Laptop does not restart. Shows cannot start windows

Similar Questions

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• My laptop does not connect to Wifi? "Windows could not connect to Eden."

  My laptop does not connect to my motorala home router. It won't yet allow access to the router, the second I click on connect it says
  "Windows could not connect to Eden." Eden is the ssid of the router. There before I changed the operating system on my computer. But I don't think that's the problem. Now, it connects to any other wireless router but not my own. I installed Windows 7. Can someone help me please! If more information is needed, I'd be happy to post. Any help is appreciated.

  Hello

  I would suggest you follow the given steps and check if it helps

  Method 1: Network connection problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For your reference: Setting up a wireless network: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

  Hope this information is useful.

• April security updates Windows Vista caused laptop does not restart!

  Update security for Windows Vista (KB3045685)
  Update security for Windows Vista (KB3045999)
  Update security for Windows Vista (KB3046306)
  Update security for Windows Vista (KB3046482)

  Message box, something went from an unusual way to term in the registry.

  He had no numbers...

  1 Windows auto updater installed 10 updated important. On reboot,.

  my Toshiba laptop wouldn't start to ANY connection and is gone to the message box.

  I started in safe mode and did a system restored.

  2 tried to reinstall but only with the updates listed above, 4 KB not the 10.

  SAME message. Again once restore safe mode.

  Anyone know who the 4 updates do not use?

  I also stopped the automatic update.

  Any solution? I would like to take back with updates.

  I have not tried the 4 update above 1 both because the recovery mode is

  a lot of time and frustrating. Microsoft should have some answers...

  Hello

  Thanks for the post.

  Disconnect any attached external devices.

  If you use a third-party antivirus disable and then install updates and check.

  Temporarily turn off the firewall and antivirus software and try to install the updates.
  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-Vista

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  If this does not help, then I suggest you to put the computer in a clean boot state and then install. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

  Try this and let us know the results.

• NIC does not: "this device cannot start. (Code 10) »

  My internet connection does not work (although I can always get a wireless connection) to my computer. The "82567V-2 network connection intel Gigabit ' says"this device cannot start. (Code 10) ». I've updated all the drivers. If the material is broken-how would I replace/fix it?

  Hey Tyler,

  1 you can use the wired connection before with no problems?

  2 did you a recent software or hardware changes to the system?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows.

  You can try to uninstall and reinstall the network adapter:

  a. click Start and type in Device Manager in the start search and press enter.

  b. expand the network adapters in the Device Manager

  c. right-click on the device and click on Properties.

  d. click on Driver tab and click on uninstall the drivers and then OK.

  e. restart the computer and check.

  You can also see the Intel support Web site and try to install the latest version of the network adapter drivers.

  For more information, see the articles:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  Wireless and wired network problems

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• My laptop does not restart

  After a few problems recently that my laptop will not reboot the screen displays the following

  Windows could not start. a recent hardware or software could be the cause. to solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click Next.
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  file:\Windows\system32\winload.exe
  status: 0xc000000e
  Info: the selected entry could not be found because the application is missing or damaged.

  As you can understand that I have no disk because none has been supplied with the laptop.
  Any help would be greatly appreciated, thanks, Kev

  Hello

  If you have latest model cell phone you should read instructions and manuals s how to create DVDs of recovery which can be used for the installation of the OS, if something goes wrong with preinstalled OS image or saved on the HARD drive HARD drive.

  What model of laptop do you have?

• Laptop does not charger and cannot get into the Bios, help!

  Hi, I own an Acer Aspire 6935 G, so far he treated me so. Recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but on my charger fuse blew!

  Then I took another replacement just to the case where there has been previous replacement I bought and nothing major, new replacement seems to work well (lighs load lights up) but it does not all power in the laptop. Witnesses of load lights as indicated, but the laptop won't before the Acer splash screen. Due to the battery being dead, I can't access bios set up so I can check the status of my laptop not enter recovery. I was wondering if it could be something other than a hardware problem, and if this is the case; It is expensive to do is fixed or am I better off buying a new laptop?

  Thanks in advance!

  This is a:

  Acer Aspire

  6935G

  Intel Core DuoT6400

  4 GB OF RAM

  Windows 7 Ultimate

  Edit: There is think beep when the chargers plugged into the lapto, if that makes a difference?

  Lugman > recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but blew the fuse on my charger! >>>

  Sorry, but it does look like a hardware problem. Sounds like the power supply may be about to blow another fuse. I think you have a short or large scale electric leakage somewhere that prevents charging of the battery and power - it but maybe not enough (yet) to blow another fuse or switch off the LEDs.

  First remove the battery and power connections before you tear things. The first place I would look is around the port of loading where your problems started and hope that it's not deeper in the system where it can cause some MB or more serious damage. Look for the places where the lines of welding on the System Board may be in contact with a screw or a metal on the ground. While you're there, reconnect both ends of all accessible Ribbon (like the video and keyboard) connectors. Also to the HARD drive, modules of memory vivid and all the other connectors for component for good measure.

  Once you have checked everything, and before you have wound all caches and screws, see if you can carefully insert the battery into the receptacle and plug the charger. Don't try to power. You can do this on an insulating surface to avoid the land of naked drivers. The LED light looks like he is in charge? If so, let it continue to charge without trying to power on. I think after 4-5 hours, the led that would indicate a fully charged battery. If so, I would try and then power on. If not, and it's still seems to be in charge, stop, do not try to and we will draw the next steps.

  Jack E/NJ

• My computer does not restart. It starts, but it does not appear how it restarts. Any suggestions?

  Restart my computer, but it does not appear how it restarts. I am trying to get into safe mode, but I don't see the menus. My

  computer runs on XP. Any suggestions?

  Hi ziggysepthm,

  ·         You see the desktop after that it starts completely?

  ·         Did you check if the monitor is connected correctly?

  Check the monitor cable if it is connected properly.

  Check to see if this article helps you.

  Advanced Troubleshooting for General startup problems in Windows XP

• Keyboard does not work when I start windows

  my keyboard does not work when I boot my laptop.   When I do any changes inside through properties keybord (even the spped blinking cursor) he started working. but when I press capslock, it stops working again and I have to still to change the settings in the keyboard properties to make work.i have tried to install the new software, I got my laptop to format but it still does not.

  need help with this and please tell me the solution if r there all

  If by "I got my laptop to format", you mean you have reinstalled Windows and the problem persists, it is probably a hardware problem. If you have a keyboard that can be plugged into your laptop, there the same problem?

• Integrated microphone does not and shows to connect Windows Vista

  My microphone does not work, even not show as connected in (microphone) Windows vista

  Hi my microphone has problems. It works sometimes, but usually it does not. I don't know why it is, but maybe someone here can help you. It is really connected and activated, but it does not usually record as being connected. Does it only occasionally. I don't know if something is different when the microphone is, can't remember. I downloaded the latest drivers and have updated their but that did not help. I still have the same problem. Also, it seems that all audio services are running. So if anyone knows the solution I would be grateful.

  If you microphone/Line In set is activated and levels turned up, this is how its window should look like. Note the bar showing the Green microphone resumes his.

  

• Penn tablet function does not work. Cannot start the HID device

  On my Portege M200, I reinstalled WXP Tablet 2005. Under human interface devices, it detects a serial penn wacom tablet, a device interface human usb and an hid-compliant device.

  But penn isn't all fucntion. When I install the latest drivers from wacom penabled, I get a "wacom penabled HID minidriver" device but it has a yellow triangle with the error this device cannot start error 10.

  Is my tablet broken?

  (apparently you can not say penn on this forum)

  Hello

  May I ask where did you download the driver?
  It seems that the driver is not supported or is not compatible.
  Code 10 means-> device could not start.
  You simply need to use the driver from the Toshiba page and click on update driver to update the drivers for this device.

• Judgment of my laptop for an update. It does not restart. shows! 0xc0190036! 600/52363 (ieapfltr.d]])

  Help, please

  Hello

  Thank you for choosing Windows Vista answers forums.

  Looks like this problem has occurred after the installation of the Service Pack through Windows update. I posted an article to the knowledge base that speaks exactly the error message that you get after installing the updates. Follow the steps mentioned in the article, and check whether you can solve the problem. Please let us know if you have any questions as a result of the article.

  Error code on a black screen when you try to install a Service Pack in Windows Vista: "0xc0190036."

  http://support.Microsoft.com/kb/975430

  Concerning
  Anthony.

• Laptop does not accept the password after Windows update

  Last Thursday my computer set up regular updates as usual.  When I restarted the computer, it cannot accept my password to complete the start-up operation.  I checked that I had the correct password and caps was off.  Now cannot access the laptop at all.  It is configured with Windows Vista, is a computer dell laptop and I bought it at the beginning of 2009. It seems that I never put a password reset disk and I don't have the original installation disc of vista with me - it all happened to be loaded.  Tips to get again access my laptop?

  Hello

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Brand new laptop does not come with disks of windows, I need to reinstall windows what/where/how do I?

  I bought 2 new laptops. Both come with Windows already... so, if I need to reinstall windows... How/where/can do?

  Hello

  For future reference, these are VISTA forums you want on the new laptops in.

  I suggest other questions about these laptops you ask in the correct Forums.

  Here are the General options of relocation for you:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  See you soon.

• Laptop does not restart after complete recovery

  Hello

  G61 401SA laptop: Windows 7 64-bit.

  I replaced a hard drive fault and used the recovery disc to re - install. All loading software and it says to remove it from your drive and continue to restart.

  I did this and it is only with - "No Bootable device - insert boot disk and Press any key"

  I ran the recovery many times, but each time what happens with the same problem.

  Anyone know what I can do, or how to fix this?

  Thank you

  Hi David,

  Thank you for your support.

  The problem is resolved.

  A little history on how - I did as suggested and created a Windows7 install disc.

  However, before doing so, I tried the original on a different hard drive used recovery disks. They loaded correctly and all worked.

  I then tried again on the new drive (which I had already formatted on another computer, just in case). Once again they load but returned with "No. Bootable device.

  Then used the newly created Windows installation disc, which installed correctly.

  Then, I used again recovery disks on the now used drive which worked well. So no need to download all the drivers etc as all back by default.

  We always bought HP, however this including my experience with their terrible support and the fact that I had two of the PSU and a screen fail recently left a very bitter taste.

  Thanks again,

  TLC