My laptop does not restart

Similar Questions

• Laptop does not restart. Shows cannot start windows

  Computer shows "Windows Error Recovery" and offers two options 'launch Startup Repair' or 'start windows normally '.  I did both and the computer does not restart.
  If I select "start windows normally" it returns to the screen allowing you to start two options and default settings for the "repair starting."  He then proceeds to system recovery options, but then restarts to the two options under the "windows Error Recovery".  It seems to be stuck in a loop.

  I removed the battery, etc. rebooted several times but seems to make no difference.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• April security updates Windows Vista caused laptop does not restart!

  Update security for Windows Vista (KB3045685)
  Update security for Windows Vista (KB3045999)
  Update security for Windows Vista (KB3046306)
  Update security for Windows Vista (KB3046482)

  Message box, something went from an unusual way to term in the registry.

  He had no numbers...

  1 Windows auto updater installed 10 updated important. On reboot,.

  my Toshiba laptop wouldn't start to ANY connection and is gone to the message box.

  I started in safe mode and did a system restored.

  2 tried to reinstall but only with the updates listed above, 4 KB not the 10.

  SAME message. Again once restore safe mode.

  Anyone know who the 4 updates do not use?

  I also stopped the automatic update.

  Any solution? I would like to take back with updates.

  I have not tried the 4 update above 1 both because the recovery mode is

  a lot of time and frustrating. Microsoft should have some answers...

  Hello

  Thanks for the post.

  Disconnect any attached external devices.

  If you use a third-party antivirus disable and then install updates and check.

  Temporarily turn off the firewall and antivirus software and try to install the updates.
  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-Vista

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  If this does not help, then I suggest you to put the computer in a clean boot state and then install. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

  Try this and let us know the results.

• Laptop does not restart after complete recovery

  Hello

  G61 401SA laptop: Windows 7 64-bit.

  I replaced a hard drive fault and used the recovery disc to re - install. All loading software and it says to remove it from your drive and continue to restart.

  I did this and it is only with - "No Bootable device - insert boot disk and Press any key"

  I ran the recovery many times, but each time what happens with the same problem.

  Anyone know what I can do, or how to fix this?

  Thank you

  Hi David,

  Thank you for your support.

  The problem is resolved.

  A little history on how - I did as suggested and created a Windows7 install disc.

  However, before doing so, I tried the original on a different hard drive used recovery disks. They loaded correctly and all worked.

  I then tried again on the new drive (which I had already formatted on another computer, just in case). Once again they load but returned with "No. Bootable device.

  Then used the newly created Windows installation disc, which installed correctly.

  Then, I used again recovery disks on the now used drive which worked well. So no need to download all the drivers etc as all back by default.

  We always bought HP, however this including my experience with their terrible support and the fact that I had two of the PSU and a screen fail recently left a very bitter taste.

  Thanks again,

  TLC

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye

• This morning update of Firefox has been downloaded but does not restart the laptop. He's trying to start and the lights on the keyboard. He continually tries to restart. The screen is blank. It was working fine until I clicked on restart.

  PC IS A COMPAQ PRESARIO V6000 RUNNING WINDOWS XP

  PC DOES NOT RESTART AFTER THE LAST FIREFOX DOWNLOAD THIS MORNING

  The PC screen does not light and I think he's dead. It can be quite fortuitous, and there may be a hardware failure that he would have stopped working even without the download of firefox. I'll have to consider Repair shop and see if anything can be saved on the hard disk.

  Thanks anyway

  Dave

• I have a dell laptop with a battery defective im trying to reinstall vista on it, but it does not restart when it just stops

  I have a dell Inspiron 1720 and im expected to receive a new battery. Im trying to reinstall windows vista on it with the power cable plugged in that the current farm has no power.

  When windows needs to restart as he repeatedly does what installation it does not restart it just stops, no matter which please confirm that Jose the fault of batteries.

  I have a dell Inspiron 1720 and im expected to receive a new battery. Im trying to reinstall windows vista on it with the power cable plugged in that the current farm has no power.

  When windows needs to restart as he repeatedly does what installation it does not restart it just stops, no matter which please confirm that Jose the fault of batteries.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turning-off-your-computer-properly

  http://support.euro.Dell.com/support/eDOCS/systems/ins1720/en/om_en/PDF/DT5494MR.PDF

• Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

  My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

  Ruizgeraldine

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

  The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.
  
  I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  You must download and install the full feature software and drivers for the printer.
  
  Then unplug the printer and install the software.
  
  Do reconnect the printer until the installation program invited to do so.
  
  Once the installation is complete, restart.
  
  You should then be able to use your printer in Win10.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• iTunes on my laptop does not recognize my iPhone 6. My laptop, it is just the iTunes is not working.

  iTunes on my laptop does not recognize my iPhone 6. My laptop, it is just the iTunes is not working.

  If you do not see your device in iTunes for Mac - Apple-Support - https://support.apple.com/HT203979

  Device are not not immediately after the upgrade - https://discussions.apple.com/thread/6573744 - try to restart

  You don't say anything on your computer.  I don't even know if it's a Mac or a PC. This may apply to you:

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Equium A60 does not restart

  Hello

  My Equium A60 which I had since almost two years earlier this week crashed and does not restart. I met previous problems of slowness and the computer laptop closing (which I believe was down to heat), but it's much more serious.

  All that happens when I pass on is a black screen is displayed, as if the monitor does not work, and then after a few minutes it turns off, there is nothing really to go. Is there anyway I can record what's on my hard drive or who lost? Any help would be appreciated.

  Thank you

  You can try to connect the HARD drive to another laptop or desktop as an external device using the USB HDD box. The disc HARD should be recognized automatically and you can copy all of your files.

  Of course, this is possible if the HARD drive is not defective. I did several times with my old Satellite 1900 HDD. No problem at all.

  On your device, I can tell you just follow: after pressing the power button / stop if there is no activity (HDD led, display, the cooling fan noise) I guess the unit must be controlled by the service.

• Laptop does not stop automatically.

  Hello

  I have a HP 2000 t - 2d 00 CTO Notebook PC, model: D6Q45AV.

  While I turned off my laptop, the computer stops with the message saying Shutting Down as usual.

  However when the screen goes black, the power is still on (lights are always on) and the computer does not turn off.

  I waited until she goes off automatically 15 minutes, but instead, I held the power button to close manually.

  Also, I can't restart the computer or put it on the mode 'sleep'.

  When I restart the computer, the reboot screen appears only and does not restart the computer.

  While he was trying to put the computer on the mode 'sleep', the corners of the black screen, but still power is still on.

  This has happened since this morning.

  Last night, when I stopped, I got the message Shutting Down, the screen is black and the computer shut down in 10 seconds (all LEDs are off) as it normally should.

  Y at - it a software update that would solve this problem?

  Thank you.

  -Eric

  Hello

  Thursday, I went on board: programs and features: I clicked on SUVs installed updates.

  I clicked on the KB3000850 Windows Update from Nov - 25 and uninstalled.

  The computer took about an hour and a half to uninstall after reboot.

  I tested if the computer sleep mode worked by closing the lid of the laptop.

  Finally, he fell asleep mode correctly.

  When I opened the laptop, he is risen, as he should.

  Now stop, restart and sleep function properly.

  I think the problem was the update.

  -Eric

• R7000 does not restart after hitting the buttons wireless & WPS

  Need help on my r7000. It has been installed and works fine for months but my son hit the WPS Wifi buttons and now it does not restart. I have just the lights power & internet on

  I must say that I am tech challenged & currently without laptop or PC. I think that I installed with a laptop computer and wonder if I need a connection difficult to solve this problem. I have just an iPad & iPhone right now.

  I thought that to reset the router through genius, but it won't let me connect. I was connected to the router with iPhone & I tried iPad too but same result.

  Do I have to restore the settings to factory & b If Yes, can I install without connection to a PC? I have Comcast modem & wifi.

  All hep much appreciated.

  I had to do a hard reset but it worked. Thank you for your advice

  Problem resolved

• My Toshiba laptop does not work

  I don't have a Toshiba Satellite laptop model. PSAFGU-03J002.

  I was updating to windows Vista, the usual update reminders. When he finished the due computer reboot again, but she does not restart in its usual settings. I tried safe mode but it turns off automatically and takes me in Startup Repair where I wanted it restore the usual parameters when it worked, but it takes more than two hours and he has not yet return to its regular settings.

  I can't even log. And, I do not have the original recovery disk came with the laptop, because it served as a second hand. I'd really appreciate it if someone responds, I'm not computer savvy, but I need it also works and this is my last option, because I have to come to the final and I can't pay right now for computer technology.

  Help, please!

  To be honest I did not understand what you did, but I imagine that you have started your computer in safe mode and tried to roll back OS to an earlier time using System Restore tool. Right?

  I want to say that if this help not scared, you need to install the OS by using the facilities of Microsoft disk.
  All the necessary drivers, which you can download at Toshiba support and download page.

• my new laptop does not detect the USB for installing the os

  I bought the new laptop hp 15D009TU . I want to install win7 in there. I have OS configuration is USB, but my laptop does not detect my

  USB key... Please solve this problem as soon as possible...

  Hello

  Install the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66210.exe

  Restart the laptop, then install the driver usb 3.0 below.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66211.exe

  DP - K

• HP-gs61-110sa: help! laptop does not start

  Help, please! Laptop does not start. Looking at the black screen with cursor flashing at the top left.

  Hello

  If you do not, use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD ( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the CD to repair.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the CD from repair and try to restart the laptop.

  Kind regards

  DP - K