Problem with LAN Express airport

Similar Questions

• I have the ie3sh.exe problem on my laptop, can you tell me what I have to do and this causes a problem with LAN for internet

  I have the ie3sh.exe problem on my laptop, can you tell me what I need to do, and this causes a problem with LAN to the internet.  What happens on another laptop not this one.

  Hello

  ·        Which is exactly the problem that you face with iesh3.exe?

  ·        When you receive the error message that is related to iesh3.exe?

  ·        You did changes to the computer before the show?

  ·        This issue you are facing with internet?

  ·        What is the full error message that you receive?

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:  I would say as you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Post back with the required information so that we can help you further.

• Problem with SlingTV through Airport Extreme?

  I have a Motorola SB6141 cable modem, internet of Time Warner and an Apple Airport Extreme Base Station (later) for my setup. While SlingTV is not a great service, it was $ 20 a month and gave me what I need and has been much better than that Time Warner was in charge me for the same channels.

  Despite the problems of freezing SlingTVs or what not, for a while it worked. But one day a few months back it just stopped working. When you open the app, it either does not open or just turns and turns to be forgotten and never access the content. But if I try on my phone (Verizon LTE), or another network outside my apartment with the iPad or computer laptop, it works. So at home, I tried to go directly from the cable modem and right in the Apple TV (previously an Xbox) and when I do that it works. So really what it boils down to, is my Apple Airport Extreme Base Station router. If I'm either directly connected to the Airport Extreme Base Station (Apple TV ethernet to the router), it will not work, or if I use WiFi via the Apple Airport Extreme Base Station it will not work. But directly to the modem cable or on any network outside of my home, the service works.

  So in short, something about setting up Apple isn't allowing the Sling TV app to open or work on any device. I even did a rest of the plant and installing my Apple router once again, and the same problem persists.

  FYI - I use Netflix, Amazon Prime, Hulu and all the Apple TV, TV shows, rental movies and content without ever having a problem with opening or streaming. This only happens with SlingTV when you try to access content on any device (iPad, Apple TV, Xbox One, iPhone, Macbook Air) via WiFi or Ethernet via Apple Airport Extreme.

  I tried to provide all the little details that I could. If someone could please provide a solution I would really really appreciate it! Thank you.

  Well first of all try to port forwarding. Slingbox I guess would use a similar to SlingTV montage... Unfortunately when I google for it I see just people having so many questions like you... no rigging, no answer they give up.

  http://PortForward.com/English/routers/port_forwarding/Apple/AirPortExtreme/Slin gBox.htm

  It is the old airport of model, but the idea is correct.

  If you still have questions... There is a major problem... port 5001 is used by the airport for its installation...

  If I run a scan of port of network utility, that you will find that it is already used.

  Port scan started...

  Host port scan: 192.168.2.201

  Open TCP Port: 5001 commplex-link

  Open TCP Port: 5009 winfs

  Port scan has completed...

  My recommendation is to replace the airport as your main router... Something good market like the C5 TP-Link or the WR1043ND which is less than $50US. These routers use UPNP is missing on the airport. Continue to use the airport for your customers to apple as WAP and switch.

  BTW: this is no bad thing because you also have a known problematic modem... SB6121 and SB6141 have major problems... do a quick search and you can find a lot of posts about this.

  TWC has also now use IPv6... that can ruin.

  See the instructions for installation (same as comcast for TWC).

  http://mydeviceinfo.Xfinity.com/download.php?file_id=35

• Problems with LAN RJ45 Ethernet on Tecra A8 PTA83E link

  I experienced some problems with the onboard Intel PRO/1000 PL Ethernet adapter. The adapter in most cases works very well: it connects normally in 100 or 1000Mbps - full duplex - speed, depends on wich internetworking devices connected and the link has any problems.

  But, in some cases, with multiple Eth, the adapter devices involved the link at all, the Green LED on the right (link?) continually flashes with a delay of 2 seconds (0.5 "-1.5" wide) and the yellow on the left (traffic?) is always idle. On the other side of the Cat5e cable, the unit (now a Linksys WAG325N router) sign no link. There is NO cable problem.

  Windows (XP Pro, SP2) sometimes reports in the small icon of the LAN adapter on the traybar a driver connection established at different speeds (often 100 Mbit/s, but sometimes 1000Mbps!), but soon he returned to status "cable disconnected".

  I tried to upgrade the drivers directly from the pages of Support Intel because the support of Toshiba does not recognize my laptop (!), and because originally I did a downgrade to XP (I'm sorry, but I don't want to use the original MS Vista!), but nothing changes.

  The only way to establish a connection that I found is to manually reduce the speed (10 Mbps - full duplex) of XP driver advanced settings link. In this case, everything works, but a low speed.

  Can someone help me? Someone already noticed this problem?
  Thank you!
  Paolo

  Hello

  I m not very good if it isn't a cable delivers.
  Have you tried to connect the two devices using a crossover cable (cross cable)

  There are three different types of crosscable:
  -100BASE-TX-Ethernet 10BASE-T-und
  -100BASE-T4-Ethernet
  -Ethernet 1000BASE-T

  The difference is the use of pairs of crossed wires.

  However, the use of crossed cables is not necessary if you connect a router or switch device.
  But in case you want to connect two laptops, the crossover cable is required.

• Strange problem with LAN on Satellite P10 connection

  Since yesterday I get really annoying balloon popup (it appears at intervals a decade or less seconds:(qui dit: câble débranché, mais le réseau fonctionne très bien (avec quelques retards quand il montre)))
  I wonder is this a hardware in my laptop problem or a problem with the internet provider. I have Realtek RTL8139/810 x LAN card. I checked another cable and of the ToolTip always shows :(
  Help, please

  Post edited by: motomadness

  Hello Adam

  On this path, it is not easy to say anything. I recommend you test somewhere else to make sure if this problem occurs due to material.

• Problems with Outlook Express 6 in Windows XP

  Dear Sir or Madam:

  My friend has problems with his program of Microsoft Outlook Express 6 on Windows XP computer.

  He has saved all his program of Microsoft Outlook Express 6 e-mail messages.

  There are 2 e-mails corrupt in its Outlook Express 6 Inbox folder; He tried opening and remove these 2 emails corrupted in the Inbox folder, which causes the Outlook Express 6 program stops responding and freeze-up Windows XP. He had to click the end task to close immediately the program Outlook Express 6 is not responding in Windows Task Manager.

  It won't reinstall Windows XP on his computer from scratch.

  Please reply back soon.

  Thank you.

  Same question as above, except the deleted items that is now corrupted. Follow the instructions above, but this time remove Remove Items.dbx with OE closed.

  With all the corruption, you might want to consider a new identity that will give you all the new dbx files and a new registry hive.

  File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

• Problem with Outlook Express "Message has not been downloaded."

  I'm having a problem with emails and attachments removed once I open and view them.  More specifically, when I opened an e-mail message by using Microsoft Outlook Express 6 with an attachment, I am able to see the file and open the attachment.  However, when I go back to this same email one or two weeks later, I see the following is message "Message has not been downloaded" Outlook Express has not yet downloaded this message. »

  Please let me know what is the cause for this.  I have very important emails that have disappeared.

  In more of Bruce's response, if you lost messages (and it seems you if messages do not appear) and then check your Inbox for a bak file is a backup of the dbx file that you can restore.  See www.oehelp.com/OETips.aspx#2 and see point 4 on retrieving the messages.  I suspect the problem is due to having interference from antivirus software because it is probably what causes this loss, then see item 3 on this page also, as noted in Bruce.

  Steve

• Problems with Outlook Express (address book, mail open, etc.)

  Hi, I have a strange problem with my outlook express. The program opens ok, it synchronize the e-mail with the servers and so on. If you click on an email in the upper part of the window you can see the content below.
  Now, this is my problem, I can not doubleclick on an email to open it, I can't send an email or forward it. I can't open the address book.
  I get different messages, "it was not possible to open the address book, it cannot be installed correctly", "the message could not be opened, an error has occurred", "it was not possible to load the due address book that Outlook Express is not properly configured. Reinstall Outlook Express"and so on.
  I used this software for many years and the problem came from one day to the other. I tried to uninstall/reinstall the program from the Control Panel, I did a repair on XP installation, but it is always the same, is there anyone who has an idea (I know that Outlook Express is and old program, but it works very well for my needs).

  What about Nils

  First, try a new identity and see if that helps.

  You may have a damaged identity especially if it's the default main identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  An Outlook Express basic repair kit:
  http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx#ehh

  **************

  If the problem persists, start looking here.

  All of these errors have the same cause.  Something is screwed up with your address book.

  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook

  For more details, take a look at:

  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321

  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm

  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm

  Bruce Hagen MS - MVP [Mail]

• Problem with PCI Express Root Complex

  I bought a hp 15 t - j100 with Windows, but on windows 8.1 8.1 but I needed to change windows 8 and now I have a problem with the PCI Express Root complex code 28. The disks I have download for hp of the site http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=6521...

  I need help to solve this problem

  Thank you

  and I'm waiting for help

  Hello:

  You need this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• Problem with regular Expression

  Hello!!
  I have a problem with the regular expression. I want to validate only one word, and second are the same. To do this, I wrote a regex
  
  Model p=Pattern.compile("([a-z][a-zA-Z]*)\\s\1");
  Matcher m = p.matcher ("nikhil nikhil");
  Boolean t = m.matches ();
  If (t)
  System.out.println ("it's a game");
  on the other
  System.out.println ("is no match);
  
  The result I get is always 'there no match. "
  
  Your timely help will be very appreciated.
  
  Concerning

  Hello.

  You are missing a slash in the regex

  Pattern p = Pattern.compile("([a-z][a-zA-Z]*)\\s\\1");
  Matcher m = p.matcher("nikhil nikhil");
  boolean t = m.matches();
  if (t) {
      System.out.println("There is a match");
  } else {
      System.out.println("There is no match");
  }
  

• Problem with Application Express

  Hello
  
  I installed Oracle Application Express, but I have a problem with the connection of the first and the creation of my work space.
  When connecting using the username "admin" and as a user of the sys pwd because so far the only pwd I set when I installed Oracle Express 10 g and Oracle Application Express.
  When I go to the connection, the page seems not to take any command.
  I'm waiting for a help. Thank you

  Hello

  Hope this helps you

  Extract the zip install Apex in C:\temp
  After that, you should have the C:\temp\apex file

  Then to run in SQL as user sys
  @C:\temp\apex\apxldimg.sql c:\temp

  BR, Jari

• Problem with CASE expressions

  Using Oracle 10 g R2, plsql in SQL Developer (or TOAD). I have a question 'simple' with the criteria 'complicated' in where clause.
  So, it's something like this:
  
  Select the fields in a table
  where stuff like Upper(:CategoryId) | '%'
  and sub_category_id like Upper(:SubCategory). '%'
  and order_date > =: StartDate
  and order_date < =: EndDate
  and division_id =: Division
  
  Up to this point, the query works fine. Here is where is the problem:
  If there is a value in the following parameter field, it works very well, but it is possible that the parameter is null, then I have to test for this first, and if it is empty (or even assigned a 'false' value) then it must restore all settings. The following parameter field is titled: SKU. The reason why I do this first place is to spend several values in a field of single parameter - comma which is great as long as there is some values...
  
  (This works with the above)
  and INSTR (Upper(:SKU), table.sku) > 0
  
  And I have a similar problem with another field in the table entitled: catalogue and as: SKU, it works very well if there is at least one input value.
  
  What I tried (who doesn't) is therefore:
  and as table.sku (BOX WHEN: SKU = '1' AND '%')
  Of OTHER INSTR (Upper(:SKU), table.sku) > 0
  END CASE)
  Same thing with the catalog:
  and as table.catalog (BOX WHEN: catalog = '1' AND '%')
  Of OTHER INSTR (Upper(:Catalog), table.catalog) > 0
  
  There must be a way to make this work. I will be grateful for any suggestions that would help in my situation.

  What is

  select s.sku,
          s.std_cost_ea,
          s.unit_price,
          o.QUANTITY,
          o.order_no,
          o.order_line
  from f21.ffct_offer_product_sku s
  inner join f21.fmkt_order_detail o
         on s.sku = o.sku
         and s.company_id = o.company_id
         and s.division_id = o.division_id
         and s.offer_id = o.offer_id
         and s.offer_year = o.offer_year
  where s.category_id like Upper(:CategoryId) || '%'
  and s.sub_category_id like Upper(:SubCategory) || '%'
  and instr(Upper(nvl(:SKU,s.sku)), s.sku) > 0
  and instr(Upper(nvl(:Offer,s.offer_id), s.offer_id) > 0
  and o.order_date >= :StartDate
  and o.order_date <= :EndDate
  and s.division_id = :Division
  and s.version_no = 0
  

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• Strange problem with Toshiba Express Media Player on Satellite M115-S3094

  I am facing a strange problem in my Toshiba M115-S3094, which has been pre-installed with Windows XP Media Center edition and which also had the Toshiba Express Media Player.

  I had already done a clean install of Vista on it, and then I decided to go back to XP with my recovery DVDs. I did the same procedures of first installation Express Media Player to backup (that I did when I bought the laptop) and then installing Windows XP DVD de Toshiba Recovery XP.

  The steps included:
  1 deleted recovery Express media player disk partitions
  2. installed express media player
  3 extracted Xp Recovery DVD, by selecting 'Recover without changing the Partitions' (there is no expert mode)

  Everything was fine (i.e. installation)... But now, after the turning off my laptop I press the Express Media Center button, the logo "Express Media Player" appears on the screen after loading of closures of laptop for 5 seconds.

  I tried to open it again and again, but the logo is displayed for 5 seconds and then my laptop stop...

  Laptop works fine when I connect to windows by pressing the power button / stop.

  Can someone help me on this strange question... ?

  Hello

  The whole story is a bit confusing
  First of all, I would like to know if your laptop is already preinstalled with the Media Express Player and if you were able to use it on your laptop in the past.

  Now something about the Express Media Player installation;
  In order to use the media functions Express the Mediaplayer Express Recovery CD must be performed before performing the recovery from the recovery DVD-ROM products.

  In addition, on the HARD drive should at least 150-200 MB of free space available.
  This free space must be on the end of the HARD drive and there must be unallocated. To get these free space on party products 3rd HARD drive should be used as Partitions Magic 8.

  I m not 100% sure that on error ID system badly but maybe it corresponds to the DMI evil information stored on the motherboard. If we're not DMI, you will not be able to reinstall Express Media player using the recovery media express CD.
  In the DMI must be set properly the manufacturing: Toshiba, product name: for example by Satellite M115-S30

  Finally and most importantly, I found this thread useful forum on the Media Express recovery procedure:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=51801쩙

  Could be useful for you!

• Am having some problems with Outlook Express 6.0. When I send a message he doesn't leave my Outbox.

  When I send a message that it does not leave my Outbox, says there is an error, but there is no error code, but the message was sent. Checking virus, malware checked and still the same. Someone at - it ideas?

  You have apparent dbx file corruption.
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx