LAN lan 2 Easyvpn VS

Similar Questions

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Problem with LAN Express airport

  Hello

  I recently bought an Apple AirPort Express router and I have several problems using the Ethernet with the most active airport. The thing is with my old router, I could have been connected to the ethernet cable, while at the same time connected with a LAN cable to my Macbook (end of 2015). The old router would have generated a wifi connection, but at the same time, would have enabled internet connection by cable to my Macbook without the active WiFi. People could use WiFi at home, but the Macbook would be connected to the internet by cable (lan cable connected to the router)

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active. Currently, I have the ethernet cable connected to the airport and cable Lan also connected to the airport and the Macbook, but the internet will not work unless the WiFi is active. I would like to turn off the WiFi on the Macbook and always have an internet connection through the LAN cable that is connected between the AirPort Express device and Macbook.

  Thank you

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active.

  Is the Terminal AirPort Express the only router in the current configuration of your network? No matter, what is the brand and model of the modem Internet you have the Express directly connected by Ethernet? ... or is the Express connected by Wi - Fi to the modem?

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• iPhone 5 use with w - lan only?

  Hello, it is possible to use the iphone 5 without sim, with w - lan only? For the first installations, later with the sim card? IPhone 4 doesn't work without a sim card. Thank you

  You will need to have a sim card in the phone to activate when first implemented, after that you can remove the sim card and use it with wifi only.

• The LAN on an Express port still works as a LAN port when in mode "extend the Wi - Fi network"?

  Assuming that the current versions of all units in the airport:

  If you have an extreme as your primary access point, and you have an Express "extend a Wi - Fi network" mode, the LAN on the Express port still works as a LAN port?

  Yes. You can connect any Ethernet device to that port.

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• Wake on LAN - AirPort Extreme

  I'm trying to configure the Wake on LAN for my AirPort Extreme and Windows 7 PC, reboot with my iPad.  It works fine when the iPad is on the local network, but no power on the PC when I'm not on my network domestic.  I put airport to the port before 9 to the PC as directed, and made sure the PC has been configured to accept magic packets.  Any help?

  Apple wake on lan system is different... and there is a good chance the router from Apple not go to work.

  The best and easiest around the issue is to install a different router... and use airport extreme for the wireless. Make sure the PC is connected to the main router although no airport.

  http://www.Neowin.NET/forum/topic/1186835-wake-on-LAN-WOL-with-Airport-extreme-2 013 /.

• Path of Time Machine LAN and WAN

  Hello

  are the possibilities to two paths setting in Time Machine?

  I need to connect different network in my LAN and WAN net.

  Lives

  If you are an experienced user familiar with the shell, you can add a unicast domain name or IP address to the list of destinations used by Time Machine backup. It will then use the server as long as it is accessible on the network. If it's a good idea or not depends on the circumstances.

  Find the verb 'setdestination' in the tmutil manual page (8).

• How can I change my LAN settings?

  I can't find the tools, is not there. So, how can I change my LAN settings.
  Or where can I find tools?

  You can press the ALT key, or press F10 to display the Menu bar.

  You can also find an Options/preferences button in the bar '3' Firefox dropdown menu button at the right end of the Navigation bar.

  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• Printer sharing via LAN - EPSON XP-335

  Hello

  We use 3 Macs connected via LAN (Ethernet, we do not use Wi - Fi).

  I have connected an EPSON XP-335 via USB to Mac #1, and it prints fine.

  On all Macs, I installed the software EPSON printing and active "Sharing printers", via preferences > sharing.

  but when I try to print from Mac #2 or #3 I get this message "not connected":

  

  What should I do?

  Thank you very much.

  Hi coxorange,

  Please use the Apple Support communities for help. From your post, I understand that you are unable to access the printer that is connected to one of your iMac, others in the House. I know it's nice to be able to print from all of your devices, so I'm happy to help you to provide advice for this.

  From the information you provided, it seems that there is some confusion about the way the printer is shared on your devices. In order to have a shared printer, you must only share from the computer to which it is connected. From there, you can connect to this printer with other computers. Perform these steps on the iMac to which it is attached:

  How to share a printer:

  1. Open sharing preferences if it is not already open (choose Apple menu > System Preferences and click Sharing), then check the box print sharing.

  2. Under printers, select the printer you want to share.

     When you share a printer, all users on your network ("everyone") can use by default. If you want to restrict access to specific people, go to steps 3 and 4.

  3. Click on the button Add at the bottom of the users list, and then do one of the following:

     • Select a user in users and groups, that includes all your Mac users.

     • Select a user from the network or users groups network, which includes everyone on your network.

     • Select a person in your contacts. Create a password for the person, then click on create an account.

  4. When you add people to the list of users, access to the shared printer is reset to no access for the users of your network ("everyone"). To provide access to everyone again, click the triangles, then choose can print.

  Source: OS X El Capitan: share your printer

  Once the printer is shared, you'll want to implement on your other computers. Check out the second section of this article, titled "Add a Wi - Fi or network printer":

  OS X El Capitan: Add or remove a printer

  If you continue to have problems with your printer setup, here are some additional articles that may help you identify the problem:

  OS X El Capitan: print troubleshooting

  Troubleshoot printer on your Mac

  I hope you have a great rest of your day, cheers!

• TC 1302 via a LAN cable?

  Hi, I have a new MacBook and replaced so access to my TC.

  The TC is installed within a university network via cable, and I still have the problem to get connected to the internet.

  I installed WLAN and it shows my network.

  However, I want to make my backup, which is not possible via WIFI, such as the TC is not properly installed in the internet.

  So I run the backup vial Ethernet/LAN cable.

  But I still have the problem:

  • where to plug the MacBook (I have a USB-Ethernet adapter for the retina of 13 MB) in the TC? The man or the host 3 ethernet Ethernet plug?
  • How can I tell my MB and the TC that the GET connected? (as I can't see the TC on my MB as device)
  • the reform through to get a proper backup?
  • and: does anyone have a tip for the installation of a TC in a protected University LAN/WLAN? who are the preferred settings? (I spoil in a point and I'm not fixed)

  Best regards, Steffen

  The TC is installed within a university network via cable, and I still have the problem to get connected to the internet.

  Most likely, your University has an Internet router at the other end of this cable. That would mean, you need to configure your TC properly in order to access the Internet. The best course of action is to speak with your University of departmental it to get this set up.

  However, I want to make my backup, which is not possible via WIFI, such as the TC is not properly installed in the internet.

  The TC has NO need to have an Internet connection to use Time Machine for backups. Your Mac has just need to be on the same wireless network that provides the TC.

  • where to plug the MacBook (I have a USB-Ethernet adapter for the retina of 13 MB) in the TC? The man or the host 3 ethernet Ethernet plug?

  It must be plugged into one of the three ports LAN (opposing arrows).

  • How can I tell my MB and the TC that the GET connected? (as I can't see the TC on my MB as device)

  In its default configuration, the TC will broadcast a Wi - Fi network that is not secure, with a network name of something like: Apple network NNNNNN. You just need to connect your MB to this network.

  • the reform through to get a proper backup?

  Sorry, but I do not understand your question.

  • and: does anyone have a tip for the installation of a TC in a protected University LAN/WLAN? who are the preferred settings? (I spoil in a point and I'm not fixed)

  Yes, talk with your University computer support staff.

• Lost my wireless with a lan cable connected

  I have an old Airport Extreme Base Station. Now I connect a LAN cable to connect the German Entertainment TV.

  The TV works and I continue to receive the signal from the airport but without data internet aka.

  If I disconnect the cable internet wireless lan working again?

  Where is my mistake?

  Dirk best

  Give us a screenshot of the configuration of EI when not working WiFi... and when it fails.

  Please click the airport icon so I can see the analytical parameters.

  Like this.

  

  What model is your AE?

  You can find the number of A1xxx on the basis or you can hold down the option key and double-click the icon in airport utility.

  The actual model will be displayed on the summary page.

  Then

  

  This modem do you have? Brand and model please.

  Is what type of broadband services?

• Can I use Thunderbird on a LAN if I use POP3 to get my mail?

  I use POP3 to bring my mail for a computer on my LAN. I have Thunderbird installed on this computer and all other computers on the LAN. I discovered a way for computers to access and act on mail that is on the computer that leads him to, but he is imperfect. Is there a good way to do this?

  If you run a mail Server on your network, everything is open because all mail is local and you can connect all the computers in the account on your imap mail server.

  Otherwise, you can use the IMAP protocol because it is and leave the imap folders to a local archive folder then like that will remove them from the server emails.