Laptop doesn't say no boot device found no hard disk 3F0 operating system

Similar Questions

• HP pavlion 15: Please HELP NO BOOT DEVICE FOUND

  I have a hp laptop that says no boot device found I checked the bios on that everything was the same so I won't change anything and I went to system dignotcts it wouldint work, that I keep for a day and today I keep the battary on the 5 min a6 and I put back my laptop truned it once again, and when he returned to no devices found Boot sccern I clicked on before F2 was a black is a blue fantasy the left now, and then Pentecost on the other one i made the screen a chip test passad I did another test it passed now what I do?

  If troubleshooting does not solve your problem, you need to perform a factory restore or using the partition recovery or recovery discs I hope that you created when you first got the computer:

  http://support.HP.com/us-en/document/c01443463

• I have HP notebook: no boot device found after the death of the computer during the update

  During an update my PC is dead, I know it must have been plugged and now boots to no device found startup please install an operating system on your hard drive

  Hello

  Try the following.

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to which typre of media you created, then click on enter – if you are prompted to "Press any key to continue...". "- make.

  Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

  http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

  Then try to run the system restore Windows to return the laptop to a point in time before that happen this isssue - see Option 1 on the link below for more information on this procedure.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

  Kind regards

  DP - K

• my laptop can not get the boot device

  When I turn on my old laptop, it goes to bios and saying: no boot device available strike f1 to not to retry boot, f2 configuration utility, no other options. all get any idea for this problem thx allllllllllllllllll

  Hi isaaq,.

  It may be a loose cable connection or the drive may have failed.

  Since it is a laptop, the support option are limited.

  Depending on the age of the PC, you can contact the manufacturer to see if there is a diagnostic program.

  According to the OEM, your recovery disc can have a method of repair installation if it is not hardware fault.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message is Boot Device not found, Hard - Disk (3F0)

  Hello!

  I have PC HP Pavilion dv6 with operativ system windows vista Entertaiment. I got an error as Boot Device not found. Please install an operating system on your hard drive. Disk-hard (3F0) Recovery does not work and received the error 100a

  Please help me

  Kamal

  It seems that the hard drive has failed and needs to be replaced. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 320GB hard drive you can use a 500 GB hard drive but not a hard drive of 250 GB.

• W95 installation fails-"no boot device found" / "not received no boot file name.

  I bought Windows Vista Home Premium Upgrade, which requires that a BONE House early to be installed before it will be to be installed. So, I need to install Windows 95, the only other version of windows 'House' that I have, before I can install Vista.

  Unfortunately, no matter what I try (install from CD with auto detect, install from the CD with the specification of physical drive, install from disk image), I get the error "no boot file received" Windows and then the "no boot device found" error on VMWare.  It is with version 2.02, running in OSX 10.5.6.

  Can anyone help?

  Thank you.

  First Windows 95 isn't eligible OS to upgrade to Vista from and regarding Windows Vista Home Premium Upgrade you can only do a place in family Windows XP Edition upgrade and Windows XP Media Center, which means any other previous operating system will have to be removed before you can install.

  In any case we say used to be able to install Windows Vista directly from an upgrade, even if it was with the original version and I n not know if it works with an SP1 DVD but take a look on: How to Clean install Windows Vista with upgrade media

• BCA install Win 10 since El Capitan "no boot device found". »

  I ran a Boot Camp for Windows 10 installation process using this configuration:

  MacPro3, 1

  El Capitan 10.11.2.

  Win10_1511_English_x64.

  Boot Camp Assistant 6.0.0

  I used a flash drive USB 2 for the installation disc.

  I modified the plist BCA as shown here:

  http://Tsentas.NET/create-a-Windows-7-or-later-version-install-disk-missing-on-e l-capitan.

  BCA works well, downloads support, creates what looks like appropriate on the USB installation files, and then create a MS-DOS (FAT32) partition on a hard disk that is dedicated in an internal Bay. At this point, it seems to be trying to boot from a Windows installation process and rise black screen "no boot device found... etc."

  Any idea whats up?

  Thank you, Bruce T

  Create a USB key modifying the Info.plist file does not work? There is a reason that it's missing at first, meaning that your specific model, with an integrated optical drive, needs to use a physical DVD. You can burn a DVD from ISO?

  Be aware that a 2008 MP has no W10 driver supported by Apple. A list of Macs Apple officially support it to use 10 Windows on your Mac with Boot Camp - Apple Support .

• I screwed up trying to install windows on my computer 10 and I XE off installer and now its says "no boot device - insert boot disk and press any key".

  I was just trying to download 10 on my computer windows using boot camp assistant. I answered the questions for windows when you need to respond as what kind of language you use and then I messed up on one of the questions. I didn't know how to go back so I just pressed the red x. When I did that he must get off my computer and when it's done I got a black screen and then it says "No boot device - insert boot disk and press any key" I don't know what he meant by no bootable disk and I was hoping that you guys can help me fix.

  If stop you your Mac and your power it back up and hold down the Alt/Option key, you see a Windows selection? If so try to select and see if the installation will continue.

• not found boot device. Please install a drive of system.hard of operation (3FO) past all the hard drive test

  not found boot device. Please install a drive of system.hard of operation (3FO) passed all the test drive I get this message after the recovery disc 1 stops at 36% and tells me to put in disk 2, I just discovered that my grandson was trying to help me by resetting my computer from factory settings off he thinks about 27% complete , it is only 8 and just trying to help this computer is only a few weeks was a Christmas gift its my fault for complaing about windows 8, can someone help me please thanks in advance

  I solved this problem myself thanks all syudents there to post what you've tried I went to bios and disabled the startup enabled legacey mode sucure tried to go to the Boot Manager it was my boot devices tried to use recovery disc recived the same message I have reset to factory settings and was able to reinstall windows normally

• Black screen showing F2 set up and start up F12 on the Vista Start menu and saying "no boot device."

  Original title: Windows Vista has stopped working

  I turn on the computer and Vista will not load.  Black screen that shows set up F2 and F12 boot menu.  Then after a few seconds it says: no boot device.   I know not if I reinstall vista with a disc, then it will be a new installation.  I lose all my files and documents?  Is it possible to recover?

  Hi Ladybel,

  You must contact the Local tech-store and check the hard disk for errors.

• My laptop isn't just saying no boot device - please reboot the system.

  Please please please help me I can't do anything with my laptop, I pressed the power button, but the same message appears every time and I don't know what to do I tried pressing a button or two on the keyboard, but the message came under a just and repeated that the system I have is an INDIVIDUAL C855D TOSHIBA - 13N and it has windows 8. I desperately need to get up and running works correctly in as soon as possible I am in major panic like don't know what to do.

  I also want to thank you for the advice given earlier I take note of it that were unable to try anything, but I appreciate the input considerably.

  Hi LindseyMarsh,

  Thanks for posting the request in the Microsoft community!
  I understand that the computer Toshiba laptop says "no boot system reboot device please. Try the suggestions and check if it helps to resolve the issue.

  Method 1:
  You can try to repair the computer:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  Method 2:

  If the computer does not boot the system from windows DVD then it could be a setting in the BIOS that is not compatible to windows startup 8 DVD or it's hardware

  You can make sure that the boot order is correct in the BIOS (Basic Input Output System), and the video card settings.

  For all related parameters of the BIOS, I suggest you to contact the manufacturer for support.

  BIOS settings are different for the different computer based on the motherboard manufacturer and the key to enter the BIOS can vary.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Just reply with the results. I'd be happy to help you further.

• no boot device found message after that finishing recovery disks and restart...

  I recently bought a new Wester Digital hard drive my laptop HP provided with is death/failed, but now I have no found boot device / error message even after complete installation floppies and disk 4 is ejected.  He did the whole insert the disc 1, 2, 3 and 4, and he went to 100%, then said to remove recovery media and press on continue, so that he can restart and complete the process, but it just reboots the computer, gets the no boot message device and stays there.  There's too much during the night and still the same message.  After disc 4 finished what she also said not to touch anything or do something, so I did everything, he said to do.  The hard drive is new, as I said, and is the same 500 GB which was the one I replaced.  The recovery disc were not created by me, they came with my laptop when I bought from futureshop in late October 2010.  It is out of warranty too, that's why I'm looking for a solution...

  Any help would be welcome...

  I did something else I looked and everything got up and running, so it's all good now.

• Only brand new XPS 13 no boot device found

  Hello, I just received my brand new 13 XPS in the mail today, when I opened and turned it top read "no found boot device, press a key to restart your computer."  After several attempts to reboot and also starting for other boot on the portable devices (' Windows manager and partition itself "none of them have solved the problem.)  From what I understand this, is this a problem with the hardware with the SSD on the laptop? Or is there something I can do which will fix this problem?

  Check to make sure that it is in mode UEFI and secure startup is enabled.  If both are set, yes - the ssd is likely bad.  Send the replacement system - it is absolutely useless to have a whole new system of DOA torn apart for repair.

• Pavilion: Boot Device not found install an operating system from hard disk (3F0) hit administrator 69599233

  Device not found Boot Install an operating system press F10 to reset factory and she request password have my pw does not give me the code 69599233

  Hello

  Thanks for posting in the HP Support forum. Welcome Onbord!

  Regarding the admin code you have give, please keep the power button hold for a while until that the PC stops. Repeat using the power button and

  as soon as you do, keep hitting the key Esc (as tap-tap-tap) - you will enter boot HP like this menu:

  

  Press F10 to enter the BIOS and when it asks for password, please enter this code 76491815 to ENTER.

  Follow the on-screen instructions to change the password or delete.

• New hard disk identified but causes the error "no boot device found".

  Hello

  Recently my computer (Inspiron 15 3521) had hard drive failures, so I ran a diagnosis which resulted in replace me the hard drive. I thought I would upgrade the old 500 GB for a hard drive of tuberculosis.

  Now, when I install the new hard drive, that it translates "found no boot device" I ran diagnostics on it and checked everything, and it recognizes the hard disk. Diagnosis is nothing but the problem persists. Any help would be great!

  The fundamental question: you have installed Windows on the drive?  New disks arrive Virgin - you'll need the support of recovery do you when you have received the system to install the operating system on the disk.