Pregnant active satellite L855 - 10 p: even if the headphones are connected

Similar Questions

• Satellite Pro 4600: beep when the headphones are connected

  Greetings to everyone.

  I feel a strange audio problem with my Toshiba Satellite Pro 4600 headphone output port. Whenever headphones are used, bursts of low beep occur regularly every 3 seconds or so superimposed on what playing right now. Each burst lasts about one second and consists of about 8 fast beeps. The beeps occur after Windows starts and end once the system off. I thought that it was a driver issue, but I use the latest driver for my card, downloaded from the site Web of Toshiba (package name: s5105sndx.exe).

  Can anyone help?

  Thank you for your attention.

  This problem doesn't appear if the headphone is plugged or also with the speakers if the headphones are disconnected?

  If this happens only if the headphone is connected if there is something wrong with the headphone jack.

• Satellite A200-1AE: sound from speakers when headphones are connected

  Hello. Sorry for my English.

  I have problem when I started a player (winamp player or a movie or a game with the sound) and I want to change the sound from the speaker to the helmet by plug them into the headphone jack. The sound is still speaker.

  So I just restart this player or the game and then sound is switched to the headphones.

  So in sum up: when I want to listen to the sound of some player I have to plug in headphones first and then start the player in order reverse, the sound is not switched to the helmet line.

  In other laptops with Vista I have check this problem is not to happen.
  Do you have any suggestions?

  Hello Pawel

  I have the Satellite A200 too preinstalled with recovery DVDs. I was very curious and I tested it on my laptop. In my case everything was OK. Through the use of headphones, Laptop speakers are automatically TURNED off. Remove helmet speakers work again.

  I am really confused, and it is really not easy to say what the problem is here. AFAIK in headphone plug it is small, and through the use of headphones this past should disable Laptop speakers. All you can do is check if it happens after clean OS installation, maybe update the BIOS or install the latest driver sound.

  Sorry, but I don't see any other possibilities. If anything maybe you must contact the service in your country. I really can't imagine that this little mixer may be defective but service may only do a check.

  Bye and good luck!

• the Air iPad does not connect to a printer to air even if the two are on the same network

  DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".

  Readhere: printing from your iPhone, iPad or iPod touch - Apple Support

• The iOS to iPhone 4S 9.3 installation fails during the audit with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected.

  Greetings, Installation of iOS 9.3 to my iPhone 4S (model MD234X/A with iOS 9.2.1 (13D15)) fails when checking with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected. as I can browse with Safari ok. I tried "Retry" several times, has waited several hours and "Try again" and turned the phone off and then on again then "Retry", all with the same problem! Help, please?

  Hi Bloggsj,

  Thank you for using communities Support from Apple.

  I see that you get an installation error when installing iOS 9.3 OTA.  I suggest that you try following the steps below to download the latest version of the update:

  If you have downloaded iOS 9.3, but you can not install it, you will need to download the update again. First of all, remove the update of your device:

  1. Go to settings > general > storage & use of iCloud. Under storage, click on storage management.
  2. Find iOS 9.3 in the list of applications.
  3. Press on iOS 9.3, then remove the update.

  Now you can go to settings > general > software update and download the latest iOS update.

  If you can't put day to iOS 9.3 on your iPhone 5s or earlier, iPad Air or an earlier version, or iPod touch

  Take care.

• How does password manager does not work even if the settings are set correctly?

  I've recently returned to version 3.6.17 4 cause version 4 was unstable. Now that I have the old version (more stable) offer not password manager record passwords more even when the settings are set correctly.
  I notice that I had viruses and rootkits deleted (maybe they did some damage) and I cleaned my system with a registry cleaner (maybe he removed some settings through it) and this has not fixed by a clean install.

  You still see the names and passwords in the Firefox password manager?

  Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).

  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck: [] "Permanent private browsing Mode.

• My battery icon is flashing blue to Orange quickly even if the computer is connected to the power supply

  Battery problem

  Dear friends,

  My battery icon is flashing blue to Orange quickly even if the computer is connected to Power.What mean?

  This means that my battery is dead and not load? If Yes... will be the work of the computer until I repalce the battery? And is it safe to use the computer in this mode?

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• Typekit Async loading watch CARE on subsequent loads, even after the fonts are cached

  I got my delivery value async typekit and see visits don't CARE even though the fonts are cached in the browser on the next page. I expect this behavior during the first visit of the page before the police has been cached but do not expect it after its been put in cache. I have the style event policies to manage inactive States and loading of fonts but want to prevent OF happening on pages when the browser has cached fonts and already the js.

  Hi marleneb,

  The behavior you're seeing is expected when you load Typekit using asynchronous ("' async: true" in your embed code "). When you use the asynchronous loading, fonts are always loaded in the background. This can cause a flicker of relief policies, as you have seen, until the Typekit font data is loaded from the cache of the browser or server.

  If you want to share the URL of your website, we can take a look and see if there are any other event police recommendations we can do to help minimize this CARE.  (Feel free to email [email protected] if you do not want to share the site on the forum.)

  Or if you prefer to have the page wait Typekit fonts to be available, you can use the

• I don't see Smart Guides around all the objects on the artboard even if the guides are checked in view

  Hello

  First of all, I don't pretend to be some illustrator expert but I have a good understanding of the functions of Adobe Illustrator key.

  However, when I went to design a logo yesterday, I don't see smart guides (blue lines, see below with all selected items) around all the objects on the artboard even if the guides are checked in order. I do not expect the controls on each being showing unless they are selected, but I do that I expect to see the blue line itself.

  
  

  
  

  I contacted the Adobe Illustrator Chat but really, they do not seem to have a clue and seemed to be intentionally misunderstanding me despite the fact that I sent this image. They were also quite rude!

  In any case, I'm now desperate so someone here can help me please.

  Thank you very much

  Mike

  PS I looked everywhere online for a solution and tried some of those suggested but without success.

  You may not see an unselected object with no line or fill in preview mode (this is why it is called overview).

  You can select it when you don't have fill and stroke in the tools Panel and choose: select > same > background & contour.

• LPN controlled, active checkbox for all subdirectories, even if the org inventory is Non - WMS Org

  Hello

  In one of our instance "LPN controlled" checkbox enabled for all subdirectories, even if the org inventory is Non - WMS org.

  Can I know configuration controls this box in Orgss Non - WMS?

  Thank you

  Bug: 16097371 -SUBINVENTORIES NEW CREATED AS CONTROLLED IN ORGS NON LPN - WMS

  This hotfix will be available for all clients in RUP7 INV/RRS rollup patch.16826285: R12. INV. B.

  Kind regards

  Surya

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Virtual copies are not synchronized in a second Lightroom Catalog even if the metadata are written in XMP and synchronization with the metadata has been selected

  Dear community,

  I use a Mac with 5.7 of Lightroom which is configured to store all the metadata in the xmp files. The Lightroom Catalog is stored locally on the Mac and contains only references to images and their xmp files that are stored on a network device. There is another Mac with the same setup with a local separate Lightroom Catalog and access to the same images on the network device.

  At a starting point, the two Lightroom catalogs are identical - they refer to the same images on the network device and contain the same metadata.

  When I update the properties of the image on the first Mac, these changes are reflected in the xmp file. After using the option 'synchronize' with activated "metadata synchronization" on the second Mac, the modified image properties are visible on the second Mac. It is very good.

  However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated. However, even after the synchronization, the virtual copy is not visible on the second Mac. I can change the properties of the image of the original image and get these changes replicated to the second Mac, but the virtual copies remain the first Mac.

  What should I do also virtual copies get synchronized?

  Thank you very mich for your support.

  Best regards

  Peter

  However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated.

  As far as I know, xmp does not contain information about the virtual copies. If this method to attempt to synchronize two catalogs will not work.

  Better you should use the file-> Export catalog on a single computer and then file-> import from another catalog on another computer.

• Satellite U series: Question about bypassing the battery when connected on AC

  Hi, I am a bit newbie to PC Toshiba laptop (series U) and I was wondering if my laptop has this feature where it bypasses the battery when it is fully charged and the power supply cable is connected?
  I see the battery blue led is on even when it is fully charged and the power is connected, it means that my computer is still using the battery?

  I'm running a lot and I will not waste my battery life.
  Thanks for any comments.

  Hello

  Congratulations on your new machine, I understand that worried you´re for your battery life. I was scared too, but a lot of people here in the forum told me that, in each new machine for many years (i.e. about 6 to 9 years) almost every laptop has an electronic charge that regulates the process of charge of the battery.

  Don t worry, if your battery is fully charged, the built-in charging circuit is a special State that is as "cool cool" to maintain your battery and to protect the battery.
  S better to keep the battery in the machine then removing it.

  Welcome them

• Seeing HP DV5 Laptop speakers stay orange (red?), even if the speakers are on.

  Light said speaker speakers are disabled when they are on. I want that they, want just to say that they ' re on.

  I didn't say there was no noise. I said that the light that I had no sound, even if the speakers were on (work). I rebooted it and it fixed itself. Thanks in any case.

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)