laptop screen Toshiba extended

Similar Questions

• Satellite Pro P300 - 23L: can't get screen Toshiba Leading Innovation

  This is a cut and paste from a previous post, but the one I'm having a problem with today (save me typing again!):

  When I start my laptop, it stops on the first screen of the Toshiba innovation and only gives the opportunity to do two things. That's what he said to prevent the page * "Press F2 to enter Setup, F12 to access the selection of Multiboot Menu" * I tried both. I pressed F2, I press F12 and no one bothers me pst screen

  -When I press on either after the Toshiba screen is visible, they do nothing
  -If I press "F2" at the start, upward, the instructions at the bottom of the page says "Please Wait". However, I waited for hours and nothing ever happened. The "Please wait" message just sitting there.
  -If I press F12 during startup, upwards, the instructions at the bottom of the page says "press F2 SETUP, Entering boot device selection menu... "Then he is there and does anything just
  The screen Toshiba Leading Innovation remains all the time.

  I have tried removeing the battery and draining flea power - this does not solve the problem.

  When I restart the laptop, I get the situation according to the line 1 above. No amount of tap F8 does nothing... I'm still back to the page of the main Innovation of Toshiba.

  The fan works, but the HARD disk led never sparkles.

  Any suggestions please? Thank you

  Hello

  If the laptop is unable to pass the home screen Toshiba (POST-puissance on self test) then this behavior of the laptop is mainly related to a serious hardware problem.

  The defective HARD drive would not cause such a problem, because even if the HARD drive is faulty, the laptop must be able to pass such screen...

  So I guess there is something wrong with the RAM or the motherboard.
  Here you can check how to remove the RAM modules and insert the new memory:
  http://APS2.toshiba-tro.de/KB0/CRU9902O80001R01.htm

  If the problem is not related to defective RAM, then other parts like the motherboard (maybe module BIOS EPROM) must be verified... but such verification requires additional special tools and that's why I think it would be a job for a laptop technicians...

• Re: Laptop screen went pink and white

  Help, half my laptop screen went pink and white! This means a new screen is necessary - its only 3 months.
  He began to blink, but is now permanently rose/stripey.

  Please don t waste your time here and contact the nearest Toshiba authorized service provider as soon as possible and let them repair your laptop.
  The guarantee is valid and repair will be free.

• Why the Satellite L300 laptop screen stays white?

  Why the Satellite L300 laptop screen stays white?

  Hello, I have a Toshiba Satellite L300-29U over purchase, turn when he was first an hour about it looks a whole without problems, then the screen was blank. Feed again in a couple of times more hours after rest and passes him still takes some time to operate.

  What is your recommendation?

  Thank you for your response.

  Post edited by: Sams

  Hello

  Why?
  Who knows what have you that your screen is white?
  My screen is not white it shows everything correctly.

  The same white screen will appear on the external monitor?
  If so, then this problem may be related to faulty graphics card, if no, your laptop computer s display can be defective

• Satellite C50D - Stuck on splash screen "Toshiba leading innovation.

  Hey I have a new laptop of Toshiba C50D-A satellite.

  When I start it it won t go Toshiba leading innovation > screen. I can access the start screen by pressing F12 and accesses the Setup utility by pressing f2.
  Someone has ideas of how to do to solve this problem? Or what's wrong with it

  Hello

  On this virtual path, it is not easy to say what the problem is here.
  Can enter you recover or repair options - http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm?
  If so try please use some repair options.

• Satellite A100-233 (PSAA8) and Toshiba Extended Tiles for Vista

  I have this laptop and installed Vista Ultimate on it. Where can I find the Toshiba Extended Tiles for Windows Mobility Center - there is not these tiles on the page with the drivers for this type of Toshiba laptop.
  Or they are not necessary for the A100-233?

  Hello

  These titles are not needed for best performance of Vista on the Satellite A100!

  All drivers and Toshiba Vista utilities available are on the European driver Toshiba page. If you're not than that of tiles on the Toshiba driver page, then this application is not available.

  But before you give you have to download the Package Toshiba Vista added value because this package contains several additional tools such as a utilities
  -TOSHIBA components common driver
  -TOSHIBA Power Saver
  -TOSHIBA Flash Cards
  -TOSHIBA PC Diagnostic tool

  Best regards

• laptop screen will not return to the only projector tv works

  I have a Toshiba laptop, watching a movie on my TV which is connected to my computer, but now my TV screen works and my laptop screen is dark and cannot be read. When I try and disconnect, my screen remains black, I turned my computer off several times to reset but nothing works, is there something else to do. Thank you.  Keith S.

  Hello

  It looks like there is a hardware problem so you should contact a real
  computer shop (the one that works internally on Toshiba) orToshiba support.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My laptop screen fades dying, a second screen plugged... but it displays as a part continues to right-hand side of the screen

  My laptop screen fades dying, connected a second monitor. I need to do (in display) do the pluged in the number one monitor.  Because it shows now it acts as an extension (on the right side of my screen.  My mouse pointer can migrate from one screen to the other and my start maing buttons that I don't see on my laptop screen.  What I really want is for the two monitors to show an identical copy of one.  Or at least put the plug in the monitor by default #1 and lapbopscreen #2 I hope that this will make sense I help eed before the screen of my laptop completely died please...

  Hi VictorReventlow,

  Try the following steps to extend the monitor on the second screen.

  1. In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to use in addition to your primary monitor.
  2. Click to select the checkbox extend my desktop on this monitor . After enabling this feature, you can drag items across your screen on alternative screens. Or, you can resize a window to stretch it on several monitors.

  For more information, see the articles below.

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx

• Impossible to define as 'Primary monitor' laptop screen

  I'm having a problem with a configuration dual monitor that does not allow me to change my laptop to the main screen and the external monitor as the secondary. Currently, my Samsung 245BW is automatically set on the screen by default whenever I connect it to my Toshiba Satellite via a VGA cable. When I go to the menu "Display settings", there "This is my main monitor" the box grayed out for the laptop screen... My in my laptop graphics card is an ATI Mobility Radeon HD 3470, if it matters. Thanks for any help.

  Scott

  All my drivers are up to date but I managed to do work the other day. I closed my laptop for a few minutes and when I went to open again as if by magic screens changed. Now my laptop screen is the default value. :)

• Touching laptop screen affects the connected monitor. I don't want that

  I have a monitor connected to my x230T do an extended desktop.  When I type on my laptop screen, it does not 'click' on this place, he clicks on a task on the monitor.  For example, if I tap the Start button on my laptop screen, the start menu does not open upward - instead, the left side of the bottom of the screen is clicked on.

  I want to touch on my laptop screen.  How can I fix it?

  You can setup the configuration under Systemmanagement-> Tablet-PC-configuration?

  There, you can choose which screen is the screen stylus and touchscreen.

• Can't get video back to s-video laptop screen.

  Hello.

  I tried to return my video output to the screen of the laptop LCD without result. Here is what happened:

  I wanted to view some AVI files that I have on my HARD drive on my TV screen, so I thought I could extend my Windows desktop on the screen of the TV. However, after you check the box «Extend my Windows...» "and by clicking on apply, the tick would disappear and there is no output to the TV. So I assumed that it wouldn't work. I then later tonight then turned off the laptop. Don't start the next morning, there was no video output on the LCD screen of the laptop! Remembering the day before sentencing, I thought that the release would now my TV screen. So I plugged the S-video cable and video in fact all was now going to my TV. So I imagined that do the opposite, extend my desktop to the laptop screen, could solve the problem. Yet once the tick would disappear when I clicked on apply. Since this is what happened the night before, I thought that a restart would fix it. After the reboot, the video was still running the S-video port. Now, I'm stumped! So I decided to connect an external VGA port monitor and enough curiously, video was present there as well. But I still could not extend my desktop to the internal lcd screen. By pressing FN + F8 to switch between CRT and LCD did not help either!

  Can you get it someone please let me know what I should do to fix the problem? I don't think that the LCD is dead because the reboot there is a small Flash of light on the screen lcd laptop but nothing else after that!

  Kind regards

  TK.

  
  

• wanted m6 sleekbook: How can I stop my laptop screen goes blank.

  My laptop screen keeps going blank. and sometimes I'm in the middle of something. the laptop keeps runing like nothing happened.

  Hello @Iggy6,

  It seems that you have a unwanted material.  You can contact HP telephone Support, for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• upgrade for HP probook 455 laptop screen full HD

  Hello
  
  I have a probook 455 and I wanted to know is there any screen full hd or hd + corresponding to this model?
  
  I think my lcd is like this:
  http://www.LaptopScreen.com/English/model/HP-Compaq/ProBook~455~G1 ~ (F2P93UT).
  
  and I read this link:
  http://h30434.www3.HP.com/T5/notebook-video-display-and-touch/HP-ProBook-4540s-upgrade-laptop-screen...
  
  I want to know if other hp LCDs or other brands can be used? Help me if you know the full hd or hd + lcd model.
  in fact, I am not satisfied with contrast of 455

  Yes and no.

  Not as long as the computer and the components are designed to best suite with eachother. So manufacturers will not support using incompatible parts if custamization is accepted.

  Yes because there are technicians who can mix and match components but the combination must look and regular maintenance. I would not advise this as it can be found in failutes and questions.

  Workaround would be to buy a monitor (ecternal) HD and plug it in. There are n number of options in the HD monitor of your choice.

• Qosmio G20-139: use the laptop screen to play on the Xbox 360

  Hi I have a question about the monitor function with the G20-139,

  I have an xbox 360 and would like to know if there is a way to use laptops screen to play on the 360 in high definition or composite mode using the monitor function. With the laptop came a composite cable at one end and a sort of headphone 3.5 mm at the other.

  I read the manual about the case and it does not work.

  Any help would be appreciated thanks

  Hello

  The port monitor - where you can connect with the composite cable can be used to display video from your digital camcorder, video game or VCR on the internal LCD screen. It can be used as a line-in port to allow the connection of a stereo device for audio input.

  In my opinion, you also need this cable to connect the Xbox to the Qosmio with composite cable plug-in software component.
  http://www.madcatz.com/default.asp?page=257&CategoryImg=Xbox_360_Cables

  Then to commence the Qosmio with the Monitor-in button that starts the Qosmio player.

  Good bye

• Windows XP Home edition does not charge up - screen Toshiba and then nothing

  I opened my computer to stand by earlier. And received an error message such as:

  WINDOWS CANNOT CONTINUE RUNNING BECAUSE THE FILE IS DAMAGED AND UNREADABLE...
  Then he had a countdown until it restarted. After the computer restarted (loads of screen toshiba upwards) then nothing happends. I managed to get into the safe mode start page, but when I select start in safe mode, it does nothing, actually freezes. Seems that the problem is with XP.

  I also tried to "last good configuration" but who also refuses to load.
  I can, however, in the BIOS.

  The black and white background writes startup screen that flashes briefly upward when after that the toshiba screen doesn't even come to the top.

  I have a P100-429 Satilite using XP SP2 (or 3) does not remember.

  Is this a hardware problem? I lose data?

  I am aware that my system was clean and I was using a good anti-virus.

  Please please let me know if you have any suggestions or comments.

  Thanks in advance, Max...

  Hi RisSsky,

  you are in a deep deep sh... t... No. not really...
  Looks like the filestructure hard disk is damaged.
  the hard drive is recognized by the bios? means, it is listed as a device?
  There is a sound of the hard drive? scratch or buzzing or ticking?

  CHKDSK may help, but I would 'safe mode' where you want not to lose data on disk.

  don't panik, we will do things.

  2 options to solve this problem:
  the first and save:
  -Remove the old hdd (you need later)
  -get a new hard drive and make a recovery/installation on the new drive.
  -also get a usb - hdd connector to access old data hdd and copy on the new disk.
  or the 2nd:
  -run chkdsk on your hard drive, maybe you need to do this with a "live-system-on-cd.
  Be aware that if there is a problem it will get worse...
  -start in safe mode

  If you're lucky, the 2nd option will do.
  as said before I'd do it "the safe way.