Screen white when connect to TV - Equium M50

Similar Questions

• screen flickers when connected to the internet

  my screen flickers when connected to yahoo on the internet.  doesn't seem to be as bad when visiting other sites such as Google.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > looking for the latest graphics drivers for Vista > download/install them

  See if the information below helps you solve the problem/s you have with Internet Explorer:

  http://support.Microsoft.com/default.aspx/KB/936213/?p=1

  "How to optimize Internet Explorer"

  Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

  ·     You experience performance issues in Internet Explorer.

  ·     You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

  ·     Internet Explorer stops responding.

  This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936215

  "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

  This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936214/

  "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

  This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

  1 use the mode safe mode with networking

  2. perform a clean boot

  3. use another user account

  4 scan your computer against viruses and spyware

  5. run Internet Explorer 7 in "no Add-ons" mode

  Hope the above helps.

  See you soon

  Mick Murphy - Microsoft partner

• WEP encryption key do not forget when you restart the Equium M50-244

  I use a laptop Equium M50-244, with a BT Home Hub 7838 wireless router. Almost everytime I turn on the laptop it has no wireless connection. So I have to go to control panel, network connections and that he can find a new connection.

  I would then type the key to encryption WEP number twice to get a new connection.
  This is obviously a long procedure, so I need to get the laptop to recognize the encryption key and save it for the next time I turn on.

  I am running Windows XP Home Edition with Service Pack 2 and a Norton Anti Virus and Firewall.

  Any help would be appreciated

  Peter

  Hello

  I agree with Louis. Your WLAN cards support WPA encryption and, if possible, you should use it.

  Anyway: try to Setup WLAN to use Windows settings and set WEP password we remind for your WLAN. I have the set up on a lot of laptops different and after choosing the publicly traded WLAN password has already been set and the only thing that must be done is to click on the Connect button.

• Satellite Pro L40 - 15A - Windows XP screen white when the cover is open

  Hey,.

  So when I closed the lid on my laptop for a while and then reopen the lid, the screen remains white (black). The only way I found to get back on the screen is to re-boot.
  In power management, I put 'Status quo' for when I close the lid on my computer and power management is ' Always on '.

  I have the latest Bios and updates to the system.

  Satellite Pro L40 - 15A
  winXP

  Any help appreciated.

  Hi ib1.

  You use the version preinstalled Windows from Toshiba or is it your own installation?

  What to update the display driver? Take a look at the Toshiba page for the new display driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Don t forget to look in the * archives * on Toshiba page because this model is a little older, so all of the downloads are moved in archive.

  Check this box!

• Yoga 14 700 screen white when turned on

  When I turn on the computer, I see the Lenovo logo. After that, the screen turns off but the backlight is always on. Everything on the computer still works except the screen. I tried to connect to an external monitor and a projector, but they both do not detect the computer. My model is the i7 and nvidia graphics. That this has something to do with faulty nvidia drivers?

  Looks like a problem with Windows Me. In fact, it can be also a Nvidia driver problem. I would say OneKey recovery to solve the problem. To do this, hold down the key of Lenovo OneKey recovery on your computer. Here is some information about the OneKey recovery, alias Novo button button. https://support.Lenovo.com/us/en/documents/ht062552

• Laptop screen disabled when connecting to a projector

  Original title:

  Hello, I am trying to connect to a projector Acer H5360 to my computer dv9750 Pavilion laptop under Vista Home Premium using an HDMI cable.

  Whenever I connect the projector, or noting happens and typing FN + F4 I can have my proposed office or automatically after a certain time, my office is planned (without typing anything). In both cases, the office disappears from the screen of my laptop (!)
  The only way to have my laptop active screen is again by disconnecting the HDMI cable AND it's not completely deterministic: it happens that the laptop screen remains inactive after extraction of the HDMI connector and until the power is cycled
  My question is how can I configure the system to always reflect the tower to the projector screen, whenever the projector is attached, while leaving the tower still active screen? before, during and after the setting of the projector.
  I would add only that I did not imagine it's be so complicated to just fix a projector. For example, when I move the same projector with the same cable to my xoom Tablet I just see projected! without doing anything more than the * physical connection *.

  How many times do you have to press the key combination?

  FN + F4 key combination is to switch between monitors. Try pressing the fn + f4 several times until you get show both monitors ON.

  When the monitor of the laptop is turned OFF and the projector is on, press the key combination, the projector must be OFF and the monitor of the laptop must be turned on. By pressing the key combination twice turns the laptop screen and the projector. There should be no instance that both will turn OFF.

  If it does not try to activate your dual display:
  Right click on the desktop-> Output To-> Intel Dual Display Clone-> notebook + monitor. It can vary in defense on your installation, I use a laptop HP and Acer LCD as a second monitor.

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

• Pavilion HP P7 - 1000: screen white when turned on

  When the PC is turned on the monitor responds with a green power light, but remains empty, the PC power light turns on and stays on and the HARD drive light comes on and then disappears. Mouse and keyboard do not respond at this stage. Fans are market HDD is running more DVD ROM lights up when it is started. I tried different hard drives and if you start without a HARD drive there still a blank screen. I also replaced monitor, keyboard, mouse. The real kicker is that from time to time after a lot of power downs and restarts it will boot to the BIOS and load the MBR and everything will be fine. I see that no error it connects.  Any ideas would be apresiated. Thank you!

  I think I got it. The person who is the owner of the PC, said that one of the two USB ports was damaged so I unplugged the two front holes in the motherboard and it works very well and it seems to be faster starting now as well. I must say that this one had me stumped good.

• White screen white when running the app on device Builder

  Good day everyone. I got my application to debug and run on my device (sort of) of Flash Builder 4.5 by forcing it to use Flash player 10 and 2.5 forcingAirVersion but when my application starts all I get is a blank white screen. It is a and the main .mxml file is simply myapp.mxml and it's this package app/src/default

  Solved the problem. I found this: http://blogs.adobe.com/jasonsj/2011/05/flex45_air25_playbook.html it is a playbook_overrides.swc that once included in build path made all the work beautifully for a reason any.

• Screen white when the screen is moved forward

  When my screen is placed at an angle less than 90 degrees, it becomes empty? his fine wen back past 90 degrees, but goes blank when his attacker

  Hello

  Check with the manufacturer of your system, their books online and their forums (if any) than
  probably is by design. No matter what is not a function of Windows.

  Control Panel - Power Options - choose the closing cover

  But that does not affect the sensitivity, or if he stops everything which the hardware manufacturer
  may have set up.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• V20.0.0.267 screen white when loading swf

  Loading our .swf with the last update of the activeX flash and then a blank white screen is displayed instead of the movie.
  Right-click on this space shows: "Movie not loaded" grayed out, and 'on Adobe Flash Player 20.0.0.267 '.

  The user cannot interact more with the framework and this prevents our full service program.

  Please respond with a workaround or difficulty of any emergency.

  

  Hello

  Please update your Flash Player at 20.0.0.270.

  https://get.Adobe.com/flashplayer/

  The problem is resolved.

  Thank you

• Equium M50 bypasses sometimes screen selection and password of account completely

  Sometimes when I start my Equium M50, it goes to the screen selection and password of the user account. Other times he who circumvents completely and go directly to the desktop.

  Hello

  Did you mean the user Windows XP normally account?
  Have you set the password to your account?

  I put t know if it helps but I recommend to delete your old user account and create a new password.

  Windows XP administrator account (versions Home and Professional).
  By default, it doesn't have a defined password.
  In order to avoid serious security problems, it is best to set a password for this account on your computer.
  To do this, follow these instructions:

  1. open the start menu, and then click Control Panel.
  2. in Control Panel, open the icon user accounts.
  3. the screen user accounts lists several accounts that are present on your machine. Note that you will have probably a Director and another (that you named when you configure your computer to start). Select the administrator account.
  4. in the administrator account settings screen, click the "Create a password" link.
  5. in the password creation window, fill in the blanks required. When finished, press to create the password.
  6 you may be asked if you want to make this private account files. Click on either YES or NO (depending on your preferences), then click on finish
  7. it must be returned to the window user accounts. Close this window, and then restart your computer normally.

  NOTE: Make sure you add passwords on ALL accounts on your computer

• Computer HP dm4-1160us laptop - does not work - has a white when turned on screen.

  Computer HP dm4-1160us laptop does not work - it has a screen white when turned on.

  See this page for "no starup" advice, if none of these tips help, the laptop will need professional diagnosis.

  Go to this page, select "Error Messages displayed on the computer"

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=43716&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4308941

• SCREEN FLICKERS WHEN I PLUG THE POWER CORD A/C

  Can someone help me with this problem. My screen flickers when connected im playing games with my a/c power cord. Howerver when I remove the power cord, it works fine on battery. Also my battery almost won't charge at all with my laptop running, but when I put into hibernation or to stop it charges more quickly. Would appreciate any help as soon as POSSIBLE. Its a Dell Latitude E6400, windows 7

  Diagnosis

  The video "Refresh" is switching between 60 (on food) and 50 Hz (on battery), and the screen goes momentarily empty.

  Solution

  So what about current alternative, office > right click > properties > settings > advanced > monitor. Here, under the display settings, set the refresh rate of the screen at 50 Hertz. After you apply these settings, the flashing problem gets fixed.

• Equium M50 connect to the WLan router only when security is disabled

  MY Equium M50 will connect to my ROUTER BELKIN g only MIMO when security is disabled.

  What is the reason for this please?

  Blonde bimbo!

  Hello

  Did you mean WiFi encryption that blocks the entrance to the local wireless network?
  I suppose that you have set the encryption (WPA, WEP, etc...) on your router WLan but didn't configure the wireless network adapter.

  Well, in my opinion, you should check out what WLan encryption makes the card holder and then choose it on the WLan router. The encryption key must be set to the router and the laptop!

• Equium M50-164 crashes when I put the battery

  I have an Equium M50-164.

  I got it over a year now without any problems. I turned on this morning and it crashed (just a white, black screen) even when I tried to open it in safe mode. I have taken out the battery, but left the power cord in and it worked fine, without any problems at all, but when I put the battery with the power cable it crashed again. When you try to start it with just the battery, he would not do anything no lights, no boot at all?

  Help, please.

  Hello

  Does not sound good
  Only the battery is dead and or malfunction of the electronic power supply on the motherboard.
  The two cases are possible.
  Generally, the common user is not able to fix something like this.

  Of course, we can run here on the malfunction but I n t think this will help you.
  In my opinion, the laptop must be verified and some diagnostic tests must be started

  Contact the ASP in your country and explain the guys the situation