HP laptop: unable to identify the lan cable connection

Similar Questions

• After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

  Hello..

  After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

  Hello

  1 windows operating system is installed on the computer?

  2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

  3. What is the number of brand and model of the computer?

  Method 1:

  If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  The link applies to the Windows Vista and Windows 7 operating system.

  Method 2:

  Check the link and try using the network troubleshooter to fix the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 3:

  See the link and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.

• No lights when the LAN cable is connected by Satellite A30-141

  I'm trying to connect my satellite A30 141 to a router using an rj45 plug. When I connect to the ethernet port, nothing happens. no lights on my laptop. someone at - it how to deal with this issue. I can reset the port of a Charter service engineers.

  any help would be much appreciated

  Hello

  I put t know which lamps do you mean because I don t find any LAN LEDs on this laptop. In case you I would recommend checking the status of LAN card in Device Manager. Check if this card has been properly recognized and if there is no yellow exclamation point.

  In addition, I put t know what you expect. If you connect the LAN cable to the laptop from the LAN icon in the taskbar should usually shows the connected state of LAN cable (NO red x). If you do not see this icon please activate this option in the properties of LAN.

• Toshiba NB550-111 - no connection if the LAN cable is more than 2 metres

  Hello

  My newly purchased Toshiba NB550-111(Windows 7 Starter Service Pack 1) has problems with the LAN card.
  If the LAN cable is more than 2 meters, no relation to Allied Telesyn switch (no indicator led on the switch, 2 other desktop computers already connected). I tried not to connect in a different port (one used previously by one of desktop computers), no connection. I tried with 3 cables, still no results.

  Cables (cat5E, so important) have been tested OK before with a cable Tester, and I use both of them without any problem with another 2 desktop computers at home. I set another cable (5 m long, newly purchased) and tested for connectivity. It works very well with the other two offices, no results with the netbook. I tried with adapter it works, I disabled ' energy efficient ethernet "NIC, still no connection properties page. It only connects if the cable is less than 2 meters. I tried to connect the netbook directly to the DSL router, still no connection with a longer cable.

  The device is reported by windows as work very well, and the test Toshiba utility ends there is no problem. Windows I configured in the Control Panel, the Plan balanced for maximum performance in the power options, still no results.
  Any ideas, please?

  Now maybe stupid question but what is with WLAN? You don t want to use WLAN?

• Satellite Pro P100 - unable to access the LAN

  This is the first time I want to use the LAN outlet. Where plug the LAN cable and the activation of the network connection are no response at all (light indicators do not work). Test the card gives a good result. I reinstalled the success of whithout pilot.
  What is a configuration problem?

  I use WINDOWS XP. Thank you.

  Hello

  Do you have a message on the limited connectivity from Windows?
  What is card LAN recognized correctly in Device Manager?

  You may need to check the configuration. You use DHCP or a static IP address? You should try it with static IP addresses.

  In addition, go to the command line (cmd) and type ipconfig / renew. What happens exactly?

• N300 not see the Lan cables

  Hello world!

  After the oath to a customer support agent, I decided to turn to the community that might better support than support Netgears AWEFUL!

  I tried a modem LAN cable connected to my PC, but nothing lights up on the modem telling me its plugged in, and nothing on the PC tells me that the LAN cable is pluged. I tried 2 different PC with 2 different LAN cables, both having same issue.

  Help, please!

  Kevin

  ZS - KEV

  Sorry I worded wrong, but in Network Center and sharing, then click on change adapter settings here you will see your connections and you can right click and allow it.

  DarrenM

• HP Officejet Pro X576dw: Wireless Direct Printing using the Lan cable

  Hello

  I buy HP Officejet Pro X576dw multifunctional on tomorrow. I understand that this printer has a direct wireless printing features that I can print from my tablet or IPad.

  But I doubt if this wireless direct printing can be done while the printer is connected to the network via Lan cable permanately IPV4.  This means I can print from my mobile phone at anytime via Wireless Direct without the Lan cable.  Kindly advice. Thanks in advance.

  David

  Oh, which means that you simply unplug the Direct SSID wireless and you should be able to print via your router LAN cable now.

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• The blue windows screen Driver_irql_not_less_or_equal 7 when connecting the LAN cable?

  Hi all,
  I just want to ask how to solve Driver_irql_not_less_or_equal windows 7 blue screen when connecting the LAN cable?
  pls help me...
  Thanks in advance...

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone".
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

• Printer prints not; Unable to identify the problem of troubleshooting

  I have a HP OfficeJet 6500 (OS is Windows 7) on a wireless network that do not print. . Ran the Printing Troubleshooter, but it has been unable to identify the problem.

  Hello

  1. when it changes on the computer prior to this question?

  2. do you get an error message when you try to print?

  3. If so, what is the exact error code/message you get?

  Perform the following methods and check:

  Method 1: Run the fixit from following link and:

  Problems printing and printing errors

  Automatically diagnose and repair when you cannot print or for problems setting up a printer, connecting to a network printer and related errors.

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps.

• Adobe Illustrator has been unable to identify the cause of the accident

  Hello

  Illustrator falls down initially to the top with this message:

  Adobe Illustrator has been unable to identify the cause of the accident.

  Try to launch illustrator again?

  When you try to load in the splash say: Diagnostic Test 18

  Help would be greatly appreciated!

  What version?

  What system?

  Third-party plug-ins?

  No special equipment - A Wacom?

  Are all 100% OK fonts?

  It has never worked?

  You just update the system or Illustrator?

  What eactly happens step by step?

  At what point in the boot process it crash?

• Siebel Database Configuration Assistant unable to identify the indexes tablespace

  Hello
  
  I install Siebel CRM 8.1.1 on AIX platform. We have a RAC database has allowed the backend and that two tablespace is created, other data and another for the index. Now in the wizrd of configuration database to the name of these two storage spaces; provide us with the name of tablespae of data in the Tablespace filed Table and index tablespace in the tablespace index rating of the Setup Wizard. Now when we click on the next button. The wizrd of configuration gives error of unable to identify the indexes tablespace.
  
  Why is - what happens as index tablespace is correctly created in the database. Please help me in this. Quick Respance you will be appreciated.
  
  Kind regards
  
  Abgrall

  If you ran:

  change the quota unlimited on user SIEBEL

  ?

• Of crashes/blue Equium A60 laptop screen when the LAN cable is in?

  Hi all
  I have a laptop Toshiba Equium A60 which now extends for less than a year.
  I am running WinXp Sp2

  Yesterday, my laptop started to plant flashing a blue screen (not the time to see what he says that the computer reboots too quickly).

  I found that only apparently failed when the network cable is connected for example if I start the laptop, it will be put in service as usual, but when it starts to communicate with the network/router (I see glancing at blue screens in the lower Task Bar to the right), it crashes. I tried another port on the router but no luck.

  Is my network card: Realtek RTL8139/810 x Family Fast Ethernet NIC

  It works well in Safe mode and doesn't crash.

  I updated the driver but and it's always the same.

  I then decided to restore my laptop to factory/day via the Toshiba Recovery DVD.

  When it worked fine all day restored (had internet access via the network) until I clicked on: set up a home network or small business in the control panel. He crashed again in the same way. Now it will crash repeatedly like above.

  This could be a problem with my cable?
  Help, please... Any ideas?

  Thank you for the charges,
  Shay

  Hello

  If the network connection works fine, it is not necessary to set it up again. I guess there are conflicts and the unit freezes. In my opinion there is no problem with the hardware or with your cable with the network settings.

• Unable to release the keyboard cable in Omnibook XE2

  Hello world

  This is my first post here and it's probably going to be a silly question but I am a novice when it comes to disassemble the laptop so I thought I might as well ask people who know better things that I don't want to spoil anything.

  I have this old Omnibook XE2 I started to disassemble but got stuck because I cannot remove the keyboard connector cable. The Service Manual shows both sides of the cable and then gently pull upwards, but it won't come out this way. Happens a little when I shoot, but I pull hard enough and I fear I'm going to break something. I thought there might be a lock or a clip that must be open to pull the cord, but as I've never done this before, I am a little hesitant on how to do it.

  I enclose a few photos so you can see what the connector looks like.

  

  

  Any help is appreciated.

  See you soon,.

  Laszlo

  Hello lackua,

  You must unplug the Ribbon for the keyboard cable.

  You will need to remove the base plastic too; It should be part of the Ribbon.

  I would like to know how everything goes.

  Nice day.

• BlackBerry Smartphones unable to identify the icon

  Hello, this is my first post in this forum after hidden for a few months.

  After searching the forums, I am unable to identify an icon that appears at the top right of my screen.  It seems to appear mostly when I go into my Contacts (although I'm sure I saw it elsewhere, too).

  Two upside down triangles, right one slightly lower than the left, over a box or tray.  Can anyone put my mind at ease?  I looked in the manual supplied with the phone, and in these forums and can't find the answer.

  Either way, I love this phone!  I fell for the first time the other day (the last time!) and moved very quickly to retrieve it, looks like I dropped a baby!

  Thanks for your comments.

  * SOLVED -it seems to be the icon that is displayed when the Multitap is the active keyboard portrait.

  The upper right corner of your phone must have the network and the meter.  I think what you're talking about is when the phone is really looking for a signal stronger and I think he has those triangles with arrows pointing if I remember correctly.  Generally, your phone will be on 1XEV but occasionally as he's on 1 X and when he switches back, it's probably what you see.