Laptop HP G42: reset

Similar Questions

• HP G42: Laptop HP G42 - administrator or power on password (key: 50528785)

  I have a laptop HP G42 I forgot the password for power on. Is it possible to retrieve or remove the password?

  After 3 attempts with the incorrect password, it says disabled System - Key: 50528785

  Thank you!

  @cyvcels2015

  Simply enter 45480301

  REO

• I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell desktop inspiron one 19

  I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell inspiron one 19 desktop... your help will be very appreciated thanks in advance!

  Here are the usual methods to solve this problem:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
  • Insert your flash drive USB with the password key file (only works if you have created such a keyfile).
  • Check your paper files (works only if you threw down the password somewhere)

  If none of these standard precautions work for you, then the remedy will be painful. Post again if this is the case.

• Laptop HP G42-303DX system restore error 0x800700B7

  I have a laptop HP, model G42-303DX, running Windows 7.

  When Windows tries to start, it displays the message: Windows Error Recovery / cannot start Windows.

  Then StartUpRepair launches and research about a minute for the problems.  Then it displays the message "Startup Repair cannot fix automatically.  I gave options: (1) sending info (can not since I can't it connect to the Internet) or (2) not to send (should I select).

  I click on Details of the issue and see the following:

  ProblemEvent name: StartUpRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:21200545 problem

  Signature of the problem 05: AutoFailover

  Signature of the problem 06:29

  Signature of the problem 07: corrupt the file

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  The next screen to appear is: HP Recovery Manager

  I tried to do five different restorations, starting with the most recent restore point and working up.  All restore attempts failed.  In 3 of 5 attempts, I got the error code: 0x800700b7.  And in 2 of 5 attempts was the failure code: 0x8000ffff.

  I created a bootable (Kaspersky Rescue v10) DVD rescue disk and run a deep scan of 4 hours to check the virus, Trojans, etc, and it found nothing.

  When this laptop was purchased from Best Buys, we have not all discs.  I'm sorry to say that we did not create recovery disc.  I checked on the HP support site to order a set of recovery discs and can be found only for Windows 7 in the 64-bit version.  I don't know if this PC has been configured as a 32-bit or 64-bit machine.

  In addition, I use the Recovery Manager to create DVDs from backup files on that PC.  This problem started in December, and according to my daughter-in-law (the only user of that PC), it gave him no problems until this.

  I would REALLY appreciate any help on this... I'm a little at my wits end.

  Thank you

  Hello

  If you press F11 at startup, then it will take you to HP Recovery... .but recovery will reset the computer to factory

  Settings... Make sure you only have all backed up... If F11 did not help, then here is the link to order recovery disks for your

  System...

  DVD - Windows 7 64B + Supp 2 Recovery Kit ► Your system has Windows 7 Home Premium 64-bit installed on purchase... you can check the specifications of your system here... HP G42 - 303DX Notebook PC product specifications

• Laptop HP G42: power on password

  Hi, I have a laptop HP (HP G42) and is having a problem, that is to say "Power on Password" which can be completely locked out of the computer.

  After trying to enter the password for 3 times and I got an error code.

  My error code is [68157705].

  Y at - there someone out there who knows how I can remove/get rid of it?
  
  Kind regards
  Kassim.

  Try to enter

  77835321

  Be sure to enter the BIOS and remove the password. This way, you will avoid having the same thing happen.

• Sony vaio VPCEA45FG laptop can factory reset without cd?

  How I picked my laptop without cd? my laptop has been shortened appealed the virus that make me in trouble, so I need to factory reset my computer...

  CBX_deltax,

  If the recovery partition is still intact you can recovery that the unit back to the factory with the F10or the Assist button.

• How to install windows XP in dual boot os in my laptop HP G42-351TX preloaded with Win 7

  My laptop has the configuration as follows:

  Intel corei3 processor

  2 GB OF DDR3 RAM,

  320 GB SATA HARD DRIVE,

  ATI Mobility Radeon HD5430

  When I tried to install XP in reducing the volume and create the new disk, collapsed with BSD saying material changed, check the drive for errors and viruses with error code (I forgot) etc after installing some drivers. It will stop only when "starting windows" like status bar message. I need to install XP only incase if we cannot install the dual boot OS. Pls tell me the step by step procedure to do this.

  Sorry, but your new HP G42-351TX is not supported by the old operating system to Windows XP.  If you want to install Windows XP, yopu need via Windows XP Mode.

  Install and use Windows XP Mode in Windows 7

  Windows Anytime Upgrade: Windows 7 Home Premium to professional

  Carey Frisch

• Support troubleshooting problem to display PC laptop HP G42-415DX

  Hello, I have a HP G42 - 415DX Notebook PC with Windows 7 64 bit.

  I have no display of the image on the screen and need help to understand where the problem lies.

  I updated the Bios and installed all corresponding updates.

  I reinstalled the graphics driver on the HP drivers section.

  I showed a flashlight on the screen to see if it was just the light back, but there is still no image, the scrfeen looks like it's turned off.

  I have the VGA output is plugged in and it works fine. I hit F4 and is currently on the computer only, even if the image of the screen is just all the external screen.

  Is there a troubleshooting method to see if it's something on the motherboard as the graphics card or the monitor itself without buying it? Or am I just a bit stuck guessing and hoping that it works?

  Appreciate any help

  Thank you

  M

  Welcome to the HP, MG forum.

  Our own Distinguished Professor HaggisCat addressed this type of issue and explains what could happen in the Post below.  This can help with the diagnosis on your own system.

  Display on the laptop monitor displays briefly, then disappears at startup

  Excerpt of the Post, HaggisCat comments:

  The external screen works with Windows, which means that the video card and motherboard are very good. The laptop screen has disappeared, the backlight (s), the controller or the cable is defective. A part or the combination can cause a black screen.

   

  Because you can't see anything with the light from the flash on the screen, the cable has failed or the screen itself needs to be replaced.

   

  If you put a new screen and it still does not work then replace the inverter and if you still get nothing, the cable is the last thing that this will cause.

   

  Sorry, sometimes the only way to diagnose a problem's substitution, but before you go out and buy new parts, I always suggest that you take it to a reliable repair shop to get a second opinion.

  ====================================================================================

  You've done a lot, if not everything, what can be done on the software side.

  More information about display problems:

  Common issues with the screens

  =====================================================================================

  Good luck!  I hope this helps.

• I forgot the password of windows 7 (Dell laptop), how can reset password windows 7 without a disc?

  Hello, I need help! I forgot my windows 7 login password, Dell laptop! I have tried to capture all the password I remember, but was unable to, also, I can't find my reset disk, how can I reset or recover my forgotten password of windows?  or unlock it?

  This happens often. If you had a windows reset disk, then it is very easy to reset the admin password. If not, then you should make your own and which allows to reset the password. Take a look at this tutorial, it seems fairly easy to reset the password with a usb reset disk:

  http://www.iseepassword.com/how-to-reset-Windows-7-password.html

  Edit: just did a test on my machine to win 10, works as expected.

• Laptop factory settings reset fails with an error "0 xC0000001 file:\windows\system32\winload.efi missing.

  Original title: computer Reset laptop to factory settings

  I am getting error 0 xC0000001 missing file:\windows\system32\winload.efi and I have not a disk how can I fix this help please me

  http://www.Google.com.au/search?q=Winload.EFI+missing+0XC0000001&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & gws_rd = cr & ei = 05gJUrq0Lsj6kAWmuYDgDg

  Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

  These options are also integrated to Windows 8.

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• Pavillion g6: want to wipe recovery to sell laptop but after reset facotry there has not yet wipe how can I erase it.

  I can't wipe my recovery on my laptop I want to sell it how.

  Hello

  There is none of your personal files on the recovery partition, because any change in the areas of recovery them immediately denies.

  If you did the fresh install of factory (recovery re - install) the only things that could be there of yours is the username and password if you have created a.  Assuming that you have not connected and use the internet, etc.

  So who has re-insured you?

• HP laptop: HP G42 415DX hangs at post

  The system has been and is still blocking position up-down left, said - ESC for the start menu.

  Battery is dead - AC - did it with and without the battery in the device.

  I put in the new drive hard windows 7 ENT / x 64.  Runs great when it comes to windows.  When you restart - same thing - hangs on post.

  I checked the order - hard drive to boot first.  I flashed the bios for more later.  I ran the diagnostic boot test that all previous phases.  I also reset the bios to load the default values.  Nothing seems to work it to make a stop/restart and get past the post.

  After you click ESC to continue - it will start right from windows.  In the diagnostic selection menu.

  Really baffled here.  All solutions?  It is NOT a WINDOWS PROBLEM.  It is not a problem of MEMORY or HARD DISK.

  Thanks for any help.

  Well - I'll answer my problem for me.  I figured out it's a faulty power brick / cord.  Needs no summer of drawing enough juice for the initial post after turning on the power button.  After trying 2 different hard disks, flashing the bios, running the edge of diagnosis - I said what the hell - replace power cord, since I have one here in my office.

  Instant results.

  BAM.

  Thanks Joe!

• G42: Reset Bios Setup

  Estou com problemas para don't reset any configuration SYSTEM appears DISABLE (5921204)

  @k0ring4

  Enter: 46170087

  Kind regards

  DP - K

• HP2000 - 240 c: 2000 HP laptop Bios password reset

  Hello

  Unfortunately I misplaced the pwd for the bios, is it possible to reset:

  77335555 is the message of the system disabled

  Try him.

  68093591

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If requested the CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• laptop HP 2000: resetting the bios password

  I have a laptop of HP 2000 with system disabled code 94275984 you can help me?

  @willdnnyb

  Enter 21153300

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.