Satellite C50D - Stuck on splash screen "Toshiba leading innovation.

Similar Questions

• Satellite Pro P300 - 23L: can't get screen Toshiba Leading Innovation

  This is a cut and paste from a previous post, but the one I'm having a problem with today (save me typing again!):

  When I start my laptop, it stops on the first screen of the Toshiba innovation and only gives the opportunity to do two things. That's what he said to prevent the page * "Press F2 to enter Setup, F12 to access the selection of Multiboot Menu" * I tried both. I pressed F2, I press F12 and no one bothers me pst screen

  -When I press on either after the Toshiba screen is visible, they do nothing
  -If I press "F2" at the start, upward, the instructions at the bottom of the page says "Please Wait". However, I waited for hours and nothing ever happened. The "Please wait" message just sitting there.
  -If I press F12 during startup, upwards, the instructions at the bottom of the page says "press F2 SETUP, Entering boot device selection menu... "Then he is there and does anything just
  The screen Toshiba Leading Innovation remains all the time.

  I have tried removeing the battery and draining flea power - this does not solve the problem.

  When I restart the laptop, I get the situation according to the line 1 above. No amount of tap F8 does nothing... I'm still back to the page of the main Innovation of Toshiba.

  The fan works, but the HARD disk led never sparkles.

  Any suggestions please? Thank you

  Hello

  If the laptop is unable to pass the home screen Toshiba (POST-puissance on self test) then this behavior of the laptop is mainly related to a serious hardware problem.

  The defective HARD drive would not cause such a problem, because even if the HARD drive is faulty, the laptop must be able to pass such screen...

  So I guess there is something wrong with the RAM or the motherboard.
  Here you can check how to remove the RAM modules and insert the new memory:
  http://APS2.toshiba-tro.de/KB0/CRU9902O80001R01.htm

  If the problem is not related to defective RAM, then other parts like the motherboard (maybe module BIOS EPROM) must be verified... but such verification requires additional special tools and that's why I think it would be a job for a laptop technicians...

• Satellite L300D 242 hangs on the TOSHIBA Leading Innovation page

  Hello

  When I turn it on the laptop crashes: press F2 go to the configuration utility, F12 to start the Manager of... of which work niether
  The screen is a black background with TOSHIBA Leading Innovation > about this

  After a few minutes, it goes away leaving me with a black screen with nothing on it, as if it was in mode 'sleep' I think that
  But I can't seem to go as a result of check or search for anything, not even to restore the system.

  Model is a 4 months of ideas please before considering back under warranty... it could be something simple I'm just missing

  BTW not very comp savy

  Thanks Isabelle

  Hi Isabelle,.
  Looks like a hdd dead to me...

  If the warranty is still valid go and see a servicepartner...

• The computer hangs at the screen Toshiba Leading Innovation

  Hi all

  My Toshiba Satellite P300 has suddenly stopped working. I was burning a music disc and the computer froze, tried to exit the program using the Manager of tasks successfully. I rebooted the laptop to refresh all before trying to burn again. the computer rebooted and hung to the inovation driving, Toshiba screen at the base of the screen it says press F2 to enter setup, press F12 to access the selection multiboot menu.

  By pressing one of theses buttons does nothing, I also tried to enter the recovery now the 0 key, and C key with the disc, but still nothing happens.

  Anyone with any ideas please, I don't have problems or signs of problems until this happened.

  Concerning
  Adam

  I had similar problem on my old A200. After removing the HARD drive, I was able to enter the BIOS settings.
  I replaced the HARD drive with a new one and now it works perfectly.

  Try to do the same thing. Remove the HARD disk, restart the laptop, just to see if you will be able to enter the BIOS.

• Satellite U940 - 10 c freeze after show "Toshiba leading innovation.

  Good afternoon.

  My U940 stucks in the screen "Toshiba leading innovation" and it is impossible to get to the BIOS (F2 or F12). I tried unplugging all the memories (RAM, SSD, HARD drive) and the main battery; but it was useless.

  Any ideas?
  Thanks in advance!

  In my opinion, your motherboard is affected.
  I'm not quite sure what part of the motherboard could cause such problems, but in my personal opinion that replacement motherboard could help you to fix this m

• Satellite Pro S500 - Freezed at Toshiba leading innovation frontpage

  Hello

  My new Satellite Pro S500, age: 2 hours have just made the 'start-up' and installed all the drivers. My first step was to spend + updated windows + and update various security patches, etc. Windows identified 74 updates - and let the laptop do the download. He installed about 15% and restarted automatically. The laptop started upwards, installed about 30% and restarted.

  Now, the laptop has * freezed * on the first page of "Toshiba - Leading Innovation". If I try to power off the laptop computer he turns to fashion - watch and go back to the page of "Toshiba" once again.

  Any ideas of how out of this loop?

  Thanks in advance
  B

  Hey,.

  And have you ever tried to remove the battery and the AC/DC adapter? Try this and leave both disconnected for at least an hour.

  Then install the battery and plug in the AC adapter and try restarting your laptop. T he past the BIOS Toshiba screen now?

• Satellite A100-906 - gel @ Toshiba Leading Innovation

  Hi all

  All the world is facing a problem where the laptop freezes on Toshiba Leading Innovation. The weird part is that, when you connect the laptop to an external monitor, everything works well.
  I tried to replace the LCD, Inverter, cable LCD and VGA (its Nvidia 256) and still the same problem.
  Updated the bios to version 6.0 always the same. Read in some forum that downgrading to version 5.90 will solve so made but still the same thing.

  I don't know if it has nothing to do with the error of TPM secure that I get. When I turn on the laptop and you press ESC before it freezes, after memory check it says that "no TPM or TPM has problem" (note that this error even when you plug in an external monitor but on external everything works fine. and after loading windows if you switch the monitor to the portable computer LCD laptop works very well without any problem)

  I check in the Bios, TPM option is greyed out then you cannot activate or disable it from BIOS.

  Hello

  I think it s a hardware problem seriously looks like the motherboard could be assigned to all ports (VGA port as well) are part of the motherboard.
  It s very strange that the laptop could start only if the external monitor is connected, but in my opinion, this can be only a related problem of the motherboard
  I have no other explanation

  Sorry mate for this General info, but that's all I can suggest to the present case

• Satellite C50D does not (black screen)

  Hello

  I have a problem with a Satellite C50D-A-133 which does not (rest on the black screen).
  I tried the reset procedure and I replaced the RAM without success.

  Has anyone had this problem?

  Thank you in advance.

  PS: for information, if someone reads Toshiba does not have this message, the french support site (redirects to the homepage when you enter the serial number or by selecting the model in the list).

  By reset procedure do you mean remove the battery and by pressing and holding the long power 30 dry?
  It is the common procedure in case the laptop doesn't wake up no more.
  But of course this will help in case of a hardware problem.

  It would also be possible that corrupted BIOS CMOS data prevents the machine to start. This can happen in case of module of the BIOS EPROM, but this should be verified by the authorized service provider

  As you can see, it's really not very easy to say what could be wrong here

• x 305-q706 Stuck on splash screen where is says "Qosmio" with please wait...

  Hello

  recently purchased a Qosmio x 305-Q706. First time I booted up it gets to start with Qosmio screen displays with "please wait" down and hangs there forever. The only way I can get it to boot is to start cold and purée the key F12 for is loading from the startup screen, if I'm lucky, I can enter the option where you can choose which startup device, and if I manually chose the hard drive I can load windows.

  Someone at - he heard of this problem or how to fix it? I tried to change settings in the BIOS nothing. Re-iterate, it is stuck on the screen with Qosmio pslash, and if I press a key on the keyboard once it says "Please wait...". "he brings me just to the bios: (.)

  Any help would be appreciated.

  Hello

  This is a very stupid situation and I really don't understand why the laptop hangs at this level to start.
  Is somehow your Qosmio confused and cannot decide which device should be the first boot device.
  What is some external device connected to your Qosmio laptop?

  Maybe update the BIOS can help, but if you have all new laptop is not the solution. This is more recent laptop, and I presume that there latest version of the BIOS. So, if I were you I would contact either your dealer and ask for replacement or Toshiba service directly. This behavior is certainly not strange and laptop crashes somehow on the BIOS/POST (Power-On-Self-Test).

• PRE down and now stuck at splash screen - HELP!

  I was working on a small project (5 min) a couple of soundtracks and was going from one to the other location and crashed BEFORE - now when I open the program to the top of the start screen is blurry and I can't choose anything except the 8.01 update and stuff - HELP - project in 4 hours!

  Eric

  Based on a test drive, it's what I think got into the mix. I'm not sure of all the twists and turns, but maybe you can help me fit things together better once you read what follows:

  1. your first Elements 8.0.1 project.prel crashed.

  2. you reopened the first Elements 8.0.1 since the desktop icon which targeted the Adobe Premiere Elements 8.0.exe which opens the Premiere Elements welcome screen (aka Splash Screen). The program is stuck on the Welcome screen. You say that you have completed the process using the task/process manager.

  3. you then went to Program Files/Adobe/Premiere Elements 8.0 and clicked on the file Adobe Premiere Elements.exe to open Premiere Elements. Using this .exe to open the first Elements allows to bypass the Welcome screen (less process involved in loading or opening). Until I tried this I thought not possible: you can open Premiere Elements 8.0.1 via Adobe Premiere Elements 8.0.exe and bring it to the Welcome screen and then click Adobe Premiere Elements.exe in the Program Files folder and the program to open completely. If you find yourself with two instances of open Premiere Elements.

  4. If you tell me that you still have the original Premiere Elements stuck on the Welcome screen, so I let myself believe that you did not really close it with Task Manager/processes.

  5. return to the Task Manager/processes and search for more than one instance of «Adobe Premiere él...» "in the process list. Complete the process for both.

  6. then create a shortcut on the desktop of Adobe first Elements.exe and use instead of the original desktop icon which targets Adobe Premiere Elements 8.0.exe which includes the opening Welcome screen.

  RTA

• Lenovo Vibe Z2 Pro stuck at splash screen

  Hello

  I have the Vibe Z2 Pro and have the version of LINE of 271. Today, I got the OTA update message and tried to install the S277 update. But I wasn't able to do. So I phone reset and now phone is not booting. It stucks at Lenovo screen logo and nothing happens. I did the factory also resent by presseing low volume + powere but no help.

  Please help me to restore the phone. As in samsung phones, there are mode of odin. Is something like this for lenovo. ??

  Earlier, I rooted my phone and installed TWRP recovery. Then S277 update I removed the roots and tried to install the udate, but it failed. Please help me.

  Kind regards

  Mandar

  Hi guys,.

  I have soved that problem using Qualcomm Flash image program loader (QIFL). Its pretty simple. I had the original ROM and follow-up instruction as per

  http://www.androidbrick.com/ultimate-Qualcomm-Snapdragon-unbrick-guide-Snapdragons-are-unbrickable-q...

  This guide is the base LINE for K920

  I got my phone revives and then updated to the latest version of the LINE-S277. No problems atall.

  Hope it helps you too.

  Kind regards

  Mandar

• Stuck at splash screen!

  IM using a probook 4530 s. It worked fine a few hours ago, until now. It gets stuck to the screen... with nothing else than the "windows 7 Home premium' down... It usually takes about 10 seconds after that. The pointer still works and I can activate the caps lock. His work also normally in SafeMode... so what exactly should I do?

  Hello

  Start the computer in Mode without failure.  When it has loaded, on the Start Menu, click principally made programs, accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issuance and then proceed to the restoration.  When you're done, see if Windows will restart normally.

  Kind regards

  DP - K

• Satellite T130 - stuck on the initial Toshiba screen (Bios)

  Hello

  I got a T130 and recently tried to start with a key USB - but I have not even that far--basically since trying to press F12 to access the boot options it will not go passed the initial Toshiba screen.

  I tried to turn off, remove the battery/AC etc. When you press F2 it said entering the facility, but nothing has happened - I also replaced RAM memory modules.

  Any ideas?

  Thank you

  Maybe the BIOS is screwed up. I mean that if you are not able to enter, it may be BIOS problem.
  You have defective or what?

• NetBook NB100: Black screen after Toshiba leading innovation

  It occurs something strange with my N-100 Netbook.

  It has always worked perfectly, but today, when I try to initiate, it appears on-screen typical 'Innovation leader Toshiba', but then the screen goes black, and do not appear "windows". I hear a sort of high-pitched noise inside your computer.

  I'm not exactly good computers and I tried pressing F2 and look at the different options, but none of them was not like the solution, and I'm afraid I can ruin my computer (I mean, even more) with my computer ignorance.

  Did someone knows what can happen? I'm completely hopeless!

  now fix this = solve my life XD
  Thank you very much!
  Gracies!

  Hello

  Are you able to press F8 while the laptop is turned on?
  To do this and check if you can choose the option repair my computer, then the HARD drive recovery.

  You should also check the BIOS.
  Immediately after pressing the power button, press F2. This allows you to access the BIOS. You can then check if the HARD drive is recognized.

  Sorry mate but it of difficult to say what's wrong here

• Tecra A9 stuck on splash screen

  Hello

  I'm new to your forum, and I hope to find help.

  I have a Toshiba Tecra A9 stuck on the boot screen after my intervention in the bios to boot from a USB key.

  _DETAILS: _
  At first, it turns more on the home screen with the symbol choice 5 (hard drive, USB, etc.).
  By clicking on a symbol and nothing is unresponsive I can't enter the bios.
  It is displayed at the top of the screen: In Touch With tomorrow TOSHIBA and five symbols.

  I unplugged the two small green battery on the motherboard for 10 minutes, but nothing has changed.
  That said, I do not know if I unplugged the battery well (y ' have it two?).
  It would also make a metal button on the motherboard battery?

  Thanks in advance for your help.

  Alain

  I don't have this model of laptop, but can you please tell me what happen when you use F12 at startup?
  Start menu is available?
  If so, can you choose HARD drive as a boot device?

  I do not understand why you can not enter the BIOS settings? Have you tried F2 at startup?