Laptop factory settings reset fails with an error "0 xC0000001 file:\windows\system32\winload.efi missing.

Similar Questions

• The required file is missing or contains errors. file: \Windows\system32\winload.efi.

  So, today, for Christmas, I got a laptop Asus R503U series. I played a little bit about it for a while (all in the same day) and towards the end, a pop window up told me that windows live was insensitive and I had the possibility to close or wait until after I hit wait three or four times I finnaly hurry then close my phone froze so I restarted and when it shows is I was instantly to a screen that says : Recovery of that your PC needs to be repaired. The application or the operating system could not be located because a required file is missing or contains errors. file: \Windows\system32\winload.efi. you will need to use tolls to recovery on your installation media. If you do not have any installation media to contact your system administrator or the computer manufacturer. I bought this laptop from a Pawn shop with just the phone and any other case it came pre installed with windows 8, it's even a sticker on the bottom. I really need help! The cheapest way to please and thanks a lot!

  Thank you so much you pretty much confirmed what I thought it was true. I have a windows desktop computer which is able to create a recovery Flash disk, but the size is 16 GB, disappointment, enough with what you just explained?

• HP Pavilion 13 X 360 PC: File:\Windows\system32\winload.efi 0xc0000225 error Code

  Product number: K1K07EA #ABU

  Serial number: [personal information]

  How can I get a picture of discovery on a USB port when I can't access my laptop to get the picture?

  Download Recovery Manager on an old laptop?

  All tests do not sure what happened, I would like to know if any other information is needed.

  Thanks in advance,

  Rob

  Hello

  You are welcome.

  This happens because your machine comes with 8.1, so will have no specific driver for 8

  When you are on the page displays "no software or drivers are available for this product with the selected operating system." Please make a different selection ", you see an option of editing right - if you do, click this button and select Windows 8.1 because the OS - most of the drivers should work for 8"  As long as you install the LAN or WLAN driver, just go through the updates to Win 8 until the 8.1 update is available, apply it and then install the rest drivers.

  Kind regards

  DP - K

• file:\Windows\system32\winload error code. EFI: 0 xC0000001

  Original title:

  I continue to have problems you are trying to reset my computer.

  I continue to veto when I try to reset my computer configuration:

  "Recovery".

  your PC needs to be repaired

  the application or the operating system could not be loaded because a required file is missing or contains errors.

  file:\Windows\system32\winload. BF.

  error code: 0-xC0000001

  you will need to use the tools of recovery on your installation media. "If you don't have any facility (such as a disc or USB device) support, contact your system administrator or the manufacturing of PC.

  How can I solve this problem and put my computer back to factory settings?

  Hi Suzette.

  Sorry for the delay in responding.

  You can contact the support of computer manufacturer for additional assistance related to the factory reset.

  Lenovo's community: http://forums.lenovo.com/

  Lenovo Support: http://support.lenovo.com/en_IN/feedback/contactsupport.page?

  Thank you.

• Problem refreshing - state that there was a lack of file i.e. windows/system32/winload.efi with a 0xc 0000001 error code.

  Original title; Refresh problem

  Tried to update and went through the procedure advised. However, the message come indicating the problem with the computer. He went on to clarify that there is a missing file, i.e. windows/system32/winload.efi with a 0xc 0000001 error code. He said I would need to have access to the USB or disc, but I have no then recommends talking manufacturer. However, are there any other ideas to rectify this.

  Hello

  We need more information to help you, please answer the following question.

  What is the brand and model of the computer?

  Error code: 0 xC0000001 indicates that there could be some problems with the boot device or startup files are corrupt. Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions. Choose this path requires you to save all the data first. The OEM must be able to provide a recovery CD to you at time of purchase.

  If you do not have a disk to install/repair of Windows 8/8.1, then I suggest you first create a Windows 8/8.1 installation media. Check out these links:

  Create a recovery USB disk.

  http://Windows.Microsoft.com/en-CA/Windows-8/create-USB-recovery-drive

  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  The Windows upgrade with only a product key.

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  Run the update using the repair disc.

  How to refresh, reset or restore your PC.

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Note: Apps that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  You can also view the following link.

  Windows 8.1 gel and Refresh Failed - error 0 xC0000001 is.

  http://social.technet.Microsoft.com/forums/Windows/en-us/c39cf1e1-fed8-49BD-bc6c-8690836f371f/Windows-81-freezing-and-refresh-failed-winloadefi-error-0xc0000001?Forum=w8itprogeneral

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

  I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

  "Recovery".
  Your PC needs to be repaired
  File: \Windows\system32\winload.exe
  Error code: 0xc000000e
  You will need to use the tools of recovery on your installation media, etc...

  Press Enter to try again

  Press F8 for startup parameters

  Press F9 to use another operating system.

  It allows me to boot from another HD after pressing F9 several times.

  Any advice would be appreciated.

  Kind regards

  Anthony

  I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
   
  Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

  Choose your language. Click next
  You will now see install in the center of your screen. On the lower left side you can see fix your computer.
  Choose repair.

  You will have several options, including:
  Refresh your computer
  Restore your computer
  Advanced options

  Choose Advanced Options.
  Launch the command prompt
  Enter the following commands one at a time who hit enter after each command.
  Bootrec /scanos
  Bootrec /rebuildbcd
  Bootrec /fixmbr
  Bootrec /fixboot
  Restart the computer once the last command finished

• OxcOOOOOOf error - file: \Windows\system32\winload.exe status: OxcOOOOOOf

  I get a message from Windows Boot Manager as follows: could not start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. you insert the Windows installation disc, and then restart your computer. 2. choose your language settings, and then click "next". 3. click on "Repair your computer."  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.  File: \Windows\system32\winload.exe status: OxcOOOOOOf Info: the selected entry could not be loaded because the application is missing or damaged.

  I have the drive, it won't start him.  I got the diagnostic tool memory to run.

  What should I do?

  See the Divine Logix post on this thread if it helps:

  Winload.exe is missing or damaged (no it isn't!)
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c99dc573-6842-4E28-8ec0-a63c61495308/

• Vista, it lacks the file:\windows\system32\winload.exe.status:0xc000000f,D partition was installed at the factory, backup

  I deleted the contents of partition D on my friends family vista premium, now it will not boot from the disk of the plant, he said that the file:\Windows\system32\winLoad.exe is missing with status 0xc000000f were if I can get this file or is there anything I can do to get the content from the back of the drive D : or just that he can start up without this partition D

  Hello

  the D: Recovery partiton was photographed by the manufacturer during production

  Once deleted it

  you are not supposed to ever altering this partiton

  as you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Vista could not start in normal mode and the relocation of scores of hidden factory settings also failed.

  NOTE: THE PROBLEM WAS MY POWER SUPPLY WAS LOW, NEW POWER ADAPT SOLVED MY PROBLEM.   Read more if you are interested in what happened prior to my tent a different power adapter.

  Original title: vista 32 does not start

  After a reboot could enter the mode safe mode with internet connection.  able to restore good boot known beforehand.  But what normal start attempt would not start completely.  tried to reinstall from hidden factory partition.  07:34 minutes, the installation progessed.  then the machine stop.  When you restart get the message "error during installation, restart the computer, and then restart the installation."  When you try to start in safe mode, get error ' cannot install frrom SafeMode ".". "  I have no bootable cd.  to know about a 'platform of recovery' still tells CD also cannot install from this cd.   can I boot from a "devils of recovery" in safe mode and use the hidden partition to reinstall to factory settings as I tried the first time?  or do I need a full installation CD to get the machine to boot?   My question is should I at this stage of start-up during installation seems to have failed?

  as for what caused this problem?  I recently gave a USB external hard drive, but had not written for her.  did a chkdsk of the external hard disk without error.   When the problem was first happening, I removed the battery and the power cord of the acer laptop then pressed the power for 30 seconds to perform all memory the power button.  He got rid of a problem that I had been meet in which received start-up error message not "adapter acer". with battery removed, laptop power problems have disappeared.

  as the system is now, when I try to start everything now alt F10, I get a screen that reads "change windows startup options for: microsoft windows vista ' ' path: \windows\system32\winload.exe" "partition: 2" "HDD;". " d404533e' "[/ noexecute = optin /deteecthal]"

  When I press ESC the next screen "windows boot manager" bed "choose an operating system to stat, or press TAB to select a tool:

  Microsoft windows Vista (single choice)

  "to specify an option fo this choice, press F8."

  "Tools:

  "windows memory diagnostic"

  (diagnosis of memory showed no problem) by pressing TAB toggles between Vista and the diagnosis.

  I tried to boot with external USB hard drive connected and not connected.   the touch pointer was not working, but was erratic.   Sometimes, I could use a USB wireless mouse when it is started in safe mode.   recently the media player would not charge unless I restarted.  (before the system does not at all which is the theme of this original problem).

  When I try to start using f10, I get a screen that seems to ask for entry. the cursor is held after the detecthal of the line as below. What could of entry to enter the boot to continue?

  Winload.exe

  / noexecute = optin /detecthal

  me. surprised... the problem was that my power supply was low.   the adapter provided enough power for the laptop, most of the time.  but sometimes for laptop needs more power that the adapter could supply... so the laptop would be closed.   When I tried a different power adapter in a store, the fully charged laptop and my problem was solved.  lost a lot of time because I didn't know that the power supply was the problem!

• Windows Update KB979482 always fails with 8007065E error code

  KB979482 fails with 8007065E error code. All other updates are successful.

  Running Windows Vista Edition Home Premium SP2.

  Here are a few excerpts from C:\windows\windowsupdate.log:

  ... ~ snip ~

  DnldMgr * updates to download = 1
  Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
  Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
  Agent * bundles 1 updates:
  Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
  ... ~ snip ~

  Automatic update fails...

  ... ~ snip ~

  Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
  Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
  Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
  Manager of FATAL: Source of error is 106.
  FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
  DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
  ... ~ snip ~

  So I tried to download KB979482 here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

  However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

  I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

  P.S. running BitDefender 2012 if it matters...

  To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Installation fails with "internal error 2502.

  I have a client that is running Windows Vista Home Premium (32 bit) and my application setup CVI-built fails with "internal error 2502.

  This installation kit has been deployed successfully on hundreds of computers with different versions of Windows, and I never saw it. No device drivers or advanced libraries - just standard execution. I use CVI 9.0.1.

  Some old problems with the Office installation, date/time settings etc. of research show very little - but I still found nothing which indicates what means this error.

  Ideas or ideas very welcome.

  Thank you

  Ian

  Thank you love. It seems that the problems #2 (permissions) were part of it and possibly other problems linked to the virus. It will re - open this computer from scratch. Detective Conan.

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• KB973687 & KB923561 fail with 0xf00b0004 error

  I have 2 updates that fail with the error 0xf00b0004.  I use a WSUS server to update my clients and updates have been installed successfully in 13 other PCs.  The clients are running XP Professional.  Updates fail and their error messages are below:

  -KB973687: Installation failure: Windows failed to install the following update with error 0xf00b0004: update for Windows XP (KB973687).

  -KB923561: Installation failure: Windows failed to install the following update with error 0xf00b0004: Security Update for Windows XP (KB923561).

  I don't know what means the error 0xf00b0004.  Any advice will be appreciated...

  Hi Findingo97,

  You can reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not; I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

  If this does not help then try to install updates manually, here are the links where you can download updates.

  Update for Windows XP (KB973687) (32-bit)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b643267-9116-4258-A53A-5a41426dcbcb&displaylang=en

  Update for Windows XP x 64 Edition (KB973687)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=4bdcdabe-f1fb-4465-ACC3-1db8a5b19491&displaylang=en

  Update for Windows XP (KB923561) (32-bit) security

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=50a8519a-503e-43dd-A78A-c1bc764fd213&displaylang=en

  Update security for Windows XP x 64 Edition (KB923561)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8133d58d-CA11-4f24-81EC-1766cd6cd3b2&displaylang=en

  Note: Download the correct version of the update.

  Before installing the updates put the clean boot computer and continue the installation. To put the computer in a clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing the updates, follow step 7 to start the computer in normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.