Laptop HP 15-f010wm: 15-f010wm

Similar Questions

• Computer HP laptop 15-f010wm: BIOS password laptop laptop 15-f010wm

  My laptop HP (15-f010wm) got locked with a password of bios administrator required to perform priming. Since I do not know the password I need an unlock code to enter. The message "System disabled" has code 59041206.  Thanks for any help

  @Reg_Tigmaster

  Enter 46929828

  Kind regards

  DP - K

• computer laptop 15-f010wm: Wifi works do not since fan has been replaced and loaded Windows 10

  I download windows 10 on this laptop, and suddenly the wifi disappeared. After that I got a fan error code and I replaced the fan. Now I don't have ethernet. Is there something I have for the material when the laptop back together OR has windows deleted 10 and must be released. I've only ethernet, no wifi adapter listed in Device Manager.

  Can anyone help?

  Hi @vic4455,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the WiFi connection. I'll be happy to help you.

  I would check the connection inside the computer.

  Here is a link to download the latest drivers for Realtek RTL8723BE/RTL8188EE 802.11b/g/n Wireless LAN Drivers.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP Touchsmart 15: BIOS password laptop laptop 15-f010wm

  One of my employees locked themselves on their laptop by setting a power on password in BIOS, that was forgotten afterwards.

  The "System off" code is 53837198.

  Help, please!

  Thank you!

  Hello

  Use the code to reset below

  42795118

• Laptop 15 - f010wm: computer won't turn does not on

  Laptop turns on but, to the black backlit screen. I press f2 at high startup and run the system check. This is the result I get. Failure ID 935754 - 7B77J9 - MFPV7F - 60UV03. Product ID J8A22UA #ABA. Hard drive 1. The laptop is only 3 months old. Never used until the day of Christmas 2014. I'd hate to think that it is a defective hard drive only an old HP product of 3 months.

  Hello
  
  This means that the hard drive is failing / failed. Try to save your data by this outgoing and connection to another PC with SATA USB adapter.
  
  HP would replace free of charge if you are under warranty.
  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&LC=en
  
  If you did not already create USB recovery, you must order from HP.
  http://support.HP.com/us-en/document/bph07143
  
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html
  
  Concerning
  
  Visruth

• HP 15-f010wm Notebook PC: laptop screen not turn on please help

  My screen won't turn on I need help I've tried everything

  Hey @Kacy1,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand you are having some problems with your laptop display. I'd be happy to help you.

  The laptop turns on with a black screen? If so this is a good document for that: HP Notebook PC - computer starts up but screen remains blank (Windows, 10, 8)

  If the computer does not start at all, you'll want this document: HP Notebook PC - computer won't start (Windows 8)

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• HP 15 15-f010wm notebook: HP 15 laptop BIOS pass reset?

  Have HP-15f010wn with bios forgotten past to: 70052673 after 3 failed attempts. Hard drive went bad and can not select start.  I removed the battery ram and room. ? Any response is thanked!

  AB

  @abgunman007

  Enter 65930275

  Kind regards

  DP - K

• HP laptop computer 15: 15-f010wm computer HP laptop touch pad

  How can I turn off my touch mouse pad until I got back on.   I use the function disable in the settings menu.  But, I always comes back on after a few hours, or after I have turn it back on.  If I uninstall it.  Can I reinstall it later on the net?

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Disable the Synaptics device in the usual way, then check if the setting is now preserved.

  Kind regards

  DP - K

• HP 15-f010wm Notebook PC: touch screen does not work

  I have a HP 15-f010wm Notebook PC (ENERGY STAR), and it is supposed to be a touch screen. I used it for about 4 months and the touchscreen operated accordingly. It ended yesterday when I turned on my laptop, the touch screen works not at all. I followed all the troubleshooting steps to restore my touch screen without result. Also, in the PC Info screen, Pen and Touch information shows that "no pen or touch input is available for this view. What can I do to recover my touchscreen?

  * All software and drivers are up-to-date

  * Anti-virus has been on and does a full system scan

  * Does not fall or struck before hand

  * Is not subject to the immense heat/cold

  * Generally a study school laptop table

  Hi _jaspernavarro,

  The next step would be to seek to do a full System Recovery to restore the laptop to the factory settings. Back up your data on a USB flash drive or an external hard drive. If the touch screen still doesn't after that then, give us a call. You can reach HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

• 15 - f010WM: III 15-f010WM SATA controller?

  The Touchsmart laptop 15-f010WM there a SATA III (6 Gb/s) controller?  Thank you.

  Thanks for that reference.  I had seen it, but it was misinterpreted as referring to the 500 GB and 750Go discs themselves not the laptop SATA controller.   So, it's a SATA II controller.  I understand that SATA III SSD are retro-compatible... when it is linked via a SATA II controller, however, you see much better performance on a traditional 7200 RPM drive?  I assume the benefits of no moving parts and little if any impact fragmentation - largely irrelevant with a SSD - could make valid upgrade anyway.  Thanks for the final clarification!

• Drivers for 15-f010wm

  Hi guys -.

  Where are the drivers for the 15-f010wm?

  They seem not to be displayed.

  Just got this laptop home of Wal-Mart, loaded a new copy of Windows 8.1 on it and concluded that the page 'pilot' is devoid of pilots, a link with recovery media order.

  See the link below for what I could find...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=7280583

  Hello

  Install:

  Realtek RTL8188EE wireless LAN 802.11b/g/n

  Intel chipset

  http://ftp.HP.com/pub/SoftPaq/sp65001-65500/sp65250.exe

  Management engine interface (MEI)

  http://ftp.HP.com/pub/SoftPaq/sp65001-65500/sp65359.exe

  Video Intel HD

  http://ftp.HP.com/pub/SoftPaq/sp65001-65500/sp65471.exe

  (LAN) Realtek

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65599.exe

  Audio Realtek (HD)

  http://ftp.HP.com/pub/SoftPaq/sp65001-65500/sp65423.exe

  Card reader

  http://ftp.HP.com/pub/SoftPaq/sp65001-65500/sp65476.exe

• What is the maximum memory for 15-f010wm

  Just bought a 15-f010wm of Wal-Mart.  It comes standard with only one simm 4 GB card.   In one place that the manual says that SIMM is not user replaceable, then in another part has a diagram and instructions to replace.  A forum of Wal-Mart announcement said that memory 'should' be expandable to 8 GB.  It is not an answer.

  The question: If memory can be improved to a single 8 GB Simm?

  Thank you

  I called HP and after being somewhat persistent told me that this machine can be upgraded to a single card of 8 GB.  Based on all the information, I have read and received I'm 99.9999% sure that's true.

• 15 - f010wm: processor upgrade

  I'm trying to find out if the processor Celeron N2830 in my HP 15 - F010wm is expandable to a faster processor.

  @seppi528

  Yes, it can be improved, but you need to replace the motherboard.

  Your Service Guide here.

  http://support.HP.com/us-en/product/HP-15-notebook-PC-series/7137590/model/7280689/manuals

  REO

• HP-f010wm: update the Synatics Touchpad V7.5 recording settings do not after Windows 10.

  After I've updated for Windows 10, it seems that the dirvers all have been updated as well. Now the settings won't save whenever I closed my laptop. Can someone help me with this please?

  OK, the 1 million my laptop rebooted, I finally worked out how to solve this problem!

  1. Ensure that your Automatic Updates settings are so that the subsequent steps are not completed in vain
  2. Go to the Device Manager (use Cortana search box to find it, if you wish)
  3. Select 'mouse and other pointing devices '.
  4. Open the dialog of Synaptics Touchpad SMBus
  5. Click on set to update driver
  6. Click Browse my computer for driver software
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Select and install SMBus of Synaptics Touchpad 18.1.48.59 version [26/03/2015]
  9. remember those pesky automatic updates
  10. Restart the computer
  11. Set the options of Synaptics, computerized test test, again

  I hope this works for you guys!

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  

• HP 15 laptop: touch screen has stopped working

  I have a HP TouchSmart laptop computer model 15-f010wm, product number J8A22UA #ABA, 8.1 with Bing 64-bit Windows.

  The first day of the 3-4, I used this computer it worked like a charm. I loved. Now a few times touchscreen will work for about 5 min and then stops or does not work. When it stops working, I get a pop up in the lower right corner that says: the last USB device not recognized USB device you connected to this computer has malfunctioned, and the window does not recognize. (I have not plugged anything in this computer but except the power cord)  When this happens and you go to Device Manager sometimes, there will be a yellow! triangle under the Human Interface Devices drop down and some times yellow! triangle will be under Universal Serial Bus controllers list down. And if you go to they system screen line Pen and touch passes to no. Pen or press enter is available for this view.

  I tried to do a system restore. Also, I did a test fast system and a comprehensive system. The results have been the primary battery check ok and all the others said past. And of course I can't make the screen test because the touch screen does not work.

  Please help me with this. My computer was a gift, my other is really old and was ready for an upgrade. I've never had problem with HP before.

  Hi @Jen81 ,

  Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.