Laptop play outloud sounds when the headphones are connected.

Similar Questions

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• MacBook randomly landed volume when the headphones are connected.

  Hey,.

  There is something wrong with my MacBook. When I plug my headphones, the Mac randomly landed the volume at any time. I thought the keyboard can be broken, but it doesn't happen when the headphones are connected so it may be a problem with the software (I think?). Has anyone experienced the same problem? Do you know how to fix this?

  My Mac is the MacBook Pro 15 "retina (mid-2014) running the El Capitan 10.11.6

  Please try resetting the memory NVRAM and SMC.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "If the battery is good behaviour."

  https://support.Apple.com/en-us/HT201295

• Since iOS 9.3.1 my phone plays music on its own when the headphones are connected

  Since the last update, my battery does not last a whole day more and for some strange reason when my headphones are plugged into the music start playing without me from music. Music plays on its own at random times. Several times when I have my phone on the desk, I heard the beginning of music playing also on its own that helps the battery drain but other that the battery for some reason life any has been terrible. I hope Apple fixes this soon and also the restoration of the ability to use 3G to help save battery life. I have actually charged my battery to 100% and without touching all day insured no apps running in the background and I noticed my battery was 70% when ended the half-day.

  Try settings-> general-> transfer & Apps suggested and disable "Apps install".

• Satellite Pro 4600: beep when the headphones are connected

  Greetings to everyone.

  I feel a strange audio problem with my Toshiba Satellite Pro 4600 headphone output port. Whenever headphones are used, bursts of low beep occur regularly every 3 seconds or so superimposed on what playing right now. Each burst lasts about one second and consists of about 8 fast beeps. The beeps occur after Windows starts and end once the system off. I thought that it was a driver issue, but I use the latest driver for my card, downloaded from the site Web of Toshiba (package name: s5105sndx.exe).

  Can anyone help?

  Thank you for your attention.

  This problem doesn't appear if the headphone is plugged or also with the speakers if the headphones are disconnected?

  If this happens only if the headphone is connected if there is something wrong with the headphone jack.

• No sound from speaker, but sound does not return when the headphones are connected

  I have an Acer ASpire V3 - 572G
  When I unplugged my headphones don't switch on my speakers. When I reconnected my headphone the sound returned ony through the headphones.

  Things Ive tried
  Checked in the playback devices to see if the speakers have been checked as audio by default
  Reinstalled and updated my Realtek Audio drivers.

  Was finally able to get the sound back to my speakers. Seems it was my audio jack, sensing that something was plugged when none existed.

  I'm a Manager DD Realtek Audio and messed with the retasking speaker options. With the help of user help? "s solution and audio in my speakers briefly returned." Then went away.

  So I turned off my laptop has had little compressed air and a toothpick and went slightly on the edges of the socket. Transformed sound and return on return.

• His laptop works only when the speakers are connected

  Problem_ZERO SOUND SOUND_Please Help!

  What do you do if your sound does not work?  I have a Dell Latitude E5500.  One minute I was listening to tunes on Youtube, and the next minute, I couldn't hear anything.   When I plug in my speakers, I get sound.  Someone please help me get my portable computer to operate with the sound when the speakers are not connected?  Thank you.

  Willy

  What do you do if your sound does not work?  I have a Dell Latitude E5500.  One minute I was listening to tunes on Youtube, and the next minute, I couldn't hear anything.   When I plug in my speakers, I get sound.  Someone please help me get my portable computer to operate with the sound when the speakers are not connected?  Thank you.

  Willy

  See if this Microsoft Help and Support link can help:
  No sound in Windows
  http://support.Microsoft.com/GP/NO_SOUND

  t-4-2

• Pregnant active satellite L855 - 10 p: even if the headphones are connected

  Hello

  I have an interesting, a very minor, but quite annoying problem.
  Basically, every time I start playing some audio on my laptop, and I plugged headphones, it will play through the speakers during the first few seconds and then switch on the headphones.

  It doesn't matter how long the headphones were in.
  If nothing has played, and I then click to play a song or video or something, it will do.

  Its quite annoying as obviously I use headphones when you try do not disturb others with my noise, this kind of ruins it.

  I can not turn off the speakers, as it seems to disable the port audio jack as well.
  Everyone has ever known, or have an idea how fix?

  Thank you

  Charlie.

  Hi guys

  The question is not related to a faulty headphone jack port, but the settings that you can find in the Realtek HD audio Manager (models L855 supports the Realtek sound card)

  In Control Panel-> Realtek HD audio manager, you can find symbol small file placed on the upper side right.
  I m not fine the name of these options, but when you click it the connector settings window will open.
  Enable auto popup dialogue.
  Now, every time when headphone is connected, you can choose helmet as one device that you want to use.

• X 230: speakers put mute when the headphone is connected

  Hello

  My new X 230 with Windows 8 Pro is not being Mute speakers when I plug in the headphones. I have to restart with the headphones plugged so they are dumb, but when I unplug them I can't make it work again until I restart.

  The drivers are updated and verified with those that you download from Lenovo.

  If I use a Bluetooth headset, it cut the external speakers, so most likely it is one thing to jack-related software.

  Pointers? It gets really annoying, I can't listen to music or have private conversations unless I reduce the volume to the minimum unhearable.

  Jose

  I noticed that the problem occurs after the first time the PC goes to sleep. After he took over, when you plug in the headphones the speakers don't be silent.

  It worked for me, but (from another thread)

  Go to control panel,

  then the Realtek HD Audio Manager

  then device avancΘs,

  then move from classic mode to the mode of multistreaming.

• Send warning message when the iPads are connected?

  OSX can be configured to send an alert message when an iPad is plugged?

  I want to receive an alert message when iPads are connected to the Mac so that I can remote log-in updates and run on iPads.

  Can write an Applescript application called iTunes that you send an email and then calls the real itunes.  It is a concept.  Don't know if you can get the real iTunes work.

  ---------------------------

  The real way to make updates is to get an mdm that supports wireless updates.

  MDM - Mobile device management

  MDM

  AIRWATCH, Meraki, MobileIron, Profile Manager on OS X Server or Zenprise

  For a comparison, see this page:

  http://www.enterpriseios.com/wiki/Comparison_MDM_Providers

  AIRWATCH

  http://www.Air-Watch.com/

  Configurator of Apple and Apple Profile Manager

  "Apple Configurator makes it easy for anyone to mass configure and deploy iPhone, iPad and iPod touch to a school, company, or institution."  Limited to Mac.  Connects via a USB cable.
  http://iTunes.Apple.com/us/app/Apple-Configurator/id434433123?MT=12

  «Profile Manager allows you to configure the devices OS X and iOS if they re implemented to use the resources of your company or school and settings, apps and books as your organization needs.» Profile Manager creates parameters and preferably bundles to devices and deploys to the devices via the Mobile Device Management (MDM). "Requires OS X server.
  http://www.Apple.com/UK/support/osxserver/ProfileManager/

  GroundControl is an alternative to the configurator to Apple. "IOS provisioning enterprise-wide, updated, surveillance, smart policies... all in the cloud."

  https://www.groundctl.com/

  Meraki - A free MDM [expect lots of e-mail and phone calls on the updates]

  Read the presentation of the product.  Click "get started now" to register.

  https://Meraki.Cisco.com/products/Systems-Manager/?ref=YZRzCR

  Video on how to install and use Meraki.

  https://Meraki.Cisco.com/blog/2012/08/how-to-get-the-most-from-Meraki-systems-Ma swim.

  MobileIron

  http://www.MobileIron.com/

  Zenprise

  http://www.Zenprise.com/

• No sound when the TV HDMI connection

  original title: I have Dell XPS 15z. When I connect HDMI to my LCD TV, sound is not from TV. He continues to come from the laptop. I tried to put the LCD as a default but option does not come.

  I have the Dell XPS 15z. When I connect HDMI to my LCD TV, sound is not from TV. He continues to come from the laptop. I tried to put the LCD as a default but option does not come. Let me know what can be done to fix this?

  Run a line of cable to the line in socket of your TV.

  Some HDMI sockets on laptops do not allow for audio transfer. Stereo line is the only way to go in this case.
  See you soon,.
  Jerry

• Windows live mail will not play a sound when new mail arrives

  Windows live mail will not play a sound when the mail comes and will not report in the task bar. I 'play a sound when niew messages come' checked in the options. What could be wrong?

  Hello

  The question you have posted is related to Windows Live mail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• Qosmio F50-108: speakers still work same headphones are connected

  I have this laptop and when I insert the headphone output line, my speakers doesn't always work and I heard sound, speakers and headphones.
  What should I do to correct this?

  When I insert the headphones, I want to hear sound only on sound, no speakers on this time, and when I unplug the headphones, the sound should be back on the speakers?

  Help, please...

  Thank you

  Hello

  You should check the settings in the control panel-> Realtek audio Manager
  Pregnant tab contains some options on the right.
  There should be a path analog and Digital port.

  Turn right or left click on the headphone and check if the option has been disabled which allows the sound from the speaker, while the headphones are connected.

  Welcome them

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• I have tossiba laptop when I try music on my laptop speaker works but not the headphones work even not pregnant

  I tossiba laptope when I try music on my laptop speaker works but not the headphones speakers not even extra work

  Hi rajuarman,

  -Headset works fine on other computers?

  -Have you installed the audio drivers on your computer?

  -Not the problem only occurs when trying to play music in Internet Explorer?

  Your question does contain all the required information necessary for us to help you. Please include more information to continue troubleshooting as a result.

  Please see How to ask questions and provide the information required to help others.

  In the meantime, check out these articles:

  Tips for solving common audio problems

  No sound in Windows