laptop starts momentarily and stops

Similar Questions

• Why has my laptop started to randomly stop before turning off

  Original title: computer power questions

  Why has my laptop started to randomly stop before turning off? I had no problem with this computer at all for more than a year. I tried to run all the updates available, but of course, it turned off before she finished. Sometimes it will run fine then others that it is a nightmare. can anyone help please? I would be very happy to help!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need the help of a
  real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
  Support from the manufacturer.

  ===========================================================

  Check with these utilities to see if information may be collected: BlueScreenView run to see if
  There were some BlueScreens and MyEventViewer at the time, check if the stop (or a little
  seconds before) see the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  =========================================
  =========================================

  More if needed and you think that the closure could related to the Options of food or sleep.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How do you computer when you start upwards and stops

  How do you computer when you start upwards and stops?

  Hello

  1. You use any meaningful application in your system?
  2. Are you facing any problem sound in the computer or speaker?
  3. To better help you, let me know the brief description of the problem.
  4. Do you get audio startup in Windows?

  If you are facing problems of sound in the computer, see the link below:

  The startup sound is not played correctly when you start Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/321735

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-sound-problems

  It will be useful.

• Satellite C660 - 2d 7 continuous fan start-up and stop - is this normal?

  Hello! I have a 'newbie' question, if anyone can help, I would be very grateful :)

  I got a refurbished c660 - 2d 7 Currys yesterday and the fan will continue turning and stopping. Usually too much worry (it's not particularly strong or whatever it is), but as it's a refurb. and I don't know what he was returned for before, I want to make sure it's healthy! It does not warm at all, it is stone-cold to the touch and I don't do anything too tender (a couple of tabs open in google chrome and sometimes a solitaire game), but maybe that's not hot because the fan does its job, hehe! It gives a little quiet snoring then stops every few minutes, what is normal and OK?

  This is my first time owning a computer windows laptop and from what I've seen other people, the fan is usually noisy or not altogether (will not compare to the MacBook since they like mini cookers and little need to operate the fan at the maximum all the time), so I wondered if he was trying to start the fan/fans maximum and default? Is there a utility on it anywhere which will check if the fans are okay? (It came with many Toshiba apps, they have not checked this yet).

  If this is normal, and they do that, that's fine, I just want to fix it as soon as possible if she is sick or must replace fan/fans. Thanks for any advice you can give!

  Edit: Also the hard disk is divided into two equal partitions, is it possible to cancel this easily? It seems unnecessary to have shared it this way when he uses only 8 GB for data recovery!

  Post edited by: idleRAT

  null

  Hello

  Yes, it's nothing unusual, that the fan continues to go if a certain level of temperature was approached.
  Alternatively, you can control this behavior a little fan.

  You can change the power of Win 7 to friendly State management settings battery.
  In this case the CPU wouldn't create too much heat, and cooling modules would not go too often.

• My laptop heats up and stops

  I bought my laptop in the United States and use the same card. Perhaps that is the reason, but I'm worried seriosly as my mobile after an hour of use would become very hot and stops. I don't know what the problem really is, but lately it seems to stop even quickly.

  I thought the fans might not work, but they were when watching them. He came from the all-new, and I used it like that for six months now. But as the problem became worse, I thought to ask for help here. Is there something I can do?

  Thank you.

  HI Shalav,

  Your laptop will most likely use a 'universal' adapter so it does not work perfectly well in the United Kingdom as well as in the United States.

  Your problem is more likely to be an accumulation of dust in the CPU-heatsink that will reduce its effectiveness to the point where heat build-up causes the thermal protection circuit to opertae and cut the power.

  Clean any buildup of dust and also ensure that there is sufficient air to circulate through the cooling system. Leave many spoace around and under your laptop.

  Kind regards

• my laptop starts ok and runs OK for about 20 minutes. Then I lose the picture and the screen shows multicolored lines after the screen turns off. Have no option but turn off...

  I have no choice, but to turn off when I next starts, the system works for 15/20 minutes and then the problem comes back I'm back able to boot and run for 15-20 minutes before the problem. What can be wrong?

  Hello

  It's graphic (corrupted graphics drivers or graphics hardware fault), or an overheatring problem.

  1. go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or the drivers of the Chipset and download and install.

  If the problem does not have the graphic material.

  2. overheating (normally will stop completely):

  The vents of your laptop becomes clogged with dust, fur, hair, etc.

  You can buy cans of compressed air to clean.

  If that complies, you may consider a repair shop in order to open the laptop and clean the inside of it.

  Also do not use a laptop when it is based on blankets, bedspreads.

  As you can see there may be two reasons for your problem

  See you soon.

• Machine starts beeping and stops...

  My friend just put a Corsair 850 watt power supply in his P6404y machine and tried to stock update the 9100 Nvidia graphics card to an Nvidia GTX 460 and the machine would be fine, however when he tried to play games the machine would beep and closed which is usually a symptom of a GPU overheat condition.  He then returned the GTX460 and upgraded to a PNY GTX 470 thinking his first card was a supplier without a name and the same problem occurs.   He then put a big fan next to his computer with the side and if the machine starts to beep it makes and may continue to operate, but I told him that option is not recommended.   There is nothing in the Bios to see what the parameters are for the monitoring of heat on a GPU and there is no newspaper generated indicating what the cause of the stop is.   We looked online for help and there is none available for mother Pegatron m2n78 - made by Asus for HP.   Is there a software that allows to monitor and change settings for the beaches of heat on a GPU, or y at - it another way to identify which monitors the machine for the heat so we can try to solve this problem.   The bios options are very limited and we are really stuck on this one.   Help, please!   Thank you

  Chuck

  OK, we believe that we have solved the problem!   Even with the upgrade of the energy supply, the issue seems to be with the current Nvidia cards.   Under site Web CPUReview, they show the max of each graphics chip power draw.   Looks like the Nvidia GTX 460 drew 160 watts and the next card, we tried the Nvidia GTX 470 drew 170 watts maximum.    We tried and tried and failed to get the system working.    Now, a few months later, we were given another chance and used a card Geforce 9700 GS PCI-E and it works beautifully.   The card has not been fast enough, but he had only a maximum current of 82 watts.   Makes us think it was the fact that the GS 9700 uses DDR3 and recent Nvidia cards use DDR5, but after checking, we found that had nothing to do with the problem.   Then plunges us into the issue of tension and grabbed a new ATI Radeon HD 5450, who also ran fine and has a maximum circulation of power of 20 watts.   The map was underpowered for 3D graphics, so we then made a leap up to an ATI Radeon HD 6770 and again once it has worked very well to 108 watts.   Do not forget that we were back all our previous equipment, but we got a Thermaltake 500 watt power supply available, so we had already put in the machine that we thought that the stock of 300 watt power supply was a nameless, low power unit.   So far, he played several games at speed without any problems.   Our last thought is that the Pegatron m2n78 - the motherboard don't like prints of the power of the latest Nvidia cards.    I hope that helps you people!  Wooohoo! OK, it's game time!

• Acer TimelineU M5 - 481 T - 6642 Ultrabook of 14 inches. CD/DVD tray when it starts up and stop noise?

  I recently bought an Acer TimelineU M5 - 481 T-6642 14 inch Ultrabook.  During startup and shutdown, there is the CD/DVD tray noise as if the status bar is trying to open. I did not a CD or a DVD in the tray again.  How can I stop this sound action, annoying in my new ultrabook?  Thank you.

  Mine makes no noise noticeable at startup or another so I would get the extract.

• Printer all-in-one HP D110a: printer will not end the print job. Starts printing and stop printing.

  Displays only a portion of the document.

  I opened the document, and when I ask 'print', the printer stops printing before finishing all of the print document.  I tested also try to print an e-mail to ensure that it was not the document I was trying to print and email would do the same.  Would only print parts of the email too.

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• When I stream video on my laptop it stutters and stops, I have tried everything I can think of, any suggestons?

  Sometimes I get a notice that cell share the I.P. number with another computer on the net work but I changed the I.P. number nothing works. I'm stumped on this one.

  Hey Stan,

  1. What is the operating system installed on your computer?

  2. this happens with all sites or with any specific Web site?

  3. which web browser you are using?

  4 have had any changes made to the computer before the show?

  If you use Internet Explorer, please follow the steps from the link and check that it works very well.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294/en-us

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• DAQmx: set up a digital acquisition continues with start and stop trigger

  Hi all

  I write because I can not find a solution to my problem.

  As written in the title, I just want to do an continuous (continuous sampling) a digital line. The fact that it's a digital line instead of an analog is no big deal, I guess. I want to start the acquisition on a rising edge of digital trigger (PFI0 for example) and stop acquisition on a trigger too (forehead down on the same signal (PFI0 even then) or a new front amount). This way I could precisely control the time of acquisition or of the start or stop other devices.

  Since this is a digital acquisition, you need to do first "something": create a fictitious analog input task and get the clock back to the digital input. I setting this analogue of the task to start on a trigger. It works but I can't find a way to stop it on another trigger.

  Do u hav no idea how to implement it?

  Finally I have not found an easy way to break cautiously the VI to wait for a trigger (in case you want to start an acquisition with different settings for example). Do you use the task to Abort or is it better to set a deadline to playback digital channel VI until the outbreak occurs?

  Any help would be appreciated!

  Thank you

  Config: LV 2010, latest version Daqmx and USB card or 6251.

  Hi Chris,

  One way is to use counters as Kevin described. For me, it's usually easier to create the dummy task that has the timing engine (as I HAVE), but it depends on what resource you have on your board you will not need .

  In fact, the example is the same thing that you need to measure continues - just what you need to do is remove the counter part and replace the trigger reference to be external (your stop trigger).

  with this approach, you should be able to do the continuous measurement - I noticed that you need DI - in fact with few changes you should be able to use this example. DI does not have its own timing engine, that's why you should use the external sample clock. If we use the example to create dummy HAVE to provide the sample clock, and we start DI task until we start to HAVE fake, then we can get pretty much continuous clock which begins start trigger and stop the trigger of reference.

  Take a look in the change - once again, I have not tested, but logic seems to be OK.

  

  with sincere friendships.

  s9ali

• Creating a rule entry time custom to read the start time and the stop as entry time

  Hello world
  
  I hope this is the right forum to post this question.
  We are putting in place the time and work package, and we need to write a few rules of the time for this entry.
  
  The first of them is to have a rule that validates the start time and the stop time has entered the entry-level feature Self Service scorecard.
  So, I created a formula to achieve this objective. This formula eventually calls a PL/SQL function that checks for card points, the Start and Stop time values stored in the database.
  
  However, this is not what I intend to achieve. What I have to do is to get the value of time as she walked and apply the Validation
  
  This expansion in a scenario:
  
  1. the employee connects via the Self Service and access the timesheet feature to make a time entry
  2. on August 20, he entered 13:00 as the start time and stop time 20:00
  3. click on the button
  
  When he clicks on the button Save, (assume 20:00 is an incorrect time), an error message should be displayed to the user informing him of this
  
  ----------------
  Now, I have to spend the early hour 13:00 and the 20:00 in the formula stop time so that I can post it.
  This is where I run on issues that I don't know how to get these start and stop within the formula time
  
  Grateful if someone could help with this.
  It's quite urgent given the lead times for completion on that.
  
  Thks in advance folks
  Ravi

  l_timecard_info: = hxc_self_service_time_deposit.get_building_blocks;
  l_building_block_attr_info: = hxc_self_service_time_deposit.get_block_attributes;

  However, I do not understand this:
  If there are no parameters that are passed to these calls, then how the correct score card to be recognizable? I'm assuming that there is something like a Timecard_Id or setting Timecard_Ovn that allows to identify the correct sheet when reading this info.

  Pls advise me on this point, because I'm just not understand this bit.

  You do not need to pass all parameters. The overall picture of pl/sql is filled for the session before the rule of time entry. If you want to restrict, the formula will be an id_ressource of entry which is an employee self-service Person_Id. and compare this value against id_ressource in l_timecard_info.resource_id

  If this isn't an inconvenience for you, I want to understand how these function calls to keep the start time and stop time, and to access these variables, I would need to loop as a table through?

  The l_time_card_info of pl/sql table is filled exactly the same as how is stored in HXC_TIME_BUILDING_BLOCKS when save is saved / submitted. It's just that the pl/sql is here filled.

• Satellite Pro A300D down hot and stops shortly after. Help!

  Hello together,

  3 weeks ago, I bought the Satellite Pro A300D laptop. Since the beginning, I have the problem that the laptop gets hot and stops less than an hour!

  I'm not running any application of high performance and I keep the left side of the free laptop so that the hot air can get away! I already cleaned the heatpipe using a vacuum cleaner.
  It could not be! I need the laptop for work and that it is impossible...
  What can I do? Should I send him?
  Help, I'm grateful

  Frank

  Post edited by: DerVogel

  There could still be dust stuck in the radiator, but you say that its only 3 weeks to dust is unlikely.

  Its under warranty, so take it to a Service Center for repair. This may have the thermal grease refreshed or something.

• MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING

  MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING

  It seems that the laptop may be overheating.  Are you sure there is enough air past for laptop?  Make sure that it is on a flat surface, with nothing to obstruct the ventilation openings.  Make sure that the vents and fans and heat sinks are free from dust - examine their blowing with compressed air (power of the system first, of course).  Depending on the laptop model, it may be relatively easy to blow off the dust with compressed air, or otherwise clean up things a bit.   Fans should be kept up well - only no right turn when being ripped off.  My Dell laptop has a removable fan (two small screws need to be removed) that can easily be blown.  This also allows access to the fins of the heatsink.

  Some laptops also have a removable filter that traps the dust and must be regularly inspected and cleaned.

  Are all the BIOS settings for the adjustment of the temperature, the value lower than the manufacturer's recommendations and the default values (you need to check the manual of your laptop for this).  Also make sure you run the latest version of BIOS (again, the manual of your laptop would have the details; the manufacturer's website should also have this information).

• Satellite M40 - start and stop issue

  Hello

  I have a problem with my laptop Satellite M40 on stop to the low process sometimes also on windows start and I think it's BIOS associates.

  When I start my laptop, sometimes (not always) I get an error message in a blue screen saying that my BIOS is not fully ACPI-compatible... I reboot, and if I wait a while, the system boots normally, but if I just restart immediately, he'll get the same message.
  It happens sometimes that the computer goes further opening in the black screen message: contact tomorrow: toshiba

  The other problem, I don't know if it of related or not, is that the computer is not shut down or restart. I have to do it by pressing the button for a while. I thought it was an application that I had in my system that was the cause, but I have just formatted the hard drive and the same mistakes are still ongoing...

  When it stops, it stops right on the message: 'Windows is shutting down... ". »

  I updated my BIOS with the new available for download here to toshiba support, and I think it was the trigger for all these problems... now I don't know how to go back, or even if it's the reason.
  I really hope someone here can help me, because I just wanted all the information related to the internet without success.

  Thank you!

  Hello

  Satellite M40 is well-known for me because one of my friends has one at home. Laptop very nice.

  So, what can I say? It's really not easy to say what the problem is here, but if you use Windows XP Home edition for a long time, it can happen that one day to happen strange things. I believe that no one here can say with certainty what the problem with your machine.

  If possible, you should clean OS installation using recovery media delivered. After doing this, you should see what is happening. In this case, no one can say that there are programs that have bad influence on the execution of the operating system.