MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING

Similar Questions

• HP: Laptop randomly stops when it hits 15%

  He started only today. My laptop would randomly just turned off when the battery was low. When I checked the percentage it shows 15% when I turn on my laptop. I already checked power options, and everything is normal. I was wondering if anyone has solutions to this. In addition, I notice just that my phone would not charge from 90 percent. It would charge up to 90%. Thanks in advance.

  Hi @davevidduong,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that your laptop randomly stops when the battery is low. It will be a pleasure to help you here.

  A remarkable work has been done by checking the power options. You did awesome troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  For clarity, I would need more information to help you best.

  Please let me know the product # computer.

  Have you checked if it stops when the charger is connected?

  This could be a hardware problem with the battery and we need to insulate it properly. In the meantime, please try a hard reset first. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back.

  Then visit this link to update the bios and HP support assistant. Link: http://hp.com/drivers please select the country and follow the on-screen instructions. Once this please visit this link to run hardware diagnostics on the battery and other components. Link: http://support.hp.com/in-en/document/c03467259 if please run full diagnostics and note any failure code if a component fails. Mainly to run diagnostics on the battery. According to the information that you could later calibrate the battery.

  I really hope things the excellent work and the problem is solved without hassle. I hope this helps. Please let me know how it goes. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Take care now and have a week coming Holy.

• TX2 (1375dx) - randomly stops when a/c cable disconnected - help?

  at home, I always leave my tx2 plugged into the charger a/c, and it is almost always in standby mode. When I take it on the road for work, I of course unplug and take with me (always in standby mode). When I get a job, I'm going to turn it back on (out of the standby mode), and it is sometimes completely closed / power off. before that, he makes 1 rapid beeping.

  in December 2010 I buy this replacement battery for it (not sure if this is a battery HP or not...)  http://www.buy.com/prod/new-laptop-battery-for-HP-TouchSmart-TX2-1375dx-TouchSmart-TX2-1377nr/q/loc/...

  I ask you all for advice on what the problem might be for this random closed. any ideas how I can fix this problem?

  If I can't, I will seek in the purchase of a replacement ASAP Fujitsu Tablet

  TX - art

  sell, good to be back in a Fujitsu tablet wacom is the way to go.

  put this tx2 on eBay soon huh.

• I have a laptop of hp 2000-417nr and have the time, it won't let me on the Web sites I do

  I have a laptop of hp 2000-417nr and have the time, it won't let me on the Web sites I do

  Hello

  the part where it says reset Internet Explorer try in the first link... If that doesn't work, try installing mozila Firefox from Google and ultimately what it will ask you to export the settings of Internet Explorer say no to that.

• update my Photoshop cc through my creative cloud and now takes more time to open the psb files that yesterday were beautiful, moving same layers autour, I now get the beachball! any suggestions?

  update my Photoshop cc through my creative cloud and now takes more time to open the psb files that yesterday were beautiful, moving same layers autour, I now get the beachball! any suggestions?

  Perhaps a preferences Reset could fix.  Cmd k will lead you to the Photoshop preferences where you will see this screen.

  

• NewElementInHierarchy() - adding new items, gradually takes more time when adding several brothers and sisters

  With my script ESTK, users select the model numbers in the list and then the script inserts an element with a model number is entered in an attribute, an element for each selected model.

  When you add a large number of elements, each element of extra brother takes a little more then the previous item adds. Adding 250 items may take longer than 3-1/2 minutes or more. During the addition of 20, 50 or 75 items happens quickly, without any noticeable length. It is somewhere in the top 110, this is where that starts to get noticed.

  I even used $.hiresTimer and writes the value to the console for each time a model has been added. Because the timer is reset to zero (0) whenever it is called, it was easier to notice than the amount that it incremented from one element to the other got progressively bigger.

  Any ideas as to why it takes so long or reflections on what I could do to speed it up?

  The structure looks like this:

  < PartModels >
  Text < NoteText > < / NoteText >
  < model ModelNumber = "ABC01" / >
  < model ModelNumber = "ABC02" / >
  < model ModelNumber = "DEF03" / >
  < model ModelNumber = "DEF04" / >
  …
  …
  < model ModelNumber = 'XYZ01-A' / >
  < model ModelNumber = "XYZ * B" / >
  < model ModelNumber = "XYZ500" / >
  < / PartModels >

  The script is quite simple: scroll a selected model numbers table, add a new item for each model number and value of the attribute, the value of the model number. It's the short version:

  Function InsertModelElements (modelsToIns, insElemLoc, GVdoc) {}

  var newEleId;

  var newElemLoc = insElemLoc;

  var elemDef is GVdoc.GetNamedElementDef ("Model");.

  for (var i = 0; i < modelsToIns.length; i ++) { / / modelsToIns is the selected model range }

  newEleId = elemDef.NewElementInHierarchy (newElemLoc); //ElementLoc based on NoteText first, last, or absent

  SetAttribute (newEleId, "ModelNumber", null, modelsToIns [i]); //More feature robust to set the attribute
  

  / * Which also works for the layout attribute * /.

  var vattributes = newEleId.GetAttributes ();

  vattributes values [0] [0] = modelsToIns [i];

  newEleId.Attributes = vattributes;

  
  

  / * At one point, I tried to use a new location of the item to the last inserted element, no change * /.

  var newElemRange = setElementSelection (GV_doc, EleId); function that returns the range

  newElemLoc = newNewElemRange.end;

  }

  }

  Any help is appreciated.

  Sincerely,

  Trent

  Thanks Russ,

  I seriously considered trying to copy/paste and started to change the code to do it. But I could not let pass, the answer should be right there in front of me, it's all too long that I worked with this stuff, I am not able to see. Then it dawned on me what's happening.

  In a previous test, I put a timer on each action that is closed. For example, I start with a container element that has 200 children of elements, each with a specific/unique model number attribute. All the 200 existing items are deleted and then replaced with 250 new items with a different value for the attribute of model number. The timer was placed after the Element.Delete () and ElementDef.NewElementInHierarchy () methods. What I've noticed with the timer, it's that each deleted item has been removed as fast as the previous item (so it took progressively less and less time to remove an item). And of course the opposite was noted for insert items, each inserted item has taken longer than the previous inserted item.

  These elements can be inserted in two areas of the structure, one of the neighborhoods within format rules that affect the formatting and is actually a bit faster. This led me to the cause being ESD format rules. The area that takes more time has quite a few rules of extensible format that apply. Whenever an element is inserted or deleted, FrameMaker through these rules for formatting the content of elements. Given that the rules apply to the parent, first, last, next, previous, etc., FrameMaker must apply the rules of the format to all elements of the structure that the rules (which are extremely complex due to various elements, attribute values, and combinations that can be inserted).

  Removal or thinning of the FormatRules in ESD, she becomes faster. But each of the FormatRules are needed. So using app. ApplyFormatRules = false; just before that the elements are deleted and inserted works very well. But the key is to implement ApplyFormatRules return to true before remove the last element should be removed and before inserting the last element to be inserted, so it allows to scroll all the rules of format of ESD for all elements in the hierarchy of these format rules apply to. ApplyFormatRules true and assign the ElementDef until the last item works also [EleId.ElementDef = GV_doc. GetNamedElementDef (insElemType);], but only before all the other functions are performed or different items are added.

  doc. Reformat() will not reformat the content correctly after the fact, because the element has been created without the format rules, so it reformats all the contents of the elements without the format rules.

  The FDK version which was created 10 years ago had the same problem of slow operation when a large number of items have been inserted, but was still an improvement over having manually insert each item, and then type the value of the attribute, if she had lived with.

  He now works surprisingly fast. I hope that my explanation of what I think is happening, including the cause/solution, is understandable.

  Sincerely,

  Trent Schwartz

• Backup my operating system Vista (shipped on a sony Vaio) laptop so I can reformat and reinstall the operating system

  PC is a Sony Vaio VGN-CR353 under Vista SP2,

  Noted several windows applications does not always work and have not, bug where adobe acrobat reader files won't open

  Unable to solve if prefer to reinstall the OS if Possible

  Hello Lena fair Juliet,.

  Thank you for your message.  This should not be a problem, however, you will need to check with Sony to get recovery discs if you don't have them.  Otherwise, remember to back up all your important data, and then you can repair or reinstall.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My iPhone battery 6 runs very fast and when I load it, it takes more time than usual and overheating

  It all started when I was playing a game my it froze just in case and he would not unfeeze. So after waiting for 6 minutes I hard rebooted my iPhone 6 and 5 minutes later, this problem occurred.

  You are probably games power absorbing with other applications running in the background.   Temporarily disable apps without importance and limit the time you play, at least those power absorbing.

• laptop Windows 7 keeps stopping when she needs to sleep (no virus found nowhere) ideas?

  laptop of 2010, when closed, will stop. When I close my laptop it should go to sleep after a few seconds, but 4-5 weeks ago it began to restart instead, randomly... So when I open it I get a notice of "unexpected stop. There is a bubble (MS) asking you to find remedies that shows progress for about 5 seconds and then disappears. I actually don't lose any info but my concern is that it's something with my computer which should not and could possibly interfere with it or my info. I scanned for viruses and spyware without results of malware. I have Webroot that has done a good job with a previous issue, but many scans and 2 trials GMER found nothing that I am aware. A scan MS run 3 times in safe mode did not find something or the other. I thought that this could be related to TWC.com Desktop so I deleted that and a script error that presented themselves. So I uninstalled everything that I could find that has been linked and script errors went away. This computer did not have a threat themselves in a scan with more than a score of level 1 (cookies) in the month. So why would this problem appear?

  Hello

  Provide us with more information on the power options you have defined on the computer.

  In addition, follow the steps from the link below and check if that helps: change what happens when you close your laptop: http://windows.microsoft.com/en-US/windows7/Change-what-happens-when-you-close-your-laptop

• MacBook Pro has started to randomly stop when it is on battery since the upgrade to El Capitan

  I have a MacBook Pro (15 inch, early 2011) which works very well on the Mountain Lion for a long time. I finally got round to upgrading to El Capitan last week: directly to 10.11.6. A few days later he just powered down without warning while I was working. He was so very well for a few days, but then made several times in the last 48 hours.

  I am moderately sure it happens only when it is on battery (it did not in the past hours 8 while that plugged). Whenever it happens, that there is no warning and the Mac then fine restarts (manually) - Although the clock resets always in 1970 until he can contact an NTP server. One of the curious side effects is that my PostScript fonts were blank on the screen in Excel for a few reboots yesterday but then OK once again!

  No hardware has changed. Major software change is only El Capitan and possibly an iStat Menus update.

  I have reset PRAM and SMC. I ran the short AHT. I disassembled the machine and clean the fans. they were OK, but the problem seems to occur when the Mac is hot.

  Spotlight and Time Machine sometimes seemed to be struggling for the upgrade, and I also saw rpcsvchost with 100% of a core for a while. The machine feels sometimes slow - but for the last 8 hours, it was very good. The only model that I put in place, is that it seems to occur only on battery; It's even happened then that the Dock (etc.) were loading after logging in after an unexpected shutdown.

  The other thing common is in the newspapers every time:

  Cause of previous stop:-128

  I scanned a number of related posts to aspects of it, but do not look at who blames El Capitan rather than material. Yet, many people reported this kind of problem after the upgrade... Coincidence?

  Any ideas?

  Thank you.

  Cause of previous stop:-128

  A negative stop code generally indicates a hardware failure. Have the Apple to assess your Mac. The fix may be as simple as a spare battery.

  Start here: contact support

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371

• After you have installed Windows 7 Ultimate, why is-from my laptop very high fan speed and battery remaining time very low?

  I installed the Service Pack 1 of Windows 7 Ultimate 64 bit on my laptop HP 1000. Since my cooling fan is almost went crazy and running at full speed all the time after in idle state for a half hour. The battery consumption also increased a lot.

  for example battery time was quite good before (3.4 hours) with fair use, but now he says 40 Minutes remaining with 50% battery left.

  There is no heavy process in the Task Manager.

  I have not installed a game or fancy software. (drivers & media players, browsers and photo viewers)

  Operating system: Service Pack Windows 7 Ultimate 64-bit (6.1, Build 7601)

  Model: HP 1000 Notebook PC

  BIOS: Version InsydeH2O 03.72.24F.12

  Processor: Intel Core i3-2370

  RAM: 2048MB RAM

  Need help.

  Thank you.

  Well until you install specific drivers of HP and no victory update drivers, you are flogging a dead horse, that its all controlled by the pilots of the system, not of victory

• Drag and drop more timer

  With the help of kglad.com, I got my work to deposit slip. Now, I've added a timer. I want students to have 45 seconds to finsih the game. I can code a timer OK, I even can't she jumps into a period of "time's up", with a reset button that takes you to where intro page for drag drop n.

  2 problems:

  • If you click on one of the visible navigation two btns on the n would be the page BEFORE the timer has stopped, you get an error.
    
  • I have no idea how to do to stop the timer after fishing the n is game within the time limit (either correctly place 12 pegs). As it is, you finish the game, a text field said "Congratulations!" (which is good), but you still get MTBF (which is bad).

  As always, thanks in advance - it is the last step of my small prototype edu soft.

  Here is the protruding part of the code (I think) and I deleted all the code that comes after the important part:

  var counter: Number = 0;

  var startX:Number;

  var startY: number;

  reparentedBalls = [];

  Stop();

  
  

  var: number = 45;

  var myTimer:Timer = new Timer(1000,count);

  myTimer.addEventListener (TimerEvent.TIMER, count);

  myTimer.start ();

  
  

  function countdown(event:TimerEvent):void {}

  myTime_txt.text = String ((count) - myTimer.currentCount);

  
  

  If (myTime_txt.text == "0") {}

  gotoAndStop ("timesup");

  }

  }

  
  

  
  

  
  

  restart_btn.addEventListener (MouseEvent.CLICK, restartClicked);

  function restartClicked(event:MouseEvent):void

  {

  SoundMixer.stopAll ();

  {if(reparentedBalls!=null)}

  for (var i: uint = 0; i < reparentedBalls.length; i ++) {}

  If (reparentedBalls [i]! = null & & reparentedBalls [i] .parent! = null) {}

  reparentedBalls [i].parent.removeChild (reparentedBalls [i]);

  }

  }

  }

  gotoAndStop ("play")

  }

  
  

  peg1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg4_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg4_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg5_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg5_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg6_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg6_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg7_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg7_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg8_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg8_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg9_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg9_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg10_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg10_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg11_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg11_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg12_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg12_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  function pickUp(event:MouseEvent):void {}

  event.target.startDrag (true);

  reply_txt. Text = "";

  event.target.parent.addChild (event.target);

  reparentedBalls.push (event.target);

  startX = event.target.x;

  startY = event.target.y;

  }

  function dropIt(event:MouseEvent):void {}

  event.target.stopDrag ();

  var myTargetName:String = "target" + event.target.name;

  var myTarget:DisplayObject = getChildByName (myTargetName);

  If (event.target.dropTarget! = null & & event.target.dropTarget.parent == myTarget) {}

  reply_txt. Text = "Good Job!"

  event.target.removeEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  event.target.removeEventListener (MouseEvent.MOUSE_UP, dropIt);

  event.target.buttonMode = false;

  Event.Target.x = myTarget.x;

  Event.Target.y = myTarget.y;

  counter ++;

  } else {}

  reply_txt. Text = "Try Again!";

  Event.Target.x = startX;

  Event.Target.y = startY;

  }

  if(Counter == 12) {}

  reply_txt. Text = "congratulations, you're done!"

  }

  }

  apply your stop() method in your reboot and home listeners and:

  var counter: Number = 0;

  var startX:Number;

  var startY: number;

  reparentedBalls = [];

  Stop();

  
  

  var: number = 45;

  var myTimer:Timer = new Timer(1000,count);

  myTimer.addEventListener (TimerEvent.TIMER, count);

  myTimer.start ();

  
  

  function countdown(event:TimerEvent):void {}

  myTime_txt.text = String ((count) - myTimer.currentCount);

  
  

  If (myTime_txt.text == "0") {}

  gotoAndStop ("timesup");

  }

  }

  
  

  
  

  
  

  restart_btn.addEventListener (MouseEvent.CLICK, restartClicked);

  function restartClicked(event:MouseEvent):void

  {

  SoundMixer.stopAll ();

  {if(reparentedBalls!=null)}

  for (var i: uint = 0; i<>

  {if(reparentedBalls[i]!=null&&reparentedBalls[i].parent!=null)}

  reparentedBalls [i].parent.removeChild (reparentedBalls [i]);

  }

  }

  }

  gotoAndStop ("play")

  }

  
  

  peg1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg4_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg4_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg5_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg5_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg6_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg6_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg7_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg7_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg8_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg8_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg9_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg9_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg10_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg10_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg11_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg11_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  peg12_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  peg12_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  function pickUp(event:MouseEvent):void {}

  event.target.startDrag (true);

  reply_txt. Text = "";

  event.target.parent.addChild (event.target);

  reparentedBalls.push (event.target);

  startX = event.target.x;

  startY = event.target.y;

  }

  function dropIt(event:MouseEvent):void {}

  event.target.stopDrag ();

  var myTargetName:String = "target" + event.target.name;

  var myTarget:DisplayObject = getChildByName (myTargetName);

  If (event.target.dropTarget! = null & event.target.dropTarget.parent == myTarget) {}

  reply_txt. Text = "Good Job!"

  event.target.removeEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  event.target.removeEventListener (MouseEvent.MOUSE_UP, dropIt);

  event.target.buttonMode = false;

  Event.Target.x = myTarget.x;

  Event.Target.y = myTarget.y;

  counter ++;

  } else {}

  reply_txt. Text = "Try Again!";

  Event.Target.x = startX;

  Event.Target.y = startY;

  }

  if(Counter == 12) {}

  reply_txt. Text = "congratulations, you're done!"

  MyEventArgs;
  

  }

  }

• Pavilion 10 TS F3F15UA #ABA: HP Pavilion 10 TS Notebook PC takes long time to start and does not

  I used the Windows Moviemaker app and suddenly the system became unstable and very slow. I tried to reboot several times. It takes about 15 minutes to restart the desktop and there is practically no response at all when I try to do anything on the machine. I am able to get Task Manager up and it shows 100% use of the disk.

  Should what steps I take to diagnose the problem?

  I'm tired of doing these steps on a computer that has worked less than 1% of the time so I just restored it from scratch and it seems to be ok now. I lost everything I had on this subject, but I can recreate it all by downloading things I need from the internet. Even make that a backup did not work as hard disk access was extremely slow or not available at all.

  Thanks for the help.

• When online, it takes more time to copy and paste something.

  Original title: copy paste

  When I'm online, while copying and pasting. Since the installation of the version of xp blade, it takes longer to copy paste something. I want to copy paste to work way is use too, faster and not loading in the bar each time trying to copy paste search something online? Thanks Guy

  Hello

  1. what browser do you use?

  2 are you facing the question that when you're online?

  If you use Internet Explorer (IE), then you try to optimize IE and check if it helps.

  For more information, please see the following article and check.

  Internet Explorer is slow? 5 things to try

  Check if the problem occurs in safe mode with network and let us know the results.

  A description of the options to start in Windows XP Mode