Lost my wireless with a lan cable connected

Similar Questions

• HP laptop: unable to identify the lan cable connection

  Microsoft Windows [Version 6.3.9600]
  (c) Microsoft Corporation, 2013. All rights reserved.

  Rodriguez C:\Users\anshu > ipconfig/all

  Windows IP configuration

  Name of the host...: fadiga
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Working Group

  Ethernet connection to the Bluetooth 2 network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  #2
  Physical address.... : B0-10-41-80-AF-1E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 5:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Hosted network virtual card
  Physical address.... : B0-10-41-80-AF-1E
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 2:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Wi - Fi Direct virtual card
  Physical address.... : B0-10-41-80-AF-1F
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. : Working Group
  ... Description: RT3290 Ralink 802.11bgn wireless adapter
  Physical address.... : B0-10-41-80-AF-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e809:c01a:618f:7b5a %4 (Preferred)
  IPv4 address...: 192.16.137.4 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Saturday, June 11, 2016 08:56:13
  End of the lease...: Wednesday, June 15, 2016 12:56:15
  ... Default gateway. : 192.16.137.1.
  DHCP server...: 192.16.137.1.
  DHCPv6 IOOKING...: 78647361
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers...: 10.10.2.2.
  192.16.137.1
  NetBIOS over TCP/IP...: enabled

  Ethernet Ethernet adapter:

  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : 14-58-D0-C5-74-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::3070:15bf:b1ee:daab %3 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.218.171 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 51665104
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : Working Group
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:c010:8904:c010:8904 (Preferred)
  ... Default gateway. :
  DHCPv6 IOOKING...: 704643072
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers...: 10.10.2.2.
  192.16.137.1
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter ISATAP.workgroup:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Working Group
  ... Description: Adapter Microsoft ISATAP #5
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {74914F29-E819-4DEB-8CC2-D37CBFD70F3B}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #6
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Rodriguez C:\Users\anshu >

  On the lan cable connection, it says as unidentified network.

  That's what I have to type the command ipconfig/all.  I tried to reinstall drivers recvoery as Manager, but no results. It worked without problem until now

  @anshu645

  Home networks typically use a form any of 192.168.x.x

  For example:

  192.168.1.14

  Found in your example:

  192.16. 137.1

  Also found:

  Autoconfiguration IPv4 address. . : 169.254.218.171

  +++++++++++++++++++++++++++++++++++++++++++++

  I suspect that the installer with your home network router is misconfigured and the network can't find a viable (useful) DNS address to use for the purpose of ISP Internet Service (ISP) connection.

  Please see the following:

  HP PC - troubleshooting wired home networks (Windows 8)

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• No 17R5720 Dell Wireless with an adapter N2230 connections available

  I have an Inspiron 17R5720 with a N2230 adapter using Windows 7 laptop. I bought this new 12/2013 and never had a problem with the wireless (of course just after the expiration of the warranty) so far. My problem is I can not connect to wireless internet, I get the message "no connection is available. My other PC connect wirelessly without problem and my 17R connects with the cable, no problem. I've updated all the software. When I ran check diagnostic Dell he only showed 'Test of 20 failed memory Module', when I checked the driver of N2230 card showed (code 52) and uses no resources because it has a problem. My test failure of memory could be causing my problem N2230. I did a lot of reading online and it seems that the N2230 adapter is not the most reliable equipment and nobody knows what is a code 52?

  OK, thanks for your help. I'm tired of piece information problem and gritted my teeth. I made a 'clean' of Windows installation and everything now works great, without errors or problems. Before biting the teeth, I did all the updates both Dell and Windows.

• Why don't I get sound with my HDMI cable connected to the TV?

  I have a specialist HDMI cable to connect my macbook to a monitor or a TV. I have the good picture but no sound. Which can be fixed?

  Which macbook you have and what port you connect the cable "specialised" HDMI to?

• PROTECTED M800 auto boot up after connected with lan cable

  Hi all

  I have a problem with my laptop Toshiba Portege M800. I decided to connect a lan cable directly on the cell phone instead of using the wireless feature. However, when I shut down the laptop, it will automatically start upward. But after I unplug the lan cable and stop working properly. Can I know the config to make the laptop does not auto boot up after I closed the laptop with the lan cable connected to it.

  Hello

  I think that the boots mobile upwards because the wake on LAN in the BIOS option is enabled
  Please disable this option (in BIOS), save the changes and restart the device

  Then test this new!

  Welcome them

• Pavilion dv7 Notebook - how will I know if I'm connected with the Ethernet cable or wireless?

  The notification area icon displays only a wireless connection, although the ethernet cable is connected to the laptop.  HP Connection Manager shows that both wired and wireless connections are active.  All of my previous laptop (not HP) had different icons for wireless to a wired connection in the notification area.  HP has a different icon for a wired connection?  If so, why it doesn't show in the notification area?

  obxperson99 wrote:

  Enrico, thank you.  I have installed Win7 Pro.

  The Network and Sharing Center says I'm connected wireless.

  Program of HP's "Connection Manager" shows that both the wired (ethernet) and wireless networks are connected.

  If I am always connected wirelessly with the ethernet cable plugged into my machine, how to move from the wired connection?

  Open the network and sharing Center. Look at the picture of what I have posted. Do you see where it says log in or out? Select it, and then disconnect from the wireless network. If you are also connected to the wired connecttion, then the connection should be almost transparent.

• Give a higher priority than the wireless LAN / off wireless if LAN is connected

  Hello.

  What I want to do is quite simple: Im my office there is a fast LAN connection and a pretty poor wireless connection. Therefore, I want to say my device: "If there is a network cable is connected, simply use LAN." In this case, do not use Wifi. If there is no LAN cable connected, try to connect to Wifi. »

  It's really annoying to change this manually each time.

  I have already changed the priority of network connection in Windows 7 as described here: http://support.microsoft.com/kb/2526067

  But in vain.

  My laptop is E531.

  WIFI device: Intel Centrino Wireless-N 2230
  Date of the driver 30.09.2012
  15.3.1.2 driver version

  Hi cis.

  did you by chance of access installed on your system?  It is possible that the wireless network adapter is set to a higher priority than LAN in your location profile which is the cause of the behavior.  If you have not installed AC it can be a possible solution, you can try.

  Link to another thread on this topic;

  http://forums.Lenovo.com/T5/ThinkVantage-Technologies/access-connections-disable-WiFi-on-wired-conne...

• N300 not see the Lan cables

  Hello world!

  After the oath to a customer support agent, I decided to turn to the community that might better support than support Netgears AWEFUL!

  I tried a modem LAN cable connected to my PC, but nothing lights up on the modem telling me its plugged in, and nothing on the PC tells me that the LAN cable is pluged. I tried 2 different PC with 2 different LAN cables, both having same issue.

  Help, please!

  Kevin

  ZS - KEV

  Sorry I worded wrong, but in Network Center and sharing, then click on change adapter settings here you will see your connections and you can right click and allow it.

  DarrenM

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Tecra A6 does not connect to internet with lan cable

  I got a new Tecra A6, (windows xp) which is barely a week. fine, except that when I connect my router to the laptop computer with lan cable broadband, I am not able to connect to the internet. When I connect the cable to the internet, I'm getting the lan icon works correctly, but when I open a browser page, it says no connection.

  considering that wireless works fine.

  help appreciated.

  Check the firewall settings.
  Maybe the firewall is on and does not allow you to open Web sites.
  Please also check the internet option-> connections in the

• Router not connecting wireless pc whenever I was connected before with Ethernet cable...

  I have a laptop with Win Vista (Hp Pavilion), and I always have to connect to my wireless router (Thomson). Until now, I had a problem, especially with the bad weather a few times and I thought is about the quality of line.

  In general it wasn't working properly, I mean the connection. A few weeks now that I have another Laptop (mac) connect to the network, but always with a ethernet cable, I realized, then when I tried to connect via WiFi HP laptop, once again, is it just doesnot work... I almost every time to reset the router, to establish the wireless connection. No matter if the computer mac laptop is connected or not if a cable, I have no connection to the network, and I have reset the router. Subsequently, all right. Someone knows a possible reason? Thnx in advance...

  Hello

  I suggest you try the steps from the following link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Post us the results once you try the steps above.

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• I wan to use connections cable and wireless with Windows 7.

  I use Windows 7. I have a wired ethernet connection, but also internal wireless.

  I want to be able to use both connections. I'm using VMware Workstation and it allows me to specify which adapter to use with the virtual machines. However, when Windows 7 detects there are two cables and wireless, it disables the wireless and automatically uses cable.

  How to use both?

  Hi Michael,

  Thanks for the reply. By the brand and model of the PC, I see that there is not a driver designed for Windows 7. Try installing the driver in compatibility mode. Is your problem with the virtual machines that you have running, the host computer, or both? If it's on the host computer and that you have installed the latest driver in compatibility mode for Windows 7, then it is probably a compatibility problem of driver/hardware that by default, this feature in Windows 7 works.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• can I use my wireless printer if it is connected to the main computer with the USB cable?

  My main computer runs XP Professional and is not wireless capable (that I know), my laptop running Windows 7 is wifi enabled, it can independently connect to the internet and printer (Photosmart 5510) is wifi capable but that is currently connected to the main computer with a USB cable.

  My question: can I use the printer to the host computer by USB and computer laptop through wireless?  If yes how to configure connections? Thank you.

  Hello

  A small wifi Wireless USB on the XP machine should work just fine. You can OpenOffice.org printer to two computers wireless. I don't think that a machine can access the printer if you plan to use the USB connection or wireless. I have not tried yet, maybe next weekend.

  Kind regards

• Toshiba NB550-111 - no connection if the LAN cable is more than 2 metres

  Hello

  My newly purchased Toshiba NB550-111(Windows 7 Starter Service Pack 1) has problems with the LAN card.
  If the LAN cable is more than 2 meters, no relation to Allied Telesyn switch (no indicator led on the switch, 2 other desktop computers already connected). I tried not to connect in a different port (one used previously by one of desktop computers), no connection. I tried with 3 cables, still no results.

  Cables (cat5E, so important) have been tested OK before with a cable Tester, and I use both of them without any problem with another 2 desktop computers at home. I set another cable (5 m long, newly purchased) and tested for connectivity. It works very well with the other two offices, no results with the netbook. I tried with adapter it works, I disabled ' energy efficient ethernet "NIC, still no connection properties page. It only connects if the cable is less than 2 meters. I tried to connect the netbook directly to the DSL router, still no connection with a longer cable.

  The device is reported by windows as work very well, and the test Toshiba utility ends there is no problem. Windows I configured in the Control Panel, the Plan balanced for maximum performance in the power options, still no results.
  Any ideas, please?

  Now maybe stupid question but what is with WLAN? You don t want to use WLAN?