laptop is in bricks during the update of the bios

Similar Questions

• recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the proce

  recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the processing of hundreds of images that I usually take on a weekly basis.  I bought a new faster laptop, but when I looked for the cd with the software of series and I couldn't find in the mess of Christmas.  I downloaded a trial version of lightroom and got, it works on my new laptop. Is there a way to access the serial number of my version already installed and insert it in the version of track to make it work for me?

  Myron

  If you take the time to register to your original with Adobe installation (which most people do not), you can log in to your Adobe account and get the serial number. If you use a Windows computer and still have access to the old computer where Lightroom is installed, you can do the following:

  1. in the window folder options, make sure that you are able to see hidden folders.

  2. go to the C:\ProgramData\Adobe\Lightroom folder.

  3. use Notepad to open the file, Lightroom 5.0 Registration.lrreg

  You will be able to retrieve your serial number of this file.

• Smartphones from blackBerry Torch 9810 in bricks during the update - OS Bundle 1149 7.1.0

  Carrier - Vodafone.

  The unit starts the update and then that's it.

  The device stops on the scene to save and there is absolutely nothing that will stop the update or complete the update.

  My device actually drained its battery during the night while he's stuck.

  Battery grips do not work. The phone re - opens on the scene broken once it restarts.

  I need help fast people.

  Thanks in advance.

  [I know it happens probably, but I have personally never heard of all iPhone users never bricklaying.] [This is one of the reasons contributing to the Apple are taken seriously as a consumer company and RIM not taken particularly seriously, not more.]

  Hi sdgardne,

  Thanks for your advice.

  In fact, until you sent [even if you did respond pretty quickly] I had read somewhere that the question I had seems to be caused by the device trying to save [Yes it * was * an OTA update, I was trying to] and run out of space.

  Tellingly, the process seemed stuck, several times, while the backup process was trying to save my settings social feeds, files etc.

  Because I followed a lot of people on Twitter [5.4 K] and also FB may have back-up stuck at that stage was not surprising.

  So I tried to restart the process of updating together, via the desktop software.

  I managed to restart and paradoxically, I could right there break the cycle re-try to auto by the software update.

  I then cancelled the update total.

  Then I deleted Social RSS, Twitter and Facebook.

  Then I restarted the process of new - OTA update as it happens.

  This time, though lengthy, the update was successful.

  I'm now trying to reinstall the demolished Apps.

  See you soon.

  [No, did I forget to save before you restart the update!]

• Satellite A300 does not start after extinction during the BIOS update

  Hello

  I tried to update the BIOS after reading a TOSHIBA TEMPRO alert, after some time, apparently not run so I ran a second time, then both ask of BIOS appeared in the taskbar only and it froze while I did not start the upgrade or anything like that I had to the power off.

  I tried to restart, but now, it just on the screen stays black (the monitor is not powered, as if the system was not running), all LEDS are powered with flashing 'drive access', the led on the DVD Player keeps flashing making a noise every 3 seconds or more.

  I read on the forum that there may be no solution but to take it to an authorized service provider but I'm willing to take any possible solution before you do.

  Thanks for any advice.

  Alex.

  Hi, mate

  Unfortunately, you need to be reflash the Bios as something that went wrong during the update. You should contact the Asp and ask them to reflash. There is no other way to get your laptop to work.

  Good luck!

• Satellite A200 - 1 GB block during the bios update - will not turn on

  Need help please, I was updating of the bios. And the process is stopped at: 2/18. I wait an hour and i decided to turn off the laptop. Know I can't turn on. Nothing happens. Anyone know how the recovery mode?

  Thank you

  (Sorry for my bad English)

  Josefa Hello,

  It sounds as if you of the BIOS chip was damaged during the attempt to update failed, and unfortunately this will prevent you from starting your laptop so that you can tyr to redo the update.

  In my view, that it will be necessary to bring or send the laptop to a Toshiba authorized service agent who has the equipment necssary to re flash your BIOS chip.

  Kind regards

• Satellite 1900 203 stops during the bios update

  I downloaded the BIOS update for my Satellite 1900 203 and put it in the floppy drive. the problem is that when updating the computer suddenly stops.
  I think the problem is in the software, but I can't get a solution of it...
  Fred

  Hello

  I would not recommend to download and install the BIOS on Toshiba Canada website!
  As far as I know your laptop was designed for the European market and you should always use the driver, BIOS of the Toshiba site European and tools!

  But I agree with dnf666. If the laptop works properly it s not necessary to update the BIOS!
  And note: the bad BIOS or bad BIOS can damage the module ROM!

  On the Toshiba page, you will find a teaching how BIOS should be updated on several models of laptops!

• (P50) Blue screen during the BIOS update

  Hello

  I'm trying to update to the latest version of the BIOS, http://support.lenovo.com/se/sv/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50...

  (Lenovo ThinkPad P50, (20-0007MS), Windows Enterprise 10, 64 - bit, build 10586, suspended BitLocker.

  But when the update starts and it comes to read current Bios, the laptop gives me just a blue screen and the error:

  
  Your PC rann in a problem and must restart.
  We are just collection that some info of the error, and then we will restart for you (xx % complete)

  If you want to learn more, you can search online later to this error:

  System_service_exception (TdkLib64.sys)

  A google search gives no results.

  Comment to Moderator: Fixed URL.

  Nice day.

  I'm sorry that I can't help with the problem you are experiencing using updater .exe.

  If ensure you that you need the update, you can try the boot disk method: http://support.lenovo.com/us/en/downloads/ds106109

  I hope this helps a little.

  Kind regards.

• Why my laptop turns it self during the night?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: usually I close my laptop just around midnight, with no problems. It is not too slow or too fast. but almost every night, precisely 00.04 am my laptop turn on yourself. and I don't quite understand. have you made me one a butten by accident and activeted, withought knowledge?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You probably have Wake On LAN on 'active' in the BIOS and have something updating at 03:00. It is, for example, the default for Windows Update. To disable the Wake On LAN feature, go into your BIOS.

  BIOS: Frequently asked Questions - http://windows.microsoft.com/en-US/windows7/BIOS-frequently-asked-questions
  http://michaelstevenstech.com/bios_manufacturer.htm
  http://www.uktsupport.co.UK/reference/BioSP.htm http://www.computerhope.com/issues/ch000235.htm MS - MVP - Elephant Boy computers - don't panic!

• Satellite L450D PSLY5E freeze during the BIOS update - now does not turn on

  Hi guys,.

  I have a Satellite L450D. I recently tried (unfortunately) update the BIOS after a clean installation, because the FN key no longer working to bring up the toolbar.

  Winphlash program froze near the end and the system remained frozen for a good half-hour. The only way out was to remove the battery (as I know in any case).

  Now, the system will light with battery in or out and plugged in. I guess I've damaged the hard drive or the card mother or something.

  Is it possible to fix? Or is it?

  Thank you very much for your help.

  BTW - I know now not to update the BIOS unless it is ABSOLUTELY necessary and well advised.

  Joey

  > I guess I've damaged the hard drive or the card mother or something.

  The disk HARD isn t damage but the Rom module where the BIOS is stored was not flashed properly.
  I guess that this happened because the flash procedure was interrupted.

  I'm not sure if this can be fixed perhaps the service guy could flash the ROM module with special disc of crisis of the BIOS.

  I keep fingers crossed

• M40-277: the laptop is very slow, during the writing of CD/DVD

  Hello

  I have a problem with my DVD writer. When I try to write a CD or DVD with my laptop, my laptop is very slow, I can barely move my mousepointer and my buffer State maintains have failed (see screenshots). Even when I try to play a CD or DVD it slows down my laptop. I don't know what the problem is. Can someone help me?

  I have this laptop: "Satellite M40-277" with the DVD-RAM UJ - 841S.
  Screenshots:
  http://users.skynet.be/fa027951/s1.jpg
  http://users.skynet.be/fa027951/s2.jpg
  http://users.skynet.be/fa027951/S3.jpg

  Thank you.

  Hi Gianni,

  I use Nero to burn DVDs, and one of the configurable options is the task of "priority". If I set it to 'high' then my phone behaves as you described, that is very slowly. Check if you have you encode/burn too high task priority.

  Kind regards

• Computer laptop 15-ay011nr: access to the BIOS

  Hello

  I have a laptop HP dating a week 15-ay011nr that does not allow me to access the BIOS. I do not see the message "press ESC for Boot Menu", but it starts directly on the hp logo.

  With reference to this previous post:

  http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Access-to-BIOS/td-p/1504303 on a Pavilion dv6

  I tried all the steps except the last (remove the RTC battery).

  I wanted to make sure if this solution applies to 15 laptops and if I do this or else, given the warranty has not expired

  Any suggestions/help would be greatly appreciated

  Kind regards

  KristiD

  Only other thing I can think of who isn't in this post is to restore the bios, you can now win + keys B and turning on the holding of these keys, you can release it when the update/recovery of the bios screen
  
  After that try with Esc or f10 key immediately after the power
  
  If this does not work then I would recommend to contact your warranty computer HP

• Laptop not start after upgrading the BIOS crash

  Hi all

  I just want to ask if there a chance to reactivate my Satellite A300 after crash BISO update without it sends to the service of Toshiba.

  I downloaded the new BISO and he started in the Windows menu. After a few seconds my PC crashed and everything was frozen.
  I turned off the PC.
  Now, when I press the power button to boot up the laptop, the screen is black and I can a sound BRR, BRR, BRR of the CD-Rom drive.

  Don't you think that it is possible to boot from a CD or something like that. Is it possible to reactivate my phone?

  Your help would be really appreciated!

  Thank you very much

  Best regards

  Chotte

  Sorry but if the BIOS chip is damaged there is not a lot, you can do about it. You must contact the Toshiba authorized service provider.

• Equium A210-1as turns off during the Bios flash

  Hello group,

  My computer laptop girls off for a flash bios because of blocked fan (dog hairs dust etc.) and its fried bios chip.
  I think that there is a partition on the Bios chip which can upgrade the bios in a critical state of flash using combinations of keys.

  I tried all of this and have a laptop dead yet.
  I contacted someone on the net that sells preloaded Bios chips and instructions to replace them, but I must first of all identify the chip on the card.
  Is there any reading that can identify it for me on a toshiba Equium A210-1as... psafje-005005ks

  Thanks for any help Paul G...

  Hi mate

  Usually it s is not necessary to replace the BIOS ROM chip on the motherboard.
  In most cases, the ROM module has to be reflashed again.
  It seems that the module ROM was not properly flashed and the process interrupted
  The technician of the ASP can reflash the module using a disc of the BIOS crisis.

  I recommend you to get in touch with the guys from the ASP in your country and ask reflash BIOSES.

  Good luck

• Brand new Aspire E11 (E3-111) brick by the BIOS utility official Acer - what now?

  Yesterday, I bought a new netbook for my girlfriend. I decided to make sure that the netbook is using the latest BIOS and latest drivers. So I downloaded the BIOS utility official support page (http://www.acer.cz/ac/en/US/content/drivers/5329;-;) Aspire 20E3-111%), extract BIOS_Acer_1.05_A_A.zip and launched BIOS_Acer_1.05_Windows\ZHJ_105.exe.

  The utility began to update the bios without asking (!), the system has been rebooted and I also saw a progressbar finishing 100%. Then I waited... nothing (battery was full and connected to the AC). Now, the netbook is dead. Power button does nothing.

  Is there something I can do before I go back?

  My broken netbook has been replaced by a new. You can be sure that I won't try updating the BIOS again ;-).

• Computer laptop MSI cannot go beyond the BIOS at startup

  Hello world!

  I'm trying to fix computer MSI laptop of my roommate (I don't have access to this right now, but I'll post the pattern later) which initializes more. He said he picked up the phone and moved to a different location on his desk before encountering this problem. When you turn on the laptop, the MSI and other logos appear. According to my roommate, the function keys to access the BIOS settings usually appear shortly after turning on the power, however they do not appear and the system never moves past this white screen of the BIOS. The motherboard doesn't give any beeps or other diagnostic codes. Here's what I did in an effort to fix it until now:
  • Took a CD - RW in the optical drive (there is no boot sector and the optical drive has priority boot).
  • Disassemble the laptop and re sitting 3 sticks of RAM, for a total of 12 GB. One of the sticks seems to have a small spot on one of the contacts, and I removed it by rubbing lightly with a gum pink pencil.

  Unfortunately, we have not made any progress, and the problem persists as described. Normally I would Flash the BIOS at this stage, but since there is no startup options, what else could be?
  Note: the dual-boots Windows 8 (primary) and Ubuntu 12.04 LTS, system with the GRUB bootloader used for the selection of the OS.
  Thank you in advance for your help!

  Hello

  If you can't even get into the bios, you need to look in the manual for a CMOS\Bios 'Clear' or the 'Reset' button or the rider...

  If you can get into the bios, make sure that the graphics card is set up correctly...

  Some machines have a CPU\GPU with an additional AMD or NVidia graphic chip combo...

  The machine may be trying to use the bad.

  Try to remove EVERYTHING except one that the memory sticks, and one by one try them individually...

  Also try to isolate a possible bad slot trying a few sticks of different in each slot individually.