Laptop DV1000 with the new Windows XP SP3 and the problem with drivers

Similar Questions

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• HP Officejet software 4620e Windows XP SP3 and the base driver installation problems

  I am running Windows XP SP3 and installed the software the printer HP Oficejet 4620e and, when it is finished installing, all I see are two pages of text of the code.  In addition, the printing software disables my wireless network connection and I need to fix the adapter wireless network at regular intervals.  I uninstalled the printer software and installed 4620e HP basic driver software that HP offers as an alternative for computers that cannot use the full package.  I get the same results with the HP basic driver package 4620e as with the complete software package (two screens of text of the code).

  Please help.

  _________________________________________________________
  JOHN

  The reason why the pages are open as code is because something has changed to the association of files of these types of files.  The discussion below describes the problem on a 6520 and offers a solution for it.  Try this patch and let me know what happens.

  HP Photosmart 6520 "printer assistant" will not work

  The problem with the printer lock up your computer is caused by ink alerts defined as always, and because the analysis of the functionality of the computer is turned on.  The document below will guide you through fixing the problem.  Let me know what happens.

  Printer loses the network connection in Windows XP after the computer is turned on for four to 12 hours

• I use Windows XP SP3 and cannot open My Documents, my pictures, my music and my computer

  Original title: can not open files

  I use Windows XP SP3 and cannot open My Documents, my pictures, my music and my computer. I get no errors, but nothing happens when I click on one of them.

  Hello

  Thanks for the reply. I managed to solve the problem before you receive your advice to defragment my hard drive. I had the problem on / off power for about six months and defragmentation has not always been successful success so when it happens then I will go through the procedures that you have listed. I have installed and uninstalled various applications in the last six months and suspect that the register is not in optimum condition... I have a problem during a shutdown or reboot stop where I get an error of tfswctrl.exe I close and the system then hangs and requires a medical examination. Is there, by chance, a Microsoft utility that cleans up the registry for applications that have been uninstalled, but be persistent pieces that shouldn't be there?

  Thanks again for your advice.

• Windows XP SP3 Professional Edition problems with the Live Essentials tried almost EVERYTHING please help...

  I am running Windows XP Professional Edition and have tried almost way possible from almost all of the codes, so that it can install. He always tells me a different code almost as something it must not 'dismantling' MSE. I am not certified has + by all means! But I do not know when you searched for sites Microsoft etc., you are looking for better & learn yourself. But I'm at the point where I say "I wanted I had saved the old Version of the WLE who worked great." Just to give you a clue, which hopefully will help me can govern this list I've done on:

  1. search and read questions from other people who were identical and followed step by step, when I received him seemed to be more common error Code. He said to download update Windows Cleanup Utility and remove everything said Microsoft Live in there. I did this and it just via a different error Code

  2 I tried to download directly the WLE "integer" and install it

  3 I am the admin. and always "Ran under" admin

  4 I watched the system requirements & everything I had was compatible, even if I n "t SQL, but went and downloaded and installed, it

  5 I ran in safe mode, and keep in mind that I do every time a cleaning in the place where there is no trace of even the new WLE Installer, b/c I read learned that you cannot leave this trace.

  6 and to be honest, I do all this work b/c I think WLE possesses one of the in my opinion, best photo library it y a. quick, simple, but still has all of the improvements that I use direct mail and really liked the MS Outlook 07 connector is what I have right now.

  7 I've never seen a free software that is so sensitive that it need to go through all these steps

  -Thoughts on any other reasons to help, I would take even the older edition if I could find it, but as soon as I eliminated and did a cleanup & reinstall my hard drive, it hit me. I forgot to record the show and then, think it is free I'll get it online but it has been updated and I need help which is much smarter than me, I will not STOP until I know what and why. BTW, it is not a problem with a firewall or anything b/c I disabled Norton and am MSE tent which was / is child's play, it's not dirty space, but it does the job and it's great and that's why I want the photo gallery for the least and Sync Mail to Outlook.  As I have said that I have nothing else, I know to do, I even tried on another computer running the exact same OPS than mine. And it's the same way. ??? Please help me to get someone...

  Thank you very much in advance for any help other than that described previously, or if someone from Microsoft could remotely help me if it is possible.

  -CM-

  Hmm. check that you can start the Windows Installer service and it is enabled.

  1. Click Start > run...
  2. Type cmd /K net start MSIServer
  3. Press enter and monitor messages in the window of the console open.

  If the service is started successfully, then download the offline version of the WLE from here and try to install it. Select all items to install because they are dependent on each other.
  Download the new log file, if it fails to install again.

• Internet connection with Windows XP, SP3 and Airport Extreme - the status is always "absorbing network address.

  My Airport Extreme connected my IMac immediately, but I am not able to connect on the side PC. Airport utility does not 'no matter what Airport wireless devices". When you check the status of the internet connection with PC tools, the correct network is indicated and shows an excellent signal strength. The status is: "absorbing the network address. However, nothing happens.

  Under 'Repair the wireless network connection', it shows, "Windows is taking the following steps: your IP address renewal" even once, nothing happens.

  Under hardware I show Atheros Wireless Network Adapter and the mention: "this device works correctly.

  Yet, no network connection. Any help will be greatly appreciated.

  Hello

  Keep the changes and open the wireless. For example, to disable security in the router (turn on when to managed to connect).

  You can also try the wireless in a friends house, or an Internet café to get a frame of reference for this behavior elsewhere.

  -------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled).

  If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I change the window of my laptop HP 635 to Windows 7 ultimate and can not find drivers drivers

  I change the window of my laptop HP 635 for window 7 ultimate and impossible to find some drivers. The drivers are listed below with their hardware ID

  Ethernet Controller
  PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  Network controller
  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
  PCI\VEN_168C & DEV_002B & CC_028000
  PCI\VEN_168C & DEV_002B & CC_0280
  PCI device
  PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  Hello:

  You will need:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&mode=2&taskId=135&swItem=ob-93650-1

  This:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&taskId=135&swItem=ob-108903-1&mode=3

  And this:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&mode=2&taskId=135&swItem=ob-93202-1

  Paul

• Can I disable the move tabs in a new window by drag-and - drop the?

  Firefox tends to want to move tabs in a new window when I click on them, while my mouse moves, even slightly. Is it possible to increase the threshold of moving (change of distance, the tab should be before his conversion to a new window) or turn it off completely?

  Although the following add-on is called «bug489729...» ", it will not be changed. Personally, I think this is a great feature and I use it occasionally. There is no way to "adjust".

  • Install this: https://addons.mozilla.org/en-US/firefox/addon/bug489729-disable-detach-and-t/

  You have old versions of Java Console in Add-ons > Extensions of Java did not 'clean' by updating. You can easily and safely remove them. See the instructions:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions
  • Your old versions:
    • Java Console 6.0.24 {CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
    • Java Console 6.0.25 {CAFEEFAC-0016-0000-0025-ABCDEFFEDCBA}

• Pavilion g6: my laptop stuck after its original windows is installed and updated drivers

  Hello team HP;

  I recently get the support of the HP team and installed my original windows 7 Home premium using my product key. Then installed the updates wireless, Internet and network at home, but in a short time, my stuck laptop and keyboard no could not work at all except the power button. Then I installed my original windows 7 Home premium and it is, I can access although I could not installed other programs and my personal ducoment.

  My computer laptop detials:

  Note the model: HP Pavilion Notebook PC g6

  Model: g6-1320so

  So please help my problems, I don't know what to do?

  Thank you

  Hi @EID

  Thank you for your query.

  I understand that you did recently resumed, reinstall your original Windows 7 with the help of HP.  You were then installation updated drivers when the laptop froze and the only thing you could do was power, it works. You then reinstalled Windows 7 again, but can not install other programs or your personal documents.

  Have you tested for hardware failures? Screening of hardware failures (Windows 7, Vista )

  Have you checked against viruses and malware?  Malicious software removal tool

  Like you just HP support help with your original Windows 7 installation and the problem appeared after that, I suggest you contact HP support for assistance, especially since you have reinstalled again and are always problems.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• KB2286198 arouses computers to run slowly. Windows XP SP3 and Windows 7 64-bit.

  After installing Windows Update KB2286198 on my Windows XP SP3 computer, the computer crashes frequently when loading items upward, suchs as pages on IE8 or send or receive emails in Outlook. Computer performance is degraded to the point that it's almost unusable at times. One of my users just improved CAD system 64-bit of Windows 7 today and is having the exact same issues. We run CA anti-virus. Most of the questions I've seen posted include antivirus NOD, not the certification authority. Everyone sees these questions? Someone has an idea how solve it?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• brand new windows 7 Home premium backup problem

  Hello

  I bought the new HP pavilion DM3 [external dvd player] with the new windows 7 Home premium intalled about 4 weeks ago. After the first round and all updates installed, real I tried windows backup on dvd - r media.

  I started windows backup, after whereas it wonder average wiriteable so I put the dvd - r inside, next step was to format dvd - r [little unusual, but I have no choice]... After succesfull formatting it starts to burn. After a few hours, he was still burning mode 54% without errors and progress too. I pull out the cable of the external dvd burner, the writing process has failed and on dvd was written about 1 cm of layer thickness.

  I tried 2 times again with the same result, but the different progress of burning 56% and 25%

  What should I do?

  Best regards...

  Hello D.A.E.Z.,

  Please check the site for problems with CD/DVD problems.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  There is an automatic FIXIT who might help with your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can I download Windows XP SP3 and install on another computer?

  Original title: windows xp sp3

  I have xp sp2 have need upgrade to sp3. Download sp3 to disc and install on another computer? If yes how?

  Hello

  In addition to the advice given by Jose Antonio Ponton Posada CEO, you can also have a look at the response of Shenan Stanley on 20 October 2012 in this thread.

  As Tommy mentioned, you can download and it save on the same computer. You can also download the Service Pack on a different computer and transfer to install it on the requested computer.

  Do not respond if you have any other questions. Thank you.

• Have no sound after reformat Windows XP SP3 and updates

  I had to reformat my windows XP, SP3. Everything was fine, then to halfway through microsoft dates I lost sound.  It shows no drivers for sound, or I have a sound card, which is on the mother boaed. My sound and drivers is where?

  This a problem known but undocumented. Re-install the drivers from your sound card.

  See you soon,.

  Jerry

• When I update for window xp sp3 and I lost my Korean language pack

  When I switch to the window xp sp3 I lost the East Asian language pack as Korean and my computer can't read the xp cd to install. How can I get the East Asian language pack?

  Hello Kleesfo,

  You can try the steps in the below link which will give you information on the installation of the language of East Asia on your computer files:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_install_languages.mspx?mfr=true

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop that a gateway MX7120 Windows XP Professional and it just started late which can do?

  My windows media player and itunes are both late.

  Hi eddie,.

  You did it all change hardware or software on your machine before this problem?

  You can run the disk cleanup tool and check if the problem persists.

  Description of the tool in Windows XP disk cleanup

  Reference: Optimize your computer's performance 

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.