Lane Express MRA DNS Cluster
Hello
I am the expressway MRA Cluster design and I'm a little confused on the Expressway to Natting private dashboard Public.
Veuileez it correct me if I'm wrong.
Publish Srv DNS to ISP records:
_collab - edge.example.com
to point to "A" records the two expressway Edge host
Question?
I don't have a single public IP address, it is fine if the two hosts expressway-edges ' A' records are pointing to the same public IP address.
Name of the Expressway-Edge Cluster must be the same in the same domain as the Expressway-Edge servers
Question?
Where do I create the Cluster FQDN internal or external, and that it should resolve to?
Hello
If you have a public IP, single and multiple inside hosts to reach outside, you can use static NAT differentiating ports of destination outside
for example.
IP nat inside source static tcp 10.10.10.1 80 80.123.54.1 80
IP nat inside source static tcp 10.10.10. 2 80 80.123.54.1 8080
Although you can form a cluster, each E highway has its own ip address
Unfortunately, because a MRA session involves different TCP and UDP ports, this can not be done.
In this case, the use of a specific load balancer might be a solution, but the Cisco could not support it.
So the way forward is to set up a public ip address for each node E
Here's a post with a similar request.
https://supportforums.Cisco.com/discussion/12070126/VCs-Expressway-clust...
Concerning
Carlo
Tags: Cisco Support
Similar Questions
-
Problem with LAN Express airport
Hello
I recently bought an Apple AirPort Express router and I have several problems using the Ethernet with the most active airport. The thing is with my old router, I could have been connected to the ethernet cable, while at the same time connected with a LAN cable to my Macbook (end of 2015). The old router would have generated a wifi connection, but at the same time, would have enabled internet connection by cable to my Macbook without the active WiFi. People could use WiFi at home, but the Macbook would be connected to the internet by cable (lan cable connected to the router)
My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active. Currently, I have the ethernet cable connected to the airport and cable Lan also connected to the airport and the Macbook, but the internet will not work unless the WiFi is active. I would like to turn off the WiFi on the Macbook and always have an internet connection through the LAN cable that is connected between the AirPort Express device and Macbook.
Thank you
My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active.
Is the Terminal AirPort Express the only router in the current configuration of your network? No matter, what is the brand and model of the modem Internet you have the Express directly connected by Ethernet? ... or is the Express connected by Wi - Fi to the modem?
-
Hello
What I want to do is add the ESX host for VC using IP addresses and then put up a cluster. Is this possible?
Simply, DNS resolution is essential for HA/DRS?
Martin
You can use the file/etc/hosts, but as soon as the update 2 HA will work with the IP adrdess and are more reliant on DNS resolution. Personally, I would use files hosts just because it is easier to identify a nameserver on IP, but either should work.
SID Smith-
VCP, CCA (Server Xen), Hyper-V & SCVMM08 MCTS, CCNA and VTSP
http://www.dailyhypervisor.com
Don't forget to assign points for correct and useful responses. ;-)
-
Multi-lane Express DAQ Assistant several sampling rate
Hello
I am trying to acquire multiple signals using different sampling frequencies.
I have 4 K type thermal couples I would record at a lower rate then a set of scales.
Currently, I have all these channels configured in the DAQ Express Wizard but I would like to acquire different sampling frequencies for each type of signal.
I use a chassis PXI-1052 and a Module of 1102 for thermal couples and a 1520 module for my scale.
Any help would be appreciated.
-
Hello
I have created a DNS SRV to configure in the FULL of the VCS Cluster domain name.
The problem is when devices try to enroll in the VCS Cluster; I put in the endpoints, in Gatekeeper registration DNS or IP address of the DNS SRV but the always end points will never reach the cluster of VCS.
I check the logs in DNS SRV and I don't see any request from devices.
I think I need to create a virtual IP address with DNS with load balancing, I mean: IP/DNS (FQDN) for the Cluster with load and balance when devices trying to connect to the cluster's IP/DNS it transmits the request to an IP or host name of a host in the cluster.
DNS cLuster
23.1.0.201 (vcs.xxx)
The peer of the cluster:
23.1.0.32 (vcscontroltc.xxx) Master
23.1.0.33 (vcscontrolvag.xxx) slave
XXX--> field
Is this right?
Thanks in advance.
Best regards.
Hello
then 23.1.0.201 is the IP address of your DNS server?
How you need to configure is:
FULL of the cluster domain name: vcscluster.domain.local
VCS counterpart A: vcscontroltc.domain.local
VCS counterpart B: vcscontrolvag.domain.local
With the above assumptions, that's what you create in DNS:
-For the FULL domain name cluster, create two A records for vcscluster.domain.local one pointing to 23.1.0.32 and the other pointing to 23.1.0.33. With that, I recommend that you enable alternate on your DNS server.
-For each peer, create a record, so vcscontroltc.domain.local points to the points 23.1.0.32 and vcscontrolvag.domain.local to 23.0.1.33.
-Create SRV H323 and SIP records for vcscluster.domain.local. With that, I recommend that you create two SRV records for each service, pointing A Exchange and showing a B counterpart, with a weight and priority. For example:
_sips._tcp.vcscluster.domain.local-> vcscontroltc.domain.local, priority 1, weight 50
_sips._tcp.vcscluster.domain.local-> vcscontrolvag.domain.local, priority 1, weight 50
If you follow the advice above, you should be able to configure all of your interior SIP and H323 endpoints with a h.323 gatekeeper address/SIP proxy address, of vcscluster.domain.local and endpoints must enroll in one of the peers, regardless of whether endpoints supports DNS SRV.
If the domain that you use is public, you also want to add the SRV records for that domain name. These SRV records must point to your VCS Expressway, to ensure that incoming calls from URI function as it should. For example:
_sips._tcp.domain.local-> vcse.domain.local, priority 1, weight 100
If you have several VCS-E you can adjust the SRV records accordingly.
Hope this helps,
Andreas
-
How to reset the password forgotten for the Airport express
I hid says on my airport express and I don't remember the password for it. How to reset the password
If you have the version 2 ports of the AirPort Express, connect your computer directly to the LAN <>- Express port to see if you can access this way AirPort Utility.
AirPort utility is as follows on your Mac: Finder > Applications > utilities > AirPort Utility.
If you can 'see' the AirPort Express in this way... click on the image of the AirPort Express
Click Edit in the window that appears
Click on the menu on the Basic Station ... to the top of the screen, where you see the icon Apple, file menu, edit the menu, Menu Help window menu, etc.
Click Show passwords and you will see your forgotten password
If you are unable to access the AirPort Express Terminal using wired Ethernet, you can reset the password using one of the methods described in this excellent forum Tesserax an expert user tip.
-
DNS virtual or physical: best practice on environmental HA/DRS
Hi all
Our current infrastructure consists of 19 ESX 1 vCenter, 2 Virtual DNS. All our aggregates are configured for HA/DRS.
Last week, our team changed network configurations and we had a storm to spread on the management network. Half of our virtual machine have been stop HA, including our 2 Virtual DNS configuration. We had a hard power on these servers, first recorded, then locked, etc...
I want to avoid this kind of problem in the future.
So, what I current DNS cluster DRS/HA Server? Do I need to have a physical?
Thank you
A couple of things here. You might want to "review" your design around the 'Isolation response' decision which could cause virtual machines to be powered off in scenarios like these where hosts are "flooded" with traffic. It is an attack of back on your own network that's happened. With or without a review medical Server DNS scenario more that would be the same.
Duncan (VCDX)
Available now on Amazon: vSphere 4.1 HA and DRS technical deepdive
-
The most convenient airport and T-Mobile ZTE Falcon Z - 917 hotspot
Hello
Have my Time Capsule airport set up for my home network and connects to the Internet via WiFi (WiFi Mojave) antenna Service.
I would like to connect my network to a T-Mobile Hotspot for a faster speed.
Anyone know how I can do this via the AirPort Utility please?
A time Capsule WiFi AirPort can connect to a WiFi Hotspot?
Thanks much for any help you can give.
David
A time Capsule WiFi AirPort can connect to a WiFi Hotspot?
Yes, if the hotspot provides an Ethernet port for a wired connection... Since the Capsule must be connected to another router or a modem with a connection permanent Ethernet cable, fixed.
If the hotspot does not offer an Ethernet cable... it would be awkward, but it would probably work. Add an AirPort Express to 'join' the wireless hotspot, then connect an Ethernet cable to the Ethernet port LAN Express on the WAN on the Time Capsule port and set up time Capsule to create a wireless network.
If you decide to try this, make sure that you understand the political s store back before buying the AirPort Express... in case things do not work.
-
I downloaded a program called Driver Checker - then updated all my drivers. Now, I can't use my wireless connection! I restarted. I've probably got the wrong driver? How can I get the right one back please? Steve ps I also got:
Network connection: name = connection to the perimeter network Wireless 3 = LAN - Express AS IEEE 802.11 g miniPCI adapt #2, MediaType = LAN, type = Wireless Info Network connection: name = Local Area Connection 3, Device = Intel(r) PRO/100 VE Network Connection, MediaType = LAN, type = LAN Info Network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394 Info Network connection: name = 3 Modem USB, device = HDAUDIO SoftV92 Data Fax Modem with SmartCP, MediaType = PHONE, type = NONE Info Connections Ethernet and wireless available, ask the user for selection action User input required: select network connection Info WiFi selected and
FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established And now you know why these programs "driver checker" are useless. I hope that you do not have anything for her. Yes, you must install the correct drivers for your wireless network card. General information of pilots:
The first law of Driver Updates is "if it's not broken, don't fix it". Normally if everything works, you want to leave things as they are. The exception is that heavy players usually want to update their video and sound drivers for every last bit of absolute performance of the equipment to get the best frame rate. If you are not one of these people, you need not update your drivers, if there is no problem you're trying to solve.
Never get the drivers from Windows Update. Bring:
1. site of the device mftr. ; OR
2. site of the card mother mftr. If the material is on board; OR
3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).Read the installation instructions on the Web site where you get the drivers.
To find out what hardware is in your computer:
1. read all documentation that you got when you purchased the computer.
2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.http://www.belarc.com/free_download.html - Belarc Advisor
http://www.gtopala.com/ - System Information for WindowsIf you have installed the drivers from Windows Update, you can roll them back:
How to roll back a device driver in Windows XP - http://tinyurl.com/86yb6 MS - MVP - Elephant Boy computers - Don ' t Panic!
-
wrt1900ac connected to linksys4200
I have wired wrt1900ac connected to the router linksys4200. WRT1900 is configured as a main router (first). Please note 2nd router is connected to the first. And I can easily connect to the internet using wired linksys4200 to access wifi.
Everything works fine except 2 things.
1. on the network WRT1900ac linksys4200 map is shaded (without an assigned IP address).
See the photo below.
2 hour on Router 2 linsksys 4200 is unavailable.
See the photo below.
Is that should inspire or that something isn't set up correctly?
DHCP on linksys4200 is disabled.
Thank you in advance,
Koze
Basic-online network => LAN-online static DNS
-
device disappeared from the system without first be prepared for removal. __
The following error message has appeard in the event where the journal and I can't find my wireless network device. Driver has been reinstalled with no success. This means that the material is not? Error message is:
The device "LAN-Express AS IEEE 802.11 g PCI-E adapt ' (PCI\VEN_168C & DEV_001C & SUBSYS_E000105B & REV_01\4 & d69bda5 & 0 & 00E2) disappeared from the system without first be prepared for removal."
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
Troubleshoot network adapter problems to Microsoft link above.
See you soon.
Mick Murphy - Microsoft partner
-
L2l Tunnel upward, without traffic transits
Two 5505 ASA s for the main site of a customer and a local office. I have the tunnel upward. But I am unable to pass traffic through it. I thought I got it, but it turns out I was wrong so I'll let the pros have to him. Thank you!
Main site:
ASA Version 7.2 (4)
!
City of hostname
activate iNbSyJZ1ffmb9kn1 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.100.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address 24.x.x.97 255.255.255.248
!
interface Vlan3
prior to interface Vlan1
nameif dmz
security-level 50
no ip address
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS server-group DefaultDNS
outside_in list extended access permit tcp any host 24.x.x.98 eq 3389
outside_in list extended access permit udp any host 24.x.x.98 eq 1194
outside_in list extended access permit tcp any host 24.x.x.98 eq www
extended vpn 192.168.100.0 ip access list allow 255.255.255.0 192.168.199.0 255.255.255.0
extended vpn 192.168.100.0 ip access list allow 255.255.255.0 192.168.1.0 255.255.255.0
outside_1_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 100000
recording of debug console
debug logging in buffered memory
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
IP local pool vpnpool 192.168.199.10 - 192.168.199.20
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 524.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access vpn
NAT (inside) 1 192.168.100.0 255.255.255.0
public static 24.x.x.98 (Interior, exterior) 192.168.100.3 netmask 255.255.255.255
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 24.x.x.102 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.100.0 255.255.255.0 inside
http 192.168.100.50 255.255.255.255 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs
card crypto outside_map 1 set 24.x.x.54 counterpart
map outside_map 1 set of transformation-ESP-3DES-MD5 crypto
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
md5 hash
Group 1
life 86400
Telnet 0.0.0.0 0.0.0.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 60
Console timeout 0
attributes of Group Policy DfltGrpPolicy
No banner
WINS server no
DNS server no
DHCP-network-scope no
VPN-access-hour no
VPN - connections 3
VPN-idle-timeout 30
VPN-session-timeout no
VPN-filter no
Protocol-tunnel-VPN IPSec l2tp ipsec webvpn
disable the password-storage
disable the IP-comp
Re-xauth disable
Group-lock no
enable PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelall
Split-tunnel-network-list no
by default no
Split-dns no
Disable dhcp Intercept 255.255.255.255
disable secure authentication unit
disable authentication of the user
user-authentication-idle-timeout 30
disable the IP-phone-bypass
disable the leap-bypass
disable the NEM
Dungeon-client-config backup servers
MSIE proxy server no
MSIE-proxy method non - change
Internet Explorer proxy except list - no
Disable Internet Explorer-proxy local-bypass
disable the NAC
NAC-sq-period 300
NAC-reval-period 36000
NAC-by default-acl no
address pools no
enable Smartcard-Removal-disconnect
the firewall client no
rule of access-client-none
WebVPN
url-entry functions
HTML-content-filter none
Home page no
4 Keep-alive-ignore
gzip http-comp
no filter
list of URLS no
value of customization DfltCustomization
port - forward, no
port-forward-name value access to applications
SSO-Server no
value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information
SVC no
SVC Dungeon-Installer installed
SVC keepalive no
generate a new key SVC time no
method to generate a new key of SVC no
client of dpd-interval SVC no
dpd-interval SVC bridge no
deflate compression of SVC
tunnel-group 24.x.x.54 type ipsec-l2l
24.x.x.54 group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:5180fc35fcb77dbf007b34bc2159c21b
: end
# Sh crypto isa city its
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 1
1 peer IKE: 24.x.x.54
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE
# Sh crypto ipsec city its
Interface: outside
Tag crypto map: outside_map, seq num: 1, local addr: 24.x.x.97
outside_1_cryptomap 192.168.100.0 ip access list allow 255.255.255.0 192.168.1.0 255.255.255.0
local ident (addr, mask, prot, port): (192.168.100.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.1.0/255.255.255.0/0/0)
current_peer: 24.x.x.54
#pkts program: 56, #pkts encrypt: 56, #pkts digest: 56
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 56, #pkts comp failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0
local crypto endpt. : 24.x.x.97, remote Start crypto. : 24.x.x.54
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: 16409623
SAS of the esp on arrival:
SPI: 0xFC3F0652 (4231988818)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 21, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (4275000/28514)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0 x 16409623 (373331491)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 21, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (4274996/28514)
Size IV: 8 bytes
support for replay detection: Y
Remote Desktop:
ASA Version 8.2 (5)
!
water host name
activate rAAeK7vz0gtMeIgU encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
name 192.168.100.0 City City LAN description
DNS-guard
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.2 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address 24.x.x.54 255.255.255.248
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS server-group DefaultDNS
outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 255.255.255.0 city
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 255.255.255.0 city
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 32768
logging asdm-buffer-size 512
Monitor logging notifications
debug logging in buffered memory
logging trap notifications
notifications of logging asdm
Within 1500 MTU
Outside 1500 MTU
IP local pool water 192.168.1.15 - 192.168.1.20 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (inside) 0-list of access inside_nat0_outbound
Route outside 0.0.0.0 0.0.0.0 24.x.x.49 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs
card crypto outside_map 1 set 24.x.x.97 counterpart
map outside_map 1 set of transformation-ESP-3DES-MD5 crypto
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
md5 hash
Group 1
life 86400
No encryption isakmp nat-traversal
Telnet 192.168.1.0 255.255.255.0 inside
Telnet timeout 60
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
attributes of Group Policy DfltGrpPolicy
Group internal water policy
attributes of group water policy
value of 192.168.1.1 DNS server
VPN-idle-timeout no
VPN-session-timeout no
Protocol-tunnel-VPN IPSec
attributes of Registrar username
VPN-group-policy DfltGrpPolicy
type water tunnel-group remote access
water General attributes tunnel-group
water of the pool address
Group Policy - by default-water
DHCP server 192.168.1.1
water ipsec-attributes tunnel-group
pre-shared key *.
tunnel-group 24.x.x.97 type ipsec-l2l
24.x.x.97 group of tunnel ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
Cryptochecksum:06bda38461d2419b3e5c4904333b62e7
: end
# sh crypto isa water his
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 1
1 peer IKE: 24.x.x.97
Type: L2L role: answering machine
Generate a new key: no State: MM_ACTIVE
water # sh crypto ipsec his
Interface: outside
Tag crypto map: outside_map, seq num: 1, local addr: 24.x.x.54
outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.100.0 255.255.255.0
local ident (addr, mask, prot, port): (192.168.1.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (Town/255.255.255.0/0/0)
current_peer: 24.x.x.97
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 78, #pkts decrypt: 78, #pkts check: 78
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0
local crypto endpt. : 24.x.x.54, remote Start crypto. : 24.x.x.97
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: FC3F0652
current inbound SPI: 16409623
SAS of the esp on arrival:
SPI: 0 x 16409623 (373331491)
transform: esp-3des esp-md5-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 126976, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (3914995/28408)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0xFFFFFFFF to 0xFFFFFFFF
outgoing esp sas:
SPI: 0xFC3F0652 (4231988818)
transform: esp-3des esp-md5-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 126976, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (3915000/28408)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
Thanks again!
In addition,
Now that I actually think...
The original ICMP you did would go as follows
- 192.168.100.x send ICMP messages to echo
- Happens on ASA local
- Gets sent through the VPN L2L connection
- Arrives on the ASA remote
- ASA forwards traffic on the LAN Host 192.168.1.x
- LAN forward host to respond to its default gateway 192.168.1.1 (NOT ASA)
- ICMP Echo traffic gets lost because of no real route for the return traffic
- Therefore, you see no encapsulated traffic to destination, ASA, decapsules only traffic that origin of the host that sends the ICMP messages to echo through the VPN L2L
-Jouni
-
Cannot open the expressway-Edge page
Hi people,
I want to know everything by deploying cisco expressway it is essential to have the lane Express-C and highway-E must be on the same version.
I have expressway-C on x8.2.1 so that the motorway-E on x8.1.1. It would work, or it must be on the same version.
It is recommended to be run on the same version and only to run different versions for short periods of time, like during upgrades. If for any reason any you run different versions, just be sure to check the release notes to ensure there is no change in the software features or conflicts that could prevent something operating, but as I said, they should be on the same version.
FYI, the title of your discussion and what you asked, it's different, suggest you to change your message and change the title to be match your question.
-
Traversal Highway-C non-active area with Expressway-E
Hello
I got under log on Highway-C. Non-active area crossing is not Expressway-E-contact. But the two server are able to ping.
Highway-C - 10.87.16.14
Lane express-E - 10.87.33.13
2015-04 - 02T 16: 42:02 + 03:00 "" "" TVCS: event = "Failure of Communications external server" reason ="TLS negotiation has not" Service = "NeighbourGatekeeper" Dst - ip ="10.87.33.13" Dst-port = "7001" detail ="name: 10.87.33.13" Protocol = "TCP" Level = "1" elements UTCTime ='2015-04-02 13:42:02, 351" 2015-04 - 02T 16: 42:02 + 03:00 "" "" "TVCS: event ="outbound TLS negotiation error"Service ="SIP"Src - ip ="10.87.16.14"Src-port ="25902"Dst - ip ="10.87.33.13"Dst-port ="7001"detail ="unable to get local issuer certificate"Protocol ="TLS"name common ="10.87.33.13"Level ="1"elements UTCTime ='2015-04-02 13:42:02, 351" Please help solve the problem.
Thank you
Afzal
Never solved this?
-
TMS with CUCM registered devices
I'm reviewing a BOM for a customer, and the current proposal has:
CUCM 9
Lane Express Core
Side of the highway
TMS
vTelepresence ServerFinally, I have checked, we needed VCS control to allow some TMS plan the server TP. With the current software (CUCM 9.x, TMS 14.4, etc.) can I use TMS to annex CUCM registered endpoints and TP Server, if the server TP is to shared resources directly to CUCM? There is no conductor in this deployment. Looking for a validation test.
THX,
Rob
Hi Rob,
Since version 14.4, TMS supports the planning of bridges that are shared resources to the CUCM, so limiting earlier 'all bridges must be deployed on the side of VCS' is no longer valid.
However: TMS can plan only telepresence servers who are in managed mode locally. Telepresence virtual servers don't support not mode managed locally, so if you want distributes them TMS, you will need to put a conductor in the mixture.
Kind regards
Kjetil
Maybe you are looking for
-
L870 and Win8 - satellite laptop is very noisy
Satelitte L870 windows 8... noisy inside my laptop... need help to solve this problem...
-
Home Edition Windows 7 x 64 with the update problem
Hi M.T. I have a problem with Windows Update on my W7 home edition of x 64. In the last 3 days, the update of trys to reinstall the same updates, because it shows failiors update. There are not exactly errors messages, but once again necessary to ins
-
After the installation of MS Office 2003, and then upgrade to office SP3 why than l ' the updater of Win 7?, error "WindowsUpdate_80072EFE."I had to fix it on charge 2 after receiving updates for MS Office, maybe a bug in Win 7? any help please
-
Try to install Windows Easy Transfer to migrate files from Windows XP to Windows 7 Professional. Problem is that Microsoft has established transfer only from Windows XP to Windows Vista?
-
BlackBerry Smartphones play youtube
did anyone here know wer can I or how to download or play youtube on my blackberry 9500, because I have already download youtube app, but it does not play...