Laptop computer Ram input voltage

Hey HP community.

Since I am in need to buy aditional RAM for my laptop, I need to make sure that the values of the new RAM I buy are compatible with the remaining material. So, I have a HP Pavillion DV6 model: 6180sp and RAM in it is 2R-8 PC3 - 10600 s-09-10-f2, across spare part 1160 HP CX 621569-001 and also M471B5273CH0-CH9. So far, I found the pdf of some Samsung is 1.5V, but I really really need the input of an expert on this subject, as I do not wish to go spend €40 more for something at this time does not in my machine. I ask this because the two PDFs for RAM 1.35 models and 1.5V are rather confusing, that's why I need input from an expert.

Thank you for your time.

John

Hi @Guake

Welcome to the community of HP. I see that you are looking to add a little extra RAM to your laptop. Here is Service and Maintenance Guide for your model and on page 66 you can find the part numbers for the compatible memory. You can find those on Ebay/Amazon or ordered through HP Partsurfer.

Tags: Notebooks

Similar Questions

  • HP laptop, 2000: 2000 HP laptop computer ram Upgrade

    Hello

    I currently plan to upgrade my laptop HP 2000 4 GB ram 8 GB, I have a few questions that I need help.

    1. as my computer already has 4 GB ram ADI need to replace 4 GB of ram with a stick of ram 8 GB or can I buy another stick of 4 GB of ram and use it in the other location?

    2. for a few hours now, I searched for the right stick of ram for my model. This model is 2000-2d63TU.

    However, it turned out to be unsuccessful.  Is there anywhere I can look for the ram for my PC and if so I would like a link.

    3. my computer is an older model HP notebook I bought it 2 years ago now, I'm still able to upgrade or not?

    Thanks a lot for your help!

    Proudy

    Hello, 1) you can add another 4 GB stick in the slot available without problem. (2) can you tell me the model number of your RAM? I will gladly send a link when I find a product. (3) to answer this one, I have recently updated since 2005 xp machine and my hdx16 hp 2008 with more RAM and they both went well. I hope this helps

  • HP2000 2b10CA: laptop computer ram upgrade

    bought an old, as the new laptop, factory reset, reinstalled Win 8, updated to Win 8.1, and then win 10.  Original specifications say max 8 GB DDR3 1333 mhz SODIMM.

    2 related issues

    Firstly for the locations of 2 ram card do I have to use 2 x 4 GB, or can I use a 8 GB card in the slot low?

    second... 8 GB is really the max or was - the max just because 4 GB cards were bigger back then?  If she can endure more than how much more?

    Pretty much know my way around computers or the internet to find that the info on my own so any help is very appreceated.

    Thank you

    Oh yeh... laptop is HP 2000-model 2b10CA

    Hello

    http://support.HP.com/us-en/document/c03596925

    Page 2, 3, 45 46 in this manual: http://h10032.www1.hp.com/ctg/Manual/c03575298

    2 slots, taken max supported up to 8 GB with two sticks of 4 GB to the highest possible in each of the limits of motherboard provided 64-bit operating system is installed. Configuration of the RAM, speed, possible brand should be exactly the same to get guaranteed compatibility.

    Concerning

    Visruth

  • HP ENVY 15-ae109na: upgrade for HP ENVY 15-ae109na laptop computer Ram

    Please help I can upgrade the RAM memory to this laptop with this module of memory http://www.amazon.co.uk/gp/product/B00CQ35HBQ?psc=1&redirect=true&ref_=ox_sc_act_title_1&smid=A3P5RO...

    And how how it would be easy to do for this particular model? Thank you very much!!!

    Computernubie wrote:

    Please help I can upgrade this laptop with this jumper memory RAM http://www.amazon.co.uk/gp/product/B00CQ35HBQ?psc=1&redirect=true&ref_=ox_sc_act_title_1&smid=A3P5ROKL5A1OLE.

    And how how it would be easy to do for this particular model? Thank you very much!!!

    Hello

    This laptop is sold already with 12 GB of RAM. An upgrade to 16 GB is useless and that there should be a 128 SSD GB probably for the operating system. I don't think he needs any upgrade. However, memory module is compatible with your laptop.

    Page 43 of this manual shows how to replace the module / remove the bottom cover.

    http://h10032.www1.HP.com/CTG/manual/c04691689

  • Upgrade laptop computer Ram

    I have a hp laptop 1301 tx and I want to know my upgradation ram on the properties I have seen my type of ram is D 1333 ram and I ordered for kingston 2 GB ram which has

    Type of memory: 2 GB (64 x 256 MB) 1333 MHz DDR3 SO-DIMM

    Memory StandardDR3-1333/PC3-10600

    It will work with my laptop?

    Yes, it works perfectly.

    Since you have a 64-bit operating system, you might have installed a 4 GB chip and had 6 GB.

    One day you can install 2 x 4 GB and 8 GB if you want.

    Here is the link to the service manual. Procedures for removal and replacement of memory are in Chapter 4.

    http://h10032.www1.HP.com/CTG/manual/c03094322.PDF

    One thing to note... I have read it is VERY difficult to come down the lower lid, so don't be discouraged.  Read this thread below and click on the related links.

    http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-Pavillion-G6-memory-upgrade-problems/m-p/1374715#M6863

    Good luck and let us know how your upgrade was memory.

    Paul

  • Portable spectrum: will be my new laptop computer spectrum bought the work we camera in Australia

    Hello.

    I just bought a new laptop of spectrum in the United States.

    I need travel in Australia for work. This portable US will be OK when plugged into power in Australia which has a different voltage (assuming I use a plug converter suitable).

    Also, do you know if it is possible to use a HP spectrum Australian power adapter so that I don't have to carry around one of these power converters ugly on the end of the plug US?

    Thanks in advance.

    Hello

    First of all I live in a city called Melbourne (Aystralia) right now and my laptop computer loan spectrum is the United States (office of HP in Utah) and Yes, all I need is a tourist adapter as shown above.

    Second performance I see no difference, please note: we use 240V in Australia and the charger will be doing the work to convert AC current DC to run the laptop.

    I would like to mention here: I've traveled around not less than 20 countries with some laptops (from time to time, not at once) and once again all I need is a universal travel adapter.

    Kind regards.

  • Use of AL1511b laptop computer screen 5820 T-6401 in Italy. Simple adapter or converter needed?

    Use of AL1511b laptop computer screen 5820 T-6401 in Italy. Simple adapter or converter needed? AC adapter / CC seems to be internal. Can I just attach an adapter at the end of the wall to the monitor cord to fit Italian DC connector configuration or do I need a converter between the end of the US AC 3 earth-pin male connector and the Italian DC Jack? Some external adapters have a switch to change from AC to DC and some are just automatic. What is the story here? Any help would be appreciated.

    The power adapter in your laptop will automatically convert between 110 V to 240 V automatically. You must just the adapter to connect it to the outlet in Italy. Your monitor should also automatically convert the voltage as well, you need just the adapter to connect it to a power outlet Italian.

  • Cannot import .mxf in PPCC2014, but can in CS6 on the same laptop computer... huh?

    Just bought a new Asus laptop.

    4710HQ-i7 CPU @ 2.50 GHz

    16 GB of ram

    64-bit Operation

    NVIDIA Geforce GTX860m

    I installed PPCC2014. I can't import files from a Canon XF300 .mxf. I CAN import them into CS6 on the same laptop computer.

    I've been editing, .mxf files on my desktop to the PP years and for the last year on CC2014

    I tried to take the files, .mxf on the folder (which contains the .cif, .xml and .sif file) and import only and it does not work.

    The message I get is "not supported or damaged file."

    I tried to import by dragging and using import in the first.

    Someone knows what could happen?

    Thanks for your help.

    Jessic

    Hello

    I came across this before. Seems that Premiere Pro is not properly enabled. I suggest the following:

    Sign out of the creative cloud app and exit (Quit option will be available after a few seconds).

    Now move the following folders on the desktop:

    (1) SLCache

    Windows: OS Lecteur\Program Files (x 86) \Common Files\Adobe

    Mac: Adobe/Library/Application Support/Adobe


    (2) SLStore

    Windows: OS drive\ProgramData\Adobe

    Mac: Adobe/Library/Application Support/Adobe


    (3) OOBE

    Windows: OS Drive\\AppData\Local\Adobe Users\ directory

    Mac: /users / / Library/Application Support/Adobe


    Launch of Premiere Pro and sign in with your Adobe ID

    NOTE: Make sure that your Anti Virus/Firewall is blocking all the Adobe activation servers. Alternatively, you can also check your file "hosts" for any changes.

    If it does not help, I suggest you to runs the CC for Adobe apps cleaning tool to uninstall and reinstall: use of the cleaning tool CC to resolve installation problems. CC, CS3 - CS6

    Thank you

    Regalo

  • After syncing firefox from one laptop computer to the other, I repeatedly get syncted phone has the same IP address as the original. Reverse?

    One of the results of these two laptops with the same IP address was that the original laptop computer proxy settings have been changed and I could not get into the internet. After you restore the default proxy settings, I again had access to the internet, but two laptops always have the same IP address.

    You do not use DHCP to automatically assign different IP addresses?

  • I downloaded iTunes on a new laptop computer and he allowed. First of a süden, I can't sync my iPhone 6. What can I do?

    I downloaded iTunes on a new laptop computer and he allowed. All of a sudden, I can't sync my iPhone 6. What can I do?

    If your iOS device does not appear in iTunes, try the following:

    1. Open Control Panel > Device Manager
    2. Plug in your device
    3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
      It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
    4. Right-click and select software update of the driver...
    5. Click Browse my computer for driver software
    6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
      C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
    7. Click on let me pick from a list of drivers for devices on my computer
    8. Click on Apple Mobile Device USB Driver
    9. Click Next, then close and exit the Device Manager

    To step 3 above, open the Device Manager. Expand one of the articles that are listed.

    • USB Bus controllers
    • Imaging devices
    • Portable devices
    • Other devices

    Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

    Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

    If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

    Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

    TT2

  • I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

    I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

    If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

    As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

    At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

  • My laptop Toshiba there input HDMI?

    My laptop Toshiba there input HDMI?
    I was wondering because I want to play my xbox one on it.

    If your laptop has only one HDMI port, then this is an HDMI output port.
    Only certain models Toshiba Qosmio bit supported two ports (IN/OUT) HDMI in the past

  • Laptop computer charger plugged in but not charging

    Hello

    I bought a computer laptop hp pavilion dv6-6154tx laptop computer last month.my, developed a particular problem. When I connect my charger to it, it starts to load, but after a while it stops and the battery icon shows "plugged in, not charging". Then after awhile it again starts.

    Sudroid.co.cc

    There is a BIOS update available that is specifically for the intermittent support question. I recommend you to install.

  • Direct print from laptop computer connection

    I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

    You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

    If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

    That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

    On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

    If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.

  • HP15-g088ca: HP 15 laptop computer purchased less than 2 years ago. Broken hinge, display cases of separation. HP, please help.

    My son uses his laptop computer HP15 home to his office, rarely transporting.  He never gave it and a sweet user.

    The left hinge seems to be broken / defective, and separates the window.  For now, we are all leaving the screen open all the time, but it's a little awkward and the problem is certainly on a laptop less than 2 years old.

    Looking at the forum, it looks like a common problem.

    We are fans of HP in general, so I hope that this problem can be solved.

    Help, please.

    -Steve

    Hooray!

    HP solved the problem free of charge, including shipping in both directions and repair.

    It took ten days in total, and we used the laptop without a problem for about 10 days more.

    It seems that the hinges for laptop and the display case were entirely replaced, and no data has been lost.

    My son is thrilled to have his laptop in return, and to my eyes, HP just went through.

    I wouldn't hesitate to buy another HP product, although I confess in the hope that:

    (1) HP manufacuring no longer uses defective parts

    (2) HP treats everyone with this problem of hinge with the same care

    Thank you and HP support HP!

    -Steve

Maybe you are looking for

  • Possible to Insert Shapes' don't those in the cells of a table?

    the use of Pages 5.6.1 on Mac OS 10.11.3 (El Capitan). I made a table and can not find a way to put something other than the text in a table cell. so not shapes, text boxes, etc., of this kind. is this possible? If so, how? Thank you.

  • Will be a disk external DRIVE for the 360 Slim to work on the new 360 E?

    I am interested in getting the new Xbox 360 E model to replace my Slim 1 1/2 year, but I want to keep my external hard drive of 250 GB. Is it possible to buy an E 360 4 GB console and then use my hard drive on it? Or the E-360 is compatible with its

  • T5i firmware question

    Hi all My 700 d (T5i) still has the original firmware 1.1.1. I see that the most recent version is 1.1.4. I also found a 1.1.3 version, but not a version 1.1.2. Am I right assuming that I shouldn't update 1.1.1 directly to 1.1.4 but it needs to be up

  • My Windows XP installation disc is damaged and I need a replacement

    I just need a new disk or files so that I can create a new one, I DO NOT have a floppy drive so don't bother suggesting.

  • USB ports do not recognize devices

    Vista 32 bit OS was installed yesterday on a Toshiba laptop, Mdl: Satellite A135-S2246.  However, apparently, the drivers are no longer works as USB ports to recognize all of the devices that I plug into them. I get a message on the screen indicating