

  Are there drivers available updated 2013 for these two hardware devices as dated?

  Are there universal or generic drivers that can act as a workaround?

  If so, please give me the URL for the same thing.

  Kind regards
  Sriram.

  Hi Steve,.

  I came across similar issues where the driver manually enabled users to solve the problem. Uninstall the current network adapter drivers and manually install drivers that you previously downloaded.

  a. press Windows key + R key, type devmgmt.msc, hit the Enter key to open the Device Manager.

  b. expand network adapters, right-click on the listed network adapter and select Update driver software.

  c. click Browse my computer for driver software, click Let me pick from a list of drivers for devices on my computerand then click on disk.

  d. in the dialog box to install from the disc, click Browse, locate the drivers, and then click Open.

  e. follow the steps described in the DeviceName update driver software dialog box to update the driver.

  Try these steps and let us know the results.

• Can you change the type of device to 'USB Raw resource' to GPIB controller?

  I'm trying to configure a GPIB FL Contec GP - IB (USB) controller in MAX.  I could so he can register through the creation of a pilot of the Assistant driver VISA, but it fits as a "gross resource USB" rather than as a GPIB controller.  I can send and receive information from the controller, but it does give me an option to search for connected devices of GPIB communicate with them.  Is it possible to change the type of the device, maybe by manually changing the driver created by the wizard of the NI-VISA driver?  Thank you for your time.

  N ° do not use MAX at all. You can just create a GPIB-USB controller on your own. You should contact the seller.

• If I use my like my DAQ GPIB controller to control my instruments?

  Hi, I am a beginner in BT and need your help for dead on my undrestanding clarification:

  Suppose I want to control 7 instruments (such as temperature sensor, osciloscope,...), instruments using my GPIB controller, in other words, my pieces as my DAQ GPIB (am I right this step?) doesn't not need to communicate between them, but whenever I read the temperature value, I'm doing some calculations in my code LV and then decide what changes apply to instruments for example reduction of the frequency of the signal generator , pls I would like to know if I have done my DAQ correctly? (I mean if the GPIB controller acts as my DAQ) then comment how to decide what kind of GPIB is suitable for my work

  I really need your help,

  Thank you

  elahetal,

  If you have all the tools you need, you now have the following equipment (to summarize)

  (1) to a computer.  It must be decently fast, especially if you order 5 + machines, but it should not be surprising.

  (2) a GPIB card that works with your computer (PCI slot or PCIe, etc.).  I HIGHLY recommend a NI GPIB card, especially if you use it to write a labview program.  3 party cards can complicate your life village.

  (3) GPIB cables to each machine (if you have 2 computers, there are 2 cables).  If a machine is not a GPIB connector, it can not be controlled of GPIB.  There may be a RS-232 or USB drive.  These connections need not a GPIB cable, they need their respective cables.  Some machines also cannot be digitally controlled.  A DMM from the 1960s is probably not the connectors or the internal hardware to be part of your installation.  Make sure that each piece of equipment can be controlled by the computer

  Things I would do to get started on your code LV.

  (1) download the drivers for each instrument.  The drivers are code LV, when it is executed, allowing you to communicate with your instrument.  Some drivers are pre-assembled with interfaces that resemble your machine controls, others come with orders but no interface.  The quality of each driver can vary.  If there is no such thing as no driver, reading extensively the manual of the instrument and the protocols of the connection you are using (GPIB, USB, etc.).

  (2) get each work unit separately.  If you can get each device to be controlled entirely by computer, you are 80% of the way.  This can take a long time.  I know that I took several weeks to get each device works correctly.  Once, you have separate codes and know that each device can be controlled by the computer (or only dump information), then you are ready to code.

  (3) build the master code by bringing together the different parts.  If you think of him as Fortran or C programming, it becomes very easy.

  Regarding semantics, data acquisition is the whole plant; instruments + computer + GPIB.  Your computer is the controller and the bus is the GPIB cables where are transmitted data, commands and responses.  Read up on it.

• Using Agilent USB-> GPIB controller possible

  Hello

  When I have an Agilent USB-> GPIB controller so normally, I have to install the Agilent IO libraries for the windows driver.

  What should I do when I want to use the USB-> GPIB controller in Labview? There, I have NEITHER - MAX-> is the driver included in MAX or what I have to install both programs?

  thx for the help

  No, when you use a controller of NOR, you must NEITHER-488. 2. remember, the VISA is just one api that is above the actual hardware drivers. There is a specific hardware for the controller of Agilent driver and a driver of specific material for a controller OR.

  Where the driver is depends on your version of LabVIEW. On my 8.6 distribution, there is a separate DVD called NI Device Driver DVD.

• LAN - installation of an Ethernet controller

  Hi all

  I know, this issue has already been discussed, but after all, my attempts to make my card Ethernet works correctly, I decided to ask someone who had the same problem and actually reached the happy end. ;)

  So, I reinstalled Windows XP on my laptop, but with Windows XP Professional Edition. After the reinstallation of the OS, I as much as possible followed installation steps according to the content and the Installation so that Windows XP.

  Problem is, there is not any software listed on the support page. But the greatest is, the Ethernet (LAN) card, there is no binary executable installation to install the LAN Driver.
  On page mentioned, there are two available pilots, one of 100LAN Intel and the other of the GLan Thoshiba, but as you can see below, I found there only PROUnstl.exe executable file and have no idea how the Ethernet card work, without relocation to the standard edition using recovery CD and drivers CD, create tools and. Back again.
  Y at - there someone who can help me with my problem?

  Thank you very much for the support

  Kind regards

  jV

  The driver 100LAN package content:

  2005-10-11 20:30 e100a325.inf 199 680
  2005-10-08 01:26 199 269 e100ant5.inf
  2005-10-19 14:03 33 791 e100b325.cat
  2005-05-19 17:38 5 178 e100b325.din
  2005-10-13 23:39 292 274 e100b325.inf
  11/10/2005 12:31 AM e100b325.sys 163 328
  2005-06-16 17:48 36 864 e100bmsg.dll
  19/05/2005 17:51 5 182 e100bnt5.din
  11/10/2005 12:37 AM 152 336 e100bnt5.sys
  2005-06-15 08:08 20 480 NicCo32.dll
  2005-05-19 17:28 21 504 NicIn32.dll
  2005-06-15 23:27 126 976 PROUnstl.exe
  03/01/2006 19:59 159 TVersion.xml
  2005-10-19 18:19 13 verfile.tic

  Content of the GLan driver package:

  2005-07-07 02:12 e1000msg.dll 163 840
  2005-07-14 02:06 2 792 e1e5032.din
  2005-09-15 03:23 172 544 E1e5032.SYS
  14/10/2005 12:31 AM e1e5132.cat 14 286
  2005-07-14 02:06 2 790 e1e5132.din
  2005-10-07 02:45 e1e5132.inf 184 583
  2005-09-15 03:24 E1e5132.sys 179 200
  2005-06-23 20:59 17 408 EtCo32.dll
  2005-09-28 15:41 9 157 iamt.cat
  2005-06-29 20:57 2 570 IAMT.din
  2005-08-21 17:32 31 802 IAMT.inf
  2005-08-21 17:31 32 256 IAMT03.sys
  2005-08-21 17:32 39 040 IAMT2K.sys
  2005-08-21 17:31 38 528 IAMTXP.sys
  2005-09-28 15:41 7 449 iresol.cat
  2005-06-20 12:48 10 946 iresol.inf
  2005-06-15 08:08 20 480 NicCo32.dll
  2005-05-19 17:28 21 504 NicIn32.dll
  2005-06-15 23:27 126 976 PROUnstl.exe
  03/01/2006 20:00 150 TVersion.xml
  2005-10-19 18:19 13 verfile.tic

  I put t really know if the creation of the second topic with the same description of problem has any meaning. If anyone has a solution, it will be better to post on original issues with all the other comments and discussions.

  I can't find any other subjects because you have probably changed your nickname. By the way: how to help when you didn t write which laptop model you have?

• Using NI USB-GPIB controller Zeiss C90 CMM control

  I have a Zeiss PCDMIS CMM running 32-bit on Windows XP with PCI GPIB (488.2 2.7.3)

  If the controller is 8 bits, but work with my 32-bit system already, can I export the config VISA file, change on a 64-bit of Windows 7 with a USB to GPIB computer, and import this file into a newer version of the driver 488.2?  (change of bits or a more recent version of 488.2 will be a problem?)

  Hi Ryan,

  As long as you save this export config file, you should be able to load it into the second computer MAX.  I can't find anything that says that there will be problems with the little change.  If you are really worried about it however, give it a try without getting rid of your original computer.

  It seems that you already know how to transfer the settings above, but here's a KB on how to do this http://digital.ni.com/public.nsf/allkb/BF528312C9A5423A862565BC00731EC0.

• OR MAX see GPIB controller/board of Directors, but crashes on test/Scan troubleshooting

  Hello

  I have a new PC (Win7 64 bit) with a new GPIB PCI - E card and NI-VISA 14.0 (later). I can't get the map to 'do' something - he's not troubleshooting auto test, or search for instruments, and the ibfind in an interactive control command does nothing (they are all "don't hang up" no error reported). What is happening with two identical machines, each with the PCI-E card. My 6 monts test machine there is works very well, but it is 32 bit and has a different chipset/firmware of the provider (which was not planned, we ordered the same model, but the seller seems to think that it's little, they kept the model the same number).

  Any ideas on what to do? I demoted NI-VISA a couple of times already, and Windows reports gladly driver card / work properly. GPIB options all seem normal in case of default (GPIB0, controller of system activated, etc.).

  Thank you very much for your suggestions!

  -Rick

  Hi rnelsonee,

  Make sure you also have the NOR-488 driver. 2-day so you can communicate with GPIB devices correctly. You can follow this link to download.

  http://www.NI.com/download/NI-488.2-14.0/4802/en/

  If you still have questions, could you let me know what kind of errors you get when you fail the self-test NI Max? All codes error or screenshots you can provide will be useful. Thank you.

  Paul C

• software game controller for precision sidewinder pro for windows XP

  I can't find the game controller for windows XP software. I've looked everywhere but can't find on your web site at all,
  can you help me to find it.

  Do you mean Microsoft game controllers?

  http://www.Microsoft.com/hardware/gaming/gaming.mspx

  If others, we have all the info on brand and model, probably need - on the back or the bottom controller Rob bike

• GPIB controller "sre 0.

  I have an application LabVIEW 7.1 interfaces via GPIB (488-2) with a panel of Interface Ruska 6005.  Essentially, there is no problem. However the author has used "sre 0" at the end of the program for unassert REN and return control of the operator interface, but the interface remains in computer mode and is not available for manual operations.  Can someone suggest why?

  Hi John,.

  Are you using the API VISA or 488.2 API?

  Would you be able to post a screenshot of this part of the code?

  Have you tried to write a code to see if this function will work or not simple peace?

  Please see this link.

  http://zone.NI.com/reference/en-XX/help/371361B-01/lvinstio/visa_gpib_control_ren/

  Does this sound familiar?

  Kind regards

  Sammy Z.

• vxlan lan through the other domain controller

  I can create a vxlan on different data centers, or must be the same data center and different groups?

  I have 3 data centers with all the different VLAN on each. I wonder if I can migrate a virtual machine, even from dc1 to dc2 and keep the same IP address using vxlan

  Thank you

  VXLAN brought network are the breast of a data center (while you perform preparation VXLAN at the data center level), so it is not possible to expand on a virtual wire across domain controllers. vWires can extend it on different groups within a domain however controller.

• Can I use the VXIpc-872 as GPIB controller for the slave VXI mainframe?

  Is this possible? Which means that if I can control a chassis VXI from a PC through the VXIpc-872?

  If this is possible, what should I do to put in place?

  Hello

  So as I understand it, you want to control your VXI PC chassis, connecting via the VXIpc card? What operating system is your VXIpc-872 race? You can probably use remote desktop to connect to your VXIpc from your PC. You can take a look at these articles:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4731

  http://digital.NI.com/public.nsf/allkb/C074C33F4DE3FA5186256D3D007788DA

• NOR-488 command requires GPIB controller charge controller

  I need your help, if you please! I added a few cases to a case structure and my program works very well. When I want to rebuild or build an exe again, I got error message attached. The solutions mentioned in this area and other platforms did not help. I don't know what to change because the program works very well, but I can't build

  Thanks to the support OR! There was a folder that had references which are no longer available on the hard disk. I've updated this file and reconstruction didn't work