vxlan lan through the other domain controller

Similar Questions

• I had Mac Adobe Acrobat Pro (October 12, 2013) I tried the new domain controller and now my Adobe Acrobat Pro is gone how can I go back? I don't like DC

  I had Mac Adobe Acrobat Pro (October 12, 2013) I tried the new domain controller and now my Adobe Acrobat Pro is gone how can I go back? I don't like DC

  Hey leonardg88213387,

  Please post on the Adobe forums.

  Could if it you please let me know what exact version of Acrobat you are using.

  If you were using XI of Acrobat, you can check the doc KB below link:

  Adobe Acrobat DC uninstalled Acrobat XI | How to get Acrobat XI

  OR, if there is another version, then uninstall the DC version and install the version you want from here:

  Other downloads

  Hope that helps.

  Kind regards

  Ana Maria

• Authenticate users in the other domain Windows

  Hello

  I'm trying to authenticate users in a different Windows domain. The correct version of the Remote Agent is installed on the domain controller. Director of company "runs" the service.

  I discovered that the group nesting is not working in version 3.3.3. Is this correct?

  I also have a universal and domain local group. In this group, I put some users in the domain, the trust.

  Authentication will not work: error on ACS: external DB account restriction.

  Also, I tried to do a group directly mapping in the trusted domain. When I click on 'Add Group Mapping', this is the error: "unable to enumerate windows... groups."

  How can I fix these problems?

  Thank you

  Remco

  Hi Remco

  Looking at the release notes under known issues in Cisco Secure ACS for Windows Server 3.3

  CSCei01730

  The EAP - TLS authentication to the trusted domain controller failed

  Authentication succeeded only when the customer the EAP - TLS to authenticate to the domain controller which connected directly to GBA, but when the user is in the ms trust (only in the ms trust) that linked to the first domain controller, the authentication has failed and has been the message of attempts fail: 'External account DB Restriction'.

  Same message is produced if the activation of the field stripping in database settings outside of Windows or not.

  CSCee13658

  Report of failed attempts for statement is not clear enough

  When the user validation fails for some reason any (external server is down, the right SSL certificate or key shift with NAS), attempts to csv report failed indicates that the failure of the authentication code is "restriction of account external db" or "CS password invalid.

  Workaround: this issue is cosmetic. No work around.

  Cordially MJ

• where is the highlighter? can find it on the new domain controller.

  where is the highlighter? can find it on the new domain controller.

  HI Maria,

  I can understand your concern & will help you with that.

  (1) Please open your PDF in Acrobat / Reader DC.

  (2) choose the right comment tool.

  

  (3) all tools comment will appear at the top as shown in the screenshot below.

  

  (4) select the one circled to highlight the text. You can also check the name of the tool to your mouse hovering over him.

  I hope this will solve your problem.

  In case if you still encounter any problem or have any questions please let us know. We will be happy to help you.

  Kind regards

  Nicos

• How to use artifacts from MDS repository from one domain to the other domain

  Hello
  
  I'm working on the Oracle SOA MDS repository. I created the Databased MDS repository to the local server's domain. Now, I want to use artifacts from local area MDS repository same in the other domain server (domain of Dev).
  I created the composite soa for it and tried to use artifacts from local area MDS repository and deploy soa composite in the field of the Dev. But I am not able to use repository artifacts MDS from one domain to the other domain.
  
  Please help me
  
  SOA 11 g: 11.1.1.5
  
  Published by: 850198 on July 4, 2012 02:26

  Hello

  You can specify where to look for MDS in adf - config.xml present in *\.adf\META-INF*.

  Change the section in the file above to your Local MDS Server.

  Kind regards
  Neeraj Sehgal

• How to force the domain controller to accept the new PDC after the orphaned domain controller

  Hey guys, have a pretty complex but simple problem.

  I had a my student domain PDC holder down. He worked to RID and infrastructure

  I was able to grasp the roles to another domain controller, so this new domain controller, allows the appeal is that DC1 is now PDC.

  However, I can't convince the other DC, such as DC2 and DC3, to make it the new pdc.

  When I run the netdom query I get

  * WARNING role owner is a deleted domain controller: CN = NTDS settings\OADEL etc.

  So actually, he knows that his pdc has been removed from metadata. Where is this hard information coded in adsi edit, and where I can edit to type the host name of the new pdc?

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Four express airport Wireless extends through the other, instead of directly through my airport extreme

  Hello

  I have a small question which I hope someone can help me with.

  I have an airport extreme that I use as base station, and since I live in a big house, I extended wireless network with four Airport express devices. I put express devices from the airport in mode "expand the network."

  The question I have is that two of the expresses correctly connects directly to the Airport extreme, but the two other go via the two expresses first and not directly to the airport extreme base station.

  I am worried that I have will lose speed because of this and wondered if I can implement all the features four Airport express way so they all connect directly to the base station and not by the other?

  Any advice would be appreciated - thanks.

  I am worried that I have will lose speed because of this and wondered if I can implement all the features four Airport express way so they all connect directly to the base station and not by the other?

  Apple "extend a wireless network" feature works on the strength of the signal, so the ideal situation would be to have AirPort Extreme, located within your home with each Airport Express located approximately the same distance from the AirPort Extreme around the perimeter of the House.

  Think of a 4-spoke wheel. AirPort Extreme would be the "hub" in the center of the wheel and located at the end of a ray separated from each AirPort Express Terminal. In this way, each AirPort Express connects directly to the 'hub' and expand properly.

  The question I have is that two of the expresses correctly connects directly to the Airport extreme, but the two other go via the two expresses first and not directly to the airport extreme base station.

  The two airport expresses which connect to other expresses 'extension' of the network are not all. They 'join' the network... so they could be used for AirPlay or a printer USB remote... but the Express do not 'extends' the network when he "joined".

  You will need to experiment with different places until you see all four expresses connect directly to the main AirPort Extreme.

  As loss of speed in the network is... whenever you try to extend wireless network, nearly half of the potential speed on the network will be lost in the process. It's just a character of the beast to the extension of a wireless network.

  You can avoid the loss of speed in the network by configuring each AirPort Express Terminal to connect to the main router using a wired Ethernet cable connection. There is no loss of speed at all through the connection Ethernet cable up to 300 + feet, so full power is stored on the network when you do it this way.

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/

• How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

  Hi team

  Hope you do well. !!!

  currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

  1 users will connect: user advanced browser on SSL VPN pop past username and password.

  2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

  3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

  4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

  This is my requirement, so someone please guide me how to set up step by step.

  1. how to set up the Radius Server?

  2. how to configure CISCO ASA?

  Thanks in advance.

  Hey Chick,

  Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

  http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

  Hope this helps

  Knockaert

• How to turn on the firewall on the primary domain controller (AD)

  Once I deployed AD and ADC (additional domain controller) for a single client. It worked well for 4 months. But now I sudddenly has received a call from the customer that the firewall of its DC broke down and could turn on the firewall. He said something like "error 1068: the dependency service or group could start" when I try to turn on the windows firewall. It's mission critical servers and quick responses are welcome.

  Hi Darpandeep,

  The question you have posted is related to the management of the Windows network and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  I hope this helps.

• Through the WAN backup controller?

  I have this design to implement.

  2 sites.  on the Wan, there are 3 layer communication.

  Site 1 access points, I want to have the Site1 controller PDC, but also I would like the exact same APs have backup controller the controller of site 2.

  I'm assuming that once I build the mobility between controller1 and controller2 tunnel, so I can go to controller1 locate access points, and under settings I can simply type the name of the other controller2 (backup-controller) located on the Wan.

  Makes sense?

  In addition when you deploy HREAP APs, PSA initially find the controller, and you change their profile to the local mode HREAP, am I right?

  Thank you and I would appreciate your response.

  I really don't know how I missed this post! Yes, you are 100% correct! This is the correct procedure.

  Let me know if this naswered your question!

  Concerning

  Surendra

• Problem connecting to the ESX Server in the Windows domain controller workstation

  Nice day

  I'm trying to set up a lab for the test server ESX 4 on VMware Workstation 7.1.1 running in Ubuntu 10.04 LTS.

  Basic configuration is such;

  Windows 2008 R2 AD domain controller

  IP: 192.168.9.103

  SM: 255.255.255.0

  DG: 192.168.9.1

  ESX1 host

  IP: 192.168.9.109

  SM: 255.255.255.0

  DG: 192.168.9.1

  Both are configured with Bridged networking in my computer. I can ping the system Windows 2008 in my Ubuntu system, but cannot ping the ESX 4 server.  I can ping the DG of the Windows 2008 system, but cannot ping the DG of ESX4 system. I ping the ESX4 server by IP address and name for itself. I added a DNS entry in Windows 2008 for the server, ESX4. I can't ping the Windows Server 2008 of ESX4 host.

  There is an entry in/etc/hosts on the ESX host to IP address and the name of the ESX host. If I look at/etc/sysconfig/network-scripts/ifcfg-vwif0 I see doing a show at the 192.168.9.255, IPADDR 192.168.9.109 in sysconfig there is an entry for the ESX host name thats right, pointing to the front door of 192.168.9.1 using GATEWAYDEV = vswif0, n - route shows 192.168.9.1 as the UG.

  All tests seem to indicate a problem with the default gateway that is used to communicate between these 2 VM.

  If someone could please provide suggestions as to where I could look, I would appreciate it.

  Kind regards

  powderskier

  AFAIK, you must enable Supreme mode for the virtual ESX using Linux as a host.

  See my notes http://sanbarrow.com/vmx/vmx-network-advanced.html

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Configure the 2 network cards in a VM for MPLS LAN and the other for internet

  Dear all,

  I have a HP Server with 2 NIC cards. ESXI 4.0 is installed and 3 VM was created in it. Initially that a NIC card was connected to the path of the LAN MPLS switch and another card NETWORK was not connected to the internet switch port.

  Each VM only had a single NIC in it. So I assigned MPLS IP LAN to ESXI host and VM 3 and everything worked perfectly.

  Now, I wanted to have the internet connection for my 3 VM. So I plugged the 2nd NETWORK card with internet port and added the second NETWORK card to the ESXi using the Vsphere client - & gt; configuration - & gt; Networking option. Now the two nic cards are ponting to the network of the virtual computer.

  I've added 2 network card to all 3 VM and assigned to the internet IP addresses to all of these NICs. order of MPLS and internet work at the same time, I removed the card NIC MPLS entry door and manually routed through route add command. After this MPLS and internet worked well in 1 VM.

  I tried the same thing in 2nd and 3rd VM but it failed. whenever I have add 2nd network card in the virtual machine, the first of this virtual machine network adapter does not work.

  I'm after the right approach? Help, please...

  Kind regards

  Ashok doriane

  If I understand correctly your installation, you connected the physical NIC to two different IP networks.  Then you connected these cards in the same switch-v on the server.

  This essentially fills two different networks at the layer level 2 layer 3.

  You want rather than the two networks remain separated inside the host.

  • create a new v-switch on the host

  • move the internet NIC v-switch

  • Move the second NIC on each virtual machine to this switch

  • Make sure that access to internet VM NIC is one with a default gateway on a virtual machine OS

  • remove the default gateway of the NIC MPLS

  • creating persistent static routes to the NIC MPLS for any affected networks it beyond the same subnet as the NIC itself.  Addresses on the same subnet will be automatically accessible. Just roads for those outside this range.

  Steve Puluka

  JNCIA-ER enterprise routing

  Enterprise JNCIA-EX switching

  Senior network administrator

  Liberty Dialysis

  http://puluka.com/home

• How to fix a particular area (a header) on the screen while I scroll through the other fields.

  I added labelfield as a header title display and other fields which follow.

  I want to correct the label header at the top that I scroll down.

  How can I make it possible?

  Another body fields aree added to a verticalfieldmanager that is added to the screen.

  put this labelfiled setTitle or setBanner

• PIX & lt; -> user policies VPN PIX and the Windows domain controller

  I've set up a star using IPsec VPN PIX network, all IP traffic is allowed to pass through.

  At the Center, there is a Windows 2003 Small Business Server.

  On remote sites, there is only Windows XP clients used by employees working remotely in the central office.

  Initially, I had a problem of authentication on the server, but I found a document suggesting the Kerberos setting to go to TCP instead of UDP and it solved this issue.

  Now, there is one problem remaining, I can authenticate and access the server resources such as file shares, I can connect to the server Exchange etc. But the client computers do not receive from the server group policies. The error message I am getting in Event Viewer Windows is Userenv id: 1054 - Microsoft suggestion is to check if the DNS works and works DNS, I can locate the DC etc. without problem.

  I tried to make LDAP queries on the server, and again, it works without problem.

  The NetBIOS resolution works very well.

  Basically, everything seems to work expect to get group strategies.

  Does anyone have any suggestions where I should look planned for the solution to this problem?

  Kind regards

  Flovin Olsen

  Here is a vbscript script you must run on every PC has the problem.

  -Cross-section below-

  Dim wshShell

  Set wshShell = WScript.CreateObject ("WScript.Shell")

  prefix = "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System\."

  prefix wshShell.regWrite & "GroupPolicyMinTransferRate", 0, "REG_DWORD"

  Prefix2 = "HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System\."

  wshShell.regWrite prefix2 & "GroupPolicyMinTransferRate", 0, "REG_DWORD"

  MsgBox "done."

  ---------stop cut -----------------

  Hope this helps