Laptop Pavilion DV 6636NR. 4 years, does not rest not turned on, keep retrying every 15 seconds.

Similar Questions

• Computer laptop HP PC DR57-AAA10225GR: System does not turn on

  My PC does not turn please, it goes into the BIOS and display 'System' off and displays this code "99119113". Should wat I do pls?

  Hello

  Try

  26871135

  Concerning

• Pavilion 15-e020tx: does not turn off pc portable hp pavilion 15-e020tx

  Hello.
  I have a pc hp laptop pavilion 15-e020tx. It does not turn off and does not wake up mode 'sleep'...

  I tried to restore my laptop to factory setting, updated everything I can, but it still does not work
  Could someone help me please

  Update the BIOS to the current version. A F.24. The direct link to the download is below.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69897.exe

• HP Pavilion 15 p150nh: laptop does not turn off completely

  Hello!

  I have a laptop HP Pavilion p150nh 15. It does not turn off. If I want to close it will turn off completely. I have black screen but the vens are still on and the buttons start led is also single beds. I've tried everything. Updates, hard reset I was looking for BIOS but nothing.
  Help me please!

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  Original title: undetected sd eject not

  I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  From my understanding, most laptops allow you to simply remove the SD card back.  Others have a simple spring mechanism that requires you to press the memory card slightly until you hear a "click", similar to a click on a retractable pen, which must eject the card.

• My laptop is plugged in, but it does not load

  My laptop is plugged in, but it does not load... I bought a new battery and a new charger... can it be?

  Try this:

  Disconnect the AC

  Shutdown

  Remove the battery

  Connect AC

  Startup

  Open the Device Manager

  Click plus the sign (+) next to the category Batteries, all ads in 'Microsoft ACPI Control method battery compatible', then right-click and select uninstall in the dialog "Confirm device uninstall", click OK. (it's ok if you only have 1 of them).

  Click the plus (+) sign next to system devices.
  The "ACPI fixed features button ' right-click and choose uninstall. In the "Confirm device uninstall" dialog, click OK.

  Shutdown

  Disconnect the AC

  Insert the battery

• My hp pavilion elite hpe-204f video does not work

  My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

  Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

  Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

  Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

  Thank you very much for the research.

  Hello

  The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  If the above is successful, then re - install the map graphic and clear the CMOS.

  Another thing to try:

  A good cable video know.

  A known good monitor.

• HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

  HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

  When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

  Sync Center says not connected and nothing is happening on the computer.

  When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

  I don't see the phone of the link computer to which is connected to the hp laptop.

  the USB port works with my printer.

  What should I try next?   Thanks for your help.

  Hi Bill,

  You can try the following steps and check:

  Method 1:

  Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Method 2:

  If method 1 may not then try the following:

  If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

  If the problem persists, please contact HTC.

  Please post with the State of the question.

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Hello.. I have laptop (hp probook 4520 s), keyboardis does not.

  Hello.. I have laptop (hp probook 4520 s), keyboardis does not. only the letters 'B' and 'n' How do I reactivate? because when I use a keyboard external usb it works? Help, please

  Helder salvation,

  Did you of recent changes made to your computer?

  We will reinstall the internal keyboard drivers and check.
  
  a. click Start, type Control Panel in the search box, press enter, click System, click Device Manager, click on keyboard.
  b. you should find the internal keyboard part as well as any external keyboard used.
  c. right-click on the keyboard integrated in the list, click on uninstall.
  d. unplug the external keyboard.
  e. restart the computer and check if the keyboard internal works.

  Since the external USB keyboard works, if drivers did not fix the internal keyboard problem, I suggest you to contact the manufacturer to check if there is a hardware problem.

  Hope the above information helps.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• My new laptop has crashed and disk backup does not work, can download a boot disk for Windows 7, I hit legitimate?

  My Acer 5745 laptop crashed, my backup boot drive does not work. The laptop was running Windows 7 when I bought new in November 2010. Y at - it somewhere that I can download a floppy or a recovery disc?  'The Source' store where I bought will not help, they said they had to go back to Acer and it could take up to two months to return to a charge of about $170.

  Thanks for any help, someone might be able to give.

  A laptop bought at that date will still be under warranty, there should be no costs involved, contact Acer technical support.

  I guess by the backup startup disk, you mean the set of recovery disks you did when you first used the PC?

• My dell studio 1555 laptop does not turn on

  Hello

  Does not turn my dell studio 1555 laptop computer. I tried all the troubleshooting option provided in the dell forums.

  Here are the steps:

  • Disconnected all external devices on the computer, including the battery and the AC adapter / CC.
  • Press and hold the power button for 20 seconds.
  • Reconnected the battery and the adapter.

  After checking all the options of this still my laptop does not turn. I am not able by any beeps as well.

  I even checked the video output connect my laptop with an HDMI cable on other devices (TV). The screen is blank.

  Kindly let me know what we can do more.

  PS: I have no warranty for my laptop.

  Thank you

  Kirti.

  Check that the LED on the adapter lights before plugging the end of the book.  If this is not the case, replace the card.

  Try without the battery - if it will then light up, the battery is bad.

  Unplug, remove the battery, press power for 30 seconds and remove and reinstall the bars of memory.  Try again.

  If it lights with a good map and without the battery, replace the motherboard.