Laptop crashes after loading SP2 for Vista - stuck at 0%

Similar Questions

• After installing SP2 for Vista, everything that I try to print from this computer prints in poster format.

  After installing SP2 for Vista, everything that I try to print from this computer prints in format post little matter what I tell the printer to do.  I use a laptop Acer Aspire 9410, 32-bit, Windows Vista, IE 8.  Commands from another computer on the printer work properly.  Should I uninstall SP 2 & reinstall?  Or what is the best fix for the problem?  Thank you.

  shagen18,
  You need to uninstall the printer and make sure you have the latest drivers from the manufacturer of the printer and then reinstall the pritner.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't windows after installing SP2 for Vista

  I reinstalled my 32 bit Vista OS and all updates this weekend and it worked fine.  Tonight there was an available SP2 and I downloaded and installed.  The computer has been rebooted and never started.  At one point he showed a line of registry and was hanging there with him showing.  I do not write it down, but shut down the computer.  I tried a recovery disc that I had done, but it does not work.  How can I go back to windows.  I even tried to go into safe mode but who do not have me to Windows.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error code 0xc0000034 after update SP2 for Vista

  Hello

  Yesterday I ran my windowsupdates, one of them was SP2. When I rebooted the computer, a black screen appears with the error code ! 0xc0000034! 142/46596 (_000000000000000.cdf_ms)
  I turned off the computer and restarted again. I chose the recovery mode, but no results, the recovery was loop.

  What should I try next?

  Thanx

  Try to do this first, and then restart.
  Then try again.
  You have the disc from your computer's system?
  You may need to reformat.
  I hope you have backup.
  Good luck.

• Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

  Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

  Follow the info below to try a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• my computer won't let me download the sp2 for vista

  every time that I try in low load pack sp2 for vista it will for a while then says some of the components may not download and it is up to the sp1

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

• Can I upgrade vista ultimate 32 bit sp2 for vista 64-bit?

  Can I upgrade vista ultimate 32 bit sp2 for vista 64-bit?

  Ranging from a 32-bit operating system 64-bit operating system is NOT a upgrade path.

  It must do a clean install with a full version of a Vista 64 bit operating system.

  How to do a clean install:

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean installation.

  And save all data because the hard disk will be wiped.

  See you soon.

  Mick Murphy - Microsoft partner

• SP2 for vista

  When sp2 for vista will be available?

  Hello

  "We intend to release the SP2 for Windows Vista and Windows Server 2008 to the second quarter of 2009."
  The 'Windows Vista Team Blog':
  http://windowsteamblog.com/blogs/windowsvista/archive/2009/02/25/announcing-the-Service-Pack-2-for-Windows-Vista-and-Windows-Server-2008-RC.aspx

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

• SP2 for vista asks you a username and password and the ease of accsess does not work?

  While the installation of sp2 it says windows will perform a clean update I read what was going to happen and gave go ahead and his now ask me a username and password, but I don't have vista sp1 version. I belive microsoft 1) I forgot to add a NAME AND PASSWORD of the user default or 2) messed with sp2 for vista completely...

  Hello

  The problem is solved?

  Reference:

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

• PC crashes after loading the service pack 1 for my Vista Home premium PC.

  My system crashed after I loaded service pak 1. It damaged my recovery partion and I can't boot into Vista Home Premium operatining system. I have a Compaq Presario F572US

  Hi JimmyZ1,

  · You receive an error message or error code when you try to start the computer?

  1. try to start the windows recovery mode repair.

  a. put the Windows installation disc in the disc drive, and then start the computer.

  b. press a key when you are prompted.

  c. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  d. click on repair your computer.

  e. click the operating system you want to repair, and then click Next.

  f. in the System Recovery Options dialog box, click Startup Repair.

  Startup Repair: frequently asked questions:http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  2. If startup repair does not restore the system to the date, it worked great for Windows recovery environment.

  Link: System Restore: frequently asked questions:http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  Link, please refer to: what are the system recovery options in Windows Vista? :http://windows.microsoft.com/en-US/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L350-24U: Windows Vista crashes after installing SP2

  Hello

  I own a Satellite L350-24U laptop with Windows Vista 32. I bought in October and had to reinstal the OS twice now. Still, it crashes after installation of Service Pack 2. After you restart the system, a blue screen appears, giving the following information

  STOP: 0 X 00000024 (0 X 00190444, 0X86B9BAD0, 0XC0000102, 0X00000000)

  I had to reinstall Win Vista with HDD Recovery from Toshiba (press F8, then repair etc.) and everything worked properly again.
  THS time, it's more serious. Last night the system shut down whenever you use internet explore (after about 30 seconds). SP2 has not been installed, but there are so many problems, I decided to install SP2, because I hoped that the bugs I had with SP2 would be eliminated. When installing SP2, the system crashed again, and now I got the same bluescreenmessage new.

  I tried to reinstall Vista, but the Toshiba HDD program starts no more: it is said: the installed program is not working (or something similar) - please click on ok to close.

  I did not burn the cd of recovery yet, so I don't know what more can be done and online support is closed today.
  I'd really be very happy for any help
  Thank you

  Hello

  I searched a bit on the Microsoft Web site and on the blue screen, I created this article:
  http://msdn.Microsoft.com/en-GB/library/ms793935.aspx

  So I think that the reason for the BSOD is a corrupted file system or a defective HARD drive. You should check the drive using the Drive Fitness Test for example.

  I put t understand why you didn't burn the disc of recovery yet. Why you didn t read the manual at first?
  Now, you have only one option to get a new recovery disk: Please order a new Toshiba directly: https://backupmedia.toshiba.eu/landing.aspx

• Computer HP crashes after loading of the Kodak camera in Vista

  Can you tell me if I need to load the upgrade of Windows 7 or Windows 7 program?

  I have a HP computer I bought a year and a half.  It came with Windows Vista.  Yesterday, while trying to load my Kodak camera on the computer, the computer kept freezing.  After trying all day getting something to work, I decided to get out the manual because I am almost computer illiterate.  He had instructions on restoring my computer, but I didn't completely read the instructions because I had spent so much time trying to make it work.  It was not good.  Everything I've done seems to have deleted Windows Vista... I get a screen that reads like this:

  Cannot start Windows Windows Boot Manager.  A recent hardware or software change might be the cause.  To solve this problem: 1. Insert your windows installation disc, and then restart your computer.  2. choose your language settings, and then click Next.  3. click on repair your computer.  If you do not have this disc contact your system administrator or the manufacturer to rely for assistance.  File: \windows\system32\winload.exe status: oxcooooooF Info: the selected entry could not be loaded because the application is missing or damaged.         My question is this: Windows Vista is still on my computer?  The man I spoke with the geek squad at best buy told me I just need to buy Windows 7 and download it and my computer wouldn't be good as new.  I went to Wal-Mart because Best Buy has been closed at the time wherever I have to go, and the only Windows 7 they have is an upgrade of Windows Vista. The Windows 7 upgrade will work?  The man at WalMart, told me that I have to go out of town to get the Windows 7 program because it would not load without Windows Vista.  I don't know if I need the program or the upgrade.  Help!

  If you have any problems with the information below, see if you can ask a tech-savvy friend of assistive technology.

  You must have a running and Vista enabled for upgrade of.

  You can't put a Vista non-boot.

  Here's how to try to repair your Vista operating system:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is how to reinstall Vista on your computer to the way you bought:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when he is running again.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• Installed SP2 for Vista now Facebook will not load

  First, hotmail would not work, I have to connect each time www.login.live.com .  I used for any type of www.hotmail.com and would be redirected.  Now it will not redirect, I have to sign in each time.  As mentioned, Facebook does not charge or the other.  I don't see any other update that did these two things stop working, this happened at the same time, then SP2 update.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  See if the information below helps you solve the problem/s you have with Internet Explorer:

  http://support.Microsoft.com/default.aspx/KB/936213/?p=1

  "How to optimize Internet Explorer"

  Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

  ·    You experience performance issues in Internet Explorer.

  ·    You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

  ·    Internet Explorer stops responding.

  This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936215

  "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

  This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936214/

  "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

  This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

  1 use the mode safe mode with networking

  2. perform a clean boot

  3. use another user account

  4 scan your computer against viruses and spyware

  5. run Internet Explorer 7 in "no Add-ons" mode

  Hope the above helps.

  ·                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also try the Forum from IE:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  See you soon.

  Mick Murphy - Microsoft partner

• Got the update of Firefox and now it hangs / crashes after loading homepage. Have been through the help pages Firefox but no change. Other browsers work well. Help! Best regards, Yuna

  Ive only been a Firefox user for many years now and get automatic updates without problem. But I got an update today, November 14, 2011 Australia and now Firefox crashes / freezes after loading the home page. I changed NOTHING else on my system at all. Other browsers work fine.
  I went through your help pages, but could not find anything that my help - I have a 5 year old laptop Dell with Windows 7 running. Ive never had any problems until now.

  Hey Yuna,

  Completely uninstall Firefox from your system. {http://kb.mozillazine.org/Uninstalling_firefox#On_Windows}

  You can download the latest version of Firefox from http://www.mozilla.org/en-US/firefox/fx/

  If you don't want to lose your bookmarks, you can back up your bookmarksbackups inside your profile directory {http://kb.mozillazine.org/Profile_folder} folder.