Laptop Dell Westinghouse tv via vga cable connection

Similar Questions

• the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

  See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

  Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

• HP laptop: unable to identify the lan cable connection

  Microsoft Windows [Version 6.3.9600]
  (c) Microsoft Corporation, 2013. All rights reserved.

  Rodriguez C:\Users\anshu > ipconfig/all

  Windows IP configuration

  Name of the host...: fadiga
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Working Group

  Ethernet connection to the Bluetooth 2 network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  #2
  Physical address.... : B0-10-41-80-AF-1E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 5:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Hosted network virtual card
  Physical address.... : B0-10-41-80-AF-1E
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 2:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Wi - Fi Direct virtual card
  Physical address.... : B0-10-41-80-AF-1F
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. : Working Group
  ... Description: RT3290 Ralink 802.11bgn wireless adapter
  Physical address.... : B0-10-41-80-AF-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e809:c01a:618f:7b5a %4 (Preferred)
  IPv4 address...: 192.16.137.4 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Saturday, June 11, 2016 08:56:13
  End of the lease...: Wednesday, June 15, 2016 12:56:15
  ... Default gateway. : 192.16.137.1.
  DHCP server...: 192.16.137.1.
  DHCPv6 IOOKING...: 78647361
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers...: 10.10.2.2.
  192.16.137.1
  NetBIOS over TCP/IP...: enabled

  Ethernet Ethernet adapter:

  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : 14-58-D0-C5-74-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::3070:15bf:b1ee:daab %3 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.218.171 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 51665104
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : Working Group
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:c010:8904:c010:8904 (Preferred)
  ... Default gateway. :
  DHCPv6 IOOKING...: 704643072
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers...: 10.10.2.2.
  192.16.137.1
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter ISATAP.workgroup:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Working Group
  ... Description: Adapter Microsoft ISATAP #5
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {74914F29-E819-4DEB-8CC2-D37CBFD70F3B}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #6
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Rodriguez C:\Users\anshu >

  On the lan cable connection, it says as unidentified network.

  That's what I have to type the command ipconfig/all.  I tried to reinstall drivers recvoery as Manager, but no results. It worked without problem until now

  @anshu645

  Home networks typically use a form any of 192.168.x.x

  For example:

  192.168.1.14

  Found in your example:

  192.16. 137.1

  Also found:

  Autoconfiguration IPv4 address. . : 169.254.218.171

  +++++++++++++++++++++++++++++++++++++++++++++

  I suspect that the installer with your home network router is misconfigured and the network can't find a viable (useful) DNS address to use for the purpose of ISP Internet Service (ISP) connection.

  Please see the following:

  HP PC - troubleshooting wired home networks (Windows 8)

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• When vga cable connection to tv message comes up not support on the TV screen

  When connection cable vga to tv to the computer message comes up not support on the TV screen

  There is a compatibility issue, which is that the TV is showing the signal it receives cannot be treated by the latter.

  If my suggestion is to look at the manual of the television or the manual online for television at his homesite to get 'accurate' requirements to connect your computer to the television, including DPI

  then see how you can get your computer to meet.

  you might need a buy a specialty graphics card (this is xp compatiable) who has the ability to convert computer and output to the TV signal.   in others, the graphics card can meet who needs the TV.

• Cannot connect computer laptop acer aspire 5630 screen via a cable vga to tv screen

  Original title: cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Hello

  1. If it works well before?
  2. Did you of recent changes to the computer before the show?
  3. What happens when you connect the VGA cable to TV to the laptop screen?

  I suggest to refer to the article and perform the steps mentioned there.

   

  How to configure and use multiple monitors in Windows XP:

  http://support.Microsoft.com/kb/307873

   

  Reference:--

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=S5itWxIFacJ

   

   

   

• When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Color problem

  When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Problem with the video card, cable or tv.  I will try to update the video driver first.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• No sound from the tv when connected via a laptop computer vga cable

  I connect my acer to a sanyo hd tv with a vga cable.  pictue is fine, but the sound only comes from my laptop, using windows 7

  Hello

  I suggest you refer to the link mentioned to ensure that Media Center has been configured properly with the TV below:

  Getting started with Windows Media Center

  You may also like to refer to the below mentioned link and check if the cables were connected as they are supposed to be:

  Connect your computer to a TV

  Note: If your computer is connected to a TV, notes that many video cards and cable types do not support audio signals. You may need to connect the sound card of your computer directly to your speakers.

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help! I cannot connect my laptop to my tv via a vga cable.

  I have a VGA cable that I used for a while now, to connect my laptop to a TV for use as a moniter... I never had no problem that until recently.  Now, the screen appears on the TV screen only when the laptop is starting up, but as soon as the program windows load and gets the TV turns off screen to the password screen.  However when I start the computer by using 'safe mode' I have no problem at all either... and to make things worse and more complicated the screen for my laptop is broken so I can't use it all.  Please help me with any suggestions as to what I might be able to make :(

  I have a VGA cable that I used for a while now, to connect my laptop to a TV for use as a moniter... I never had no problem that until recently.  Now, the screen appears on the TV screen only when the laptop is starting up, but as soon as the program windows load and gets the TV turns off screen to the password screen.  However when I start the computer by using 'safe mode' I have no problem at all either... and to make things worse and more complicated the screen for my laptop is broken so I can't use it all.  Please help me with any suggestions as to what I might be able to make :(

  =====================================
  I don't have a specific answer to your question, but I have recently
  had a similar problem with a connection "svideo to RCA cable.
  and the solution was to change the computer of
  resolution of the screen to a lower number. Also... I had to open
  nVidia control panel and select Clone. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Laptop computer connection TV via HDMI cable... no image. ?

  I'm trying to connect my laptop (Dell Inspiron 1525) to my TV via a HDMI cable.  Everything I read says with 2 HDMI devices enabled all what you need to do is to connect the two... but I'm going to diffuluty.  He continues to tell me that there is no signal, but both devices are connected.

  Any help is greatly appreciated!

  Hi Ashley... B,

  Thank you for visiting Microsoft Answers.

  Which version of Windows Vista is installed on your computer?

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.
  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
   
  Link to view:
  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center
   
  Hope the helps of information. Please post back and we do know.
  Kind regards
  Joel S

• No picture on Toshiba Regza TV connection via a desktop pc VGA cable

  Hello

  I need help to connect my desktop PC Fujitsu Siemens for my Toshiba Regza 37 '' TV via a VGA cable.

  I bought a VGA cable, assuming it would be plug-and-play work, far from it.
  What happens is that when I connect to PC & TV VGA cable and select mode PC the screen just flickers / flashes a black screen.

  I read a few articles that you have to press FN + F8 on laptop computers, but I don't have this option on my desktop pc.

  Any help would be appreciated. Thanks in advance

  Cheerz

  Hello

  FN + F8 enable and disable the WiFi network!
  You must use the FN + F5 key combination to switch to the external monitor.

  Please also check if the VGA channel is activated on your TV.
  Then use the FN + F5 for the external video output switching

  Big names

• I connected my xbox 360 to my laptop with the vga cable...

  I get the sound signal of a connected device, but nothing is on my screen. How can I fix it?
  It is a brand new in the package microsoft xbox 360 vga cable. Not a knockoff.
  Is my good enough laptop, the Toshiba netbook? Missing some necessary extra juice?

  Hi Surfszup,

  See the links below and check if it helps.

  The Xbox 360 console problems

   

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  When you use your console Xbox 360 with a Xbox 360 VGA HD cable, there is no audio data, or you see any video on your TV or monitor

  http://support.Microsoft.com/kb/907603

  Connect an XBOX 360 controller for Windows to a PC http://www.microsoft.com/nz/digitallife/gaming/how_to_connect_an_XBOX_360_controller_for_windows_to_a_computer.mspx

• laptop connected to an external monitor with vga cable issues?

  1The votefavorite

  I use a Sony Vaio e series laptop running windows 7 Home premium 64-bit, which I always connect to an external monitor with a VGA cable. I put graphics options to display only on the external monitor and I would like to close the lid of the laptop. In the power settings I put it do nothing when the lid closes. When it is connected to the external screen I am able to look at the screen very well if the lid of the laptop is open. But whenever I close the lid, the display on the external monitor is turned off. I have tried everything I can think of as the use of a keyboard to toggle the display, change the plan to plug the monitor off before and after and even more, to much to list etc. I actually did it on my HD TV using a Hdmi cable that allows me to close the lid. But I want to use it only on my monitor that is sadly only VGA. I know I'm not alone here, I found many forums on the same issue, but nobody seems to have an answer. It is always with the help of a VGA cable when I find others with the same problem. Does anyone know where a response? It seems either VGA may be quite old now since the introduction of HDMI, that Microsoft has not bothered to look on this or get out an update to resolve this issue. Sorry it's just very frustrating because cannot find an answer, and I don't like the laptop overheating or wasting money on energy.

  (1) right click on your power Option icon on the taskbar

  (2) will take you to Options below

  Control Panel:

  Choose what closing the lid"this choice is the 3rd in your list of choices

  The next screen will allow you to configure your choice:

  When I close the lid:

  On battery: do nothing and

  Plugged in: Do nothing

  This will prevent your system/video to go to sleep or stopping

  Hope this helps

• How to connect Dell latitude d600 to tv with vga cable to recognize TV

  When I go in the control panel and the external display connection layout juice has no opportunity to do so. It does not recognize my TV when well even the vga is plugged into the laptop a TV. the sum it please help. I tried the fn + f keys, and so on< and="">

  All I had to do was physically connect the PC to the TV with VGA cable then use

  Windows with P key

  for the TV as office extended & turn on the TV to display its VGA input.

  I then went to control panel, display, change the display settings.  In this page it Swing tour where she was [physically] in regards to the PC, I dragged the TV icon.

  I also saw that it offered different display settings for the TV but had to settle for the same thing that my PC screen using [which sounds logical, but I was tempted by the fact that she offered higher resolutions].

• Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

  Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

  Original title: VGA:

  In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

• How to connect a portable laptop Windows 8 with Windows 7 computer via Ethernet cable and transfer the data directly?

  I have a laptop Windows 8 . I want to connect to a new round of windows 7 and transfer the data at least 8 MB/s.

  Please send me the procedure to follow. I don't want to share Internet, but want to transfer data.

  You can do this, but you need a special type of Ethernet cable called a crossover cable.  This means the son in the swap position cables so that "send" and "receive" the computer two plugs can communicate.

  Learn more here: http://windows.microsoft.com/en-us/windows/connect-two-computers-crossover-cable#1TC=windows-7