Laptop HP 630: error starting

Similar Questions

• Clean install windows 7 on my laptop EasyNote LM85 error "starting windows."

  Original title: installation of windows 7.

  I try to clean install windows 7 on my laptop than easynote LM85 DVD or USB, but it won't go beyond the screen when he say "s windows startup".

  After that appears a few seconds later, my computer restarts automatically and start again, I cannot access the menu facility

  help please I have had this problem for weeks the only OS it install me is winxp pro

  Hi Aurélien,.

  Thanks for the reply.

  Did you run the assistance of upgrade of Windows 8 on your computer?

  Upgrade Wizard: FAQ

  http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ

  Let us know the result of the upgrade wizard.

• faiing password of the BIOS on the laptop HP 630

  Hello

  just suddenly the bios password started faling on this laptop with the error 94004008.

  Is it spent there anyway?

  Thank you

  Hello

  Try the code: 21962028

• HP pavilion laptop computer does not start

  When I turn on my laptop it does not start. It goes to a blue screen that indicates it should be repaired. Help please

  Hello

  Error code 24 characters long drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed.  Quickly fails after it starts with error 0x800b0100 in the system log.  It's a fully verified SP2 full download.  I did a full chkdsk /r who fixed some issues.  Removed AVAST.  A running Fix It tool that fixes the problem with crypt services.  Scanned for malware with MRT.  Scanned for malware with MalWareBytes.  Scanned for rootkit with the McAfee tool.  Run the sfc/scannow, that signals mistakes.  The CBS. Partial contents of the LOG file (see KB972036):

  2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
  2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
  2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
  2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized.  Reboot required: no
  2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
  2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
  2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized.  Reboot required: no
  2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
  2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.

  KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store

  System will not install KB972036 - States does not apply.

  Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit.  In addition, it specifies SP2 - which obviously I do not have.  But I manually downloaded the apparently correct tool and ran it - get does not apply.

  Hi John,.

  Apologize for the delay in response. Please try the steps as described in the following article:

  Windows Update error 800b0100

  Back to us for assistance.

• No cos found NIC error starting pxe for ESX 4.0

  Hello

  I am facing the following problem when trying to boot PXE Vmware Vsphere (ESX 4.0). I'm stuck at the error message which said 'no cos NICS found' Please find attached to this screenshot.

  I would like to briefly on what I'm trying to do here:

  I try to perform a boot PXE Vmware Vsphere on Vmware Workstation and have managed to a point, until I get this weird error mentioned above.

  (1) used Vmware Workstation version is 6.5.0

  (2) confg H/W:

  Lenovo T61 laptop computer with processor intel core duo x 86 and virtualization enabled in BIOS

  delivered with 2 physical network cards & wireless and 2 GB of RAM.

  (3) PXE server is running on RHEL5 32 bit platform. I have a DHCP, Kickstart and PXE server to run out of this box. DHCP works perfectly well without any problem but when it is a step for the identification of the host name.

  IP and so forth he said cos NICs not found and I see my dhcp server attempts to assign dynamic IP and it also displays no signal thank you.

  I have PXE starts ESX 3.5 with no problems and it worked like a charm. This is the first time, I ran into problems of this kind. I manually installed ESX 4.0 but it seems no more using the anaconda Installer and

  the installation of the Poles kickstart file created is very discreet and does not contain sufficient information to customize the script is below.

  Please find the entry that I have under the pxelinux.cfg directory on my PXE server:

  label esx4.0

  kernel esx4.0 - vmlinuz

  append initrd = esx4.0 - initrd.img mem = 512 M quiet ks = FTP:///pub/kickstart/ESX4.0.cfg ksdevice = vmnic0

  I'm also willing to share my script to start with you. Please find attached the script below. Kindly let me know how to proceed further. I would be really grateful if you could suggest if any changes to do to my

  startup script.

  See you soon,.

  Kunal

  Post edited by: kkalyanp80

  Post edited by: kkalyanp80

  Double post, please refer to this topic: No cos found NIC error starting pxe for ESX 4.0

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Notebook15-r110na Energy Saver: my laptop screen has suddenly started to go black when I need to plug the power adapter

  Laptop screen has just started to go black when I need to plug the power adapter to recharge, if I get screen back to normal.  I have not downloaded anything new recently.  I have download the free 10 Windows but that was months ago.  Any help would be appreciated, but please not too technical as I'm not an expert on computers.

  Maybe the powerplan battery is changed or not properly configured. You can see the current powerplan thanks the battery status bar icon.
  Please check if the powerplan options are correct.
  More specific:
  Brightness updates when it is plugged into the charger OK?
  
  Also: If the screen goes black, can still use you the shortcut keyboard keys to adjust the brightness?

• Error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the Setup from LabVIEW FPGA.

  Please help me for this problem "error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the setup of LabVIEW FPGA.»

  Look for the error on the Web site of or or on the forums. Take a look at the following links:

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=381394&requireLogin=false

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=205754&requireLogin=false

• Laptop HP 630, generic peripheral MIDI usb not recognized

  I have a problem with a laptop HP 630 of all nine (clearance stock) (LV425PA #ABG): this is not to recognize a generic USB MIDI device (keyboard). When the unit is plugged in, I get a message "USB device not recognized". He calls an "unknown device" Manager of devices and says "Windows has stopped this device because it has reported problems. (Code 43) ». The computer has been reset with a minimal installation of Windows 7 Home Premium 64-bit for the recovery partition, with all the HP and Microsoft updates applied, but still refuses to recognize the device.

  I also have a new (stock clearance) desktop HP 4000 P. This computer immediately recognizes the keyboard when it is connected and properly installed the drivers for it. Even before installing updates - it works straight out of the box. We can exclude the device MIDI as the cause of the problem. Apart from the obvious differences of chipset, the only other difference is that the 4000 P running the 32-bit edition of Windows 7 Home Premium.

  I would appreciate help with this question, because the reason I bought the 630 HP was in first place for the use of MIDI, and it will have been a waste of time and effort if it can not be implemented in this role.

  After much effort, I have determined that it is a subtle hardware problem. The MIDI keyboard USB works fine on two other computers, but not the 630 HP. Similarly, several other USB MIDI devices have worked without difficulty on the 630 HP. Only the specific combination of HP 630 and the particular MIDI keyboard fails. It turns out, however, that they work if connected with a USB cable that is shorter than the one supplied with the keyboard. It is only the combination of three-way MIDI keyboard, cable USB and HP 630 that fails. Change any part and everything works.

  Obviously, this sensitivity to the length of the cable means that something is a little marginal on the hardware, but the fault seems to be shared between the two HP 630 and the MIDI keyboard, since they both work when paired with anything else on the same cable. I'll have to wait and see if there are other problems in the normal conditions of use.

• I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?

  I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?

  original title: to upgrade

  Hello

  Read this information before you buy Windows 7:

  "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/download/en/details.aspx?ID=20

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  And here is the site of Dell to see if Dell has Windows 7 drivers available for your model

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  See you soon.

• drivers for windows 7 for laptop HP 630

  Hello

  All the drivers for your computer laptop HP 630 are found hereavailable.

• My computer guard turn off at startup; error starting Windows. Could someone help me please?

  Hello

  I have an Emachine, which is about three years old. We take good care of it, look at what we download and perform analyses of virus frequently a week. But for the last two or three weeks every time we start our computer, it takes a few times before he can actually get into Windows because it maintains power off. When he died, and we turn it back on, the computer goes to the screen if you want to put it in safe mode or start Windows normally, because there was an error starting. The computer offers the possibility to try and correct the error, but sometimes it is remedial and it still happens or it goes into repair mode and powers off the coast.

  We downloaded and installed the System Mechanic (the latest version), hoping that it could detect errors in the disk hard because we heard good things about the program. Unforunately after installation and with us the program running, he finds errors in all of the computer, but after you power on your computer and leave it alone for a few hours and turn on again, the problem comes back right to the top. From a logical point of view, we think it could be either an error on the HDD causing constantly turning the computer off, there might be a virus in the Startup Repair which is not find and fix the problem or there might be something wrong with the power supply by to short circuit and power off.

  Nine times out of ten once the computer is turned on, you can even say that there is a problem to be with, because everything works well. We have some important information about the computer is harmful that we can find and fix the problem.

  Thanks a lot for your time!

  Cory

  Hello

  ·          When the issue started?

  Step 1: Disconnect any external devices and try to start the computer.

  Step 2: Check if the computer starts in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See also: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Download Itunes on my laptop just before, it starts to install, I get a message saying that windows Explorer stops because the prevention of execution of data has stopped installation

  original title: Itunes and DEP

  While downloading Itunes on my laptop right before you start to install, I get a message saying that windows Explorer stops because the prevention of execution of data has stopped installation.  Is there any solution for this?  I'd like to install itunes on my laptop.

  Hi Steve681229,

  Thank you for using the Microsoft Answers forum.  Here's what worked for someone else.  Thanks Kevin

  Hi thrivenformore,

  Please use the forum for Support of Vista,

  You could try to add iTunes to the DEP exception list.  However, this behavior is not normal.  Go to the support forum of Apple for iTunes for Windows, search on DEP.  There should be a thread "How can I turn off DEP for iTunes?" or it Prevet planting iTunes? "which provide troubleshooting steps you might want to try before adding it to the list of exceptions."

  How to add the program to the DEP exception list:

  1. Press Start, right click on computer and select Properties.
  2. in the window that appears, click Advanced (on the left panel) system settings.
  3. in the first box that says Performance, click on the settings button.
  4. in the window that opens, click the Data Execution Prevention tab at the top.
  5. There should be a box of exceptions in the middle of this window. Click the Add button and navigate to the C: drive, then Program Files, then the iTunes folder, and then choose the iTunes exe.
  6. Add the exception, and then click OK in the window of the DEP.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error starting 3

  original title: error starting

  My computer just started this doing. any ideas on how to solve this problem?  with 3 error loading key

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Error starting "appName": Module "appName" is trying to access a secure API

  Dear all,

  I downloaded a few applications in the app world. When I try to install on the device, there is an error "error starting Sunfish6: Module 'Sunfish6' trying to access a secure API. I tried to update the files, he needs, but still get the same error message. What is the cause of the appearance of the error message? I developed this application using phonegap and blackberry webwork framework.

  Thanks & best regards.

  In the eclipse webworks menu, select project-> BlackBerry-> sign with Signature tool.

  Then upload the generated files.