Laptop lock in mode "Eve"

Similar Questions

• No Internet connection when the laptop is off mode "Eve".

  When I close the lid on my laptop (which puts the computer into sleep mode) or he falls asleep with the lid open, there is no internet connection when I wake the computer.  I have to either run the Troubleshooter or perform a reboot to get connectivity.  This problem just started and I got the laptop almost 2 years. It runs on Windows 7.  I don't know much about computers.  Does anyone have any suggestions?

  When out of standby or hibernation, your wireless network connection can not reconnect if power on your wireless adapter options are set to a power saving mode. To check or change your current power options, follow the steps below for your operating system:

  1. Open Power Options by clicking the Start button, click Control Panel, clicking system and security, and then clicking Power Options.
  2. Next to your currently selected power plan, click change plan settings, and then click that to change advanced power settings.
  3. Click to expand wireless adapter settings section, and then click to expand the Energy saving Mode section.
  4. If the setting is currently nothing else that "Maximum Performance", click it, and then select A maximum Performance.

  You can also set the setting on drums on "Maximum Performance". For more information on power management, see the feature page of power management on the Microsoft Web site.

• Satellite L750 back on after mode "Eve"

  Daughter has a Toshiba L750 aged from 4 months working under windows 7. She is in college so it uses every day. It is basically remains connected. If she is, she will turn it on and leave it on all day. He'll usually just in mode "Eve" and she must then set password to return to the office.

  A few times he went into mode 'sleep', all lights power etc. are light but it back on. To come she must disconnect the power supply and the battery, plug it back and there it goes. If she died it normally at the end of the day, he simply never 'not started' its just twice in the mode 'sleep'.

  What may be the cause? Permanent connection to the network? Constantly lit? Settings problem? Hardware failure?

  Thank you

  (PS... Please be gentle with answers. Even if I can usually follow basic instructions OK, any mention of the BIOS etc etc who brings me a cold sweat!)

  Hi Mike

  I would try to give some info gently ;)
  To be honest I'm not very well why the laptop does not wake from sleep correctly but I read here in the forum about similar issues and in most cases, the BIOS update was necessary please don t m download panic now ;)

  First of all I recommend you check the version of your BIOS.
  Here you can find beautiful instruction how to do this.
  + _How to check BIOS version_ +.
  http://APS2.toshiba-tro.de/KB0/HTD0602WA0000R01.htm

  Now, visit the European driver of Toshiba page and check the latest BIOS available.
  If there is a superior/new version available for download, try to update the BIOS.

  Here is a detailed update of the BIOS instruction:
  http://APS2.toshiba-tro.de/KB0/HTD9502M10000R01.htm

  Hope that this would solve your problems

• Loading the laptop locked Windows Updates

  My laptop locked HP at "configuration updates stage 3 of 3-84% complete.".  Do not turn off your computer. "This has been in effect for 2 days.  Are there solutions to complete this update?  Finally, the screen where I enter my password and go to the main page.  However, it won't let me load all programs.

  Hey JD-Houston,

  Thank you for using answers.microsoft.com

  If I understand what you're saying, this is the case, I think that the system is suspended to step 3 of 3 updates and then, he will present a screen connection for you, but then it stops and does not let you move forward?

  If this is the case, let me introduce you to this Microsoft Article on how to recover from an update failed

  • http://support.Microsoft.com/kb/949358

  Try some of the steps listed and let us know if it was the information that you are looking for.

  IF it goes back to you and where you can update your system, follow the steps for a clean boot using step 1 of the following article in the Knowledge Base STEP 1 of this article

  http://support.Microsoft.com/kb/929135>

  After you follow step 1 of the above article, try new updates, if they fail once again let us know.

  Finally, if the updates fail, or if they do follow STEP 7 of this article to recover your system in normal startup mode.  http://support.Microsoft.com/kb/929135

  Keep us informed to know if this solves the problem or, in addition, assistance is needed.

  Kind regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• How can I take my monitor off mode "Eve"

  How can I take my Q1859 monitor off mode "Eve"

  Hi there @Ally55,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you are looking for help with a screen go to sleep. I'm happy to give you a helping hand with this.

  Please give this document a try: HP and Compaq monitors flat screen - Flat Panel Monitor display of the Message on no Signal, Signal out of reach, sleep or energy saving.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Why there is no cursor showing on my 5s notification, when in lock screen mode?

  I do not understand this question.
  I used 4 s in the past, where in the lock screen, there is a slider for the notification at the top center... but I recently bought a 5 s; where there is no option for access to the notification Center, in LOCK SCREEN mode.
  I made sure that all possible settings for him, but it doesn't always show only not the slider for the notification Center...
  WHY?
  Fact 5 s do not have this option as 4s, or something else is missing?
  If someone have any knowledge on this subject, please share...

  Application settings > Touch ID & password (or maybe just password) > [scroll down to ALLOW the ACCESS WHEN LOCK] > notice of Notification [turn on].

• my laptop is in mode "sleep" and I can't wake him up. Help

  My laptop is in mode 'sleep' & I can't wake up help to...

  Help! »

• How can I delete this file which allows my laptop go "standby mode"?

  How can I remove this plug-and-play of windows operating system Manager file the file is umpnpmgr.dll version 5.1.2600.5512 that causes a problem for my laptop in standby mode. I need to remove WRN_POWER_EVENT_SERVICE_VETO. MY LAPTOP IS a TOSHIBA TECRA 5 and operating Wndows XP Professional all updates to this day and has been scanned for viruses. I picked this up from the eventvwr handler on my system.

  It is not a file, it is a message of a piece of hardware attached to your laptop or inside the laptop.  This piece of hardware is refusing the request to enter the mode 'sleep'.  You need to know what hardware is rejecting the request and then either remove, see if the updated drivers will be repaired, or use a sleep mode that does not generate this message.

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• my laptop keeps going mode hibernation for no reason

  my laptop keeps going mode hibernation for no reason

  Hi Alanbyrne1982,

  Welcome and thank you for viewing on the Microsoft Answers community forum.

  It seems that the Hibernate your computer option is turned on. To resolve this problem, I recommend you to follow the steps mentioned in the link mentioned to turn off the hibernation below feature.

  How to disable and re-enable hibernation on a computer that is running Windows Vista:

  http://support.Microsoft.com/kb/920730

  In addition, mentioned below are instructions to change power options where the computer goes to sleep instead of hibernation.

  http://windowshelp.microsoft.com/Windows/en-US/Help/495c2226-19f1-49eb-9fd8-6dd7f2c0b49e1033.mspx.

  Please try these and keep us updated on the status.

  Take care.

  Kind regards

  Cedric M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My continuous HP desktop computer to go to sleep more I use my computer. I have disabled the option to sleep on POWER SETTINGS, but he continues to go to mode "Eve".

  For the past 2 weeks my HP desktop computer has begun to enter the mode "sleep" whenever I use it. As soon as I turn on my computer it goes immediately into mode "Eve". I would leave it alone for a day or to and it won't happen again. More I leave it alone is more of my time. I tried to change my settings on the POWER SETTINGS, but he continues to go to mode "Eve". I don't know if it's a question of a hardware problem software. Help, please.

  Hi MakCalixte,

  Did you recent hardware or changes to the software of the system?

  Method 1:

  You can try to uninstall the graphics card or roll back the graphics card and check if it helps.

  For more information, you can consult the following articles:

  Uninstall a program

  Restore a driver with its previous version

  Method 2:

  You can also consult the following articles and check if the problem occurs in safe mode and let us know the results.

  Start your computer in safe mode

  Hope this information is useful.

• my laptop is insafe mode and now my screen is huge and I have no sound while it is in this mode... How do you turn off safe mode

  original title: safe mode

  my laptop is insafe mode and now my screen is huge, and I have no sound while it is in this mode... How do you turn off safe mode?

  Hello

  audio drivers are not loaded in Mode safe

  read this to get out of Safe Mode:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

• My pc will not boot mode "Eve". black screen, reboot reboot safe mode then anouther and all is well.

  Turning on my PC after the mode 'sleep' or when it was completely off my PC does not start until... White screen.  If I reboot and select Safe mode it loads. If I can restart in safe mode, and then it starts and everything works.

  I tried a lot of bugs, power, the settings of the mouse settings, and cd to repair vista, reformat and clean install and I still have this problem

  My recent attempts to fix it have wondered if this might be a problem with my USB drivers. My mouse is USB and when I boot I hear the sound that plays when I plug in our remove something from one of my USB connectors. just a quess.

  Any help would be appreciated.

  Thank you

  Dave

  My pc = Windows vista service pack 2

  MB = Gigabyte p35-s3g x 64-based pc

  Is Intel (r) Core (TM) 2 Duo CPU E8400 @3. 00 GHz

  = ram 4 GB

  ATI Radeon HD 4870 1 concert =

  = X Fi Xtreme Gamer Sound blaster Creative

  Hi Dave,.

  You can try to disconnect all external devices, including network card and put the computer in mode "Eve" and check if it comes back.

  You can also try to update the graphics card and check if it helps

  http://www.AMD.com/us/products/desktop/graphics/ATI-Radeon-HD-4000/pages/ATI-Radeon-HD-4000-series.aspx

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.1&product=2.4.1.3.36.3.6&ContentType=KB+article&OSType=&keywords=&items=20

  Also check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

• Programs can not be started, or no response after the computer was not awake mode "Eve"

  Dear Sir.

  My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

  Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

  Thank you very much!

  Eric

  Hi Eric,.

  You can follow these steps:

  Step 1: perform a clean boot to verify if an application or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Configure the power settings for keyboard, mouse, and other devices.

  a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
  b. click on the Hardware tab, and then click the properties button.
  c. click Change settings.
  d. click the power management tab and verify that the allow this device to wake the computer is selected.
  e. If "Allow this device to wake the computer" was not selected, select it and click OK.
  Follow the same steps for the mouse as well.

  If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
  connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
  problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

  Refer to this article for additional troubleshooting steps.

  
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.